The box is pushed to the right with a force of 40 Newtons and it just begins to move what is the maximum static frictional force

Answers

Answer 1

Answer:

The maximum static frictional force is 40N.

Explanation:

When an object of mass M is on a surface with a coefficient of static friction μ, there is a minimum force that you need to apply to the object in order to "break" the coefficient of static friction and be able to move the object (Called the threshold of motion, once the object is moving we have a coefficient of kinetic friction, which is smaller than the one for static friction).

This coefficient defines the maximum static friction force that we can have.

So if we apply a small force and we start to increase it, the static frictional force will be equal to our force until it reaches its maximum, and then we can move the object and now we will have frictional force.

In this case, we know that we apply a force of 40N and the object just starts to move.

Then we can assume that we are just at the point of transition between static frictional force and kinetic frictional force (the threshold of motion), thus, 40 N is the maximum of the static frictional force.


Related Questions

The diagram below shows a 1.0 x 105newton truck at rest on a hill that makes an angle of 8.0° with the
horizontal. What is the component of the truck's weight parallel to the hill? (hint: the weight was already
calculated, also you can use the work area to help you solve this.]

Answers

Answer:

[tex]it \: is \: mg \sin(8.0 \degree) \\ = 1.0 \times 10 {}^{5} \times \sin(8.0 \degree) \\ = 9.9 \times 10 {}^{4} newtons[/tex]

The component of the truck's weight parallel to the hill is 13,917.31 N.

The given parameters:

Weight of the truck, W = 1.0 x 10⁵ NInclination of the hill, θ = 8⁰

The component of the truck's weight parallel to the hill is calculated as follows;

[tex]W_x = mg \times sin(\theta)\\\\W_x = W \times sin(\theta)\\\\W_x = 1\times 10^5 \times sin(8)\\\\W_x = 13,917.31 \ N[/tex]

Thus, the component of the truck's weight parallel to the hill is 13,917.31 N.

Learn more about parallel forces here: https://brainly.com/question/9719731

The codons ___, ___ and ___ are the stop codons that signal the termination of translation.
ACA
UGG
UAA
UGA
UCC
UAG

Answers

Answer:

uaa,uag,uga

Explanation:

Need an actual answer, no links.

Answers

Answer:

8.70 s

Explanation:

Given (in the y direction):

v₀ = 2.38 m/s

v = 0 m/s

a = 0.310 sin (-62.0°) m/s²

Find: t

v = at + v₀

0 m/s = (0.310 sin (-62.0°) m/s²) t + (2.38 m/s)

t = 8.70 s

How does the Coriolis effect influence the direction of the Trade Winds in the Northern Hemisphere? Does it have the same effect in the Southern Hemisphere?

Answers

Answer:

Part A

Coriolis effect is used to describe how objects which are not fixed to the ground are deflected as they travel over long distances due to the rotation of the Earth relative to the 'linear' motion of the objects

Due to the Coriolis effect the wind flowing towards the Equator from high pressure belts in the subtropical regions in both the Northern and Southern Hemispheres are deflected towards the western direction because the Earth rotates on its axis towards the east

Part B

In the Northern Hemispheres, the winds are known as northeasterly trade winds and in the Southern Hemisphere, they are known as the southeasterly trade wind. Therefore, Coriolis effect has the same effect on the direction of the Trade Winds in the Southern Hemisphere as it does in the Northern Hemisphere

Explanation:

Singly charged uranium-238 ions are accelerated through a potential difference of 2.20 kV and enter a uniform magnetic field of 1.90 T directed perpendicular to their velocities. Determine the radius of their circular path.

Answers

Answer:

r = 0.0548 m

Explanation:

Given that,

Singly charged uranium-238 ions are accelerated through a potential difference of 2.20 kV and enter a uniform magnetic field of 1.90 T directed perpendicular to their velocities.

We need to find the radius of their circular path. The formula for the radius of path is given by :

[tex]r=\dfrac{1}{B}\sqrt{\dfrac{2mV}{q}}[/tex]

m is mass of Singly charged uranium-238 ion, [tex]m=3.95\times 10^{-25}\ kg[/tex]

q is charge

So,

[tex]r=\dfrac{1}{1.9}\times \sqrt{\dfrac{2\times 3.95\times 10^{-25}\times 2.2\times 10^3}{1.6\times 10^{-19}}}\\\\r=0.0548\ m[/tex]

So, the radius of their circular path is equal to 0.0548 m.

In a chemical reaction, an iron atom becomes the ion Fr2+ . What happened to the ion atom

Answers

Answer:

In a chemical reaction, an iron atom became the ion which means that iron atom by loosing two electrons from its valence shell has oxidized into positively charged ion

Explanation:

A ball of mass 0.5 kg is swinging at a small angle from a light string of length 0.25 m. What is the period of this pendulum? Round answer to two significant digits.​

Answers

Answer: 1.0

Explanation:

not sure why but that is the correct answer

Answer:

1.0

Explanation:

Correct answer on Khan Academy

What 2 materials are the planets in our solar system made of?

Please answer this quickly please please please please please please please

Answers

they are made up of rock and gas

Answer:

Hydrogen and Helium. 75% Hydrogen and 25% Helium.

Explanation:

An air craft heads. north at 400 km/hrs relative to the wind the air craft velocity is 300 km/hrs due north .find the velocity of the wind to the ground.​

Answers

Answer:

325

Explanation

seio na:

how does 3rd class lever make our work easier

Answers

In a third class lever, the effort is located between the load and the fulcrum. If the fulcrum is closer to the load, then less effort is needed to move the load. If the fulcrum is closer to the effort, then the load will move a greater distance. ... These levers are useful for making precise movements.

Answer:

the third class lever makes our work easier as effort is located at the middle, load at first and fore is applied at the buttom. which helps in accelerating work.

hope it is helpful to you

Electric field shows the strength and what of an electric field

Answers

Answer:

a region in which particles with an electric charge will experience a force

Explanation:

let me know if its wrong . sorry if it is

The person above is right !

Can an object have both kinetic energy and gravitational potential energy? Explain.

Answers

Answer:

Yes

Explanation:

An object can be moving (have kinetic energy) and be elevated above the ground at the same time (and also have potential energy).

Yes an object can be moving have kinetic energy and be elevated above the ground at the same time and also have potential energy.

What is energy?

Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.

The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it. We must put in effort in order to apply a force. Following work, energy is transmitted to the item, which causes it to move at a new, constant speed. An object can store energy as the result of its position is potential energy.

An object can be moving have kinetic energy and be elevated above the ground at the same time and also have potential energy.

To learn more about energy refer to the link:

brainly.com/question/1932868

 #SPJ2

Magnetic field lines are more concentrated at the poles of the magnet
True
False

Answers

Answer:

True! UwU

Explanation:

the magnetic field is strongest near to the poles of the magnet were the lines of flux are more closely spaced.

Which statement describes a digital signal used to store information?
A. It includes sound waves you make.
B. It moves gradually among an infinite number of values.
C. It includes visible light waves.
D. It is easy to copy.
SUBMIT
Help

Answers

Answer:

D. It is easy to copy.

Explanation:

It is not B, or A, nor C.

Answer:D

Explanation:

List 3 main types weathering​

Answers

Answer:

3 types of weathering are, physical, chemical and biological weathering.

Explanation:

Hope this helps and have a wonderful day!!!

A spring oscillates with a period of
0.228 S. What is its frequency?
(Unit = Hz)

Answers

Answer:4.39

Explanation:For acellus students the answer is 4.39

Identify the medium for the following waves:
ripples

The sound waves from a radio speakers

Seismic waves

Answers

Answer:

The sound waves from a radio speakers

Explanation:

Which of the following is/are true of a vector? Check all that apply.
1. Velocity is a vector quantity.
2. Distance is a vector quantity.
3. The magnitude of a vector cannot be zero unless all of its components are zero.
4. A vector can have positive or negative magnitudes.
5. Vectors indicate quantity and direction.

Answers

Answer:

3

Explanation:

when a human cannon ball shoots in the air for 9 seconds, she travels 37 meters before ut lands. Caculate the speed​

Answers

Answer:

9.1 mph

Explanation:

What is the genotypes for HH or hh called?

Answers

HH- dominant
hh- recessive
HH- dominant
hh- recessive

Emma is making jelly. In order to make it dissolve quickly, should Emma put the block of jelly in whole, or
break it into cubes? Explain your answer.
[2 marks]

Answers

Answer:

Break it into cubes. When you make the thing that is dissolving smaller, the surface area of the thing dissolving it is larger, making the jelly more exposed.

What happens when waves slow down and change direction?

Answers

Answer:

Refraction

Explanation:

Refraction is the change in direction of a wave as it slows down. ... Tsunamis also refract around land masses

PLEASE NO FILES. Ill give brainliest! 1. Which item below describes a quick change to
Earth's landscape?
A. a stone becoming smooth
B. dirt moving down a steep hill
C. flat land becoming a canyon
D. a glacier flattening the land below it​

Answers

Answer:

B i think

Explanation:

plz let me know if wrong

Answer:

Yes it is B

Can you please mark Brainliest

Which statement describes a difference between insulators and conductors?(1 point)

Insulators have high conductivity, while conductors have low conductivity.

Insulators can transmit electric current, while conductors cannot.

Insulators are made of metallic materials, while conductors are not.

Insulators have high resistance, while conductors have low resistance.

Answers

Answer:

The "Insulators have high resistance, while conducters have low resistance".

The difference between insulators and conductors is insulators have high resistance, while conductors have low resistance.

What is insulator?

An insulator is a material that does not allow easy passage of electric current through it. In other words, these materials have high resistance to the flow of current.

What is conductor?

A conductor is a material that allows easy passage of electric current through it. In other words, these materials have low resistance to the flow of current.

Thus, the difference between insulators and conductors is insulators have high resistance, while conductors have low resistance.

Learn more about Insulator here: https://brainly.com/question/1472743

in which of the following does enstein's famous equation apply?

A. a driver brings a car to a halt
B. collisions between objects
C. water falling in a waterfall
D. nuclear fission and fusion reaction

Answers

Answer:

D

Explanation:

Please help!! I will give brainliest!

Q: Is the direction important when calculating speed? Explain.

Answers

Answer:

Depends.

Explanation:

Whether the object is going left or right, the speed will stay the same until friction eventually stops it. However, if, for example, we're talking about an object going straight before veering right, then yes, speed does matter. An object will normally have to speed up or slow down momentarily when changing direction to keep itself sustained on the ground.

So, honestly? It really depends on what we're talking about!

Hope this helped!

Source(s) used: None.

Please help Best answer gets BRAINLIEST


A skier waits at the top of a 11.7m hill. He then skis down the slope at an angle of 27 degrees above horizontal. What will his velocity be at the bottom of the hill? Show work

Answers

Answer:

v = 3.89 m / s

Explanation:

For this exercise let's use the concept of conservation of mechanical energy

starting point. In the highest part of the mountain

         Em₀ = U = m g h

final point. In the lower part

         Em_f = K = ½ m v²

how energy is conserved

         Em₀ = Em_f

         mgh = ½ m v²

         v = [tex]\sqrt{ 2gh}[/tex]

let's use trigonometry to find the height

         sin θ = h / L

          h = L sin θ

we substitute

          v = [tex]\sqrt{ 2g L \ sin tea}[/tex]

let's calculate

          v = [tex]\sqrt{2 \ 9.8 \ 1.7 \ sin 27}[/tex]

          v = 3.89 m / s

3. Conduction will occur between objects at different temperatures that are
A separated, but not in contact with each other
B in contact with each or separated
C in contact with each other, but not separated

Answers

The answer is C
Hope this helps.
C. the particles/objects have to be touching for the thermal energy to be transferred from one object to another

Research shows that continents move at an average rate of 2.3 cm per
year. Which two theories could be supported by this evidence?

Raisin theory
Expanding Earth theory
Contracting Earth theory
Theory of continental drift
SUBMIT

Answers

theory of continetal drift sumbit

The vertical columns on the periodic table of elements are called groups.
A True
B. False

Answers

Answer:

True

Explanation:

Other Questions
Identify the correct sentence.O A. Thursday is Lisa's birthday we'll take her out to dinner.OC. Thursday is Lisa's birthday, we'll take her out to dinner.OB, Thursday is Lisa's birthday and we'll take her out to dinnerOD. Thursday is Lisa's birthday, we'll take her out to dinner. how are plants healthy Can somebody please help how many neurons are in phosphorous What is the area of the parallelogram? how have white segregationist women worked to maintainsegregation? WILL MARK BRAINIEST!!NO LINKS!! Which of the follow can NOT be possibleerror that occurs during a lab experiment?human errorO pure reactants were usedunexpected products were producedthe reaction didn't go to completion What two numbers have a product of -72 and a sum of 1? pls help with this !! The speed of sound (shockwave) in an explosion is 100mph. How many seconds does the shockwave reach 2km away? __________are costs incurred as a result of unsatisfactory quality that is found before the delivery of a good or service to the customer. a. Internal failure costs b. Appraisal costs c. Prevention costs d. External failure costs b r a i n l i s t to the first person to answer A rectangle has an area of 1,280.64 square miles and a base of 36.8 miles. What is the height? The square below represents one whole.What percent is represented by the shaded area?% Geometry - Law of Sines question #17. Please help, I am stuck. What did the Plessy vs Ferguson decision make legal? We can see stars like the Sun because they If you bought a lunch for $4.60 and the tax rate was 6%,How much is the total owed? URGENT HELP NEEDED ASAPPHOTO ATTACHEDCALCULUS Work out the point of intersection of the lines2x + 3y = 11 and 2y = 13 3x You are considering two different methods for constructing a new warehouse site. The first method would use prefabricated building segments, would have an initial cost of $6.5 million, would have annual maintenance costs of $150,000, and would last for 25 years. The second alternative would employ a new carbon-fibre panel technology, would have an initial cost of $8.2 million, would have maintenance costs of $650,000 every ten years, and is expected to last 40 years. Both buildings would be in CCA Class 1 (at a rate of 4 percent) and it is expected that each would have a salvage value equivalent to 25 percent of its construction cost at the end of its useful life. The discount rate the firm uses in evaluating projects is 11 percent. The tax rate is 35 percent. What is the annual cost for each option? (Enter the answers in dollars. Do not round your intermediate calculations. Round the final answers to 2 decimal places. Negative answers should be indicated by a minus sign.)