A 65 L gas cylinder containing gas at a pressure of 3. 6 x10^3 kPa and a temperature of 10°C springs a leak in a room at SATP. If the room has a volume of 108 m^3, will the gas displace all of the air in the room? ( 1m3 = 1000 L)

7.65 moles of gas at STP would occupy a volume of approximately 171.36 liters.

To find out how many liters are in 7.65 moles of a gas, you will need to use the Ideal Gas Law equation, which is:

PV = nRT

In this equation:
P = pressure of the gas
V = volume of the gas in liters
n = number of moles of the gas
R = ideal gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin

However, since we are not given the values for pressure (P) and temperature (T), we cannot calculate the exact volume (V) in liters for 7.65 moles of a gas.

If we assume standard temperature and pressure (STP) conditions, which are 0°C (273.15 K) and 1 atm, we can use the molar volume of a gas at STP, which is 22.4 liters/mol.

To calculate the volume in liters at STP, you can use the following formula:

V = n × molar volume at STP

Now, plug in the values:

V = 7.65 moles × 22.4 liters/mol

V ≈ 171.36 liters

So, under STP conditions, 7.65 moles of gas would be approximately 171.36 liters.

Learn more about moles at https://brainly.com/question/29367909

#SPJ11

The amount of electrical energy (in kWh) needed to produce 1 kWh of electrical energy is 1 kWh or 3.6E6 J. The actual amount of energy needed may vary depending on the efficiency of the power generation system used.

A kilowatt-hour is a unit of energy commonly used by electric companies to measure the amount of energy consumed by households or businesses over a period of time. One kilowatt-hour (kWh) is equal to the amount of energy consumed by a 1,000 watt appliance for one hour.
We know that 1 kWh is equal to 3.6E6 J (joules). This means that to produce 1 kWh of electrical energy, we need to generate 3.6E6 J of energy.

In practical terms, the amount of electrical energy needed to produce 1 kWh depends on the efficiency of the power generation system. For example, a coal-fired power plant may require more energy input (e.g. coal) to generate 1 kWh of electrical energy compared to a renewable energy source such as solar or wind power.

For more such questions on electrical energy

https://brainly.com/question/10294808

#SPJ11

The term that names the result of two or more atoms combining chemically is a molecule.

A molecule is formed when two or more atoms combine chemically by sharing electrons in a covalent bond.

This bonding occurs when atoms have unpaired electrons in their outermost shell, and they share these electrons to complete their valence shells. In a covalent bond, the electrons are shared between atoms, rather than being transferred, as in an ionic bond.

Molecules can be formed between atoms of the same element or different elements, depending on the chemical properties of the atoms.

For example, two oxygen atoms can combine to form an oxygen molecule (O2), while a hydrogen atom can combine with an oxygen atom to form a water molecule (H2O).

Molecules are the building blocks of all substances in the universe. They are responsible for the chemical and physical properties of substances, such as their melting and boiling points, solubility, and reactivity.

Understanding the formation and behavior of molecules is essential for understanding chemistry and the world around us.

To know more about molecule refer to-

https://brainly.com/question/19922822

#SPJ11

Protein is the main nutrient that helps in the repair of tissue. Protein provides the amino acids that the body needs to build and repair cells and tissues. Other nutrients that aid in tissue repair include carbohydrates, fats, vitamins, and minerals.

Answer: H2O2

Explanation: The formula that represents hydrogen peroxide is H2O2

There could be several reasons why a student produced less magnesium oxide than expected. Here are two possibilities: Incomplete reaction,  Loss of product

Incomplete reaction: Magnesium oxide is produced when magnesium metal is heated in the presence of oxygen. However, if the reaction is incomplete, then less magnesium oxide will be produced. One reason for incomplete reaction could be that the temperature was not high enough to provide the necessary activation energy.

Loss of product: It is possible that some of the magnesium oxide that was produced was lost during the experiment. For example, if the magnesium oxide was not handled carefully after it was produced, it may have been spilled or blown away.

To know more about Incomplete reaction, here

brainly.com/question/14335621

#SPJ4

The appropriate term for the following mixtures are;

A mixture is a substance made when two or more substances are combined, but they are not combined chemically.

The components of a mixture can be easily separated because each component keep their original properties or identity.

A homogenous mixture is a gaseous, liquid or solid mixture that has the same proportions of its components throughout a given sample e.g. juice while heterogenous mixture is a mixture in which the composition is not uniform throughout the mixture e.g. smoke.

Learn more money mixtures at: https://brainly.com/question/30587533

#SPJ1

Answer:

Its in my screenshot

Explanation:

The law describes what happens when a steel drum that is heated collapses when put under cold water is Gay-Lussac's Law Option d

Gay-Lussac's Law, is called the Law of Combining Volumes.

It is a gas law that specifes the connection between a gas volume and temperature under constant pressure.

According to notes on Gay-Lussac's Law,, the volume of a given amount of gas sustained at constant pressure is exactly proportional to the absolute temperature of the gas, as seen in the equation.

Find more exercises on Gay-Lussac's Law ;

https://brainly.com/question/1358307

#SPJ1

The term mole concept is used here to determine the number of grams of sucrose. The mole concept is a convenient method to express the amount of the substance. The grams of sucrose is  1509.5 g.

One mole of a substance is that amount of it which contains as many particles or entities as there are atoms in exactly 12 g of carbon 12. The equation used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

1. Mass = 4.41 × 342.3 = 1509.5 g

2. Moles = 350 / 105.98 = 3.302

3. Mass = 7.38 × 36.45 = 269.001 g

To know more about mole concept, visit;

https://brainly.com/question/30307377

#SPJ1

Answer:

Activation Energy

Explanation:

I know you dont need this

The pOH of the 3.14x10^-5 M solution is approximately 9.50 (rounded to 2 decimal places).

To calculate the pOH of a 3.14x10^-5 M solution, first find the pH using the formula:

pH = -log10[H+]

Where [H+] represents the concentration of hydrogen ions in the solution. In this case, the concentration is 3.14x10^-5 M. Then, calculate the pOH using the relationship between pH and pOH:

pH + pOH = 14

First, find the pH:

pH = -log10(3.14x10^-5) ≈ 4.50

Now, calculate the pOH:

pOH = 14 - pH = 14 - 4.50 ≈ 9.50

So, the pOH of the 3.14x10^-5 M solution is approximately 9.50 (rounded to 2 decimal places).

Know more about pOH here:

https://brainly.com/question/480457

#SPJ11

The number of moles of the HCl that can be made from the 6.15 mol H₂ and the excess of the Cl₂ is 12.3 mol.

The balanced chemical equation is :

H₂  + Cl₂   --->  2HCl

The number of moles of H₂ = 6.15 mol

The number of moles of any substance = mass / molar mass

The 1 mole of H₂ produces the 2 moles of HCl

The molar ratio in between the H₂  and the HCl is 1 : 2

The number of moles of HCl = 2 × 6.15 mol

The number of moles of HCl = 12.3 mol

Therefore, the total number of moles of HCl produces in the reaction is 12.3 moles.

To learn more about moles here

https://brainly.com/question/31597231

#SPJ1

Part 1: This diagram depicts an endothermic reaction. Because the products have a higher potential energy than the reactants, energy is absorbed during the reaction.

Furthermore, the energy level of the products is greater than the reaction's activation energy, showing that energy must be given to the system for the reaction to occur.

Part 2: To calculate the total enthalpy change (H) from the diagram, subtract the energy of the reactants from the energy of the products. Because the energy of the products is greater than the energy of the reactants in an endothermic reaction, H will be positive.

To calculate the activation energy (Ea) from the diagram, subtract the energy of the reactants from the energy of the transition state. The activation energy is the smallest amount of energy required for the reaction to occur, hence it is the difference in energy between the reactants and the highest point on the diagram.

Ea will be positive in this situation because energy must be added to the system to achieve the transition state.

learn more about enthalpy here

https://brainly.com/question/14047927

#SPJ1

When discussing a job agency and its reliability, a conversation between friends may touch on several aspects of the agency's services. They might consider the agency's reputation within the industry, the quality of the jobs the agency offers, and the level of support they provide to job seekers.

The agency's reputation, screening process, communication, and track record, the conversation might also touch on other factors that can affect an agency's reliability. These may include the types of industries and job roles the agency specializes in, the geographic region it serves and the fees it charges for its services.

If the agency primarily focuses on entry-level jobs or temporary positions, it may not be the best fit for job seekers looking for long-term career growth. If the agency only operates in a specific region or industry, it may not be able to offer the same level of job opportunities as larger agencies with a broader reach.

To learn more about agency follow the link:

https://brainly.com/question/15129864

#SPJ4

The specific heat in J/(g·ºC) of an unknown substance if a 2. 50-g sample releases 12. 0 cal as its temperature changes from 25. 0ºC to 20. 0ºC. 2.02  J/(g·ºC).

The specific heat of the unknown substance can be calculated using the formula:
q = m x c x ΔT

where q is the heat released, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.

First, we need to convert the given heat release from calories to joules:
12.0 cal x 4.184 J/cal = 50.208 J

Next, we can plug in the given values and solve for c:
50.208 J = 2.50 g x c x (25.0°C - 20.0°C)
c = 2.02 J/(g·°C)


To know more about specific heat click on below link:

https://brainly.com/question/11297584#

#SPJ11

When a 3.00 g mass of compound X is added to 50.0 g of water, a new mixture is formed. This mixture is a combination of two substances, the compound X and water. A compound is a substance formed when two or more different elements combine chemically in a fixed ratio. In this case, compound X is the result of the combination of two or more elements.

The addition of compound X to water results in the formation of a solution. A solution is a homogeneous mixture of two or more substances, in which the components are uniformly distributed. The compound X dissolves in the water to form a homogeneous mixture.

The mass of the resulting mixture is the sum of the mass of compound X and the mass of water. Therefore, the mass of the resulting mixture is 53.00 g (3.00 g + 50.00 g).

Water is a common solvent for many compounds, including compound X. Water molecules have a polar nature, which enables them to dissolve polar and ionic compounds, such as salts and acids. The dissolution of compound X in water is a result of the polar nature of water molecules.

In summary, the addition of a 3.00 g mass of compound X to 50.00 g of water results in the formation of a homogeneous mixture. The resulting mixture has a mass of 53.00 g, which is the sum of the mass of compound X and the mass of water. Water is a common solvent for many compounds, including compound X, and its polar nature enables it to dissolve many polar and ionic compounds.

To know more about  compound refer here

https://brainly.com/question/13516179#

#SPJ11

The heat that is released by 4.5 moles of methane gas is 4005 kJ.

The chemical reaction of combustion involves the breaking of chemical bonds in the fuel molecules, followed by the recombination of atoms with oxygen to form new molecules such as carbon dioxide, water vapor, and other combustion products.

We know that the balanced reaction equation have been shown in the image that is attached here.

As such we have that;

1 mole of methane gas produces 890 kJ of heat

4.5 moles of methane gas would produce 4.5 * 890/1

= 4005 kJ

Learn more about combustion:https://brainly.com/question/15117038

#SPJ1

The mass in grams of 0.30 mol of NaHCO3 can be calculated using the molar mass of NaHCO3, which is 84.01 g/mol.

To do this, we simply multiply the number of moles by the molar mass. Therefore:

Mass in grams = Number of moles x Molar mass
Mass in grams = 0.30 mol x 84.01 g/mol
Mass in grams = 25.203 g

Therefore, the mass in grams of 0.30 mol of NaHCO3 is 25.203 g.

We first need to understand the concept of molar mass. Molar mass is defined as the mass of one mole of a substance and is expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms present in a molecule.

In the case of NaHCO3, the molar mass is calculated by adding the atomic masses of sodium (Na), hydrogen (H), carbon (C), and oxygen (O), which gives us a total of 84.01 g/mol.

When we are given the number of moles of a substance, we can easily convert it to its mass in grams using the formula Mass in grams = Number of moles x Molar mass. This formula helps us to convert the amount of a substance in moles to its corresponding mass in grams.

In conclusion, the mass in grams of 0.30 mol of NaHCO3 is 25.203 g. This calculation was done by multiplying the number of moles of NaHCO3 by its molar mass. Molar mass is a key concept in chemistry, and it allows us to convert between the number of moles of a substance and its mass in grams.

To know more about molar mass, visit:

https://brainly.com/question/22997914#

#SPJ11

The standard entropy change for the reaction [tex]2Mg(s)+O_2(g)\rightarrow 2MgO(s)[/tex] is -405.6 J/(K⋅mol).

Entropy is a measure of the randomness or disorder in a system. It is a thermodynamic property that can be used to measure the amount of energy that is unavailable for work in a thermodynamic process. Entropy is closely related to the second law of thermodynamics and can be used to assess the direction of a thermodynamic process. Entropy is also a measure of the amount of information contained in a system. High entropy systems have more randomness and disorder, while low entropy systems have less.

The entropy change for the reaction [tex]2Mg(s)+O_2(g) \rightarrow 2MgO(s)[/tex] is calculated using the following equation: [tex]\Delta S^\circ = \Sigma S^\circ products -\Sigma S^\circ reactants[/tex]

Substituting the values from the table:

[tex]\Delta S^\circ = (2 \times 27.00 J/(Kmol)) - (32.70 J/(Kmol) + 205.0 J/(Kmol))\\\Delta S^\circ = -405.6 J/(Kmol) .[/tex]

To learn more about entropy

https://brainly.com/question/419265

#SPJ4

The unknown gas is likely methane. The unknown gas leaks out of a container in 21.2 minutes, while Neon leaks out in 15.0 minutes under identical conditions.

To identify the unknown gas, we can use Graham's law of effusion. This law states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass. Mathematically, this can be expressed as:

Rate1 / Rate2 = √(M2 / M1)

In this case, Rate1 is the rate of effusion of Neon, and Rate2 is the rate of effusion of the unknown gas. M1 is the molar mass of Neon, and M2 is the molar mass of the unknown gas.

First, let's find the ratio of the rates of effusion:

Rate1 / Rate2 = 15.0 minutes / 21.2 minutes = 0.7075

Next, we'll substitute this ratio and the molar mass of Neon (20.18 g/mol) into Graham's law equation:

0.7075 = √(M2 / 20.18)

Now, square both sides of the equation:

0.5006 = M2 / 20.18

Finally, solve for M2 (the molar mass of the unknown gas):

M2 = 0.5006 * 20.18 = 10.10 g/mol

The unknown gas has a molar mass of approximately 10.10 g/mol, which closely matches the molar mass of methane (CH4) at 16.04 g/mol. Therefore, the unknown gas is likely methane.

To know more about methane, visit:

https://brainly.com/question/2127750#

#SPJ11

Katja is using different colors of paper in her experiment to test her hypothesis that the black sheet of paper will increase the most in temperature when exposed to white light.

Each color of paper will absorb different wavelengths of light, and the amount of energy absorbed will depend on the color of the paper. Black paper will absorb all wavelengths of light and therefore absorb the most energy, leading to an increase in temperature.

On the other hand, white paper will reflect all wavelengths of light and absorb the least amount of energy, leading to a smaller increase in temperature compared to black paper.

By testing multiple colors of paper, Katja can compare the temperature increases of each color and determine which color absorbs the most energy and which absorbs the least. This will provide her with more data to support her hypothesis and better understand the relationship between color and the absorption of energy from light.

To know more about wavelengths of light, refer here:

https://brainly.com/question/31326088#

#SPJ11

The pressure inside the flattened can is 1000 kPₐ .

To solve this problem using the Ideal Gas Law formula and the given information. The terms involved in this question are pressure, volume, and the Ideal Gas Law (PV = nRT).

Here's the step-by-step explanation:
1. The initial state of the gas is given as: P₁ = 20.0 kPₐ and V₁ = 0.50 L.
2. The final state of the gas after being flattened is given as: V₂ = 0.010 L.
3. We need to find the final pressure, P₂.
4. Since the problem doesn't involve any changes in temperature or the amount of gas, we can use Boyle's Law, which is a simplified version of the Ideal Gas Law for constant temperature and amount of gas. Boyle's Law states that P₁V₁ = P₂V₂.
5. Plug in the given values: (20.0 kPₐ)(0.50 L) = P2(0.010 L).
6. Solve for P₂: P₂ = (20.0 kPₐ )(0.50 L) / 0.010 L = 1000 kPₐ .

The pressure inside the flattened can is 1000 kPₐ .

To know more about Ideal Gas Law:

https://brainly.com/question/30458409

#SPJ11

The new volume of the gas, assuming constant temperature and a change in pressure from 760 torr to 730 torr, is 2.09 L.

Using the Boyle's Law equation,

P₁V₁ = P₂V₂,

where P is pressure and V is volume, we can solve for V₂ by plugging in the given values in the equation:

(760 torr)(2.00 L) = (730 torr)(V₂)

Solving for V₂, we get:

V₂ = (760 torr)(2.00 L) / (730 torr) = 2.09 L

Therefore, the new volume of the gas is 2.09 L.

This result makes sense because according to Boyle's Law, as pressure decreases, volume increases proportionally, assuming a constant temperature.

To know more about Boyle's Law, refer here:

https://brainly.com/question/21184611#

#SPJ11

Answer: C. Gas

Explanation:

A gas is a state of matter that has no definite shape or volume, and its particles are usually far apart and moving quickly in random directions.

The percent yield for the given reaction is 85.29%.

The percent yield for this reaction can be calculated using the formula:

percent yield = (actual yield / theoretical yield) x 100

The theoretical yield can be calculated based on the stoichiometry of the reaction. From the equation given, we know that 1 mole of (E)-stilbene reacts with 1 mole of pyridinium bromide perbromide to produce 1 mole of meso-stilbene dibromide.

First, let's calculate the number of moles of (E)-stilbene:

213 mg (E)-stilbene x 1 g/1000 mg x 1 mol/180.25 g = 0.00118 mol (E)-stilbene

Next, let's calculate the number of moles of pyridinium bromide perbromide:

435 mg pyridinium bromide perbromide x 1 g/1000 mg x 1 mol/319.82 g = 0.00136 mol pyridinium bromide perbromide

Since the stoichiometry is 1:1, the number of moles of meso-stilbene dibromide produced is also 0.00118 mol.

Finally, let's calculate the theoretical yield in grams:

theoretical yield = 0.00118 mol x 340.05 g/mol = 0.401 g

Now we can calculate the percent yield:

percent yield = (0.342 mg / 0.401 g) x 100 = 85.29%

Therefore, the percent yield for this reaction is 85.29%.

Learn more about percent yield at https://brainly.com/question/14714924

#SPJ11

The heat energy transferred to the copper can be calculated using the formula:

Q = m × c × ΔT

where Q is the heat energy transferred, m is the mass of the copper, c is the specific heat capacity of copper, and ΔT is the change in temperature.

Substituting the given values:

m = 2.3 g

c = 0.385 J/g·°C

ΔT = 174.0°C - 23.0°C = 151.0°C

Q = 2.3 g × 0.385 J/g·°C × 151.0°C = 131.38 J

Therefore, the heat energy transferred to 2.3 g of copper is 131.38 J.

To know more about transferred refer here

https://brainly.com/question/31945253#

#SPJ11

Explanation:

A) To calculate the molarity of sodium chloride solution, we need to first convert the mass of sodium chloride into moles, using its molar mass of 58.44 g/mol:

100.0 g NaCl × (1 mol NaCl/58.44 g NaCl) = 1.71 mol NaCl

Then, we divide the number of moles by the volume of solution in liters to get the molarity:

Molarity = 1.71 mol NaCl ÷ 3.0 L = 0.57 M

Therefore, the molarity of the sodium chloride solution is 0.57 M.

B) To calculate the molarity of sugar (C12H22O11) solution, we need to first convert the mass of sugar into moles, using its molar mass of 342.3 g/mol:

72.5 g C12H22O11 × (1 mol C12H22O11/342.3 g C12H22O11) = 0.212 mol C12H22O11

Then, we divide the number of moles by the volume of solution in liters to get the molarity:

Molarity = 0.212 mol C12H22O11 ÷ 1.5 L = 0.13 M

Therefore, the molarity of the sugar solution is 0.13 M.

C) To calculate the molarity of aluminum sulfate solution, we need to first convert the mass of aluminum sulfate into moles, using its molar mass of 342.2 g/mol:

125 g Al2(SO4)3 × (1 mol Al2(SO4)3/342.2 g Al2(SO4)3) = 0.365 mol Al2(SO4)3

Then, we divide the number of moles by the volume of solution in liters to get the molarity:

Molarity = 0.365 mol Al2(SO4)3 ÷ 0.150 L = 2.43 M

Therefore, the molarity of the aluminum sulfate solution is 2.43 M.

D) To calculate the molarity of caffeine (C8H10N4O2) solution, we need to first convert the mass of caffeine into moles, using its molar mass of 194.2 g/mol:

1.75 g C8H10N4O2 × (1 mol C8H10N4O2/194.2 g C8H10N4O2) = 0.009 mol C8H10N4O2

Then, we divide the number of moles by the volume of solution in liters to get the molarity:

Molarity = 0.009 mol C8H10N4O2 ÷ 0.200 L = 0.045 M

Therefore, the molarity of the caffeine solution is 0.045 M

Answer:

Hi and sorry.

But what is the question in that?

There is already answers so i don't know how to help you.

Explanation:

The boiling point of the solution is 80.58 °C, which is prepared by dissolving 2. 50 g of biphenyl (C₁₂ H₁₀).

To determine the boiling point of the solution, we need to use the equation;

Δ[tex]T_b}[/tex] = [tex]K_{b}[/tex] x m

Where ΔTb is boiling point elevation, is molal boiling point elevation constant, and m is molality of the solution.

First, we to calculate the molality of the solution;

moles of biphenyl =2.50 g / 154 g/mol

= 0.0162 mol

mass of benzene = 85.0 g

moles of benzene = 85.0 g / 78.11 g/mol

= 1.088 mol

molality = moles of solute/mass of solvent (in kg)

molality = 0.0162 mol / 0.085 kg

= 0.19 mol/kg

Next, we need to look up the molal boiling point elevation constant ([tex]K_{b}[/tex]) for benzene. The value of [tex]K_{b}[/tex] for benzene is 2.53 °C/m.

Finally, we alculate the boiling point elevation;

Δ[tex]T_b}[/tex] = [tex]K_{b}[/tex] x m

Δ[tex]T_b}[/tex] = 2.53 °C/m x 0.19 mol/kg

= 0.481 °C

The boiling point elevation (Δ[tex]T_b}[/tex]) is the difference between the boiling point of the solution and the boiling point of the pure solvent. The boiling point of pure benzene is 80.1 °C. Therefore, the boiling point of the solution will be;

Boiling point of solution = 80.1 °C + 0.481 °C

= 80.58 °C

So, the boiling point of the solution is 80.58 °C.

To know more about boiling point here

https://brainly.com/question/25777663

#SPJ4