Answer:
Explanation:
Wow, I said 'beets'..... I must be weird.
A certain spring has a spring constant k1 = 660 N/m as the spring is stretched from x = 0 to x1 = 35 cm. The spring constant then changes to k2 = 250 N/m as the spring is stretched to x2 = 65 cm. From x2 = 65 cm to x3 = 89 cm the spring force is constant at F3 = 105 N.
Write an equation for the work done in stretching the spring from x1 to x2.
Calculate the work done, in joules, in stretching the spring from x1 to x2.
Calculate the work, in joules, necessary to stretch the spring from x = 0 to x3.
(a) The equation for the work done in stretching the spring from x1 to x2 is ¹/₂K₂Δx².
(b) The work done, in stretching the spring from x1 to x2 is 11.25 J.
(c) The work, necessary to stretch the spring from x = 0 to x3 is 64.28 J.
Work done in the springThe work done in stretching the spring is calculated as follows;
W = ¹/₂kx²
W(1 to 2) = ¹/₂K₂Δx²
where;
k is spring constantΔx is compression of the springW(1 to 2) = ¹/₂(250)(0.65 - 0.35)²
W(1 to 2) = 11.25 J
W(0 to 3) = ¹/₂k₁x₁² + ¹/₂k₂x₂² + ¹/₂F₃x₃
where;
k₁ is first spring constantk₂ is second spring constantF₃ is third force applied to the springW(0 to 3) = ¹/₂(660)(0.35)² + ¹/₂(250)(0.65 - 0.35)² + ¹/₂(105)(0.89 - 0.65)
W(0 to 3) = 64.28 J
Learn more about work done here: https://brainly.com/question/25573309
#SPJ1
A body moves in an x-y plane with a velocity vm/s. The component of v are Vx=5m/s, Vy=7m/s along x and y axis respectively. What is the magnitude and direction of the velocity
the answer is in the picture ok
good luck don't worry it's a correct
#carry on learning
An upward force is applied to a 6.0–kilogram box. This force displaces the box upward by 10.00 meters. What is the work done by the force on the box?
The work done by the force on the box 588 Joule.
What is Potential energy ?It is the energy that is stored in an object due to its position relative to some zero position.
According to the question,
Given mass of the box (m) = 6.0 kg
Given displacement of the box = 10.00 m
Hence , the height of the box (h) = 10.00 m
Acceleration due to gravity (g) = 9.8 m/s²
Since ,
The upward force was applied to the box, the box moves up to the height.
Therefore, the work done by the ball is the potential energy gained by the ball.
By using the formula of potential energy
P.E. = mgh
= 6 × 9.8 × 10 Joule = 588 Joule
As we know .
Work done (W) = Potential energy (P.E.)
Work done (W) = 588 Joule
Thus, 588 Joule is the work done by the force on the box.
Learn more about Potential energy here:
https://brainly.com/question/24284560
#SPJ1
A resistor has a resistance of 8.2 kΩ. If a voltage of 15.9 V were placed across it, what would be the current, in mA? Give the answer to two decimal places; don't worry if the computer adds zeroes.
The value of the electric current for the given conditions willl be 1939.02 A.
What is ohm’s law?Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.
Ohm's law claims that the voltage across a conductor is direct to the current flowing through it. This current-voltage connection may be expressed mathematically as,
V=IR
15.9 V = I × 8.2 × 10³ Ω
I = 1939.02 A
Hence, the value of the electric current for the given conditions willl be 1939.02 A.
To learn more the ohm's law refer to the link;
https://brainly.com/question/796939
#SPJ1
(2.) Jerry first walks 5m to East, then 6m to N 60 E, then, she walks 16m to N30'W, 3 finally turns he face and moves 3V3m to south. What is her displacement and direction?
The displacement is determined to be 5.11 m after every direction is plotted on the page.
What is displacement?Displacement is defined as the shortest distance between the two points.
The steps in which Jerry walks;
5m to East
6m to N 60' E,
16m to N30'W,
Turn
3√3 m to the south.
Each and every direction is plotted on the page and obtained that the displacement is found as 5.11 m.
To learn more about displacement refer to the link;
https://brainly.com/question/10919017
#SPJ1
what is the formula for finding balance length
Answer:
Case 1: Balancing length when cell is shunted l1 = 150 cm = 1.5 m, Value of shunt = R = 5 ohm. Case 2: Balancing length when cell is shunted l1 = 175 cm = 1.75 m, Value of shunt = R = 10 ohm. Example 06: A cell balances against a length of 250 cm on potentiometer wire when it is shunted by a resistance of 10 ohms
After the terrorist attacks of September 11th, 2001, the National Center on the Psychology of Terrorism was founded to research psychological aspects of terrorism. This is an example of how __________ affect theories and perspectives in psychology.
A.
current events
B.
new discoveries
C.
oppositions
D.
personal ideologies
The glucometer applies a potential difference of 0.90 volts across a blood sample. The glucose concentration of the blood sample is 0.98 grams/litre. Determine the current in the blood sample.
The amount of current in the blood sample is determined as 0.12 A.
Current in the blood
The current in the blood is calculated by applying Ohm's law as shown below;
V = IR
where;
V is voltageI is currentR is resistanceFrom resistivity chart corresponding to 0.98 g/L, resistance, R = 7.4
I = V/R
I = 0.9 /7.4
I = 0.12 A
Learn more about current here: https://brainly.com/question/25537936
#SPJ1
A person who falls between introversion and extroversion is
Answer:
the answer is ambivert have a good fourth of July
Answer:
i believe the answer is ambivert
what type of energy does a pv cell create ?
Answer: Solar Photovoltaic (PV) cells generate electricity by absorbing sunlight and using that light energy to create an electrical current. There are many PV cells within a single solar panel, and the current created by all of the cells together adds up to enough electricity to help power your school, home and businesses.
--Cited from Solar Schools
Two force of 20N and 40N act at a
Point and the angle between them is 50 degrees.
Find the resultant force
Find the direction using sine rule
R=√20²+40²+2.20.40 cos 50
R=55 N
R/sin β = F/sin α
55/sin 50 = 40/sin α
α = 33°
Two masses, m and 2m, approach each along a path at right angles to each other. After collision, they stick together and move of at 2m/s at angle 37⁰ to the original direction of the mass m. What where the initial speeds of the two particles?
The initial speed of the object with mass "m" is 4.79 m/s and the initial speed of the object with mass "2m" is 1.81 m/s.
Initial speed of the two massesThe initial speed of the two masses is calculated by applying the principle of conservation of linear momentum as follows;
m₁u₁ + m₂u₂ = v(m₁ + m₂)
let m be in horizontal directionlet 2m be in vertical directionangle between the two masses = 90 degreesin y - direction[tex]m_1u_1sin(\theta_1) + m_2u_2sin(\theta_2) = (m_1 + m_2)vsin(\theta_3)\\\\mu_1sin(0) + 2mu_2sin(90) = (m + 2m)(2)sin(37)\\\\2mu_2 = 3.61m\\\\u_2 = \frac{3.61 m}{2m} \\\\u_2 = 1.81 \ m/s[/tex]
in x - direction[tex]m_1u_1sin(\theta_1) + m_2u_2sin(\theta_2) = (m_1 + m_2)vsin(\theta_3)\\\\mu_1cos(0) + 2mu_2cos(90) = (m + 2m)(2)cos(37)\\\\mu_1 = 4.79 m\\\\u_1 = 4.79 \ m/s[/tex]
Thus, the initial speed of the object with mass "m" is 4.79 m/s and the initial speed of the object with mass "2m" is 1.81 m/s.
Learn more about initial speed here: https://brainly.com/question/24493758
#SPJ1
A pendulum swings to and fro every 2.0 s. The period of the swing is.
O 2 Hz
2 s
O 0.5 s
O 0.5 Hz
Answer:
Explanation:
Solution
In physics, a period is a measurement of time. The answer must be either B or C. It is a direct measurement of time, not its reciprocal. So the answer is B. A and D is a measurement of the actual cycle that it takes before the motion begins to repeat itself.
Answer
B
Why is it important to remember "association, not
causation" when discussing correlations?
It is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.
What is the value of associations in science?The associations among variables have a fundamental value in science because they can determine how such variables behave in hypothetical situations.
Moreover, correlation only indicates a type of association between variables and therefore it is less informative.
In conclusion, it is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.
Learn more about associations in science here:
https://brainly.com/question/26998752
#SPJ1
What is the frequency of light with a wavelength of 2.10 × 10-7 m?
Answer:
V = ?
C = 3 × 10^8
wavelength = 2.10 × 10^-7
wavelength = C/V
V = C/wavelength
V = 3 × 10^8/2.10 × 10^-7
V = 1.43 × 10^ 15
Need help with this question!
Answer:(note that values will be on top in small)
cobalt :- 60Co
potassium :- 40K
neon :- 24Ne
lead :- 208Pb
An object weighs 200N, what is its mass?
Answer:
kg
Explanation:
the highr and jebad to kilogram mizans
Answer:
w=m×g
Explanation:
w is given and take g as 9.8m/s^2
2. Two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M (see figure). M r m L m Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects. Is the rod being compressed, stretched, or neither? If compressed/stretched, calculate the magnitude of this deformation force on the rod. If neither, explain clearly why.
The rod is stretched due to the force of gravitational attraction.
The magnitude of the deformation force on the rod is -GMm×((1/r² + 1/(L+r)²)
What is gravity?The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.
The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.
F = GMm/R²
Given are two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M. Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects.
Let the mass closer to the planet is A and the other is B
FA = Force on planet A = -GMm/r²
FB = Force on planet B = -GMm/(L+r)²
Net Force on the rod is given by the addition of the individual forces.
Fnet= FA + FB = -GMm/r² -GMm/(L+r)²
Fnet = -GMm×((1/r² + 1/(L+r)²)
Thus, the magnitude of the deformation force on the rod is derived above.
A experience more force than B, so A will stretch out from B. Hence the force is stretching the rod.
Learn more about gravity.
brainly.com/question/4014727
#SPJ1
A satellite circles the Earth in an orbit whose radius is twice the Earth’s radius. The Earth’s mass is 5.98 x 1024 kg, and its radius is 6.38 x 106 m. What is the period of the satellite?
Hello!
Recall the period of an orbit is how long it takes the satellite to make a complete orbit around the earth. Essentially, this is the same as 'time' in the distance = speed * time equation. For an orbit, we can define these quantities:
[tex]d = 2\pi r[/tex] ← The circumference of the orbit
speed = orbital speed, we will solve for this later
time = period
Therefore:
[tex]T = \frac{2\pi r}{v}[/tex]
Where 'r' is the orbital radius of the satellite.
First, let's solve for 'v' assuming a uniform orbit using the equation:
[tex]v = \sqrt{\frac{Gm}{r}}[/tex]
G = Gravitational Constant (6.67 × 10⁻¹¹ Nm²/kg²)
m = mass of the earth (5.98 × 10²⁴ kg)
r = radius of orbit (1.276 × 10⁷ m)
Plug in the givens:
[tex]v = \sqrt{\frac{(6.67*10^{-11})(5.98*10^{24})}{(1.276*10^7)}} = 5590.983 m/s[/tex]
Now, we can solve for the period:
[tex]T = \frac{2\pi (1.276*10^7)}{5590.983} =\boxed{ 14339.776 s}[/tex]
i need help with lab
(a) The equilibrant C for force of vector A and B is 3.43 N.
(b) The equilibrant C for fx of vector A and B is 2.1 N.
(c) The equilibrant C, for fy of vector A and B is 2.12 N.
What is equilibrant force?An equilibrant force is a single force that will bring other bodies into equilibrium.
From configuration 1:Vector A: mass = 0.2 kg, θ = 20⁰
Vector B: mass = 0.15 kg, θ = 80⁰
Fx = mg cosθ
Fy = mg sinθ
where;
m is mass g is acceleration due to gravityVector AForce of A due to its weight
F(A) = mg
F(A) = 0.2 x 9.8 = 1.96 N
Fx = (0.2 x 9.8) cos(20) = 1.84 N
Fy = (0.2 x 9.8) sin(20) = 0.67 N
Resultant forceR = √(0.67² + 1.84²)
R = 1.96 N
Vector BForce of B due to its weight
F(B) = mg
F(B) = 0.15 x 9.8
F(B) = 1.47 N
Fx = (0.15 x 9.8) cos(80) = 0.26 N
Fy = (0.15 x 9.8) sin(80) = 1.45 N
Resultant forceR = √(0.26² + 1.45²)
R= 1.47 N
Equilibrant C of vector A and BEquilibrant force:
Force, C = 1.96 N + 1.47 N
Force, C = 3.43 N
Equilibrant FX:
Fx, C = Fx(A) + Fx(B)
Fx, C = 1.84 N + 0.26 N = 2.1 N
Equilibrant FY:
Fy, C = Fy(A) + Fy(B)
Fy, C =0.67 N + 1.45 N = 2.12 N
Learn more about equilibrant force here: https://brainly.com/question/8045102
#SPJ1
The following equation shows the position of a particle in time t, x=at2i + btj where t is in second and x is in meter. A=2m/s2, b=1m/s. Find
A, the average velocity of the particle in the time interval t₁=2sec and t₂=3sec
B, the velocity and acceleration at any time t.
C, the average acceleration in the time interval given in part (a)
will give brilliance
A. The average velocity of the particle in the time interval t₁=2sec and t₂=3sec is 4 i m/s.
B. The velocity and acceleration at any time t is 4t i +1 j and 4i.
C. The average acceleration in the time interval given in part (a) is 4
What is acceleration?Acceleration can be defined as the rate change of velocity with time.
acceleration a = (Δv) / (Δt)
Given the following equation shows the position of a particle in time t, x=at² i + bt j
where t is in second and x is in meter. a=2m/s², b=1m/s.
A. Velocity is time rate of change of displacement.
V = dx/dt
V = d/dt (2t² i + 1t j)
V = 4t i +1 j
Velocity in time interval,
At t₁=2sec , V₂= 4x2 i + 1 j = 8 i + 1 j
At t₂=3sec, V₃ = 4x3 i + 1 j = 12 i + 1 j
Average velocity in time interval t₁=2sec and t₂=3sec is
, V₃ - V₂ = (12 i + 1 j) - ( 8 i + 1 j )
Average velocity = 4 i
B. Velocity at time t, is
V(t) = V = 4t i +1 j
Acceleration a = dV/dt
a(t) = d/dt (4t i +1 j)
a(t) = 4 i +0 j
C. Average acceleration in time interval t₁=2sec and t₂=3sec is
a = 4 m/s²
Learn more about acceleration.
https://brainly.com/question/12550364
#SPJ1
Which two of the following statements best describe the similarity between elements and compounds? 1. Elements and compounds are listed in the periodic table. 2. Elements and compounds are both pure substances. 3. Elements and compounds are both made of different kinds of atoms. 4. Elements and compounds cannot be broken down by physical changes.
The road from city A to city B is described by a car with Vm 40 km / h. When the car turns (from B to A) the average speed is 60 km / h. Find the average round trip speed.
Answer:
i think the answer is 20.......
Two identical 3.0-kg cubes are placed on a horizontal surface in
contact with one another. The cubes are lined up from left to
right and a force F₁ is applied to the left side of the left cube
causing both cubes to move at a constant speed v. If the
coefficient of kinetic friction between the cubes and the
surface is 0.3, what is the magnitude of the force exerted by the
left cube on the right cube?
(3
The magnitude of the force exerted by the left cube on the right cube is 17.64N.
What is frictional force?When an object is moving on a rough surface, it experiences opposition. This opposing force is called the friction.
Two identical 3.0-kg cubes are placed on a horizontal surface in contact with one another. The cubes are lined up from left to right and a force F₁ is applied to the left side of the left cube causing both cubes to move at a constant speed v. The coefficient of kinetic friction between the cubes and the surface is 0.3.
From the equilibrium of forces in vertical direction
Normal force N= 2m x g
friction force f = μN =μ(2m)g
From the equilibrium of forces in horizontal direction
F₁ =ma =0
using Newton's third law of motion, we get
F₁ - f =0
F₁ =f = μ(2m)g
Put the values, we get
F₁ = 17.64N
Thus, magnitude of the force exerted by the left cube on the right cube is 17.64N.
Learn more about friction force.
https://brainly.com/question/1714663
#SPJ1
Water flows with a volume flow rate of 1.44 m³/s in a pipe. Find the water speed where the pipe radius is 0.430 m.
Answer:
0.6192
Explanation:
1.44 x 0.430=0.6192
Question 2 of 25
What is the term for a pair of forces described by Newton's third law?
A.
Normal-friction pair
B.
Action-reaction pair
C.
Kinetic-static pair
D.
Inertia-movement pair
The term for a pair of forces described by Newton's third law is action-reaction pair. Details about Newton's law can be found below.
What does Newton's third law state?Newton's third law of motion states that for every action, there is an equal and opposite reaction.
This law proposed that when an object 1 acts on object 2 with a force of a particular magnitude, object 2 also acts on object 1 with an opposite force of same magnitude.
Therefore, it can be said that the term for a pair of forces described by Newton's third law is action-reaction pair.
Learn more about Newton's third law at: https://brainly.com/question/23772134
#SPJ1
A 2100-W hair dryer is operated on a 120-V
circuit for 12 min. If electricity
costs $0.25/kWh, what was the cost (in
cents) of using the blow dryer? Round final
answer to the nearest cent.
Answer:
cost=$15
Explanation:
given;
P= 2100 W
t= 12'= 720 sec=0.2h
V= 120 V
required;
Energy?
cost?
solution;
Energy(kWh) = power*time(in hour)
E=2100*0.2= 420 kWh
cost= 420 kWh* $0.25/kWh
cost= $15
since blow dryer use 120-V
A 0.15-kilogram baseball moving at 43 meters per second was stopped by the catcher’s glove in 0.050 seconds. What was the average force exerted on the ball by the glove? Round your answer to two significant figures.
The average force exerted on the ball by the glove will be 129 N.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.
Given data;
Mass,(m)=0.15-kilogram
Initial speed,u=43 meters per second
Time period,t= 0.050 seconds
Average force exerted,F=?
The average force exerted on the ball by the glove is;
[tex]\rm F = m\frac{v-u}{t} \\\\ F=0.15( \frac{43-0}{0.050} )\\\\ F=129 N[/tex]
Hence, the average force exerted on the ball by the glove will be 129 N.
To learn more about the force refer to the link;
https://brainly.com/question/26115859
#SPJ1
What is the force of gravity in water
Using the terminal velocity from Q2 and the other necessary values given previously, calculate C for the coffee filter. Show all your work—you may use the equation editor or insert a picture of your handwritten work. What are the units for C?
terminal velocity from Q2 is 0.85 m/s
The drag coefficient (C) is determined from terminal velocity, density of the medium, projected area and mass of the object.
What is terminal velocity?
Terminal velocity is the constant speed of a freely falling object when the resistance of the medium through which it is falling prevents further acceleration.
The magnitude of terminal velocity is calculated as;
[tex]V_T = \sqrt{\frac{2mg}{\rho A C} }[/tex]
where;
m is mass of the objectg is acceleration due to gravityρ is the density of the medium (coffee)C is drag coefficientA is projected areaThus, the drag coefficient (C) is determined from terminal velocity, density of the medium, projected area and mass of the object.
Learn more about terminal velocity here: https://brainly.com/question/13655133
#SPJ1