Answer:
Acceleration = 2.68 m/s² (Approx.)
Explanation:
Given:
Force = 792 mN = 0.792 N
Mass = 295,000 mg = 0.295 kg
Find:
Acceleration
Computation:
Acceleration = Force / mass
Acceleration = 0.792 / 0.295
Acceleration = 2.68 m/s² (Approx.)
Question 7 of 10
The Sun has a diameter of about 865,000 miles.
Suppose you were making a scale model of the
solar system with a scale of 1 inch:1,000 miles.
How wide would the Sun be in your model?
A. 865,000 inches
B. 865 inches
C. 86.5 inches
O D. 8.65 inches
Answer:
you have to decide 865,000 with 1000 and the answer is 865
How many liters of CH4 gas are there in 1.20 moles of CH4 when the gas is held under standard conditions?
Please answer quickly!
Answer:
26.88 L
Explanation:
When any gas is held under standard conditions, one mol will occupy 22.4 liters.
With the above information in mind, we can calculate how many liters would 1.20 moles of CH₄ gas occupy under standard conditions:
1.20 mol * 22.4 L/mol = 26.88 L
So 1.20 moles of CH₄ would occupy 26.88 liters.
Which term describes all the different populations within one area?
WILL GIVE BRAINLY!!
Answer:
a biotic factor это просто
How are gas particles arranged in a container?
Select one:
a.Far apart
b.Loosely arranged
c.Neatly organized
d.Tightly packed
PLSS helppp
i know how to report btw
Answer:
first one
Explanation:
Which particles make up most of the mass of an atom?
i think Neuterons i am right
Answer:
I do not know srry
Explanation:
helppppppppppppppppppppppp
ITS CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Help! Need it ASAP!
Is steam and vapour different? If they are then how are they different?
Answer:
Explanation:
Water vapor is when water molecules are present in the air, while steam is water heated to the point that it turns into gas. In simplified science, both are referred to as the gaseous state of water. Steam is usually white or translucent in nature, while water vapor can be clear or translucent.
Steam is simply, water vapor. Hence, the key difference between steam and vapor is that steam is the gaseous state of water whereas vapor is the gaseous state of any substance. Moreover, steam is typically invisible while the vapor of some substances is colorful.
Put each equation under the correct heading.
What are the two factors that can increase an object's elastic energy?
Answer:
The factors that determine the amount of elastic potential energy being stored include the type of material and the amount it is deformed. The more an object is deformed, the more stored energy it has.
Select the most likely product for this reaction:
Upper A g upper N upper O subscript 3 (a q) plus upper N a upper O upper H (a q) right arrow question mark.
AgOH(s) + NaNO3(aq)
Ag2O(s) + HNO3(aq)
Ag(s) + H2(g) + O2(g)
Answer:
(A) AgOH(s) + NaNO3(aq)
Explanation:
correct on edge 2021
Answer:
a
Explanation:
¿Cuántos gramos de dicloruro de manganeso se obtienen cuando reaccionan 7,5 g de ácido clorhídrico? MnO2 + 4 HCl = Mn Cl2 + Cl2 + 2 H2O *
Answer:
6.6 g
Explanation:
La ecuación de la reacción es;
MnO2 + 4 HCl -------> MnCl2 + Cl2 + 2H2O
Número de moles de HCl que reaccionan = 7.5g / 36.5 g / mol = 0.21 moles
Dado que;
4 moles de HCl producen 1 mol de MnCl2
0,21 moles de HCl producen 0,21 * 1/4 = 0,0525 moles de MnCl2.
Masa de MnCl2 = 125,844 g / mol * 0,0525 moles = 6.6 g
Fluorine gas reacts with aqueous iron (II) iodine to produce iron (II) fluoride and iodine liquid What is the balanced chemical equation for this reaction?
Answer:
F₂ (g) + FeI₂ (aq) → FeF₂ (aq) + I₂ (l)
Explanation:
Our reactants are:
F₂ → Fluorine gas, a dyatomic molecule
FeI₂ → Iron (II) iodine
Our products are:
I₂ → Iodine
FeF₂ → Iron (II) fluoride
Then, the reaction is:
F₂ (g) + FeI₂ (aq) → FeF₂ (aq) + I₂ (l)
We see it is completely balanced.
How many moles are in 3.0g of A1203?
Answer:
0.065 moles
Explanation:
What are the procedures for performing an acid property test
Answer:
In the context of transaction processing, the acronym ACID refers to the four key properties of a transaction: atomicity, consistency, isolation, and durability. Atomicity. All changes to data are performed as if they are a single operation
The physical state of CaBr2 at room temperature? Predict the two other properties of CaBr2 Deduce the charge of ion Ca in the compound CaBr2
Answer:
CaBr2 is a colorless solid and the charge on Calcium is +2
Explanation:
CaBr2 is a colorless solid at room temperature.
Other properties include -
a) It is a crystalline solid
b) Melting point of 765°C.
c) It is deliquescent
d) Soluble in water and absolute alcohol.
The charge of Br is -1. Here two atoms of Br attaches with one atom of calcium. Hence the charge of calcium is +2
What is an ion with a positive charge called
Answer:
An ion with a positive charge is called cations because if there's a group of atoms, a positive or negative charges :3
Explanation:
:3
3. When the water level is higher outside the flask than inside, is the gas pressure inside the flask higher, lower or the same as atmospheric pressure? (Take your time to think about this. Perhaps think of what it feels like to be 10 feet under water.)
Answer:
The gas pressure inside the flask is higher than outside the flask ornthe atmospheric pressure.
Explanation:
Given a U-tube manometer with water in between each arm of U-tube. One end is open to the atmosphere while one end is sealed to a flask filled with a gas. The water in the open end of the tube is experiencing a pressure equal to the atmospheric pressure whereas the water at the end sealed of to the flask is experiencing pressure due to the gas in the flask.
If the water level in both arms of the tube are equal, then the pressure due to the gas is equal to atmospheric pressure.
If the water level in the arm sealed to the gas is higher than that of the open end, The gas pressure is less than the atmospheric pressure.
If the water level in the arm sealed to the flask is lower than the open end, the pressure due to the gas is higher than atmospheric pressure.
From the question, when the water level is higher outside the flask than inside, then the gas pressure inside the flask is higher than the atmospheric pressure.
three examples of resistors
Answer:
fixed resistors, variable resistors, resistance dependent on a physical quantity
4. For water, H20 represents
only the empirical formula
only the molecular formula
only the structural formula
both the empirical & molecular formulas
Answer:
The empirical and molecular formula because the ratio is 2:1 and there is 2 hydrogen atoms and 1 oxygen atom.
Hope this helps!
The image shows sedimentary rock layers with index fossils and a fault.
Which statement accurately describes the rock layers?
Layer 8 is older than layer 1.
Layer 3 is younger than layer 6.
Layer 4 and layer 10 are the same relative age.
Layer 2 and layer 9 are the same relative age.
Answer:
Layer 2 and layer 9 is the same relative age since it is the same type of rock and has the same fossils.
Hope this helped!
PLEASE I NEED YOUR HELP, I WILL GIVE 10 POINTS PLEASEEEEE
People claim these rock formations in the Sahara Desert look like a mushroom and a chicken. They were not sculpted by humans. What do you think caused them to be shaped this way?
Answer:
Erosion
Explanation:
How many cubic centimeters are in the block? if the length is 1, the width is 1 and the height is 1?
Answer:
Volume = [tex]1cm^3[/tex]
Explanation:
Volume of cube = [tex]s^{3}[/tex]
Wherein,
s = length of side
Hence,
If the length of each side is 1cm,
Volume = [tex]1^3[/tex]
= 1[tex]cm^3[/tex]
2.
You take a gas at 3 atm and increase the temperature from 120 K to 240 K. What is the final pressure?
A
6 atm
B
Not enough information
C
3 atm
D
1.5 atm
Answer:
A. 6atm
Explanation:
Using pressure law equation:
P1/T1 = P2/T2
Where;
P1 = initial pressure (atm)
T1 = initial temperature (K)
P2 = final pressure (atm)
T2 = final temperature (K)
According to this question;
P1 = 3 atm
P2 = ?
T1 = 120K
T2 = 240K
Using P1/T1 = P2/T2
3/120 = P2/240
Cross multiply
240 × 3 = P2 × 120
720 = 120P2
P2 = 720/120
P2 = 6atm
How many joules of heat are needed to increase the temperature of 19.3 g
of lead from 22°C to 41°C? (Specific heat of lead = 0.128 J/g•°C ROUND
YOUR ANSWER TO A WHOLE NUMBER DO NOT FORGET UNITS q = MCT
Answer:
c i think
Explanation:
The heat is needed to increase the temperature of 19.3 g lead from 22°C to 41° C is 46.9 J or 46.9 MCT.
What is heat?Heat is defined as a form of energy related to the motion of an atom or molecules. It can also be defined as transfer of kinetic energy from one medium or object to another medium or object
Heat energy can be calculated as
q = mcΔT
ΔT = 41°C - 22°C = 19°C
So q = 19.3g x 0.128J/g °C x 19°C
= 46.9 J or 46.9 MCT
Thus, the heat is needed to increase the temperature of 19.3 g lead from 22°C to 41° C is 46.9 J or 46.9 MCT.
To learn more about heat, refer to the link below:
https://brainly.com/question/1429452
#SPJ2
Four alleles determine if a rabbit is white, brown, or gray. This is an example of *
a.)incomplete dominance
b.)polygenic inheritance
c.)multiple alleles
d.)codominance
Answer:
imcomplete dominance
Explanation:
because it is
How many atoms are there in 1.005 moles of CO2?
Answer:
[tex]6.05211\times 10^{23}\ \text{atoms}[/tex]
Explanation:
Moles of carbon dioxide = 1.005 moles
[tex]N_A[/tex] = Avogadro's number = [tex]6.022\times 10^{23}\ \text{mol}^{-1}[/tex]
Number of atoms is given by
[tex]\text{Moles}\times N_A=1.005\times 6.022\times 10^{23}[/tex]
[tex]=6.05211\times 10^{23}\ \text{atoms}[/tex]
The number of atoms in the given amount of moles of carbon dioxide is [tex]6.05211\times 10^{23}\ \text{atoms}[/tex].
How much of the world’s drinking water is provided by rivers?
A. 50%
B. 75%
C.90%
D. None of these
(Be accurate & will give brainliest if the answer is correct when I get the quiz results back.)
Calculate the heat absorbed when 68.8 g of ice at -30.0 c is converted to steam at 160 c
Answer: 219 kJ
Explanation:
How might the structure of an atom be modeled
Answer:
you can explore the structure of atoms as you add protons, neutrons, or electrons to a model and the name of the element you have created
Explanation: