Answer:
By 1000 joules
Explanation:
Given
[tex]Weight = 500N[/tex]
[tex]Height = 2.0m[/tex]
Required
By how much does her GPA increases
To do this, we simply calculate the potential energy.
[tex]GPE = mgh[/tex]
Where
[tex]mg = Weight = 500N[/tex]
At the ground level, the height is 0
i.e. [tex]h = 0[/tex]
So:
[tex]GPE = 500N * 0 = 0[/tex]
At:
[tex]h = Height = 2.0m[/tex]
So, we have:
[tex]GPE = mgh[/tex]
[tex]GPE = 500N * 2.0m[/tex]
[tex]GPE = 1000J[/tex]
Calculate the difference
[tex]\triangle GPE = 1000J - 0J[/tex]
[tex]\triangle GPE = 1000J[/tex]
Hence, it increases by 1000 joules
In 1960, the US Navy sent the submersible Trieste to the bottom of the Marianas Trench 11,000m deep. What was the force on the small 15cm diameter circular viewing window?
Answer:
P = d g h pressure = density * g * depth
P = 1000 kg/m^3 * 9.8 m / s^2 * 1.1 * 10E4 m = 1.1 * 10E8 N/m^2
F = P * A = 1.1 * 10E8 N/m^2 * pi * .075^2 / m^2 = 1.9 * 10E6 N/m^2
Please answer all three answers
Answer:
I. The rock that has the most kinetic energy is rock 3.
II. Rock 3 has the most kinetic energy because it weighs the highest among the rocks i.e it has the highest amount of mass. Also, the mass of an object is directly proportional to the kinetic energy possessed by the object; the higher the mass, the higher the kinetic energy.
III. Kinetic energy is taking place rather than potential energy because the rocks are in motion i.e rolling down a hill.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
From the above, we can deduce the following;
I. The rock that has the most kinetic energy is rock 3.
II. Rock 3 has the most kinetic energy because it weighs the highest among the rocks i.e it has the highest amount of mass. Also, the mass of an object is directly proportional to the kinetic energy possessed by the object; the higher the mass, the higher the kinetic energy.
III. Kinetic energy is taking place rather than potential energy because the rocks are in motion i.e rolling down a hill.
If someone replenishes the tree population in a forest ecosystem, how
might this affect the producers already living there?*
Answer: Increase in competition for abiotic factors.
Explanation: Resource availability is one of the main factors determining the ecological dynamics of populations or species. Fluctuations in resource availability can increase or decrease the intensity of resource competition. Resource availability and competition can also cause evolutionary changes in life-history traits
IM BEGGING ILL GIVE BRAINLEST PLEASEEEEEEE HELP ME Distance and amount of charge are factors that determine which of the
following quantities?
A. Electrostatic force
B. Electric potential
C. Electric potential energy
D. All of the above
Explanation:
Distance and amount of charge are factors that determine which of the
following quantities?
D. All of the above
A 10.0 N package of whole wheat flour is suddenly placed on the pan of a scale such as you find in grocery stores. The pan is supported from below by a vertical spring of force constant 395 N/m. If the pan has negligible weight, find the maximum distance the spring will be compressed if no energy is dissipated by friction.
Answer:
0.025 m
Explanation:
From the question,
Applying Hook's law
F = ke................... Equation 1
Where F = Force, k = spring constant of the scale, e = maximum distance at which the spring will compress.
make e the subject of the equation
e = F/k....................... Equation 2
Given: F = 10 N, e = 395 N/m
Substitute these values into equation 2
e = 10/395
e = 0.025 m
The concept of photons applies to which regions of the electromagnetic spectrum?
A. visible light only
B. infrared light, visible light, and UV light only
C. X-rays and gamma rays only
D. all regions of the spectrum
Answer:
D. all regions of the spectrum
Explanation:
I did some research ; )
Help answer question in picture
A man stands by a railway track.
A train travelling at 40 m/s takes 2.0 s to pass the man.
What is the length of the train?
40 m
D
80m
A 20m
B 38 m
Answer:
length of train is 80m
Explanation:
40*2
In Figure (a), both batteries have em - 1.20 V and the external resistance R is a variable resistor. Figure (6) gives the electric potentials V between the terminals of each battery as functions of
Curve 1 corresponds to battery 1, and curve 2 corresponds to battery 2. The horizontal scale is set by R, -0.500 . What is the internal resistance of (a) battery 1 and (b) battery 2?
0.60
V(V)
0
-0.350
(
R(0)
(6)
Answer:
i know da way ese'
Explanation:
6.
3. A 7.6 kg object is pulled 6.0 m at a constant
velocity of 5.0 m/s along a horizontal surface by
a force of 2.0 N. What is the work done on the
object to overcome friction?
Answer:
12 J
Explanation:
From the question given above, the following data were obtained:
Mass (m) = 7.6 kg
Distance (d) = 6 m
Velocity (v) = 5 m/s
Force (F) = 2 N
Workdone (Wd) =.?
Workdone can be defined as the product of force and distance moved in the direction of the force. Mathematically, it is expressed as:
Workdone = Force × distance
Wd = F × d
With the above formula, we can obtain the workdone as follow:
Distance (d) = 6 m
Force (F) = 2 N
Workdone (Wd) =.?
Wd = F × d
Wd = 2 × 6
Wd = 12 J
Thus, the workdone is 12 J
Why is it that when riding in a car, you don't feel like you're moving?
This may shock you:
We NEVER feel speed, velocity, or motion, as long as it's constant.
We only feel CHANGES in speed, velocity, or motion.
That means speeding up, slowing down, or changing direction.
As long as we're moving in a straight line at a constant speed, we don't feel anything.
⦁ A certain resistor is required to dissipate 0.25 W, what standard rating should be used?
Answer:A
Explanation:
During a soccer game, a player grabs and holds an opponent's shirt outside of the penalty box. After the foul is called, what kick is awarded to put the ball back into play?
a
Penalty Kick
b
Indirect Free Kick
c
Kickoff
d
Direct Free Kick
Positioning a iron core in the middle of a current carrying solenoid creates:
a. A dipole
b. An electromagnet
c. Induced current
d. Mutual inductance
e. A natural magnet
Answer:
d
Explanation:
middle of a current carrying solenoid creates Mutual inductance
3. Jose and Luke raced as they climbed to the top of the bleachers. Jose reached the top in 12.6 s and
Luke reached the top in 13.3 s. Jose and Luke have the same mass,
Who did more work?
How do you know?
Who had more power?
How do you know?
Answer:
jose
Explanation:
Jose run faster and did more work
because the time Jose took to accomplish the activity is less than Luke
both
both have same mass
The work done by both Jose and Luke is same because the change in potential energy is same.
The power of Jose is greater than than of Luke because Jose takes less time to do the same work.
What is power?Power is defined in physics as the amount of energy transferred or converted per unit time. The watt is the unit of power in the International System of Units, equal to one joule per second. Power is sometimes referred to as activity in older works. A scalar quantity is power.
Let the mass of each of them is m.
Hence, work done by each of them = mgh ( same for both of them)
As Jose reached the top in 12.6 s and Luke reached the top in 13.3 s.
Power of Jose = mgh/12.6
Power of Luck = mgh/13.3
Hence, Power of Jose is greater than Power of Luck.
Learn more about power here:
https://brainly.com/question/29575208
#SPJ2
A gun whose mass is 0.8 kg fires a bullet
whose mass is 0.016 kg with a velocity of
700 ms Calculate the velocity of the gun's
recoil
Answer:
14m/s
Explanation:
As per Newton's third law, the momentum of the bullet firing will equal the momentum of the guns recoil:
[tex]m_{g}v_{g} = m_{b}v_{b}[/tex]
(.8)v=(.016)(700)
v=11.2/0.8
v=14m/s
A 1,571 kilogram car travelling at 129 kilometers per hour is driving down a highway. The driver suddenly realizes a large animal is standing stationary on the highway in the way of the car. The driver manages to release their foot off the accelerator peddle, but does not have time to hit the brake peddle. The car strikes the animal which gets stuck to the car hood. Immediately after the collision the car slows to 59 kilometers per hour. Given this information, accident investigators are able to determine the mass of the animal as what
Answer:
[tex]1863.9\ \text{kg}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of car = 1571 kg
[tex]u_1[/tex] = Initial velocity of car = 129 km/h
[tex]u_2[/tex] = Initial velocity of the animal = 0
[tex]v[/tex] = Velocity of combined mass = 59 km/h
[tex]m_2[/tex] = Mass of the animal
As the momentum of the system is conserved we have
[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow \dfrac{m_1u_1+m_2u_2}{v}-m_1=m_2\\\Rightarrow m_2=\dfrac{1571\times 129+0}{59}-1571\\\Rightarrow m_2=1863.9\ \text{kg}[/tex]
The mass of the animal is [tex]1863.9\ \text{kg}[/tex].
how did we compensate for friction ?
If a force of 20kN acts on a circular rod of diameter 10mm, calculate the stress in the
rod.
The stress in the rod is equal to [tex]2.55 \times 10^8\;N/m[/tex]
Given the following data:
Force = 20 kN = 20,000 NewtonDiameter = 10 mm to m = 0.01 meterTo calculate the stress in the rod:
First of all, we would determine the area of the rod by using this formula:
[tex]Area = \frac{\pi d^2}{4} \\\\Area = \frac{3.142 \times 0.01^2}{4}[/tex]
Area = 0.00007855 meter.
Mathematically, stress is given by this formula:
[tex]Stress = \frac{Force}{Area}[/tex]
Substituting the given parameters into the formula, we have;
[tex]Stress = \frac{20000}{0.00007855} \\\\Stress = 2.55 \times 10^8\;N/m[/tex]
Read more: https://brainly.com/question/14468674
Question /
Which object is shown below?
A. Convex mirror
B. Convex lens
C. Concave lens
D. Concave mirror
SLIDNAT
if you use a 1500 watt sound system for 5 hours a day , calculate the amount of electricity used
Answer:
Our appliance and electronic energy use calculator allows you to estimate your ... using the formulas provided below; Installing a whole house energy monitoring system. ... energy consumption a few watt-hours, and you can use a monitor to estimate those too. ... Estimate the number of hours per day an appliance runs.
Explanation:
When putting the ball on the tee you want half of the golf ball to be above the club be below the club be in front of the club be behind the club
will put brainlest
A golf ball is a unique ball made specifically for the game of golf.
What is Gulf ball?A golf ball must adhere to specific velocity, distance, and symmetry requirements as well as have a mass of no more than 1.620 oz (45.9 g), a diameter of no less than 1.680 inches (42.7 mm), and no more than 1.620 oz (45.9 g) in total.
Similar to golf clubs, golf balls must pass testing and approval by The R&A and the United States Golf Association before they can be used in competitions.
Early in the 20th century, it was discovered that dotting the ball gave the player even more control over the trajectory, flight, and spin of the ball.
Therefore, A golf ball is a unique ball made specifically for the game of golf.
To learn more about Golf ball, refer to the link:
https://brainly.com/question/263622
#SPJ6
In the winter activity of tubing, riders slide down snow covered slopes while sitting on large inflated rubber tubes. To get to the top of the slope, a 2.50 kg tube, is pulled at a constant speed by a tow rope that maintains a constant tension of 12.0 N along the direction of the slope. How much thermal energy is created in the slope and the tube during the ascent of a 6.31-m-high, 52.3-m-long slope, in Joule
Answer:
≈ 473 J
Explanation:
m ( mass ) = 2.5 kg
T ( tension ) = 12 N
v = constant
h ( height ) = 6.31 m
d ( diameter ) = 52.3 m
Determine how much thermal energy is created
considering that external force acts on the system
ΔE = W and this can be rewritten as
mgh + ΔEth = W --------- ( 1 )
where ΔEth = amount of thermal energy created
also ; W = Fd cos ∅, hence Work done by Tension force (w) = Td cos 0 = Td
back to equation ( 1 )
mgh + ΔEth = Td
ΔEth = Td - mgh
= ( 12 * 52.3 ) - ( 2.5 * 9.8 * 6.31 )
≈ 473 J
What is the similarity between pushing and lifting? What is the difference?
Answer:
the similarity is that hands are applied and force
4. Which of the following accurately pairs the part of an atom to its charge?
O A. Neutron-positive charge
O B. Electron-negative charge
O C. Proton-no charge
O D. Electron-no charge
Answer:
B Electrons are negatively charged while protons are positively charged
Which combination of alleles would produce a recessive trait?
TT
tt
or Tt
The diagram represents two charges, q1 and q2 separated by a distanced "d" which change would produce the greatest increase in the electrical force between the two charges?
between the two charges?
Answer:
The diagram represents two charges, q1 and q2, separated by a distance d. Which change would produce the greatest increase in the electrical force between the two charges? *
Explanation:
doubling charge q1, only
Doubling the charge q would produce the greatest increase in the electrical force between the two charges.
The value of the electrostatic force of interaction between two point charges is directly proportional to the scalar multiplication of the charges and inversely proportional to the square of the distance between them.
How would you define an Electrical force?
The repulsive or attractive interaction between any two charged bodies is called as an electric force. Similar to any force, its impact and effects on the given body are described by Newton’s laws of motion. The electric force is among the list of other forces that exert over objects.
Learn more about Electric force:
https://brainly.com/question/16765199
5. What is the period of a vertical mass-spring system that has an amplitude of
71.3 cm and maximum speed of 7.02 m/s? The spring constant is 12.07 N/m.
The period of the vertical mass-spring is 0.64 s.
The given parameters:Amplitude of the spring, A = 71.3 cm Maximum speed of the spring, V = 7.02 m/sSpring constant, k = 12.07 N/mThe angular speed of the vertical mass-spring is calculated as follows;
[tex]V_{max} = A \omega\\\\\omega = \frac{V_{max}}{A} \\\\\omega = \frac{7.02}{0.713} \\\\\omega = 9.85 \ rad/s[/tex]
The period of the vertical mass-spring is calculated as follows;
[tex]f = \frac{\omega }{2\pi} \\\\T = \frac{1}{f} \\\\T = \frac{2 \pi}{\omega } \\\\T = \frac{2\pi }{9.85} \\\\T = 0.64 \ s[/tex]
Thus, the period of the vertical mass-spring is 0.64 s.
Learn more about period of oscillation here: https://brainly.com/question/20070798
PLEASE HELPPPPPP <333
Answer:
Explanation:
The answer is c. I am very sure
Answer:
i think its b
Explanation:
im not very sure
8.
A
2.0 m
A 1.0 kg box slides without friction around the
loop-the-loop apparatus as shown in the
diagram. If the object starts from rest at point A,
and the radius of the loop is 0.75 m, what is the
speed of the box at point B?
Answer:
6.26 m/s
Explanation:
From the given information:
Using the conservation of Energy;
M.E at A =M.E at B
[tex]\dfrac{1}{2}mv_A^2 + mgh _A = \dfrac{1}{2}mv_B^2 + mgh_B[/tex]
Replacing the values given in the equation:
[tex](1) (9.8) (2 \ m) +\dfrac{1}{2}(0)^2 = 1 \times 9.8 \times 0 + \dfrac{1}{2}(1) \times v_B^2 \\\\ 19.6 + 0 = 0 + 0.5v_B^2\\ \\ v_B^2 = \dfrac{19.6}{0.5} \\ \\ v_B^2 = 39,2 \\ \\ v_B = \sqrt{39.2} \\ \\ \mathbf{v_B = 6.26 \ m/s}[/tex]