It just so happens that regardless of the material, when objects are heated up they will start to glow and change colors at near identical temperatures. The plot that you see is called a blackbody spectrum. This plot tells us the intensity or the “amount” of light that an object will emit at different wavelengths (or “colors”). The visible wavelengths are marked by their colors on the plot. To the right of the visible band is lower energy infrared light. To the left of this band is higher energy ultraviolet (UV) light.
Click the + button that is to the left of the intensity scale (far left side of the screen) such that the top of the scale is at 1x10-3 (in the picture above, the top of the scale says 100).
Now use the temperature slider to the right, and take the temperature all the way down to 300 Kelvin (80 Fahrenheit).
Now slowly begin to raise the temperature. At approximately what temperature would a heated material (metal, wood, etc.) begin to give off visible light at a deep red color?

Answer:

r = 2.0m

when t = 0, the angular displacement is zero.

Explanation:

When the angular acceleration is 0.01 m/s2, you can calculate

angular acceleration = change in angular velocity/ time

D.

The gravitational of a body is possessed by the body due to the virtue of its position.

The formula for gravitational potential energy is,

                                P.E = mgh joules

Substituting the values

196*9.8*250= 49k

Answer:

B. Outside the nucleus.

Explanation:

Electrons orbit the nucleus of the atom.

The flux of [tex]\vec E = -x\,\vec\imath + y\,\vec\jmath[/tex] is given by the surface integral

[tex]\displaystyle \iint_S \vec E \cdot d\vec\sigma[/tex]

where [tex]S[/tex] is the given square region, which we can parameterize by

[tex]\vec s(x, z) = x\,\vec\imath + z\,\vec k[/tex]

with [tex]0\le x\le 1[/tex] and [tex]0\le z\le 1[/tex]. The area element is

[tex]d\vec\sigma = \vec n \, dx\,dz[/tex]

where [tex]\vec n[/tex] is the normal vector to [tex]S[/tex]. Depending on the orientation of [tex]S[/tex], this vector could be

[tex]\vec n = \dfrac{\partial\vec s}{\partial x} \times \dfrac{\partial\vec s}{\partial z} = -\vec\jmath[/tex]

or [tex]-\vec n = \vec \jmath[/tex]; either way, the integral reduces to

[tex]\displaystyle \iint_S \vec E \cdot d\,\vec\sigma = \int_0^1 \int_0^1 (-x\,\vec\imath + z\,\vec k) \cdot (\pm\vec\jmath) \, dx\,dz = \boxed{0}[/tex]

Jupiter is the largest. the closest Jovian planet to the sun is Jupiter and most farthest is  Neptune. moons of Jupiter are Europa, lo, Ganymede, etc. Saturn has an orbital period equal to 29 earth years. Uranus's rotational period is equal to 17h 14m.

In terms of size-

In terms of location-

Jovian planets are generally farther from the sun while terrestrial plants are closer to the sun. therefore Jupiter, Saturn, Uranus, and Neptune are away from the sun whole earth is closer to the sun.

In terms of moons-

Jovian planets have more moons as compared to earth. Jupiter has 53 moon, Uranus has 27 Miranda, ariel ,Oberon) while the earth has one moon.

In terms of the orbital period-

Jovian planets have a longer orbital period than earth as they are further from the sun.

In terms of the rotational period-

The rotational period of the Jovian planet is approximately 10 to 17 hours.

learn more about the Jovian planet here:

https://brainly.com/question/14450796

#SPJ10

Answer:

See below

Explanation:

The work done equals the increase in Potential Energy

PE = mgh

    = 150 * 9.81 * 1 = 1471.5 j

3 sets of 10 is 30 times this = 44145 j

The amount of work done by a football player in the weight room when he squats 150 kg will be equal to 1471.5 J.

Potential energy is a form of stored energy that is dependent on the relationship among different components. When a spring is compressed or stretched, its potential energy increases. If a steel ball is raised above the floor as opposed to falling to the ground, it has more potential energy. It is capable of carrying out additional work when raised.

Potential energy is a feature of systems rather than of particular bodies or particles; for instance, the system created up of Earth and the elevated ball has more energy stored as they become further apart.

Potential energy develops in systems components whose configurations, or spatial arrangement, determine the amount of the forces they apply to one another.

As per the instructions given in the question,

Work performed is equivalent to Potential Energy Increase,

PE = mgh

= 150 × 9.81 × 1

PE = 1471.5 J

Also,

3 sets of 10 are 30 times this = 44145 J

To know more about Potential Energy:

https://brainly.com/question/24284560

#SPJ2

Answer:

Tolerate

Explanation:

Answer:

Following precautions for obtaining the refractive index of a triangular glass prism:-

Explanation:

(1) All the faces of the prism should be neat and clean.

(2) Pins for holding the paper on the drawing board must be pinned perpendicular to the paper for better handling.

(3) While fixing the pins for checking the refractive index of the prism, make sure that the reflective images of the pins should be aligned to your eye to avoid any type of parallax error.

(4) Pins should not be removed or pinned again during the experiment.

(5) Avoid mishandling of the prism.

(6) Same edge of the prism should be taken as vertex for observations.

(7) For drawing the boundary of the prism, a sharp pencil should be used.

(8) Soft board and pointed pins should be used.

(9) The distance between the pins should be 5 cm or more.

(10) Make sure the glass slab or prism taken are polished and not broken.

Hope this helps!

Please mark me as brainlist.

Answer:

Let distance between two cities is x km . So total distance travelled bus x+x=2x km and time taken was=(x/40)+(x/60)=(3x+2x)/120=5x/120=x/24 hrs . So avg speed is 2x/(x/24)=48 km per hr.

or

dt1=60km1h

dt2=30km1h

2dt1+t2=r¯

d=60t1

d=30t2

60t1=30t2

2t1=t2

2dt1+(2t1)=r¯

2(60t1)t1+2t1=r¯

2(60t1)=r¯(t1+2t1)

120=r¯+2r¯

r¯=1203

r¯=40km/h

The internal energy of the gas after the adiabatic compression will be 30.398 × 10⁶ J

When energy is moved from one store to another, work is completed. Work done on the gas is taken as -ve.

Given data;

pressure(P)=3.0 atm = 303975 N/m²

The initial volume, V₁

work is done on the gas., W=?(-ve)

Change in heat, ΔQ=0

Change in the internal energy of the gas., ΔE

The work done on the gas;

W = -PΔV

W= - 303975 N/m² × 100 cm³

W = - 30.3 × 10⁶ J

The internal energy is found as;

ΔE=q+w

ΔE= 0-30.3 × 10⁶ J

ΔE= -30.3 × 10⁶ J

E₂-E₁= -30.3 × 10⁶ J

E₂ = -30.3  × 10⁶ J +500

E₂ = 30.398 × 10⁶ J

Hence, the internal energy of the gas after the adiabatic compression will be 30.398 × 10⁶ J

To learn more about the work done by gas refer to;

https://brainly.com/question/12539457

#SPJ1

The minimum speed v which will permit the projectile to reach station Beta is √ [Gm/3d]

If an object is lifted, work is done against gravitational force. The object gains energy.

Given are space stations Alpha and Beta located on the line between the planets. Both space stations are at rest with respect to the planets. Alpha is at distance d 4 from planet 1 and Beta is at distance d 3 from planet 2. A projectile of mass m is fired from station Alpha, with its velocity v pointing directly at planet 2.

The range of the projectile is given by R =  v²sin2θ / g

g = gravitational acceleration of Earth

If g = g(p) for planet , range  R =  v²sin2θ / g(p)..................(1)

The gravitational force of attraction = weight force

Gm² /d² = m g(p)

g(p) = Gm/d².........................(2)

For R = d/3, from equation (1), we have

d/3 =  v²sin2θ / g(p)

Plug the expression for g(p) , we get

v = √ [Gm/3dsin2θ ]

For velocity to be minimum, sin2θ =1

So, the minimum velocity will be

v = √ [Gm/3d]

Thus, the minimum speed v which will permit the projectile to reach station Beta is √ [Gm/3d]

Learn more about gravitational potential energy

https://brainly.com/question/3884855

#SPJ1

Answer:

di

Explanation:

The prefix is di. CO2 is carbon dioxide. di means 2.

The x and the y coordinates of the center of the mass of this system will be 43.1 m and 3.12 m respectively.

A location is established in relation to an object or set of objects in the center of mass. It is the system's average position across all of its components.

Given data;

There are three little objects that are densely spaced out in the x-y plane.;

The value of the masses

m₁=1.41 kg

m₂=2.55 kg

m₃=3.19 kg

[tex]\rm X_{cm} =\frac{ (W_1x_1 + W_2x_2 + W_3x_3)}{(W_1 + W_2 + W_3)} \\\\\ X_{cm} ==\frac{1.41 \times 2 + 2.55 \times 6 +3.19 \times 4}{1.41+2.55+3.19} \\\\ X_{cm} =4.31 \ m[/tex]

[tex]\rm Y_{cm} =\frac{ (W_1y_1 + W_2y_2 + W_3y_3)}{(W_1 + W_2 + W_3)} \\\\\ X_{cm} ==\frac{1.41 \times 2 + 2.55 \times 4 +3.19 \times 7}{1.41+2.55+3.19} \\\\ X_{cm} =3.12 \ m[/tex]

Hence, the x and the y coordinates of the center of the mass of this system will be 4.31 m and 3.12 m respectively.

To learn more about the center of mass, refer;

https://brainly.com/question/8662931

#SPJ1

The voltage of the secondary will be 36 V.From the given conditions primary transformer has 3 times as many turns in the secondary coil.

Electromagnetic induction is what causes the induced voltage. Electromagnetic induction is the process of generating emf (induced voltage) by subjecting a conductor to a magnetic field.

In this case, a magnet is pushed in and out of a wire coil attached to a high-resistance voltmeter.

Typically, a transformer's primary winding is attached to the input voltage source and changes electrical power into a magnetic field.

The secondary winding's role is to turn this alternating magnetic field into electricity, generating the necessary output voltage.

Given data;

Primary coil voltage,[tex]\rm V_P = 12 \ v[/tex]

Secondary coil voltage,[tex]\rm V_s = ?[/tex]

No turns in the primary coil,[tex]\rm N_p[/tex]

No turns in the secondary coil,[tex]\rm N_s[/tex]

From the given condition;

[tex]\rm N_s = 3N_p[/tex]

For a transformer,

[tex]\rm \frac{V_p}{V_s}= \frac{N_p}{N_s} \\\\ \rm \frac{12}{V_s}= \frac{N_p.}{3N_p} \\\\ V_s = 36 \ V[/tex]

Hence the voltage of the secondary will be 36 V.

To learn more about the induced voltage refer to the link;

https://brainly.com/question/19482771

#SPJ1

Stimulating plant growth is not a use of nuclear chemistry in industry. Thus, the correct option is D.

Nuclear chemistry may be defined as the sub-branch of chemistry that involves the investigation of physical and chemical characteristics of elements that are affected by transformations in the configuration of the atomic nucleus.

Thickness gauges measure the thickness, density, and fill levels and are utilized in manufacturing to make sure that an entire product or a set of products are of identical thickness.

Tracers are utilized in tracing the actual composition of radioactive decay through the chemical compounds. While the leak detectors monitor the actual and constant flow of water through a given system precisely.

Therefore, the correct option for this question is D.

To learn more about Nuclear chemistry, refer to the link:

https://brainly.com/question/3992688

#SPJ1

Answer:

it is d

Explanation:

Answer:

Approximately [tex]53^{\circ}[/tex], assuming that the upper and lower surfaces of the glass on this boat are parallel.

Explanation:

Assume that the upper and lower surfaces of the glass at the bottom of this ship are parallel. Refer to the diagram attached. The two normals would also be parallel to each other.

The following angles would be alternate interior angles between the two normals:

Since the two normals are parallel to each other, these two angles would have the same value. Let [tex]\theta_{\text{glass}}[/tex] denote the value of both of these angles.

Let [tex]\theta_{\text{src}}[/tex] denotes the angle at which a beam of light leaves the original medium (angle of incidence.) Let [tex]\theta_{\text{dst}}[/tex] denote the angle at which this beam of light enters the new medium.

Let [tex]n_\text{src}[/tex] and [tex]n_\text{dst}[/tex] denote the refractive indices of the original and the new medium, respectively. By Snell's Law:

[tex]\begin{aligned}\frac{\sin(\theta_{\text{dst}})}{\sin(\theta_{\text{src}})} = \frac{n_{\text{src}}}{n_{\text{dst}}}\end{aligned}[/tex].

Let [tex]\theta_{\text{water}}[/tex] denote the angle at which the beam of light in this question leaves the water. Let [tex]\theta_{\text{air}}[/tex] denote the angle at which this beam of light enters the air. It is given that [tex]\theta_{\text{water}} = 37^{\circ}[/tex], while [tex]\theta_{\text{air}}[/tex] is the value that needs to be found.

Let [tex]n_{\text{air}}[/tex], [tex]n_{\text{water}}[/tex], and [tex]n_{\text{glass}}[/tex] denote the refractive index of air, water, and glass, respectively. By Snell's Law:

[tex]\begin{aligned}\frac{\sin(\theta_{\text{glass}})}{\sin(\theta_{\text{water}})} = \frac{n_{\text{water}}}{n_{\text{glass}}}\end{aligned}[/tex].

[tex]\begin{aligned}\frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{glass}})} = \frac{n_{\text{glass}}}{n_{\text{air}}}\end{aligned}[/tex].

Thus:

[tex]\begin{aligned} & \frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{water}})} \\ =\; & \frac{\sin(\theta_{\text{glass}})}{\sin(\theta_{\text{water}})}\times \frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{glass}})} \\ =\; & \frac{n_{\text{water}}}{n_{\text{glass}}}\times \frac{n_{\text{glass}}}{n_{\text{air}}} \\ =\; & \frac{n_{\text{water}}}{n_{\text{air}}}\end{aligned}[/tex].

Since [tex]\theta_{\text{water}} = 37^{\circ}[/tex]:

[tex]\begin{aligned} & \sin(\theta_{\text{air}})\\ =\; & \sin(\theta_{\text{water}}) \times \frac{\sin(\theta_{\text{air}})}{\sin(\theta_{\text{water}})} \\ =\; & \sin(\theta_{\text{water}})\times \frac{n_{\text{water}}}{n_{\text{air}}} \\ =\; & \sin(37^{\circ}) \times \frac{1.33}{1.0} \\ \approx \; & 0.800 \end{aligned}[/tex].

Therefore:

[tex]\begin{aligned}\theta_{\text{air}} &= \arcsin(\sin(\theta_{\text{air}})) \\ & \approx \arcsin(0.800) \\ &\approx 53^{\circ} \end{aligned}[/tex].

In other words, this beam of light would leave the glass at approximately [tex]53^{\cic}[/tex] from the normal.

Answer:

500 g

Explanation:

Specific heat of water = 1 j/g-c

Heat given up by hot water = 200(75-25)(1) = 10 000 j

this is the heat GAINED by the cold water

10000 j =  x ( 25 -5)(1)  

          x =500g

Explanation:

hi

please help me. ineed answers

Gerund/Infinitive

1. Put the verbs in brackets into the correct infinitive form or the -ing form.

1. Jane went on____(sleep) for another two hours.

2. He told us his name and went on____ (introduce) us to his wife.

3. She tried (finish) her homework, but it was too difficult.

4. You should try (eat) more fruit. It's good for your health.

5. He regrets (argue) with his best friend.

6.We regret (inform) you that tonight's performance will be cancelled.

7. Oh, no! I forgot____(lock) the front door.

8. I'll never forget_(meet) my favourite film star.

9.Claire likes (ski). She says it's very exciting.

10. I like__(go) to the dentist every six months.

11.I must remember (post) these letters today.

12. I remember__(read) the book, but I don't know who wrote it.

13. I'm sorry for___(forget) your birthday. It was awful of me.

14. I'm sorry.(say) that you have failed the exam.

15. She is afraid___(climb) the tree in case she falls.

16.Mary never wears her diamond ring. She is afraid of (lose) it.

17. I have stopped . (buy) some food before continuing our journey.

18. We stopped (watch) horror films because they give me nightmares

19. Tom stopped__(pick up) his washing on the way home.

20 If you don't stop. (smoke), you'll make yourself ill.

21.Will you quit___(complain)! It doesn't help.___(solve) the problem.

22.If you ever decide___(sell) your car, let me____(know).

23.I would like you.__(water) the plants for me at the weekend.

24.I clearly remember__(set) my alarm clock before__(go) to bed last night.

25. These plants require(water) every day.

26. I resent you (speak) to me like that! Have some respect.

27. It would be good for the children__ (play) outdoors more often.

28. I promised __(take) Jill to the party, but I don't feel like__(go) now.

29. Don't waste your time (look for) the document.Ask Mr Gale.

30. Please, excuse his__(leave) so early. He wants __(catch up) with his (study).

31. Try__(phone) John at the office if he's not at home.

32. I tried my best__(finish), but there just wasn't enough time.

33. He was promoted in 1990 and went on__(become) a company director.

34. The band went on__(play) even after the lights had gone out.

35. "Why is the baby crying?" "I think he wants (feed)."

36. Sharon wants__(talk) to you.

37. Jane was afraid__(show) her school report to her parents.

38. I'm afraid of__(lose) my way in the forest.

39. I regret__ (inform) you that your husband has been arrested.

Answer:

Explanation:

There are different ways to investigate the factors that affect resistance. In this practical activity, it is important to:record the length of the wire accuratelymeasure and observe the potential difference and currentuse appropriate apparatus and methods to measure current and potential difference to work out the resistance

Answer:

from my side the will be b only the mass of the planet thank you

Answer:

D

Explanation:

W=mg

g=GM/r²(G=Gravitational constant, M=mass of earth, r=Radius of earth)

>>W=m(GM/r²)

W is directly proportional to mass of earth and mass of your body

The crest is the highest point of a pebble-induced ripple in a body of water. Option a is correct.

The distance between two successive troughs or crests is known as the wavelength. The highest point of the wave is the crest, while the trough is the lowest.

The high point of the ripple seen in a pond after throwing in a pebble is the crest.

Hence option a is correct.

To learn more about the wavelength refer to the link;

https://brainly.com/question/7143261

#SPJ1

Answer:

0.4

Explanation:

ω = km

ω = 1000 x 4

ω = 4000 divide this by 10000 and you get 0.4s

Ocean bulges on Earth would be bigger if the Moon had twice as much mass and yet orbited the planet at the same distance. Option B is correct.

The fluid and moveable ocean water are drawn towards the moon by the gravitational attraction between the moon and the Earth.

The ocean nearest to the moon experiences a bulge as a result, and as the Earth rotates, the affected seas' locations shift.

The Moon's bulges in the oceans would be larger if it had twice the mass and orbited Earth at the same distance.

Hence option B is corect.

To learn more about the ocean bulge refer;

https://brainly.com/question/14373016

#SPJ1

(a) The average velocity of the particle in the time interval t₁=2sec and t₂=3sec is 10 m/s.

(b) The velocity and acceleration at any time t is v =  (2ati + bj) m/s and a = 2ai m/s²

(c)  The average acceleration in the time interval given in part (a)​ is 4 m/s².

x = at²i + btj

x = 2t²i + tj

Δv = Δx/Δt

x(2) = 2(2)²i + 2j

x(2) = 8i + 2j

|x(2)| = √(8² + 2²) = 8.246

x(3) =  2(3)²i + 3j

x(3) = 18i + 3j

|x(3)| = √(18² + 3²) = 18.248

Δv = (18.248 - 8.246)/(3 - 2)

Δv =  10 m/s

x = at²i + btj

v = dx/dt

v =  (2ati + bj) m/s

a = dv/dt

a = 2ai m/s²

a = 2ai m/s²

a = 2(2)(1)

a = 4 m/s²

Learn more about average acceleration here: brainly.com/question/104491

#SPJ1

Answer: stronger

Explanation: the poles magnetism is concentrated at the poles

A magnetic field is the strongest at one end of a bar magnet.

The region in which the force of magnetism acts around a magnetic material or a moving electric charge is known as the magnetic field.

Here,

A bar magnet can be considered as a dipole with a north pole at one end and south pole at the other.

A magnetic field can be measured leaving the dipole at the north pole and returning the magnet at the south pole. If a magnet is cut in two, two magnets or dipoles are created out of one.

The magnetic poles, the region at each end of a magnet where the external magnetic field is strongest. A bar magnet suspended in Earth's magnetic field orients itself in a north–south direction. The north-seeking pole of such a magnet, or any similar pole, is called a north magnetic pole.

Here,

A magnetic field is the strongest at one end of a bar magnet.

To learn more about magnetic field, click:

https://brainly.com/question/19542022

#SPJ2

The magnitude of the net force that the atmosphere applies to the roof when the outside pressure drops suddenly is  1.9 x 10⁵ N.

The pressure is the amount of force applied per unit area.

Pressure p = Force/Area

Given is a house has a roof (colored gray) with the dimensions shown in the drawing. The outside pressure drops suddenly by 13.2 mm of mercury, before the pressure in the attic can adjust.

The pressure difference ΔP = 13.2 mm of Hg

The length of the roof l = 14.5m

the breadth of the roof h = 4.21m

The force exerted by pressure is

Force, F = P x A

         = (13.2 mm of Hg) [(133 N/m²) /1 mm of Hg ](14.5 x 4.21)

         = 107,170.6 N

Then the net vertical force

    Fnet = 2F cos30

    Fnet = 2 ( 107,170.6) cos30

    Fnet = 185625 N

    Fnet =1.9 x 10⁵ N

The direction of the force is downwards, since the horizontal components of the forces cancel each other.

Hence,  magnitude of the net force is 1.9 x 10⁵ N

Learn more about pressure.

https://brainly.com/question/12971272

#SPJ1

The cost to use all lamps is $62.

           power=energy/time

          (60+ 100+150)=energy/2.5

          energy=775 joule

cost for 1 hour=$0.08

                      = 775 * 0.08

                     = $62

learn more about power here:

https://brainly.com/question/19955766

#SPJ10

Answer:

6.2 cents

Explanation:

(60+100+150/1000)*2.5*8=6.2 cents