what is a molecule containing only carbon and hydrogen called?

Answer:

[tex]2.03~g~Ag_2S[/tex]

Explanation:

For this question we have to start with the reaction:

[tex]Ag~+~H_2S~+~O_2~->~Ag_2S~+~H_2O[/tex]

Now, we can balance the reaction, so:

[tex]4Ag~+~2H_2S~+~O_2~->~2Ag_2S~+~2H_2O[/tex]

With this in mind, we have to start with the amount of [tex]H_2S[/tex]. The first step is to convert from grams to moles. For this, we need to find the molar mass of [tex]H_2S[/tex]. If we check the periodic table we will find the atomic masses for Ag and H; H: 1 g/mol and A: 32 g/mol, so:

(1*2)+ (32*1) = 34 g/mol.

Now we can calculate the moles of [tex]H_2S[/tex]:

[tex]0.280~g~H_2S\frac{34~g~H_2S}{1~mol~H_2S}=0.0082~mol~H_2S[/tex]

With the moles of [tex]H_2S[/tex] we can calculate the moles of [tex]Ag_2S[/tex] if we check the molar ratio in the balanced equation, [tex]2~mol~H_2S=2~mol_Ag_2S[/tex], so:

[tex]0.0082~mol~H_2S\frac{2~mol_Ag_2S}{2~mol~H_2S}=0.0082~mol~H_2S[/tex]

With the molar mass of [tex]Ag_2S[/tex] we can convert from moles to grams (Ag: 107.86 g/mol, S: 32 g/mol), so:

(107.86*1)+(32*2)=247.80 g/mol

[tex]0.0082~mol~H_2S\frac{247.8~g~Ag_2S}{1~mol~H_2S}=2.03~g~Ag_2S[/tex]

I hope it helps!

Answer:

The volume of the sample given is 850 ml, the density given is 0.79 gram per cm. Now the weight of the sample will be,  

Weight = volume × density = 850 × 0.79  

= 671.5 grams

Weight of the suspended solids given is 0.001 gram

The concentration of the sample can be determined by using the formula,  

Concentration = wt. of sample/volume

= [671.5 - 0.001) 10³ mg / 0.85 L

= 789998.82 mg/L or 789998.82 ppm

Now the concentration of suspended solids is.  

Css = 0.001 × 10³ mg / 0.85 L = 1.1764 mg per L or 1.1764 ppm

Answer:

Explanation:Because of the delocalised electrons exposed above and below the plane of the rest of the molecule, benzene is obviously going to be highly attractive to electrophiles - species which seek after electron rich areas in other molecules.

Answer:

Benzene has a pi electron system that is electron rich.

Electrophiles are molecules that are attracted to electron rich molecules as they are electron deficient in order to form a more stable complex.

Hence, as benzene is electron rich, electrophiles will be attracted to it.

Answer:

P₂ = 3.24atm

Explanation:

Answer:

Its called bad cholesterol because a high LDL level leads to  buildup of cholesterol in your arteries.

Explanation:

Answer:

1.3223 acres

Explanation:

a football field's area is 360 feet (120 yards) x 160 feet (53.333 yards) = 57,600 sq. feet

if the area of an acre is 43,560 sq. feet, then a football field in acres = 57,600 sq. feet / 43,560 sq. feet = 1.3223 acres

we can verify our answer by doing the same calculation in sq. yards:

football field = 120 yards x 53.33 yards = 6,400 sq. yards

an acre is 4,840 sq. yards

football field in acres = 6,400 sq. yards / 4,840 sq. yards = 1.3223 acres

The area of the field is 1.3223 acres

From the question given above, the following data were obtained:

Dimension = 120 yard × 53.333 yard

The area of the field can be obtained as follow:

Area = Dimension

Area = 120 yard × 53.333 yard

Finally, we shall convert 6399.96 yard² to acre. This can be obtained as follow:

4840 yard² = 1 acre

Therefore,

6399.96 yard² = 6399.96 / 4840

Thus, the area of the field is 1.3223 acres

Learn more: https://brainly.com/question/1406215

Answer:

9.36g of H2O.

Explanation:

We'll begin by writing the balanced equation for the reaction.

2Na + 2H2O —> 2NaOH + H2

Next, we shall determine the mass of Na and H2O that reacted from the balanced equation.

This is illustrated below:

Molar mass of Na = 23g/mol

Mass of Na from the balanced equation = 2 x 23 = 46g

Molar mass of H2O = (2x1) + 16 = 18g/mol

Mass of H2O from the balanced equation = 2 x 18 = 36g

From the balanced equation above,

46g of Na reacted with 36g of H2O.

Now, we can determine the mass of H2O involved in reaction as follow:

From the balanced equation above,

46g of Na reacted with 36g of H2O.

Therefore, 11.96g of Na will react with = (11.96 x 36)/46 = 9.36g of H2O.

Therefore, 9.36g of H2O were used for the reaction.

Answer:

c

Explanation:

1 [tex]cm^{3}[/tex] = 1 mL

20,6 mL = 20,6 [tex]cm^{3}[/tex]

Answer:

C-20.6 cm^3

Explanation:

Cubic centimeters directly correspond to mL. Thus the answer would be the same as the mL

Answer:

20.25 mL.

Explanation:

The volume of base required for the titration can be derived by removing the base titrant volume from the volume at endpoint.

i.e Final volume - initial volume

= (22.08 - 1.83)mL

= 20.25 mL.

(Repeat and average volume results for accuracy.)

Answer:

[Cl⁻] = 0.016M

Explanation:

First of all, we determine the reaction:

Pb(NO₃)₂ (aq) + MgCl₂ (aq) → PbCl₂ (s) ↓  +  Mg(NO₃)₂(aq)

This is a solubility equilibrium, where you have a precipitate formed, lead(II) chloride. This salt can be dissociated as:

           PbCl₂(s)  ⇄  Pb²⁺ (aq)  +  2Cl⁻ (aq)     Kps

Initial        x

React       s

Eq          x - s              s                  2s

As this is an equilibrium, the Kps works as the constant (Solubility product):

Kps = s . (2s)²

Kps = 4s³ = 1.7ₓ10⁻⁵

4s³ = 1.7ₓ10⁻⁵

s =  ∛(1.7ₓ10⁻⁵ . 1/4)

s = 0.016 M

The element fluorine is more electronegative than the element chlorine. Fluorine has an electronegativity value of 4.0 and Carbon has an electronegativity value of 2.5.

The term electronegativity is defined as a chemical property that describes the capacity of an atom or a functional group to attract electrons toward itself.

Electronegativity is refer to the ability of an atom to attract shared electrons in a covalent bond. The grater the value of the electronegativity, the more strongly that element attracts the shared electrons.

In fluorine electronegativity value is more than carbon. Therefore, it strongly attracts the shared electrons.

Thus, The element fluorine is more electronegative than the element chlorine.

To learn more about an electronegativity, follow the link;

https://brainly.com/question/17762711

#SPJ2

Answer:

A

Explanation:

Lanthanides share the following common properties: Silvery-white metals that tarnish when exposed to air, forming their oxides. Relatively soft metals. Hardness increases somewhat with higher atomic number.

Answer:

APEX

Explanation:

A

Explanation:

First off, it's important to know that the three subatomic particles we have are the proton, neutron and electron.

have a relative charge of +1 : This is the proton. It is the postive subatomic particle present in an atom.

have a relative charge of -1 : This is the electron. It is the negative subatomic particle present in an atom.

have no charge : This is the neutron. It is the neutral subatomic particle present in an atom.

located in the nucleus of an atom : Twoo subatomic particles are located in the nucleus, the neutron and proton.

have a much lower mass than the other two types of particles: This is the electron. The proton and neutron are almost similar in mass. The electron is abut 1 / 1840 times the mass of the proton.

Answer:

See attached picture.

Explanation:

Hello,

In this case, given the compounds we notice:

a. Since carbon has four valence electrons (group IVA), it has three hydrogen atoms around it as well as a fluorine atom which has seven valence electrons (group VIIA). Moreover, we notice both carbon and fluorine attaining the octet.

b. In this case, two nitrogen atoms which have five valence electrons each (groupVA) are bonded via a single bond and two hydrogen atoms are bonded to each nitrogen atom in order to attain the octet for nitrogen only.

Thus, structures are given on the attached picture.

Regards.

Lewis structure for each covalent molecule CH₃F and N₂H₄ are attached to the image below.

a. CH₃F:

Carbon (C) has 4 valence electrons, Hydrogen (H) has 1 valence electron, and Fluorine (F) has 7 valence electrons.

The total number of valence electrons in CH3F can be calculated as follows:

1 carbon atom (C) × 4 valence electrons = 4 valence electrons

3 hydrogen atoms (H) × 1 valence electron = 3 valence electrons

1 fluorine atom (F) × 7 valence electrons = 7 valence electrons

Total valence electrons = 4 + 3 + 7 = 14

b. N₂H₄:

Nitrogen (N) has 5 valence electrons, and Hydrogen (H) has 1 valence electron.

The total number of valence electrons in N2H4 can be calculated as follows:

2 nitrogen atoms (N) × 5 valence electrons = 10 valence electrons

4 hydrogen atoms (H) × 1 valence electron = 4 valence electrons

Total valence electrons = 10 + 4 = 14

To learn more about the Lewis structure, follow the link:

https://brainly.com/question/29603042

#SPJ6

Answer:

Erosion.

Explanation:

Erosion is the act of loose soil crumbling under itself and causes it to slide down a hill.

Answer:

erosion

Explanation:

Answer:

6.24 x 10-3 M

Explanation:

Hello,

In this case, for the given dissociation, we have the following equilibrium expression in terms of the law of mass action:

[tex]Ka=\frac{[H_3O^+][BrO^-]}{[HBrO]}[/tex]

Of course, water is excluded as it is liquid and the concentration of aqueous species should be considered only. In such a way, in terms of the change [tex]x[/tex], we rewrite the expression considering an ICE table and the initial concentration of HBrO that is 0.749 M:

[tex]5.2x10^{-5}=\frac{x*x}{0.749-x}[/tex]

Thus, we obtain a quadratic equation whose solution is:

[tex]x_1=-0.00627M\\x_2=0.00624M[/tex]

Clearly, the solution is 0.00624 M as no negative concentrations are allowed, so the concentration of BrO⁻ is 6.24 x 10-3 M.

Best regards.

Answer:

6.24×10¯³ M

Explanation:

Step 1:

The equation for the reaction is given below:

HBrO (aq) + H2O (l) ⇋ H3O+ (aq) + BrO- (aq)

Step 2:

The following data were obtained from the question:

Equilibrium constant, Kc = 5.2x10^-5

Concentration of HBrO, [HBrO] = 0.749 M

Concentration of BrO-, [BrO-] =?

Step 3:

Determination of the concentration of

BrO-.

We can obtain the concentration of BrO- as follow:

Initial concentration:

[HBrO] = 0.749 M

[H3O+] = 0

[BrO-] = 0

During reaction:

[HBrO] = - y

[H3O+] = +y

[BrO-] = +y

After reaction:

[HBrO] = 0.749 - y

[H3O+] = y

[BrO-] = y

Applying the equation constant equation:

Kc = [H3O+] [BrO-] / [HBrO]

5.2x10^-5 = y × y / 0.749

5.2x10^-5 = y² / 0.749

Cross multiply

y² = 5.2x10^-5 x 0.749

Take the square root of both side

y = √(5.2x10^-5 x 0.749)

y = 6.24×10¯³ M

[BrO-] = y = 6.24×10¯³ M

Therefore, the the concentration of BrO- at equilibrium is 6.24×10¯³ M

Answer:

Second law of thermodynamics.

Explanation:

Second law of thermodynamics states the entropy or order in an isolated system always increases. The isolated system evolve spontaneously toward thermal thermal equilibrium.

For example if a room is untidy and dirty,it will become messy over time and disorder. So when the room is cleaned, there won't be disorderliness and entropy will decrease.

Answer:

Number of Significant Figures: 5

The Significant Figures are 1 1 0 0 5

Explanation:

Answer:

I think first one has net charge 4+

second one has earlier 3+ charge after gaining net charge becomes zero

I think this is correct

Explanation:

if wrong means pls correct me bro

An atom has 22 protons and 19 electrons. The net charge on the atom is now elementary, 1e+. If the same atom with 22 electrons and 19 electrons were to gain 3 electrons, the net charge on the atom would be, negative, -3.

Electrons are the positively charged particles that revolve around the negatively charged nucleus. Electrons revolve around the nucleus, and protons and neutrons are also present.

When the electrons gain electron they acquire negative charge and when they donate electrons it acquires positive charge.

It gains 3 electrons that why -3 charge.

Thus, the correct elementary charge, negative, -3.

Learn more about electrons

https://brainly.com/question/1255220

#SPJ2

Answer: b. -100 kJ

Explanation:

Heat of reaction is the energy released or absorbed during the course of the reaction. It is represented by the symbol [tex]\Delta H[/tex].

[tex]\Delta H=H_{products}-H_{reactants}[/tex]

[tex]\Delta H[/tex] = enthalpy of reaction = ?

[tex]H_{products}[/tex] = enthalpy of products = 0 kJ

[tex]H_{reactants}[/tex] = enthalpy of reactants = 100 kJ

[tex]\Delta H=0kJ-100kJ[/tex]

[tex]\Delta H=-100kJ[/tex]

Thus the ΔH for the reaction is -100kJ

Answer:

The molecular solids would have the lowest boiling point because of WEAK INTERMOLECULAR FORCES.

Explanation:

Answer: One with induced dipole attractions

Answer:

Explanation:

If we look at the structure of 1-Bromopropane; we will see that it is a derivative of alkane family by the the substitution of an alkyl group. The position of the Bromine in the propane is 1, making 1-Bromopropane  a primary alkyl-halide.

Primary alkyl - halide undergo SN2 mechanism. This nucleophilic reaction needs to be a strong alkyl halide , such as 1-Bromopropane used  otherwise it will result to a reactive mechanism if a weak electrophile is used.

However, the critical and the main objective here is to Draw the major substitution product if the reaction proceeds in good yield. If no reaction is expected or yields will be poor, draw the starting material in the box. If a charged product is formed, be sure to draw the counterion.

The attached diagrams portraying this notions is shown in the attached file below.

Answer:

80 ml.

Explanation:

The balanced equation is:

KOH + HNO3 ---->  KNO3 + H2O

So 1 mole of KOH reacts with 1 mole of HNO3

200ml of 0.16M KOH contains 0.16 * 200/1000

= 0.16 * 0.2

= 0.032 M KOH.

So we need the volume (V) of 0.4 M HNO3 which contains 0.032 moles.

0.4 * V = 0.032

V = 0.032 / 0.4

V = 0.08 liters

= 80 mls.

Answer:

The correct answer is -0.129 kJ

Explanation:

In the given case, the cooling of the balloon is done by withdrawing 0.784 J of heat, and the work done by the atmosphere on the balloon is 655 J. First, there is a need to transform kJ into J, 1 kJ = 1000 J. So, 0.784 kJ would be 784 J.  

The ΔE or the change in the internal energy can be calculated by using the formula, ΔE = q + w ----- (1).  

In the given case, q refers to the heat moved out of the system, that is, the value of q would be less than 0 or will be a negative quantity. Therefore, the heat moved out of the system will be -784 J. On the other hand, as the work or w is done on the system, therefore, the value of w would be more than 0 or will be a positive quantity. Thus, the value of w will be +655 J.  

Now putting the values in the equation (1) we get,  

ΔE = -784 J + 655 J

ΔE = -129 J or -0.129 kJ

As the change in internal energy comes out to be a negative value, therefore, the process is considered exothermic.  

Answer:

False; An oxidation-reduction is any chemical process that involves any chemical process in which elements undergo changes in oxidation number. hope that helps love!

Answer:

0.0289 kg of CO2 will be formed

Explanation:

Step 1: Data given

Mass of iron produced = 24.42 grams

Atomic mass iron = 55.845 g/mol

Molar mass CO2 = 44.01 g/mol

Step 2: The balanced equation

Fe2O3 + 3CO → 2Fe + 3CO2

Step 3: Calculate moles iron

Moles iron = mass iron / molar mass iron

Moles iron = 24.42 grams / 55.845 g/mol

Moles iron = 0.437 moles

Step 4: Calculate moles CO2

For 1 mol Fe2O3 we need 3 moles CO to produce 2 moles Fe and 3 moles CO2

For 0.437 moles Fe we'll have 3/2 * 0.437 = 0.6555 moles CO2

Step 5: Calculate mass CO2

Mass CO2 = moles CO2 * molar mass CO2

Mass CO2 = 0.6555 moles * 44.01 g/mol

Mass CO2 = 28.85 grams = 0.0289 kg

0.0289 kg of CO2 will be formed

Answer:

its 5 got it right

Answer:

CF₂O

Explanation:

To determine how the molecule will be made think about the valence number of each element in molecule:

 F= -1 , O= -2 , C= +4

because the C is positive atom it  will be the central atom with a double bond to the O and a single bond to each F.

this way all atoms completed the octet and stability

Answer:

Explanation:

Hello,

We are required to write the chemical formula of the following compounds

1. Calcium nitride = Ca₃N₂

2. Magnesium Phosphide = Mg₃P₂

3. Rubidium Chromate = Rb₂CrO₄

4. Aluminium nitrate = Al(NO₃)₃

5. Ammonium Arsenide = (NH₄)₃As

6. Nickel(ii) nitrite = Ni(NO₂)₂

7. Copper(i)sulfate = Cu₂SO₄

8. Iron(iii)nitrate = Fe(NO₃)₃

9. Manganese(ii)nitrate = Mn(NO₃)₂

The left hand side are the common names when the right hand side are the chemical formula.