what vehicle are runaway ramps designed for​

Answer:

h = 2.15 m

Explanation:

Given that,

Mass of the child, m = 35 kg

The child reaches the bottom at a speed of 6.5 m/s

We need to find the height slide by a frictionless playground slide. Let it is equal to h. Using the conservation of energy to find it as follows :

[tex]\dfrac{1}{2}mv^2=mgh\\\\h=\dfrac{v^2}{2g}\\\\h=\dfrac{(6.5)^2}{2\times 9.8}\\\\h=2.15\ m[/tex]

So, it will slide to a height of 2.15 m

The height slid by the frictionless playground can be calculated by equating the kinetic and potential energy equations which is 2.16 meters

K.E = P.E

K. E = 0.5mv² ; P.E = mgh

0.5mv² = mgh

gh = 0.5v²

h = [(0.5v²) ÷ g]

h = [(0.5 × 6.5²) ÷ 9.8]

h = (21.125 ÷ 9.8)

h = 2.155 m

Therefore, the height slid by a frictionless playground is 2.16 meters

Learn more : https://brainly.com/question/20273577

Answer:

1730nm

Explanation:

Observed wavelength λ= 1.9 millimeters

Red shift of photons = 1100

Emitted wavelength = λo

Red shift = λ - λo/ λo = 1100

= [(1.9x10^-3 - λo)/ λo] = 1100

= 1.9x10^-3 - λo = 1100 λo

= 1.9x10^-3 = 1100 λo + λo

= 1.9x10^-3 = 1101 λo

We divide through by 1101 to get the value of lambda

1.9x10^-3/1101 = λo

λo = 0.000001726

λo = 1726nm

This is approximately

λo = 1730nm

Thank you!

Explanation:dropped stone hits water:

24.4-4.9t^2=0

t=2.23

stone has fallen 6.6m:

4.9t^2 = 6.6

t = 1.16

So, Jill's thrown stone only has 2.23-1.16=1.07 seconds to hit the water:

24+1.07v-4.9*1.07^2 = 0

v = -17.19 m/s

Both the rocks hit the water at the exact same time, and the initial velocity of Jill's rock will be -19.28 m/s.

A vector measurement of the rate and direction of motion is what is meant by the term "velocity." Simply said, velocity is the rate of movement in a single direction. Velocity may be used to gauge both the speed of a rocket launching into space and the speed of a car travelling north on a busy freeway.

According to the question, initial velocity will be 0.

By using equation of motion :

Let Jill is x and Jack is y.

s=ut+1/2at² where,

a is acceleration,

u is initial velocity and,

t is the time period.

23.4=(-1/2)(9.8)×t²

t(y)=[tex]\sqrt{(23.4)/(4.9)}[/tex]

=2.185 seconds.

Time taken by Jack's stone that it travel the first 7.2 meters.

t=[tex]\sqrt{(2*7.2)/9.8}[/tex] =1.21 seconds.

So, time taken by stone thrown by jack,

t(Jill)=t(jack)-t

=23.4=-ut(x)-1/2(gt²)(y)

-23.4=(-u×0.975)-(1/2×9.8×(0.975)²)

u= -(23.4-4.6/0.975)

u=-19.28 m/s

Hence, the initial velocity of the Jill's stone will be -19.28 m/s.

To get more information about velocity :

https://brainly.com/question/18084516

#SPJ2

Answer:

Explanation:

The acceleration of an object given it's mass and the force acting on it can be found by using the formula

[tex]a = \frac{f}{m} \\ [/tex]

where

f is the force

m is the mass

From the question we have

[tex]a = \frac{12}{4} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

1.6m

Explanation:

Using the spring equation, which is as follows:

F = Kx

Where; F = force applied on the spring (N)

K = spring constant (3kg/s²)

x = extension of spring (m)

However, Force applied by object = mass × acceleration (9.8m/s²)

F = 0.49kg × 9.8m/s²

F = 4.802N

Since, F = 4.802N

F = Kx

4.802 = 3 × x

4.802 = 3x

x = 4.802/3

x = 1.6006

x = 1.6m

The spring is stretched i.e. the extension of the spring, by 1.6m

Answer:

When the ball is on the frictionless side of the track , the angular speed is 89.7 rad/s.

Explanation:

Consider the ball is a solid sphere of radius 3.8 cm and mass 0.14 kg .

Given ,  mass, m=0.14 kg

Ball is released from rest at a height of, h= 0.83 m

Solid sphere of radius, R = 3.8 cm

                                       =0.038 m

From the conservation of energy

                          ΔK  = ΔU  

                [tex]\frac{1}{2}mv^2 +\frac{1}{2} I\omega^2=mgh[/tex]

Here , [tex]I=\frac{2}{5} MR^2 , v= R \omega[/tex]

  [tex]\frac{1}{2}mv^2\frac{1}{2}(\frac{2}{5}MR^2)(\frac{v}{R^2} )=mgh[/tex]

  [tex]\frac{1}{2} [v^2+\frac{2}{5}v^2]= gh[/tex]

[tex]\frac{7}{10} v^2=gh[/tex]

[tex]0.7v^2=gh[/tex]

 v=[tex]\sqrt{[gh/(0.7)][/tex]

=[tex]\sqrt{ [(9.8 m/s^2)(0.83 m) / (0.7) ][/tex]

= 3.408 m/s

Hence, angular speed when it is on the frictionless side of the track,

[tex]\omega=\frac{v}{R}[/tex]

   = (3.408 m/s)/(0.038 m)

[tex]\omega[/tex]   =  89.7 rad/s

Hence , the angular speed is 89.7 rad/s

Answer:

425.1 W

Explanation:

We are given;

Counter mass of elevator; m_c = 940 kg

Cab mass of elevator; m_d = 1200 kg

Distance from rest upwards; d = 35 m

Time to cover distance; t = 3.5 min

Now, this elevator will have 3 forces acting on it namely;

Force due to the counter weight of the elevator; F_c

Force due to the cab weight on the elevator; F_d

Force exerted by the motor; F_m

Now, from Newton's 2nd law of motion,

The force exerted by the motor on the elevator can be given by the relationship;

F_m = F_d - F_c

Now,

F_d = m_d × g

F_d = 1200 × 9.81

F_d = 11772 N

F_c = m_c × g

F_c = 940 × 9.81

F_c = 9221.4 N

Thus;

F_m = 11772 - 9221.4

F_m = 2550.6 N

Now, the average power required of the force the motor exerts on the cab via the cable is given by;

P_m = F_m × v

Where v is the velocity of the elevator.

The velocity is calculated from;

v = distance/time

v = 35/3.5

v = 10 m/min

Converting to m/s gives;

v = 10/60 m/s = 1/6 m/s

Thus;

P_m = 2550.6 × 1/6

P_m = 425.1 W

Answer:

t = 9.25 s

Explanation:

Given that,

Initial angular velocity, [tex]\omega_o=0[/tex] (at rest)

Final angular velocity, [tex]\omega_o=0.25\ rad/s[/tex]

Angular acceleration, [tex]\alpha =0.027\ rad/s^2[/tex]

We need to find the time it take the wheel to come up to operating speed. We know that the angular acceleration in terms of angular speed is given by :

[tex]\alpha =\dfrac{\omega_f-\omega_o}{t}\\\\t=\dfrac{\omega_f-\omega_o}{\alpha }\\\\t=\dfrac{0.25-0}{0.027}\\\\t=9.25\ s[/tex]

So, it will reach up to the operating speed in 9.25 s.

correct answer is mass media is correct answer OK

Answer:

A force of 1.788 newtons is exerted on one side of the sheet of paper by the atmosphere.

Explanation:

From definition of pressure, we get that force exerted by the atmosphere ([tex]F[/tex]), measured in newtons, on one side of the sheet of paper is given by the expression:

[tex]F = P_{atm}\cdot w\cdot l[/tex] (Eq. 1)

Where:

[tex]P_{atm}[/tex] - Atmospheric pressure, measured in pascals.

[tex]w[/tex] - Width of the sheet of paper, measured in meters.

[tex]l[/tex] - Length of the sheet of paper, measured in meters.

If we know that [tex]P_{atm} = 101325\,Pa[/tex], [tex]w = 0.353\,m[/tex] and [tex]l = 0.05\,m[/tex], then the force exerted on one side of the sheet of paper is:

[tex]F = (101325\,Pa)\cdot (0.353\,m)\cdot (0.05\,m)[/tex]

[tex]F = 1.788\,N[/tex]

A force of 1.788 newtons is exerted on one side of the sheet of paper by the atmosphere.

Given :

Force on object moving with constant velocity due to magnetic field is given by :

[tex]\vec{F}=q\vec{v}\times \vec{B}\\\\\vec{F}=-5[ ( \hat{i} + 7\hat{j}) \times ( 10\hat{k})]\\\\\vec{F}=-5[ 10(-\hat{j})+70(\hat{i})]\\\\\vec{F}=50\hat{j}-350\hat{i}\ N[/tex]

Now,

[tex]F = \sqrt{50^2+350^2}\\\\F=353.55\ N[/tex]

Hence, this is the required solution.

A particle with charge q = +5.00 C that is moving with some velocity, then the magnetic force vector on the particle will be 353.55 N.

The phrase "vector" in physics and mathematics is used popularly to refer to some values that cannot be stated by a simple integer (a scalar) or to certain elements of high - dimensional space.

For things like displacements, forces, and velocity can have both a magnitude and direction, vectors were initially introduced in geometry and physics. Similar to how lengths, masses, and time are represented by real numbers, these quantities were represented by geometric vectors.

In some contexts, tuples—finite sequences of numbers with a definite length—are sometimes referred to as vectors.

From the data given in the question,

F = qv × B

F = -5 [(î +7 ĵ) ×(10 k)]

F = 50 ĵ - 350 î N

Now, calculate the force,

F = √50² + 350²

F = 353.55 N.

To know more about Vector:

https://brainly.com/question/13322477

#SPJ5

Answer:

The friction force exerted by the surface is 490 newtons.

Explanation:

From Physics, we remember that static friction force ([tex]f_{s}[/tex]), measured in newtons, for a particle on a horizontal surface is represented by the following inequation:

[tex]f_{s} \leq \mu_{s}\cdot m \cdot g[/tex] (Eq. 1)

Where:

[tex]\mu_{s}[/tex] - Static coefficient of friction, dimensionless.

[tex]m[/tex] - Mass of the crate, measured in kilograms.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

If [tex]f_{s} = \mu_{s}\cdot m \cdot g[/tex], then crate will experiment an imminent motion. The maximum static friction force is:  ([tex]\mu_{s} = 0.6[/tex], [tex]m = 100\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex])

[tex]f_{s} = (0.6)\cdot (100\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)[/tex]

[tex]f_{s} = 588.42\,N[/tex]

From Newton's Laws we get that current force of friction as reaction to the pulling force done by the worker on the crate is:

[tex]\Sigma F = F-f = 0[/tex]

[tex]f = F[/tex] (Eq. 2)

Where:

[tex]F[/tex] - Horizontal force done by the worker, measured in newtons.

[tex]f[/tex] - Static friction force, measured in newtons.

If [tex]F = 490\,N[/tex], then the static friction force exerted by the surface is:

[tex]f = 490\,N[/tex]

Given that [tex]f < f_{s}[/tex], the crate does not change its state of motion. The friction force exerted by the surface is 490 newtons.  

Answer:

Kindly check explanation

Explanation:

Change in momentum:

m(v - u)

M = mass = 1500kg

v = final velocity = 0 m/s

u = initial velocity = 8m/s

Momentum = 1500(8 - 0)

Momentum = 1500 * 8

Momentum = 12000 kgm/s

B.) impulse that acts on the car

Impulse = Force * time

Impulse = change in momentum with time

Impulse = m(v - u)

Hence, impulse = 12000Ns

C.) Average force action on the car during collision

Impulse = Force * time

12000 = force * 0.6

12000/ 0.6 = force

Force = 20000 N

D.) Workdone by haystack in stopping the car :

Workdone = Force * Distance

Distance = speed * time

Distance = 8 * 0.6

Distance = 4.8m

Hence,

Workdone = 20,000 * 4.8 = 96000 J

Answer:

Explanation:

angular acceleration ω = 8 rad /s²

tangential acceleration a = angular acceleration x radius of circle of rotation

For a point on the end of the rod , radius of circle = L .

tangential acceleration = 8 L .

For  a point a distance L/2 from the end of the rod, radius of circle = L /2 .

tangential acceleration = 8 L/2 = 4 L  .

It is so because angular acceleration will be same for this point , only radius changes .

required ratio = 8L / 4L

= 2.

Answer:

The answer is below

Explanation:

a) Using the formula:

[tex]\omega^2=\omega_o^2+2\alpha \theta\\\\\omega=final\ velocity=15\ rev/s,w_o=initial\ velocity=4.4\ rev/s, \\\theta=distance=60\ rev\\\\Substituting:\\\\15^2=4.4^2+2(60)\alpha\\\\2(60)\alpha=15^2-4.4^2\\\\2(60)\alpha=205.64\\\\\alpha=1.71\ rev/s^2[/tex]

b) The disk is initially at rest. Using the formula:

[tex]\theta=\omega_ot+\frac{1}{2}\alpha t^2 \\\\but\ \omega_o=0(rest), \theta=60\ rev,\alpha=1.71\ rev/s^2\\\\Subsituting:\\\\60=0+\frac{1}{2}(1.71) t^2\\\\t=8.4\ s[/tex]

c)

[tex]\omega=\omega_o+\alpha t \\\\but\ \omega_o=0(rest), \omega=4.4 \ rev/s\ rev,\alpha=1.71\ rev/s^2\\\\Subsituting:\\\\4.4=1.71t\\\\t=2.6\ s[/tex]

d)

[tex]\omega^2=\omega_o^2+2\alpha \theta\\\\\omega=final\ velocity=4.4\ rev/s,w_o=initial\ velocity=0\ rev/s, \\\alpha=1.71\ rev/s^2\\\\Substituting:\\\\4.4^2=0+2(1.71)\theta\\\\19.36=3.42\theta\\\\\theta=5.66\ rev[/tex]

Answer:

1. force applied southward = -4 j

force applied eastward = 5 i

total force applied = 5i - 4j

magnitude of total force applied = √(5)²+(-4)²

magnitude of total force applied = √25 + 16 = √41

magnitude of total force applied = 6.4N

But the beach ball also weighs 4 N,

which means that a force of 4N is required to overcome the inertia of the ball

Net force applied on the ball = total force applied - force applied by inertia

Net force applied on the ball = 6.4 - 4

Net force applied on the ball = 2.4 N

Mass of the ball:

Mass of the ball = weight of the ball / gravitational constant

Mass of the ball = 4 / 9.8 = 0.4 kg

Acceleration of Ball:

from newton's second law of motion:

F = ma

replacing the variables

2.4 = 0.4 * a          (where a is the acceleration of the ball)

a = 2.4/0.4

a = 6 m/s²

2. Mass of astronaut = 70 kg

Weight of Earth:

Weight = Mass * acceleration due to gravity

Weight = 70 * 9.8

Weight = 686 N

Weight on Moon:

Weight = Mass * acceleration due to gravity

Weight = 70 * 1.6                             (we are given that g = 1.6 on moon)

Weight = 112 N

Weight on Venus:

Weight = Mass * acceleration due to gravity

Weight = 70 * 18.7                         (we are given that g = 18.7 on Venus)

Weight = 1309 N

Answer:

μ = 0.2041

Explanation:

Given

[tex]a = -2m/s^2[/tex]

Required

Determine the coefficient of friction (μ)

The acceleration is negative because it is decreasing.

Solving further, we have that:

[tex]F_f =[/tex] μmg

Where

μ = Coefficient of kinetic friction

[tex]F_f = ma[/tex]

So, we have:

ma = μmg

Divide both sides by m

a = μg

Substitute values for a and g

2 = μ * 9.8

Solve for μ

μ = 2/9.8

μ = 0.2041

Answer:

a and c

Explanation:

Answer:

The tension in the rope is 588 N

Explanation:

I have attached a free body diagram of the problem.

First we calculate the force applied downwards by the person's weight:

[tex]F_{weight} =m*a = 80 kg * 9.8 \frac{m}{s^{2}} = 784 N[/tex]

If the scale reads a 25% of the person' weight:

[tex]F_{Scale} = F_{weight}*0.25=784N*0.25=196N[/tex]

which is the same value (but opposite) to the effective weight of the persons ([tex]F_{Person}=-F_{Scale}[/tex])

The other 75% of the total weight is the force of the rope pulling the person upwards.

[tex]F_{Pull}= F_{weight}*0.75=784N*0.75=588N[/tex]

To verify, we can use 1st Newton's law

∑F = 0

[tex]F_{Rope}-F_{Pull}+F_{Person}-F_{Scale}=0 \\588N-588N+196N-196N=0[/tex]

Answer:

200 kilometers per hour =

55.556 meters per second

Explanation:

have a great day

Answer:

200km × 1000m/1km = 200000 m

1h × 60 mins/h × 60sec/min = 3600s

now you divide 200000m/3600s

= 55.55m/s

Answer:

True

Explanation:

Answer:

A)90°

Explanation:

ufl.edu A wire of length 27.7 cm carrying a current of 4.11 mA is to be formed into a circular coil and placed in a uniform magnetic field of magnitude 5.85 mT. The torque on the coil from the field is maximized. (a) What is the angle between and the coil's magnetic dipole moment? (b) What is the number of turns in the coil? (c) What is the magnitude of that maximum torque?

(a) What is the angle between and the coil's magnetic dipole moment.

The angle between and the coil's magnetic dipole moment is 90°, because it is perpendicular to the field since there is maximum torgue.

(b) What is the number of turns in the coil?

Answer:

0.344 m/s^2

Explanation:

The first step is to calculate V

V= distance /time

= 2/1.45

= 1.379 m/s

Therefore the acceleration of the block can be calculated as follows

a= V - U/2d

= 1.379 - 0/2×2

= 1.379/4

= 0.344 m/s^2

Explanation:

Speed - The rate at which something moves

Velocity - The speed of something in a specific direction

Velocity is kind of a specific type of speed.

Answer:

Rₓ = 1562.5 Ω

Explanation:

The formula for the wheat stone bridge in balanced condition is given as follows:

R₁/R₂ = R₃/Rₓ

where,

Rₓ = Unknown Resistance = ?

R₃ = 2500 Ω

R₂/R₁ = 0.625

R₁/R₂ = 1/0.625 = 1.6

Therefore,

1.6 = 2500 Ω/Rₓ

Rₓ = 2500 Ω/1.6

Rₓ = 1562.5 Ω

Answer:

A OR C

Nearly A.

Explanation:

Answer:

[tex]\alpha =240.79\ rad/s^2[/tex]

Explanation:

Given that,

Initial angular velocity, [tex]\omega_i=0[/tex]

Final angular velocity, [tex]\omega_f=16740\ rev/min = 1753\ rad/s[/tex]

We need to find the angular acceleration of the drill. It is given by the formula as follows :

[tex]\alpha =\dfrac{\omega_f-\omega_i}{t}\\\\\alpha =\dfrac{1753-0}{7.28}\\\\\alpha =240.79\ rad/s^2[/tex]

So, the angular acceleration of the drill is [tex]240.79\ rad/s^2[/tex].

Answer:

74 m.

Explanation:

From the question given above, the following data were obtained:

Height (h) = 186 m

Initial velocity (u) = 12 m/s

Horizontal distance (d) =?

Next, we shall determine the time taken for the rock to get to the ground. This can be obtained as follow:

Height (h) = 186 m

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =?

H = ½gt²

186 = ½ × 9.8 × t²

186 = 4.9 × t²

Divide both side by 4.9

t² = 186/4.9

Take the square root of both side

t = √(186/4.9)

t = 6.16 s

Thus, the time taken for the rock to get to the ground is 6.16 s

Finally, we shall determine the horizontal distance travelled by the rock as follow:

Initial velocity (u) = 12 m/s

Time (t) = 6.16 s

Horizontal distance (d) =?

Horizontal distance (d) = Initial velocity (u) × Time (t)

d = u × t

d = 12 × 6.16

d = 73.92 ≈ 74 m

Therefore, the horizontal distance travelled by the rock is 74 m