A. The final temperature of the system is 0°C.
B. The amount of ice (if any) remaining is 0.0331 g
C. The initial temperature of the water that would be enough to just barely melt all of the ice is 20.57 °C.
What is specific heat?The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.
Heat lost or gained is represented as
Q = m C ΔT
Given, Mass of ice, mice = 9x10⁻² kg, Mass of water, mw =0.35 kg, T = 13 °C
A. If ice is in excess, final water temperature will be 0°C.
B. Specific heat of water Cp = 1000 cal/kg°C
Latent heat of ice L = 80 kcal/kg
In that case, heat lost by water =Heat gain by ice
Q = mCp x dT = mL
0.35 x 1000 x 13 = m x 80 x 1000
m = 0.0569 kg of ice.
The gram of ice remaining = 0.09 - 0.0569
= 0.0331 gram of ice.
Thus, the amount of ice remaining is 0.0331 g
C. Heat required to melt 90 gram of ice, Q mL
Q = 90 x 80 = 7200 cal.
If the initial temperature of water needed = T,
mCp x dT = mL
350 x T = 7200
T = 20.57 °C
Thus, the initial temperature of the water that would be enough to just barely melt all of the ice is 20.57 °C.
Learn more about specific heat.
https://brainly.com/question/11297584
#SPJ1
one of the most important features that must be explained by models during the formation of the galaxy is the ____.
One of the most important features that must be explained by models during the formation of the galaxy is the difference in age and metallicity of stars.
What is Metallicity of stars?This is defined as the proportion of heavy elements present in a star and they are usually heavier than hydrogen or helium.
These elements and the age of stars have to be put into consideration when discussing the formation of the galaxy.
Read more about Metallicity here https://brainly.com/question/13058542
#SPJ11
Two particles having charges q,=0.700nc and q=9.00nc are separated by a distance of 1.40m. at what point along the line connecting the two charges is the total electric field due to the two charges equal to zero?
The point along the line connecting the two charges is the total electric field due to the two charges equal to zero will be 0.3056.
What is electric field strength?
The electric field strength is defined as the ratio of electric force and charge. The field's direction is determined by the direction of the force acting on the positive charge.
The megnitude of the electric field for charge 1 is;
[tex]\rm E_1 = (9 \times 10^9 )\times \frac{0.700 \times 10^{-9}}{x^2}[/tex]
The megnitude of the electric field for charge 1 is;
[tex]\rm E_2 = 9.0 \times 10^9 \times \frac{9.00 \times 10^{-9}}{(1.80-x)^2}[/tex]
The net electric field at point p is;
[tex]\rm \frac{0.700}{x^2} = \frac{9.00}{(1.40-x)^2} \\\\( \frac{1.40-x}{x} )^2 = \frac{9.00}{0.700} \\\\\ \frac{1.40-x}{x}=3.58 \\\\ \frac{140}{x} -1=3.58\\\\\ \frac{140}{x}=3.58+1\\\\ x=0.3056 \ m[/tex]
Hence, the point along the line connecting the two charges is the total electric field due to the two charges equal to zero will be 0.3056.
To learn more about the electric field strength refer to the link;
https://brainly.com/question/4264413
#SPJ1
Identify each statement that describes a benefit of the scientific method. (Select all choices that apply)
Group of answer choices
a) It provides an answer to questions immediately.
b) It gives scientists a standardized way to approach a problem.
C) It gives scientists a common vocabulary for sharing information.
D) It reduces bias and judgment from personal experiences.
The statements that describe a benefit of the scientific method are as follows:
It gives scientists a standardized way to approach a problem. It reduces bias and judgment from personal experiences. It gives scientists a common vocabulary for sharing information.Thus, the correct options are B, C, and D.
What is the Scientific method?The scientific method may be defined as a strategy of research in which a problem is recognized, relevant data is collected, a conjecture is composed of this data, and the assumption is empirically tested to determine the outcome of particular research.
The scientific method never explains or provides an answer to any question immediately because it consists of a scripted format with certain parameters.
The scientific method uses the identical vocabulary for sharing information with one another in particular terminology.
Therefore, it is well described above.
To learn more about the Scientific method, refer to the link:
https://brainly.com/question/17216882
#SPJ1
A metal block has a density of 5000 kg per cubic meter and a mass of 15,000 kg. What is its volume?
Taking into account the definition of density, the volume of the metal block is 3 m³.
What is densityDensity is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.
In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance.
Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
From this expression it can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.
Volume of the metal blockIn this case, you know that:
Density= 5000 [tex]\frac{kg}{m^{3} }[/tex]Mass= 15000 kgVolume= ?Replacing in the definition of density:
[tex]5000 \frac{kg}{m^{3} } =\frac{15000 kg}{volume}[/tex]
Solving:
volume×5000 [tex]\frac{kg}{m^{3} }[/tex]= 15000 kg
volume= [tex]\frac{15000 kg}{5000 \frac{kg}{m^{3} }}[/tex]
volume= 3 m³
In summary, the volume of the metal block is 3 m³.
Learn more about density:
brainly.com/question/952755
brainly.com/question/1462554
#SPJ12
which of the following is not a lever?
a. winch
b. scissors
c. can openers
d. tweezers
Answer:
a?
Explanation:yes it is a
Determine the value of n so that the vectors A and B are perpendicular: Ā = î + 5j + nk and B = 2î - j + k
If [tex]\vec A[/tex] and [tex]\vec B[/tex] are perpendicular, then their dot product is zero. This means
[tex]\vec A \cdot \vec B = (\vec\imath + 5\,\vec\jmath + n\,\vec k) \cdot (2\,\vec\imath - \vec\jmath + \vec k) = 2 - 5 + n = 0[/tex]
Solving for n is trivial; it follows that n = 3.
3. A body accelerates constantly at 4m/s² from rest for a distance of 60m. a) How long did it take to reach a distance of 60m? [2] b) Calculate the velocity reached.
Answer:
will you mark brainliest.
what determines the velocity of an object
What observation method exposes people to frustrations, temptations, pressure, and boredom in a controlled environment, and is used for firearms training in police departments?
Virtual reality is the observation method that exposes people to frustrations, temptations, pressure, and boredom in a controlled environment, and is used for firearms training in police departments.
What is virtual reality?Virtual reality is an observation technique that is utilized in police agencies for weapons training. It exposes individuals to frustrations, temptations, pressure, and boredom in a controlled setting.
Police officers' psychophysiological reactions are impacted when participating in virtual reality weapons training exercises.
Electroencephalographic (EEG) and heart rate variability (HRV) measurements, as well as VR simulator performance metrics, are used as outcome measures.
In order to facilitate the design of a biocybernetic adaption layer that generates real-time modulations in simulation difficulty based on specific physiological responses, we propose a psychophysiological model.
Hence, virtual reality is the observation method that exposes people.
To learn more about the virtual reality refer;
https://brainly.com/question/13269501
#SPJ1
what evidence would you expect to find on the moon if it had been subjected to plate tectonics? (select all that apply.)
Volcanoes and mountains are the evidences that show plate tectonics.
What evidence would you expect to find on the Moon if the Moon had been subjected to plate tectonics?The presence of volcanos and mountains are the evidences that provides information that the moon has plate tectonic. If there is no volcanoes and mountains on the moon then we can say that there is no plate tectonic on the moon.
So we can conclude that volcanoes and mountains are the evidences that show plate tectonics.
Learn more about tectonics here: https://brainly.com/question/2325633
#SPJ11
Which of these is most likely consequence of failing petroleum prices
More sales of traditional, large cars are the most likely consequence of falling petroleum prices.
ExplanationSince the majority of conventional, large cars employ combustion engines, these engines need petroleum fuel to operate.
As a result, Choice C—more sales of conventional, large cars—is one of the effects of dropping oil prices that is most likely to occur.
Learn more about petroleum here https://brainly.com/question/21518946
#SPJ10
ubes have sides of equal lengths. What is the fastest way to measure the volume of a cube-shaped table?
measure the length, width, and height of the table, then multiply those numbers
measure one side with a ruler, and multiply that number by itself three times
measure one side with a ruler, and multiply that number by itself and then by
measure the length, width, and height of the table, then multiply those numbers by
The quickest technique to calculate the volume of a cube-shaped table is to use a ruler to measure one side, then multiply that figure by three. Option B is correct.
How do you calculate the volume of a cube?Assume the side length of the cube under consideration is L units. The volume of the cube is then equal to L³ cubic units.
The volume of a cube is;
V = L³
Ubes have equal-length sides. The quickest technique to calculate the volume of a cube-shaped table is to use a ruler to measure one side, then multiply that figure by three.
Hence option B is correct.
To learn more about the volume of a cube refer
https://brainly.com/question/26136041
#SPJ1
c) Use the table to explain how the masses of Objects 1 and 2 relate to the gravitational force
between them. Be sure to:
Describe the scenario.
DExplain the table headings to introduce the data in the table.
Use the data to show a trend.
Summarize the information from the table in a sentence, showing the relationship between
the masses of objects and the gravitational force between the objects.
Use the table to explain how the masses of Objects 1 and 2 relate to the gravitational force between them the power of the gravitational pressure among gadgets relies upon on factors, mass and distance. the pressure of gravity the loads exert on every other.
How do the loads of items 1 and a couple of relate to the gravitational pressure among them?Gravitational pressure -an appealing pressure that exists among all items with mass; an item with mass draws every other item with mass; the value of the pressure is immediately proportional to the loads of the 2 items and inversely proportional to the rectangular of the gap among the 2 items.
Since the gravitational pressure is immediately proportional to the mass of each interacting items, greater large items will entice every different with a more gravitational pressure. So because the mass of both item increases, the pressure of gravitational appeal among them additionally increases.
Read more about the objects:
https://brainly.com/question/25573309
#SPJ1
which statement is a scientific theory
A.most cells are so small that they can be observed only through a microscope
B.the interactions between cells can be predicted with mathematical equations
C.The various functions of different types of cells can be determined by experiments
D.cells are fundamental units of all living organisms
Most cells are so small that they can be observed only through a microscope is a scientific theory. Option A is correct.
What is a scientific theory?A well-considered explanation for observations of the natural world that has been developed through the scientific method and that combines numerous facts and hypotheses is known as a theory.
A scientific hypothesis states that most cells are so tiny that a microscope is the only way to see them.
Hence option A is correct.
To learn more about the scientific theory refer;
https://brainly.com/question/2375277
#SPJ1
You launch a model rocket that has a mass of 1.5 kg.At a height of 300m,it is traveling at 125 m/s.what is the kinetic energy at this point
Answer:
zero
Explanation:
Because if the object is not in motion then it only posseses potential energy not kinetic energy
Hi,i need this hurry and correctly please!!!,fake answers i report you.Thanks.
Step-by-step explanation:
Step 1: Formula
10.0 = Meters
800 = Newtons
4.0 = Centre of Gravity
Explanation in words (Short Form)
- We know all the formulas and that we are calculating the least force being applied. We know that balancing the pole at (A) with the weight of the gravity will equal more force at B times 10. So the answer will be 320 N because the B force will equal 3200. If we divide 3200 by 10. The answer will result as 320. So the final answer for this question is 320N
Answer:
Balancing the pole at A with the weight acting at the centre of gravity = 800(4) Force at B multiplied by 10 = 3200 divided by 10 equals 320N
= 320N
Hope this helps.
Different between
atmospheric presure and liquid
pressure
Explanation:
An atmosphere (atm) is a unit of measurement equal to the average air pressure at sea level but liquid pressure is exerted on the surface of an object in a liquid.
And they also differ in formulas. We can calculate atmospheric pressure in two ways. First we can get the atmospheric pressure by an instrument called barometer. And the second one is by usin this formula, atmospheric pressure = density of mercury x acceleration due to gravity x height of column of mercury. But this equation will only work if the atmospheric pressure is being measured by mercury.
But the formula for liquid pressure is defferent and the instrument used to measure the liquid pressure is also defferent.
The instrument used to measure the liquid pressure is pressure gauge. And the formula for the liquid pressure is density x height x gravity. Please give me a like and thank me.
please.
What chemical is needed to produce energy and where is it stored?.
Answer:
chemical energy, Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic
Explanation:
hope it will help you
the magnitude of the electric potintial and of the electrolstatic force depend on which two factors
answer:
Distance and amount of charge
also:
size, type
Electrostatic force F=k Q q / r^2
It depends on
1. Charge on which force is acting.
2. Charge due to which force is acting
3. Distance between the two charges.
4. Material medium in which the charges are placed (eg air, water, oil etc)
https://brainly.com/question/3379651
quora
maitri goel
We see different phases of the Moon on Earth. How are the phases of the Moon proof of
the way we see the Moon?
Answer:
The Moon itself does not generate light
Explanation:
The Moon itself does not generate light; it is lit up by the Sun. As the Moon orbits the Earth, the portion of illuminated Moon that we see changes – giving rise to the phases of the Moon. Starting at the New Moon phase, the Moon appears to expand in illumination.
Particles q1, 92, and q3 are in a straight line.
Particles q1 = -5.00 x 10-6 C,q2 = -5.00 x 10-6 C,
and q3 = -5.00 x 10-6 C. Particles q₁ and q2 are
separated by 0.500 m. Particles q2 and q3 are
separated by 0.500 m. What is net force on 93?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-5.00 x 10-6 C
91
0.500 m-
-5.00 x 10-6 C
92
-5.00 x 10-6 C
93
0.500 m-
The answer to the question is 1.125 Newton
Formula for electrostatic force is F = ( K q1 q2 )/ r²
where q1 and q2 represent the charges and r represents the distance between them and the value of K is 9 × 10⁹.
Total net force on q3 will be the summation of electrostatic force between q1 and q3 and electrostatic force between q2 and q3, as all the three charges are of same sign and lie in the same line.
Electrostatic force between q1 and q3
r will be 0.500 + 0.500 = 1 m
F = ( K q1 q3 )/ r²
F = ( (9 × 10⁹ ) x (5.00 x 10⁻⁶) x (5.00 x 10⁻⁶) )/ 1²
F₁₃ = 2.25 × 10⁻¹ N
Electrostatic force between q2 and q3
r will be 0.500 m
F = ( K q1 q3 )/ r²
F = ( (9 × 10⁹ ) x (5.00 x 10⁻⁶) x (5.00 x 10⁻⁶) )/ 0.5²
F = (225 × 10⁻³) / (25 × 10⁻²)
F₂₃ = 9 × 10⁻¹ N
Total force on q3 will be F₁₃ + F₂₃
Total force on q3 = ( 2.25 × 10⁻¹ ) + (9 × 10⁻¹ ) N
Total force on q3 = ( 2.25 × 10⁻¹ ) + (9 × 10⁻¹ ) N
Total force on q3 = ( 11.25 × 10⁻¹ ) N
Total force on q3 = 1.125 N
Thus after solving we got the net force on q3 as 1.125 Newton
Learn more about Electrostatic Force here:
brainly.com/question/23121845
#SPJ10
A transverse wave that has electrical and magnetic properties is known as _________.
a. magnetism
b. loudness
c. electricity
d. electromagnetic energy
Answer:
D
Explanation:
the answer is D to me
the answer is D to me
The speed of light is a constant and approximately equal to 300,000,000 meters per second.
Green lasers emit light at a wavelength of 532 nm. However, the material that is used to make most green lasers does not emit light at 532 nm. Instead, it emits light at a different wavelength, and the laser then uses a “frequency doubler.” This doubles the frequency of the emitted light, and the resultant light is the green 532 nm that we observe.
1 meter is equal to 1,000,000,000 nanometers.
What is the output light frequency of the material used before doubling?
The material used before doubling will produce light at a frequency of 0.056 Hz.
What is the frequency?The number of times a wave occurs repeatedly in a second is known as frequency.
The formula provides the frequency as,
[tex]\rm v = \lambda \times f \\\\\ \rm f = \frac{v}{\lambda} \\\\ \rm f = \frac{3 \times 10^8}{532 \times 10^-9} \\\\ \rm f = 3 \times 10^{12} \\\\ f= 0.056 \ Hz[/tex]
Therefore, the material used before doubling will have an output light frequency of 0.056 Hz.
To learn more about the frequency refer to:
https://brainly.com/question/14926605
#SPJ1
The phenomenon of water sticking to a surface, such as a window pane or
plant, is due to the water's____. A. cohesion
B. corrosion
C. obtrusion
D. adhesion
Answer:
Because of the Cohesion
If a sound increases 5 db, the sound becomes _______ times louder.
a. five
b. ten
c. three
d. fifteen
Answer:
If a sound increases 5 db, the sound becomes three times louder.
Explanation:
Explain why it is more difficult to balance a nail on its tip than on its base.
note:please dont answer according to presuure concepts,answer according to equilibrium concepts.thanks.
It is much easier to balance a thing that has a large base of support and a low center of gravity. The object won't topple over as a result of little center of gravity wobble because of the wide base and low center of gravity. Therefore, balancing a nail on its base as opposed to its tip would be simpler.
A 50-kg block is at rest on a 15o slope. A force of 250 N is acting on the block up the slope parallel to it. If the block does not slide up the slope, what is the minimum value of the coefficient of static friction between the block and the slope
The minimum value of the coefficient of static friction between the block and the slope is 0.53.
Minimum coefficient of static frictionApply Newton's second law of motion;
F - μFs = 0
μFs = F
where;
μ is coefficient of static frictionFs is frictional forceF is applied forceμ = F/Fs
μ = F/(mgcosθ)
μ = (250)/(50 x 9.8 x cos15)
μ = 0.53
Thus, the minimum value of the coefficient of static friction between the block and the slope is 0.53.
Learn more about coefficient of friction here: https://brainly.com/question/20241845
#SPJ1
Please help me do that.
Answer:
a) 22.2 N
Explanation:
To find load effort. Identify load, efficiency and velocity ratio (VR)
Here given:
Load = 100 NEfficiency = 75%VR (number of pulleys) = 6Effort :
[tex]\rightarrow \sf \dfrac{MA}{VR} = \dfrac{Load \ \div \ efficiency }{VR} = \dfrac{100 \div 75 \% }{6} = 22.22 \ N[/tex]
compared to other spiral galaxies, the milky way is ____.
The Milky Way, a member of the "Local Group," is different than other galaxies in the universe. First, it is brighter than most galaxies that we have been able to see. Second, the Milky Way is a barred spiral galaxy; unlike typical spiral galaxies, barred spiral galaxies have flat discs in their centers.
Answer:
The Milky Way Galaxy, is a spiral galaxy, meaning that there are multiple arms spiraling in toward the middle of the galaxy. Are there any other galaxies in the universe shaped like the Milky Way Galaxy?
What is the degree measure of angle bac? round to the nearest whole degree. 19° 20° 70° 71°
The degree measure of angle ∠ bac will be 70°. Option C is correct.
What exactly is an angle?The angle is the distance between the intersecting lines or surfaces. In addition, the angle is expressed in degrees. The angle is 360 degrees for a full revolution.
Given expression;
[tex]\rm cos^{-1}(\frac{3.4}{10})=x \\\\ x = cos^{-1}(0.34) \\\\ x = 70.12^0[/tex]
The degree measure of angle ∠bac will be 70°.
Hence option C is correct.
To learn more about the angle, refer to
https://brainly.com/question/15767203.
#SPJ1
Answer:
70 Degrees
Explanation:
Geometry B E2020!! :3