Answer and Explanation:
The computation is shown below:
The ac frequency in the United States is 60 Hz
The ac frequency in Europe is 50 Hz
So,
Time for 25 spark in United stated is 25 ÷ 60 s
Time for 25 spark in Europe is 25 ÷ 50 s
Now
Tape length in United States is
= 0.5 × 9.8 × (25 ÷ 60)^2
= 0.85 m
= 85 cm
And,
Tape length in europe is
= 0.5 × 9.8 × (25 ÷ 50)^2
= 1.225 m
= 122.5 cm
So, As it can be seen that
= 122.5 cm - 85 cm
= 37.5 cm
Europe has 37.5 cm more than in the United States
the picture below shows a centrifuge used to test astronauts
Which vectors shows the direction of the centripetal acceleration at this point?
A. A
B. B
C. C
D. D
[PLEASE SOMEONE HELP! ASAP]
Answer: B
Explanation: just did the quiz
Vector B shows the direction of the centripetal acceleration at this point.
What is centripetal acceleration?Centripetal acceleration is the acceleration of a frame traversing a circular path. because the pace is a vector quantity (this is, it has both a magnitude, the rate, and a course), when a frame travels on a circular course, its route continuously adjustments, and accordingly its velocity changes.
What reasons for centripetal acceleration?Centripetal forces motivate centripetal accelerations. within the special case of the Earth's circular motion around the sun – or any satellite's ground movement around any celestial body – the centripetal force causing the movement is the end result of the gravitational enchantment among them.
Learn more about centripetal acceleration here: https://brainly.com/question/11770998
#SPJ2
What is the velocity of an object that has been falling freely in a vacuum
for 4 seconds?
The velocity of an object that has been falling freely in a vacuum
for 4 seconds is 39.2 m/s.
The given parameters;
time of motion, t = 4 secondsThe value acceleration due to gravity in vacuum is approximately 9.8 m/s².
The final velocity of the object is calculated as follows;
v = u + gt
where;
u is the initial velocity of the object = 0g is acceleration due to gravity in vacuumSubstitute the given parameters and solve for v;
v = 0 + 9.8(4)
v = 39.2 m/s
Thus, the velocity of an object that has been falling freely in a vacuum
for 4 seconds is 39.2 m/s.
Learn more here:https://brainly.com/question/16298299
14.4 K.L of heat is required to raise the temperature of
a 12 kg substance from 275 K to 275.5 K. Identify the
substance
Answer:
The substance is Ethanol
Explanation:
To solve this problem we must use the expression of thermal energy calculation that relates the mass of a body with the specific heat of this and the temperature difference.
Q = m*Cp*(T_f - T_i)
where:
Q = amount of heat = 14.4 [kJ]
m = mass = 12 [kg]
Cp = specific heat [kJ/kg*K]
T_f = final temperature = 275.5 [K]
T_i = initial temperature = 275 [K]
Therefore we need to calculate Cp, and then compare this with the values in the given table attached.
Cp = 14.4/(12*(275.5 - 275))
Cp = 2.4 [kJ/kg*K]
Now we compare the Cp with the values given in the table.
So the substance is Ethanol
A man bungee jumps off a bridge and is brought to a rest by the stretched
bungee cord. This is an example of which of the following?
A. long time, small force
B. long time, large force
C. short time, small force
D. short time, large force
Who knows the answer
Answer:
I'm pretty sure it's A. long time, small force.
You are waiting in line for your favorite ride and carrying a backpack with you that
weighs 20 N. You've been standing in the SAME spot in line for 5 minutes how much
power do you use? Explain your answer.
Which characteristic is present in a planet but not in a dwarf planet? A spherical shape. An orbit around the sun. An orbit cleared of other objects. A potato-like shape.
Answer: An orbit cleared of other objects.
There are three basic characteristics that a planet must have. Dwarf planets have two of these characteristics: an orbit and a spherical shape. However, dwarf planet orbits are not cleared of other objects like the orbits of planets.
What waves have a lot of energy and are potentially harmful
What is the center stone of an arch on a bridge called?
Thanks so much.
Answer:
keystone
Explanation:
Planet X has a mass of M and a radius of R. Planet Y has a mass of 3M and a radius of 3R. Identical satellites orbit both planets at a distance R above their surfaces, as shown above. The planets are separated by such a large distance that the gravitational forces between them are negligible.
How does the magnitude of the gravitational force FY exerted by Planet Y on its satellite compare to the gravitational force FX exerted by Planet X on its satellite?
Answer:
[tex]{FY} = \dfrac{3}{4} \times FX[/tex]
Explanation:
The parameters given for the planets are;
The mass of planet X = M and the radius of planet X = R
The mass of planet Y = 3·M and the radius of planet Y = 3·R
The magnitude of the gravitational force of the planets on their satellites are given by the following equation;
[tex]F=G \times \dfrac{M_{1} \cdot m_{2}}{R^{2}}[/tex]
Where;
M₁ = The mass of the first object = The mass of the planet
m₂ = The mass of the second object = The mass of the satellite
R = The distance between the centers of the two planets = The distance between the center of the planet and the satellite
G = The universal gravitational constant
The force between planet X and the satellite in its orbit = [tex]FX=G \times \dfrac{M \times m}{(2 \cdot R)^{2}} = G \times \dfrac{M \times m}{4 \cdot R^{2}}[/tex]
The force between planet Y and the satellite in its orbit = [tex]FY=G \times \dfrac{3\cdot M \times m}{(4 \cdot R)^{2}} = G \times \dfrac{3\cdot M \times m}{16 \cdot R^{2}} = G \times \dfrac{ 3\cdot M \cdot m}{16 \cdot R^{2}}[/tex]
Therefore;
[tex]\dfrac{FY}{FX} = \dfrac{G \times \dfrac{ 3\cdot M \cdot m}{16 \cdot R^{2}}}{G \times \dfrac{M \times m}{4 \cdot R^{2}}} = \dfrac{3}{16} \times \dfrac{4}{1} = \dfrac{3}{4}[/tex]
[tex]{FY} = \dfrac{3}{4} \times FX[/tex]
A motorcyclist started a race from START line and from rest, and accelerated with the acceleration of 3 m/s2 for 8 seconds. Then he was moving with a constant velocity for 2 seconds. What was the racer’s position from the START line after 8+2 seconds from the start of the race? The CHoices: 48,72,102,144,288
I REALLY NEED HELP ON THIS
a cheetah goes from standing still to running at 60 mph in 3 seconds. what is the cheetahs acceleration in standard international units?
The acceleration of the cheetahs in the standard international units would be 8.938 meters/second².
What is acceleration?The rate of change of the velocity with respect to time is known as the acceleration of the object.
As given in the problem a cheetah goes from standing still to running at 60 miles per hour in 3 seconds
1 mile = 1609 meters
60 miles = 60×1609 meters
=96540 meters
1 hour = 3600 seconds
the initial velocity of the cheetah = 0
the final velocity of the = 96540/3600
=26.8166 meters/seconds
acceleration = (final velocity - initial velocity) /time period
=(26.8166 -0)/3
=8.938 meters/second²
Thus, the cheetah's acceleration would be 8.938 meters/second².
To learn more about acceleration from here, refer to the link;
brainly.com/question/2303856
#SPJ2
1. ____________________________ is the source of energy that drives Earth's water cycle. 2. As heat energy was added to the water, it changed state from a _______________________ to a ______________________. This __________________ is also called ___________________________. 3. As more energy is added to the water, the water molecules move _________________________ and farther apart.
Answer:
When water absorbs enough heat, it becomes a gas (water vapor). This process is called evaporation.
Explanation:
do light waves move parallel
Answer: Sound waves are examples. parallel - For the purposes of this Activity Object, parallel is defined as moving in the same direction. Specifically in the case of longitudinal waves, particles move forward and back parallel to the direction of the travelling wave. ... Some examples are ocean waves and light waves.
Explanation:
1. What type of energy transformation best fits what happens in a paper shredder?
Answer:
electrical- mechanical
Explanation:
Smartness 1,000
Friend me too
A motorcyclist started a race from the start line and from rest, and accelerated with the acceleration of 3m/s2 for 8 secs. Then he was moving with a constant velocity for 2 secs. What was the racer’s position from the start line after 9+2 seconds from the start of the race?
Answer:
I dont even know my g
Explanation:
Like i cant even help u
Which game most represents a wave?
Answer:
D: tipping over dominoes
Explanation:
tipping over dominoes makes a wave-like movement
Answer:
the answer is D. just got it right 4/19/22
Explanation:
Bart carried his skateboard up a hill and then rode the skateboard down the hill. When he reached the bottom of the hill, he rolled to a stop. When did Bart have the most potential energy?
Explanation:
The potential energy of an object is given by :
P = mgh
Where,
m is mass, g acceleration due to gravity and h is the height reached by the object.
The potential energy of an object is directly proportional to the height of the object. It means that when the skateboard reaches at the maximum height, it has highest potential energy.
A 100-g bullet is fired from a rifle having a barrel 0.600 m long. Choose the origin to be at the location where the bullet begins to move. Then the force (in newtons) exerted by the expanding gas on the bullet is 15 000 1 10 000x 2 25 000x 2 , where x is in meters. (a) Determine the work done by the gas on the bullet as the bullet travels the length of the barrel. (b) What If? If the barrel is 1.00 m long, how much work is done, and (c) how does this value compare with the work calculated in part (a)?
Answer:
a) W=9000J
b) W=11,666.67 J
c) The work done by the gas with a 1 meter barrel is 2,666.67 J greater than the work done by the gas with a 0.600 m barrel. This is about 1.3 times greater.
Explanation:
(The function written in the problem isn't too clearly written, but I believe it should be like this:
A 100-g bullet is fired from a rifle having a barrel 0.600 m long. Choose the origin to be at the location where the bullet begins to move. Then the force (in newtons) exerted by the expanding gas on the bullet is [tex]15 000 + 10 000x - 25 000x^{2}[/tex] , where x is in meters. (a) Determine the work done by the gas on the bullet as the bullet travels the length of the barrel. (b) What If? If the barrel is 1.00 m long, how much work is done, and (c) how does this value compare with the work calculated in part (a)?)
a)
Since the force applied to the bullet is going to vary with the length of the barrel, we will need to make us of integration to find the work done by the gas.
So first, we start by drawing a sketch of what the problem looks like. (See attached picture). This will help us visualize the problem better.
Now, work is defined as the following integral:
[tex]W=\int\limits^a_b {F} \, dx[/tex]
The problem tells us the force exerted by the expanding gas on the bullet is:
[tex]F(x)=15,000+10,000x-25,000x^{2}[/tex]
So we go ahead and substitute this function into the integral.
[tex]W=\int\limits^{0.6}_0 {15,000+10,000x-25,000x^{2}} \, dx[/tex]
Now, before integrating that function, we can factor it so it is easier for us to integrate and to deal with the values, so we can factor a common 5,000 out, so we get:
[tex]W=5,000\int\limits^{0.6}_0 {3+2x-5x^{2}} \, dx[/tex]
and we proceed to integrate so we get:
[tex]W=5,000[3x+x^2-\frac{5}{3}x^{3}]\limits^{0.6}_0[/tex]
and evaluate the integral, so we get:
[tex]W=5,000([3(0.6)+(0.6)^2-\frac{5}{3}(0.6)^{3}]-[3(0)+(0)^2-\frac{5}{3}(0)^{3}][/tex]
Which yields:
W=9000J
b)
For part b we follow the exact same procedure but we change the limits of integration for 0 and 1 so the integral looks like this:
[tex]W=\int\limits^1_0 {15,000+10,000x-25,000x^{2}} \, dx[/tex]
and we get the following answer:
[tex]W=5,000[3x+x^2-\frac{5}{3}x^{3}]\limits^1_0[/tex]
and
[tex]W=5,000([3(1)+(1)^2-\frac{5}{3}(1)^{3}]-[3(0)+(0)^2-\frac{5}{3}(0)^{3}][/tex]
so
W=11,666.67 J
c) The difference between the two works we calculated is:
11,666.67J-9000J=2,666.67J
so the work done by the gas with a 1 meter barrel is 2,666.67 J greater than the work done by the gas with a 0.600 m barrel.
if we did the following division:
[tex]\frac{11,666.67}{9,000}=1.3[/tex]
So we can see that this is about 1.3 times greater.
Mechanical and chemical weathering depend on _______________________________________ and temperature.
A.) acid
B.)air
C.)water
Answer:
C.)water
Explanation:
Weathering is the physical disintegration and chemical decomposition of rocks to form sediments and soils.
Mechanical weathering is the breaking down of rocks by physical means.
Chemical weathering is the decay of rocks by chemical means.
Both chemical and mechanical requires water for the processes to occur. Water is usually the medium for chemical actions to take place in a rock. For mechanical processes, water in different phases plays a very important role too.Select the best answer from the choices below. Light has many properties of waves but sometimes it also behaves like: A photon Polarized light ultraviolet rays schem of particles
Answer:
The correct option is;
Stream of particles
Explanation:
Light can be observed to behave as stream of particles in the physical phenomenon of blackbody radiation and photoelectric effect whereby electrons are ejected by the impact of light such that the number of electrons ejected is a function of the amount of photons transmitted which are absorbed by the electrons before they can be ejected
The energy of the photons depends on the frequency of the light source of the photons, while the electrons are ejected when the energy of the photon is up to their threshold value
As such light can also be considered as behaving as a stream of particles called photons.
Antimony is like a nonmetal in that it is a brittle, crystalline solid, has poor electrical and heat conductivity, and has a low boiling point. However, it is also like a metal because of its shiny silver appearance and ability to form alloys.
Which of the following statements best describes antimony?
Answer:
Antimony is metalloid
Explanation:
From the properties of the metals given, we can conclude that antimony is pure a metalloid.
A metalloid has the properties of metals and non-metals.
Most metalloids will only conduct heat and electricity under certain conditions so they are poor conductors. As expected of a metal, it should be malleable and ductile but antimony is brittle and a crystalline solid. Although, it can form an alloy. We can see that most of the properties of this metal is in between those of true metals and non-metals. Therefore, antimony is a metalloid.If the word "kinetic" refers to motion/movement, why is Kinetic Sand called Kinetic sand?
Answer:
Kinetic sand is regular sand that's been coated with silicone oil
Explanation:
hope it helps
A sample of matter experiences a decrease in average kinetic energy as it continues to cool. One would anticipate that the particles will eventually come to a complete stop. The temperature at which particles should theoretically stop moving is absolute zero. Thus, option B is correct.
What theory directly contradicts concept of absolute zero?
All molecules are predicted to have zero kinetic energy and, as a result, no molecular motion at absolute zero (273.15°C). Zero is a hypothetical value (it has never been reached).
Absolute zero signifies that there is no kinetic energy involved in random motion. A substance's atoms don't move relative to one another.
Therefore, Kinetic energy because it can create heat which goes against the absolute zero. A gas molecule's kinetic energy tends to zero when the temperature reaches absolute zero.
Learn more about theory here:
brainly.com/question/18996125
#SPJ2
If you pair copper which has an electron affinity of 0.34 and silver which has an electron affinity of 0.80, will you make a strong battery or a weak one? Explain how the materials affect the function of the battery. (4 points)
4. The lightest pilot-driven airplane ever built was the Baby Bird. Suppose the Baby Bird moves along the ground without a pilot at a speed of 88.0 km/h. Under these circumstances, the momentum of the empty plane would be only 2,790 kg • m/s. What is the mass of the plane?
Answer:
Explanation:
mass x velocity
so i believe it'd be
2,790 x 88.0
but i could be wrong just an fyi
The most popular commercial aircraft worldwide range in weight from 30,900 to 127,000 pounds. Personal aircraft typically weigh between 740 to 2,750 pounds, which is a significant reduction in weight. The weight of a modern fighter jet ranges from 20,300 to 45,000 pounds. Aircraft are hefty.
How do you determine an airplane's weight?Determine the empty weight of the aircraft and the weights of passengers, luggage, and fuel by consulting the pilot's operating manual. To determine the moment, multiply each weight by the arm, which is the separation from the reference datum. To determine the gross weight, add up all the weights. To find the total moment, add all the moments together. The maximum weight of an aircraft is determined by the amount of lift that the wings or rotors can provide under the operational conditions for which the aircraft is designed. The maximum weight that the aircraft can safely carry is also limited by its structural strength. Empty weight (EW) is the sum of the manufacturer's 'as built' empty weight (MEW), any standard items (SI), and any operator items (OI), so EW = MEW + SI + OI. The EW is calculated for each aircraft series and each unique configuration of an aircraft and is validated by weighing it on a regular basis.To learn more about Mass of the plane refer to:
https://brainly.com/question/28591365
#SPJ2
If the force of gravity on an object increases, what happens to its weight?
Answer:
It also increases
Explanation:
The strength of the gravitational force between two objects depends on two factors, mass, and distance. the force of gravity the masses exert on each other. If one of the masses is doubled, the force of gravity between the objects is doubled. increases, the force of gravity decreases.
Serafina has finished cleaning and organizing her bedroom and put away the last of her shoe storage containers. She has a lifting force of 25 N and moved the container a distance of 3 meters. How much work did she do? (Make sure you include proper units in your answer.)
Answer: Work DONE =- 75Nm = 75 Joules
Explanation:
Work is done when a force applied to an object, cause a displacement by causing such object to move Thus work is calculated by multiplying the force by the distance moved by the object.
From the question,
Given that force= 25N
Distance = 3m
therefore
Work = Force x Distance
25N X 3m =
= 75 Nm = 75 Joules
A set of three resistors are set up in parallel. The resistor values are R1 = 3.0 Ohms, R2 = 11.0 Ohms, and R3 = 7.5 Ohms.
What is the total resistance of this circuit?
a
1.79 Ohms
b
0.60 Ohms
c
1.12 Ohms
d
2.97 Ohms
Answer:
A) 1.79ohms
Explanation:
Total resistance of resistors in parallel is given by ;
1/R = 1/R1 + 1/R2 +1/R3
Put in the values and make R the subject
Which of the following groups have one valence electron and are very reactive
A-column 1 alkali metals
B-Column 2 alkaline earth metals
C-column 17 halogens
D-column 18 noble gases
A brick is cut into small pieces. Which physical property do the small pieces have in common with the brick from which they came?
Answer:
Density
Explanation:
Density is defined as the ratio of mass of an object to the volume of object.
The density remains an equivalent because cutting the brick into small pieces will divide the mass & volume by an equivalent amount. This means the density of a object remains an equivalent (or same) regardless of what size shape, length, it is.
what is a scientific model in short words
Answer:A scientific model is a physical and/or mathematical and/or conceptual representation of a system of ideas, events or processes. Scientists seek to identify and understand patterns in our world by drawing on their scientific knowledge to offer explanations that enable the patterns to be predicted.
Explanation: got right
Answer:
A scientific model is a physical and/or mathematical and/or conceptual representation of a system of ideas, events or processes. Scientists seek to identify and understand patterns in our world by drawing on their scientific knowledge to offer explanations that enable the patterns to be predicted.