Answer:
24ms^-2 (2 sig figs)
Explanation:
F = ma
This means that the sum of all forces (or the net force) acting upon an object is equal to its mass x accelleration.
Its important to convert all parts of this equations in to SI units such that Force (N), Mass (kg) and Accelleration (ms^-2) to make sure that your answer is in the correct units.
F = ma so 5 = 0.21a
a = 5/0.21
a = 23.810 ms^-2 (5 sig figs)
Question 2 (1 point)
70 cm are equivalent to how many m? State your answer using Scientific Notation.
70 x 10^-2 m
b
7.5 x 10^-2 m
이
ОООО
с
.75 X 10^-2 m
d
0.75 x10^-2 m
uction
Answer:
A) 70 x 10^-2
Explanation:
it would be 70 times negative 100 which equals 0.70
Use the worked example above to help you solve this problem. The amount of charge that passes through a filament of a certain lightbulb in 2.09 s is 1.56 C. (a) Find the current in the bulb. A (b) Find the number of electrons that pass through the filament in 5.24 s. electrons (c) If the current is supplied by a 12.0-V battery, what total energy is delivered to the lightbulb filament
Answer:
a) i = 0.746 A, b) # _electron = 2.44 10¹⁹ electrons, c) E = 1.87 10⁴ J
Explanation:
a) The definition of current is the charge per unit of time
i = Q / t
i = 1.56 / 2.09
i = 0.746 A
b) Let's look for the cargo in passing at this time
i = Q / t
Q = i t
Q = 0.746 5.24
Q = 3.904 C
an electron has a charge e = -1.6 10⁻¹⁹ C, let's use a direct proportions rule
# _electron = 3.904 C (1 electron / 1.6 10⁻¹⁹)
# _electron = 2.44 10¹⁹ electrons
the number of electrons has to be an integer
c) In this part you are asked to calculate the power
P = V i
P = 12 0.746
P = 8.952 W
P = E/t
E = P t
E = 8.952 2.09
E = 1.87 10⁴ J
Albert's laboratory is filled with a constant uniform magnetic field pointing up everywhere. Into this magnetic field albert throws some charges. He throws the charges in different directions, and observes the resulting magnetic forces on them. Given the sign of each charge and the direction of its velocity, determine the direction of the magnetic force (if any) acting on the charge.
Resulting magnetic force:
Positive charge moving south:
Negative charge moving west:
Negative charge not moving at all:
Positive charge moving up:
Positive charge moving east:
Negatve charge moving down:
Negative charge moving north:
Positive charge not moving at all:
Positive charge moving west:
Negative charge moving south:
Negative charge moving east:
Positive charge moving north:
options: up, down, no force, north, south, east, west
Answer:
Follows are the solution to this question:
Explanation:
The magnetic force is parallel to a [tex]\bar{V} \times \bar{B}[/tex] axis, through right law. The direction would be in a reverse way for a positive particle. The gravitational flux is upward.
1) Its magnet strength will be directed westward.
2) The [tex]\bar{V} \times \bar{B}[/tex] path is parallel to the east. The permanent magnet is oriented against the south so because the object is considered impolite.
3) Its gravitational field of the velocity v of the object is zero. Thus no force was its solution.
4) The magnetic field and velocity are all on the same track. The magnetic strength is also zero. Consequently, the answer is no power.
5) Its gravitational field is to the south.
6) Its magnetic field, as well as the speed, are different. Which magnet strength is also zero. Consequently, no power is the answer.
7) Accessible in French only. The [tex]\bar{V} \times \bar{B}[/tex] direction parallel to the east. Its magnetic energy is guided west because the particle is charged negatively.
8) Unless the particle velocity is 0, the magnetic strength is 0. Consequentl, no power is the response.
9) Its magnet power is from the north.
10) Another one of these: The [tex]\bar{V} \times \bar{B}[/tex] is parallel to the west. Its gravitational field is oriented to the east as the object is negatively charged.
11) The Pope said the following: The [tex]\bar{V} \times \bar{B}[/tex] direction is parallel to the south. The gravitational fluid is transmitted towards the North because a particle is considered impolite.
12) The gravitational field is from the east.
A girl and a boy are riding on a merry-go-round that is turning at a constant rate. The girl is near the outer edge, and the boy is closer to the center. Who has greater angular displacement?
a) boy
b) girl
c) both have the same angular displacement
Answer:
c) both have the same angular displacement
Explanation:
In this scenario, girl and a boy are riding on a merry-go-round that is turning at a constant rate. The girl is near the outer edge, and the boy is closer to the center. Therefore, both have the same angular displacement.
which simple machines make up a wheel barrow
Answer:
a lever and a wheel and axle (i guess)
Explanation:
don't have any
Transduction is:
A. sending information to the central nervous system.
B. turning energy into nerve impulses.
C. the process of seeing and hearing.
D. transferring information
Answer:
D
Explanation:
the answer is d because process of genetic recombination in bacteria in which genes from a host cell (a bacterium) are incorporated into the genome of a bacterial virus (bacteriophage) and then carried to another host cell when the bacteriophage initiates another cycle of infection
A 30.0 uC charge is moved 5.00 m West in an electric field of 4000 V/m pointing 40.0° North of East. What potential difference did the charge move through?
Answer:
20000sin(40) V
Explanation:
Consider component to the east of electric field:
[tex]E_{x} =4000 sin(40)[/tex]
The charge move along this component for 5 meter
Potential difference:
[tex]5E_{x} =20000sin(40)[/tex] = 12900 V (corr, to 3 sig,fig.)
The potential difference through which the charge moved is approximately 20.0 V.
To calculate the potential difference (ΔV) through which the charge moved, we can use the formula:
ΔV = q * E * d * cos(θ)
where:
q = charge = 30.0 uC = 30.0 x 10⁻⁶ C (converted to coulombs)
E = electric field = 4000 V/m
d = displacement = 5.00 m
θ = angle between the electric field and the displacement = 40.0°
Now, substitute the values into the formula:
ΔV = (30.0 x 10⁻⁶ C) * (4000 V/m) * (5.00 m) * cos(40.0°)
First, convert the angle to radians:
θ_radians = 40.0° * (π/180) ≈ 0.6981 radians
Now, calculate ΔV:
ΔV = (30.0 x 10⁻⁶ C) * (4000 V/m) * (5.00 m) * cos(0.6981) ≈ 0.02 V
So, the potential difference through which the charge moved is approximately 20.0 V.
To learn more about potential difference, here
https://brainly.com/question/23716417
#SPJ2
Three adjacent keys on a piano (F, F-sharp, and G) are struck simultaneously, producing frequencies of 349, 370, and 392 Hz. What beat frequencies are produced by this discordant combination?
Answer:
21 Hz, 43 Hz and 22 Hz
Explanation:
The computation of the beat frequencies that are generated by this discordant combination is as follows:
As we know that
beat frequencies = |f_1 - f_2|
So
For the first one
= |349 Hz - 370 Hz|
= 21 Hz
For the second one
= |349 Hz - 392 Hz|
= 43 Hz
And, for the third one
= |370 Hz - 392 Hz|
= 22 Hz
unlike punishment, reinforcement ____
A. indicates what not to do
B. promotes discrimination
C. promotes generalization
D. indicate what to do
Answer:
B...................
Messages from the Perseverance Rover on Mars reach Earth in 11 min. The speed of light is 3.00 x 108 m/s. Using this information, how far is Mars from Earth?
Answer:
[tex]d=1.98\times 10^{11}\ m[/tex]
Explanation:
Messages from the Perseverance Rover on Mars reach Earth in 11 min i.e. time is 660 s
The speed of light is [tex]3\times 10^8\ m/s[/tex]
We need to find the distance between Mars and Earth. Let the distance be d.
We know that,
Distance = speed × time
So,
[tex]d=660\times 3\times 10^8\\\\d=1.98\times 10^{11}\ m[/tex]
So, Mars is [tex]1.98\times 10^{11}\ m[/tex] from the Earth.
In SI units, what is the magnitude the net force acting on a 1,152 kg car that accelerates uniformly along a straight line from a speed of 3 m/s to a speed of 17 m/s in 5s?
Answer:
Fnet = 14515.2 Newton
Explanation:
Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.
Mathematically, net force is given by the formula;
[tex] Fnet = Fapp + Fg[/tex]
Where;
Fnet is the net force. Fapp is the applied force. Fg is the force due to gravitation.Given the following data;
Mass = 1,152 kg
Initial velocity, u = 3m/s
Final velocity, v = 17m/s
Time, t = 5 seconds
To find the magnitude of the net force;
First of all, we would determine the acceleration of the car.
Acceleration = (v-u)/t
Acceleration = (17 - 3)/5
Acceleration = 14/5
Acceleration = 2.8m/s
To find the applied force;
Fapp = mass * acceleration
Fapp = 1,152 * 2.8
Fapp = 3225.6 N
Next, we would find the force exerted on the car due to gravity.
Fg = mass * acceleration due to gravity
We know that acceleration due to gravity is equal to 9.8m/s²
Fg = 1152 * 9.8
Fg = 11289.6N
Substituting the values into the equation, we have;
Fnet = 3225.6 + 11289.6
Fnet = 14515.2 Newton
Force = mass X acceleration. Acceleration due to gravity is 9.8 m/s/s regardless of height or mass. This means a single object will hit the ground with the same force regardless of the height it is dropped from. If this is true, I normally drop a pumpkin from different heights during this unit. why does dropping the pumpkin stay together when dropped from one meter but break apart when dropped from a height of 5 meters?
What is a black hole's escape velocity?
The simplest definition of a black hole is an object that is so dense that not even light can escape its surface. If we squished the Earth's mass into a sphere with a radius of 9 mm, the escape velocity would be the speed of light. Just a wee-bit smaller, and the escape velocity is greater than the speed of light.
HopeItHelps!
How can you explain the process of reflection based from your experience?
Answer:
Reflection brings learning to life. Reflective practice helps learners find relevancy and meaning in a lesson and make connections between educational experiences and real life situations. It increases insight, and creates pathways to future learning. Reflection is called by many different names in the education field including processing, reviewing, and debriefing. I personally have moved towards referring to this key ingredient in teaching and group facilitation as reflection or reflective practice.
Explanation:
What is the speed of a vehicle that travels 50 meters in 5 seconds m/s
Answer:
10m/s
Explanation:
S=D/T
S=50m/ 5sec (make sure to write correct units, they sometimes mark you on that in physics)
S=10 m/sec (be careful of what the units that they want the answer in, different story if it was m/min
Question 3 (5 points)
Yissel was going to be late to Mr. Scharff's science class. Just as the bell was about to ring. Vissel ran the last little bit of the hallway at 2.47
meters/second for 8 seconds to beat the bell. How far away was Yissel from Mr. Scharff's classroom when she started to run?
what is the effect of divorce on females?
Answer:
Numerous studies have shown that the economic costs of divorce fall more heavily on women. After separation, women experience a sharper decline in household income and a greater poverty risk (Smock 1994; Smock and Manning
Answer:
sadness and stress...................
Determine the speed of sound on a cold winter day (Temperature = 3ºC). *
Answer:
Temperature and Speed of Sound
Temperature of AirSpeed of Sound Waves (m/s)0 °C33120 °C343100 °C386
Explanation:
What is the magnitude of the electric field strength between them, if the potential 7.05 cm from the zero volt plate (and 2.95 cm from the other) is 293 V?
Answer:
E = 4156.02 Vm⁻¹
Explanation:
The magnitude of the uniform electric field between the plates can be given by the following formula:
[tex]E = \frac{\Delta V}{d}\\[/tex]
where,
E = Electric field strength = ?
ΔV = Potetial Difference = 293 V
d = distance between plates = 7.05 cm = 0.0705 m
Therefore,
[tex]E = \frac{293\ V}{0.0705\ m}\\\\[/tex]
E = 4156.02 Vm⁻¹
4. Which of these is exerted by an engine?
(1 Point)
Thrust
Water resistance
Friction
Air resistance
Air resistance is exerted by an engine
Two loudspeakers, A and B are driven by the same amplifier and emit sinusoidal waves in phase. Speaker B is 2.00 m to the right of speaker A. The frequency of the sound waves produced by the loudspeakers is 206 Hz. Consider a point P between the speakers and along the line connecting them, a distance x to the right of A. Both speakers emit sound waves that travel directly from the speaker to point P. For what values of x will:
a. destructive interference occur at P
b. constructive interference occur at P
Answer:
a) 0, ±1.65 b) ± 0.825m
Explanation:
This is a sound interference exercise, it can be described by the path difference between the two waves
for the case of constructive interference
Δr = 2n λ/ 2 n = 0, 1, 2 ...
for the case of destructive interference
Δr = (2n + 1) λ/ 2
the speed of sound is related to the wavelength
v = λ f
λ = v / f
λ= 340/206
λ = 1.65 m
let's set a reference system in the center between the two speakers
a) let's find the distances for constructive interference
Δr = 2n 1.65 / 2
Δr = 1.65 n
* the first interference occurs at n = 0
Δr = 0
therefore the interference in the center is maximum
* n = 1
Dr = 1.65 m
the second inference occurs at 1.65 m from the center, therefore there is a right wing and a left wing,
We do not have any more interference between the speakers because
n = 2 Δr = 3.3m this distance can be from the speaker
b) let's look for the destructive interference points
Δr = (2n + 1) 1.65 / 2
Δr = (2n + 1) 0.825
m = 0 Δr = 0.825m
m = 1 Δr = 2,475m
We can see that we only have the first destructive interference, one on each side.
Soda pop cane are made of aluminum having thickness of 0.12 mm. They are typically kept at a temperature of 4°C in refrigerator. Such cane has height of 4.83 inch and diameter of 2.6 inch. Suppose you bought such a cold soda pop and brought into the class where the temperature is 25°C.
Required:
Calculate the rate of heat transfer of the coke cane to the surroundings.
Answer:
Explanation:
For flow of heat through conduction , the formula is
Q = KA( T₂ -T₁ ) / d where K is thermal conductivity of material , A is surface area , T₂ - T₁ is temp diff .
Thermal conductivity of aluminum is 205 W /m.s
Surface area of cane = 2π r² + 2π r h where r is radius and h is height of cane .
A = 2π r ( r + h )
= 2 x 3.14 x 1.3 x .0254 ( 1.3 x .0254 + 4.83 x .0254 )
= .20736 ( .033 + .12268 )
A = .03228 m²
thickness d = .12 x 10⁻³ m
Putting the values ,
Q = 205 x .03228 x ( 25 - 4 ) / .12 x 10⁻³
= 1158 x 10³ J /s
3. 20P. The potential energy of a two particles is given by
Explanation:
The potential energy of two particles system will be given by the negative of work by gravitational force due to particle (1)as the second particle is brought from infinity : Gravitational potential energy Second particle is brought in the gravitation of first particle.
Suppose you need to design a clipper circuit to clip off the portions of an input voltage that fall above +5 V or below +2 V. Assume that diodes having a constant forward drop of 0.7 V are available. Ideal Zener diodes of any breakdown voltage required are available. Dc voltage sources of any value needed are available.
Answer:
attached below
Explanation:
The required design for a clipper circuit is attached below
From the attached circuit
It can be seen that the battery voltage needs to be high so that it will be in forward bias considering the assumption that the diodes have a constant forward drop of 0.7 V.
hence 4.3 has to be >2.7
Physical quantities are generally not purely numerical: They have a particular dimension or combination of dimensions associated with them. Thus, your height is not 74, but rather 74 inches, often expressed as 6 feet 2 inches. Although feet and inches are different units they have the same dimension--length.
Required:
a. Find the dimensions [V] of volume.
b. Find the dimensions [v] of speed.
Answer:
a, The dimension of volume is L³
b. The dimension of speed = L/T
Explanation:
The three fundamental quantities are Mass, Length and time. Other physical quantities are obtained from or derived from these three. These other quantities are known as derived quantities. The units of the fundamental quantities are Kilogram (kg) for Mass, meters for length, and second for time.
In the given question:
a. Volume = length * breadth * height
since breadth and height all measure length, the dimension of volume becomes:
volume = length * length * length = L³
Thus, the dimension of volume is L³
b. Speed, v = distance/time
Distance measures length, therefore, the dimension of speed will be:
Speed = length / time = L/T
Therefore, the dimension of speed = L/T
In the Styrofoam ball investigation, it is likely that the charges on the ball and rod are
?
A. the same
B. opposite
C. constantly changing.
Answer:
answer = opposite
they are not changing being in a place as being they-self
the same would not be true because its different then the Styrofoam and it could only be different and its make the most sense aswell.
Both ball and rod has opposite charges on their bodies because of presence of different charges on it.
What are the charges on ball and rod?In the Styrofoam ball investigation, it is likely that the charges on the ball and rod are opposite because Styrofoam ball is negatively charged due to the presence of electrons while on the other hand, the rod is positively charged because of lining of positive charges on the rod.
So we can conclude that both ball and rod has opposite charges on their bodies because of presence of different charges on it.
Learn more about charges here: https://brainly.com/question/25923373
#SPJ2
Explain why two electric charges of the same magnitude, when on a collision course with each other, won't actually collide
(serious answers only)
Answer:
Explanation:
When two charges of equal magnitude and sign approach each other, they interact through Coulomb's law
F = [tex]k \frac{q_ 1q_2}{z^2 }[/tex]k q1 q2 / r2
In you case the house are of equal magnitude and sign
q1 = q2 = q
F = k q2 / r2
Let's analyze this expression, the charge is repulsive on each charge, when they are on a collision course as they approach they feel an electric field opposite to their direction of movement, this field decreases its speed, the closer they get, the greater the repulsive force. , up to the point where this force is equal to or greater than the impulse, therefore the point where the velocity reaches zero, for this reason the particles do not actually touch
Write a conclusion to this lab in which you discuss when a person on a roller coaster ride would have sensations of weightlessness and when they would have sensations of weightiness. In your discussion, talk about accelerations and forces. Then finish off your conclusion by using Newton's second law to explain why such accelerations and force conditions cause these sensations.
Answer:
he lower part of the curve N = M (g + v² / r)
upper part of the curve N = m (v² /r -g)
Explanation:
In a roller coaster there is a long climb that allows the car to acquire gravitational potential energy, when this energy is converted into kinetic energy, there is a raven, in these curves we have two parts the lower part, where you have a feeling of great weight and another in the upper part where you have a feeling of weightlessness.
These sensations can be explained using Newton's second law, let's apply it to the lower part of the curve
N-W = m a
acceleration is centripetal
a = v² / r
we substitute
N = mg + m v² / r
N = M (g + v² / r)
In this part the apparent weight is increased by the speed of the body squared, it feels like a lot of fart.
In the upper part of the curve the force of gravity continues to act downwards, the normal that is the reaction of the surface also goes downwards, the centripetal acceleration pointing towards the center of the curve has a vertical downward direction
-N -W = -m a
N = ma -W
N = m (v² / r -g)
In this case we see that the normal that gives the sensation decreases, which is why we feel a loss of weight, in the case of v2 / r = g, the request is total and the sensation of weightlessness.
A piece of glass with index of refraction 1.50 is coated with a coating of thickness 138 nm and index of refraction 1.22. Light traveling perpendicular to the surface of the glass reflects at the interface between air and the coating, and at the interface between the coating and the glass. What is the largest vacuum wavelength for which the interference between the two reflected rays is completely destructive
Answer:
Explanation:
At both interface light is travelling from a medium of lower refractive index to medium of higher refractive index. So the phase difference of 180⁰ occurring at both interface will cancel out .
Net path difference = 2 μ t where μ is refractive index of thin layer and t is its thickness
For destructive interference
2 μ t = (2n + 1 )λ / 2 where λ is wavelength of light , n is any number
λ = 4 μ t / ( 2 n + 1 )
For largest wavelength , n = 0
λ = 4 μ t
= 4 x 1.22 x 138 nm
= 673.44 nm .
microwaves are produced by
Answer:
Microwaves are basically extremely high frequency radio waves, and are made by various types of transmitter. In a mobile phone, they're made by a transmitter chip and an antenna, in a microwave oven they're made by a "magnetron". Their wavelength is usually a couple of centimetres. Stars also give off microwaves.