A 1.0-g string that is 0.64 m long is fixed at both ends and is under tension. This string produces a 100-Hz tone when it vibrates in the third harmonic. The speed of sound in air is 344 m/s. The tension in the string is closest to
The tension in the given string of 1.0 g and length of 0.64 m is closest to 2.84 N
Tension in the string
The tension in the string at nth harmonic is calculated as follows;
[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }[/tex]
where;
n th harmonic = 3L is length of the string = 0.64 mμ is mass per unit length = (1 x 10⁻³ kg)/(0.64 m) = 0.00156 kg/mf is frequency = 100 HzT is tension in the string = ?[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }\\\\\frac{f_n(2l)}{n} = \sqrt{\frac{T}{\mu} }\\\\\frac{f_n^2(4l^2)}{n^2} = \frac{T}{\mu} \\\\T = \mu (\frac{f_n^2(4l^2)}{n^2})\\\\T = 0.00156(\frac{100^2 \times 4\times 0.64^2}{3^2} )\\\\T = 2.84 \ N[/tex]
Learn more about tension in string here: https://brainly.com/question/24994188
#SPJ1
What is the kinetic energy of a 12 kg ball moving at a speed of 15 m/s?
Answer:
1350 N
Explanation:
KE = ½mv²
KE = ½(12)(15²)
KE = 1350 N
3. State Newton's first and second laws of equation. A. A body of mass 2kg move vertically upwards has its velocity increased uniformly from 15m/s to 45m/s in 5s. neglecting air resistance, the upward vertical force acting on the body. [g=10ms 2] B. The velocity ratio and efficiency of pulley are 8 and 85% respectively. How much effort is required to lift a load of 120kg with this system [g=10m/s²]
Answer:
See below.
Explanation:
Newton's First Law
A body at rest persists in its state of rest, and a body in motion remains in constant motion along a straight line unless acted upon by an external force.
Newton's Second Law
A body's acceleration is directly proportional to the force exerted on it and is in the same direction as the force. F=mA (Force = Mass x Acceleration)
==============================================
A. A body of mass 2kg move vertically upwards has its velocity increased uniformly from 15m/s to 45m/s in 5s. neglecting air resistance, the upward vertical force acting on the body. [g=10ms 2] B. The velocity ratio and efficiency of pulley are 8 and 85% respectively. How much effort is required to lift a load of 120kg with this system [g=10m/s²]
Force = Mass x Acceleration
Acceleration is (45m/s - 15 m/s)/5 sec) or 6 m/sec^2
Force = 2kg*(6 m/sec^2)
Force = 12 kg*m/s^2 1 kg*m/s^2 is the SI unit for force, and is named 1 Newton(N), after . . . Newton.
Force = 12N
B. I'm not sure how to interpret "The velocity ratio and efficiency of pulley are 8 and 85% respectively." I'll assume "effort" is the energy required.
I'll calculate the energy required in a perfect system, and then we'll consider the efficiency issues.
By lifting an object with mass off the Earth's surface (height = 0 meters) we impart a potential energy, PE, to the object. This energy is stored in the object until it is allowed to move back closer to Earth. This potential energy is given by the equation:
PE = mgh
where PE is potential energy in Joules, m is mass in kg, g is the acceleration due to Earth's gravity (9.8 m/sec^2, but we'll use 10 m/sec^2 as stated in the problem), and h is the vertical distance moved, in meters.
PE = (120kg)(10 m/sec^2)(h). We aren't given a height, h. Let's express the answer in terms of 1 meter: How much potential energy is put into the 120kg load to raise it 1 meter?
PE = (120kg)(10 m/sec^2)(1 m)
PE = 1200 kg*m^2/sec^2 or 1200 kg*m/sec^2 per meter
The unit kg*m/sec^2 is 1 Joule
PE = 1200 Joules/meter
1200 Joules are required to raise 120kg 1 meter. This is increased due to the less-tha-100% efficiency of 85%.
At 85% efficiency, the energy required would be 1200J/0.85 = 1412 J to raise 120kg 1 meter, with 85% efficiency, I don't6 know how to handle the velocity ratio number.
A spring with a force constant of 3x10^3 Nm-1 is used to measure the mass of an object. If the spring extends by 5cm when the object is hung from it, the mass of the object is
Answer:
15.29 kg
Explanation:
F = k * d 5cm = .05 m
= 3 x 10^3 n/m * .05 m = 150 N
= 150 kg -m / s^2
150 kg- m / s^2 / 9.81 m/s^2 =15.29kg
A doctor has a patient blow on one side of a U-shaped tube that is partially filled with water and has a ball floating on the other side, as shown in the image below. If the ball rises with a force of 150 N, what pressure did the patient apply to his side of the tube?
A.
0.15 Pa
b.
150Pa
c.
100,000 Pa
D.
150,000 Pa
The patient apply pressure to his side of the tube is 15 x 10⁴ N/m². The correct option is D.
What is pressure?The pressure is the amount of force applied per unit area. It is represented as
Pressure p = Force/Area
Given is a doctor has a patient blow on one side of a U-shaped tube that is partially filled with water and has a ball floating on the other side. The ball rises with a force of 150 N. The cross section are of the tube is 0.001 m³
The pressure applied is
p = 150 /0.001
p = 15 x 10⁴ N/m²
Hence, the patient apply pressure to his side of the tube is 15 x 10⁴ N/m².
Learn more about pressure.
https://brainly.com/question/12971272
#SPJ1
What cloud extending to the gravitational limits of the solar system would comets come from?.
The Oort cloud extends to the gravitational limits of the solar system would comets come from.
What is oort cloud?It is a hypothetical idea of a cloud of mostly frozen planetesimals that would orbit the Sun at distances between 2,000 and 200,000 AU.
The Oort cloud reaches the solar system's outer gravitational boundaries, where comets originate.
Hence cloud extending to the gravitational limits of the solar system will be oorto cloud.
To learn more about the oort cloud refer;
https://brainly.com/question/23368033
#SPJ1
One of the properties of alkali metals is that they don’t react with water.
Beryllium (Be) is the only alkaline earth metal that does not react with water.
What are alkali metals and their properties?
Alkali is a substance that produces hydroxide ions in aqueous solution.
PHYSICAL PROPERTIES OF ALKALIS:
Alkalis have a BITTER taste & have a SOAPY touch.Alkalis turn RED litmus paper BLUE.Alkalis have a pH value > 7.Alkalis are CAUSTIC.Alkalis CONDUCT ELECTRICITY due to the presence of MOBILE IONS in solution.CHEMICAL PROPERTIES OF ALKALI METAL
Alkalis react with Acids to form salt and water. This reaction is called neutralisation reaction.Alkalis react with ammonium salts to form salt, water and ammonia gas. .Alkalis react with solution of metal salt to form another metal salt and hydroxide.Beryllium (Be) is the only alkaline earth metal that does not react with water.
learn more about alkali metal here: https://brainly.com/question/18153051
#SPJ1
What type of reaction is being shown in this energy diagram?
A. Endothermic, because the reactants are higher in energy
B. Exothermic, because the products are higher in energy
C. Endothermic, because the products are higher in energy
D. Exothermic, because the reactants are higher in energy
[tex]\quad \huge \quad \quad \boxed{ \tt \:Answer }[/tex]
[tex]\qquad \tt \rightarrow \:Exothermic \:\;Reaction[/tex]
[ because reactants higher in energy ]
____________________________________
[tex] \large \tt Explanation \: : [/tex]
By the given graph, conclusion can be made that reactants have higher energy than products, hence for the reaction to take place, reactants must loose energy to form products. And once the energy is released, that reaction is called Exothermic.
Answered by : ❝ AǫᴜᴀWɪᴢ ❞
What local group of galaxies is the Milky Way part of?
Quasar Cluster
Andromeda Mini-Cluster
Virgo Supercluster
Hubble Open Cluster
The local group of galaxies which the Milky Way belong to is the Virgo Supercluster. C
What are Virgo Supercluster?The Virgo Supercluster as known as the Local Supercluster is a mass concentration of galaxies that contains the Virgo Cluster and Local Group which in turn contains the Milky Way and Andromeda galaxies, as a host as others galaxies.
Therefore, the local group of galaxies which the Milky Way belong to is the Virgo Supercluster.
Learn more about Milky Way here:
https://brainly.com/question/1241789
#SPJ1
a ball is thrown upward from the ground with an initial velocity of 50m/s. what is the total time spent by the ball in the air (g=10m/s2)
Answer:
[tex]\fbox {5 seconds}[/tex]
Explanation:
The formula which is used here :
[tex]\fbox {v = u + at}[/tex]
[tex]\longrightarrow \textsf {v : final velocity}[/tex]
[tex]\longrightarrow \textsf {u : initial velocity}[/tex]
[tex]\longrightarrow \textsf {a : acceleration}[/tex]
[tex]\longrightarrow \textsf {t : time taken}[/tex]
Solving :
v = u + at
0 = 50 + (-10)t
10t = 50
t = 5 seconds
Describe the mass of the reactants and products given in the balanced chemical equation
When the chemical response is balanced, the mass of the reactant is equal to the mass of the reactant.
Grounded on the law of Conservation of Mass
We balance the chemical equation since tittles aren't destroyed in the process and the mass is conserved. The mass of the reactant is equal to the mass of the product. No new titles are created or destroyed, there was only rearrangement or regrouping of tittles. This also means the number of titles of rudiments in both the product and reactant is equal.
Learn more about mass conservation here:
https://brainly.com/question/2874230
#SPJ10
Which of the following consists of photovoltaic cells?
1. Solar panels
2. Rube Goldberg device
3. Solar oven
4. Electric generator
When you attract every object in the universe with a force that is proportional to the mass of the objects and to the distance between them, you are obeying which law?
When you attract every object in the universe with a force that is proportional to the mass of the objects and to the distance between them, we are obeying Newton's law of universal gravitation.
Newton's law of universal gravitationNewton's law of universal gravitation states that the force of attraction between two masses in the universe is directly proportional to the product of the masses and inversely proportional to the the square of the distance between them.
The mathematical interpretation of the above law is
F ∝Mm/r²Removing the proportionality sign,
F = GMm/r².Where:
F = Force of attractionG = Gravitational constantM = Bigger massm = Smaller mass r = Distance between the masses.
From the above, When you attract every object in the universe with a force that is proportional to the mass of the objects and to the distance between them, we are obeying Newton's law of universal gravitation.
Learn more about Newton's law of universal gravitation here: https://brainly.com/question/9373839
#SPJ12
which factors can change the size of the shadow of an opaque object
a)the color of the object b)the material the object is made from
c)how far the object is from the light source d)the size of the screen
Answer:
it have two answers a and c
Explanation:
please mark me as brainlyst
Answer: c)how far the object is from the light source
d)the size of the screen
The size of the shadow depends on the distance of the source of light and on the angle at which the light rays fall on the object. If the source of light is closer to the object, a larger shadow is formed than when the source of light is far from the object.
The angle at which a light strikes an object affects the size and shape of its shadow. Shadows are longer when the light source is at a low angle (side on) and shorter when the light source is at a higher angle (overhead).
The position of the light source can change the size and shape of a shadow. A good example would be, when we are outside on a sunny day, we can see how our shadows change throughout the day. The Sun's position in the sky affects the length of the shadow.
∩_∩
(„• ֊ •„)♡
┏━∪∪━━━━┓
hope it helped
┗━━━━━━━┛
VR is always greater than MA. why?
Answer:
The mechanical advantage (M.A) of a real machine is always less than its velocity ratio(V.R) because mechanical advantage decreases due to the friction and weight of moving parts of the machine whereas the velocity ratio remains constant.
draw suitable diagrams where necessary
1. describe an experiment for the measurement of specific heat capacity of a liquid by principle of mixtures
The experiment is described below in the explanation.
What is specific heat?The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.
Heat lost or gained is represented as
Q = m C ΔT
In a calorimeter, a liquid is filled into the the cup with a temperature. A rod with high temperature is inserted into that liquid.
We use principle of mixture by putting a heated rod in a liquid and then measuring the rise of temperature of liquid.
So, heat is lost by rod and gained by liquid and colorimeter.
Thus, experiment is described.
Learn more about specific heat.
https://brainly.com/question/11297584
#SPJ1
which of the numbers on this figure indicates typical continental conditions (regional metamorphism)?
The number that indicates typical continental conditions (regional metamorphism) is that showing schist and gneiss rocks.
What is regional metamorphism?Regional metamorphism occurs when rocks undergoes changes as a result of high temperatures and pressure deep within the earth's crust.
Regional metamorphic rocks are usually foliated or squashed in appearance.
Examples of regional metamorphism rocks are schist and gneiss rocks.
Therefore, the figure that indicates typical continental conditions (regional metamorphism) is that showing schist and gneiss rocks.
Learn more about regional metamorphism at: https://brainly.com/question/14678538
#SPJ11
A length 550cm of thin thread wraps around a cylinder exactly 25 times calculate the circumference and the radius of the cylinder.
Answer:
3.5
Explanation:
hope it helps good day
solar power—generating facilities that generate electricity at large centralized facilities and transmit that power to homes and businesses through the electric grid are called ________.
Concentrated solar power facilities are solar power—generating facilities that generate electricity at large centralized facilities and transmit that power to homes and businesses through the electric grid .
What is solar power?Solar power refer to electric power or electricity that is generated from sun rays or radiations while using solar panels and other technologies.
Therefore, Concentrated solar power facilities solar power—generating facilities that generate electricity at large centralized facilities and transmit that power to homes and businesses through the electric grid.
Learn more about solar power below
https://brainly.com/question/17711999
#SPJ12
and electric motor lifts an elevator a vertical distance of 18.0m in a time of 30.0s by exerting an upward force of 6.0x10^3 N . what power does the electric motor produce?
Answer:
[tex]\fbox {3.6kW}[/tex]
Explanation:
Formula used :
[tex]\boxed {P = F \times v} \leftarrow \rightarrow \boxed {P = \frac{F \times S}{t}}[/tex]
Given :
⇒ F = 6 × 10³ N
⇒ S = 18 m
⇒ t = 30 s
Solving :
⇒ P = 6 × 10³ × 18 / 30
⇒ P = 2 × 100 × 18
⇒ P = 3600 W
⇒ P = 3.6kW
Eclipses and Moon Phases Activity Student sample of a modeled eclipse. This lesson highlighted eclipses and lunar phases. If you had to teach another person about the difference between the two events, how would you explain it
An eclipse is an event in which the sun or moon is blocked from view due to the presence of another celestial body, whereas lunar phases are caused by the reflection of the sunlight.
What is an eclipse?An eclipse is an astronomical phenomenon where one celestial body (e.g., sun, moon) cannot be observed because another is interposed between the Earth and the first one.
Eclipses can be divided into moon eclipses (we cannot see the moon) and sun eclipses (we cannot see the sun).
On the other hand, moon phases occur due to how sunlight reflects the near side of the Moon.
Moon phases can be divided into:
New MoonFirst QuarterThird QuarterFull MoonIn conclusion, an eclipse is an event in which the sun or moon is blocked from view due to the presence of another celestial body, whereas lunar phases are caused by the reflection of the sunlight.
Learn more about eclipses here:
https://brainly.com/question/8643
#SPJ1
Answer: the other person explained it all
Explanation:
3. Magnetite is
a) Natural magnet
(b)Artificial magnet
(c) Not a magnet
[tex] \huge \bold \red {Aɴswᴇʀ}[/tex]
Magnetite is a Natural magnet
all white dwarfs have masses in a small range—from about 0.5 to almost 1.4 malchemist sun symbol. why? (select all that apply.)
A white dwarf cannot support its own weight by its degenerate pressure if its mass is greater than 1.4 solar masses.
What are white dwarfs?
White dwarfs are stellar core remnant composed mostly of electron-degenerate matter.
White dwarf is very dense due to its large mass and smaller volume.
Reasons for comparable mass of white dwarfs and SunStars with main sequence masses less than about 0.5 solar masses cannot ignite the helium fusion required to become white dwarfs.A white dwarf cannot support its own weight by its degenerate pressure if its mass is greater than 1.4 solar masses.Learn more about white dwarfs here: https://brainly.com/question/24873876
#SPJ11
Which of the following would increase the amount of electricity generated by a wind turbine
Higher wind speeds would increase the amount of electricity generated by a wind turbine.
What is a power plant?A power plant is an industrial structure that generates electricity. The majority of power plants are linked to the electrical grid.
Stronger winds produce greater power because they enable the blades to revolve more quickly. Greater mechanical and electrical power from the generator result from faster spinning.
Hence, higher wind speeds would increase the amount of electricity generated by a wind turbine.
To learn more about the power plant, refer to the link;
https://brainly.com/question/7670779
#SPJ1
A rocket weighing 300,000 N is taking off from Earth with a total thrust of
460,000 N at an angle of 20 degrees, as shown in the image below. What is
the approximate vertical component of the net force that is moving the rocket
away from Earth?
Explanation:
vertical force = 460,000 * sin(70) - 300,000
Fv = 187,717.75N
help in solving this question please
(question is on the picture )
Answer:
Jesus
Explanation:
he is the way
Transparent or translucent materials
are used to make
A stop signs
B suitcases
C color filters
D toothbrushes
Answer:
C
Explanation:
you need to be able to see through a colour filter, which means youd need transparent or translucent
Transparent materials passes light and they reflect also. The color filters are made by transparent or translucent materials. Thus option c is correct.
What is transparency?The ability of a material to pass light through it is called transparency. Some transparent materials can reflect the light. For example mirror, glasses etc. The materials which passes light but are not transparent is called translucent materials.
The material which does not pass light inside is called opaque. Wood, plastics etc. are opaque materials. Transparent covers, glasses make their inside visible.
Colour filters are made by transparent or translucent materials. They are used to filter or choose a particular colour from a group of reflected lights.
Color filters are used in spectrometers and other optical devices. They filter the incoming wavelengths to select the desired one. Hence, option c is correct.
To find more about color filters, refer the link below:
https://brainly.com/question/28455847
#SPJ2
1. When building a house using bricks a damp course is laid just above the brick foundation. Explain why the damp course is necessary
Answer:
Damp Proofing:
Explanation:
The presence of damp proofing is very necessary to maintain the health of a structure. DPC plays an important role in all types of buildings and it should be necessary to know about the importance, requirements, and properties of DPC. In many of the buildings all over the world, the rising damp may be due to a damaged damp-proof course, or sometimes, there may be not any damp proof course in a building.
hello,help me with this out please i need it hurry but please ensure your answer is correct..I attach here with my question.
Topic:Forces in equilibrium.
Answer:
.409 N
Explanation:
For this to balance, the moments around the fulcrum must sum to zero.
On the left you have .21 ( is that down? I will assume it is)
Counterclockwise moments :
.21 * 40 + 1.0 * 20
Clockwise moments :
.5 * 20 + F * 45
these moments must equal each other
.21*40 + 1 *20 = .5 * 20 + F * 45
F = .409 N
When the light bulb is lit, a current is flowing through it. what condition must be met so that a current flows
Closed loop, conductor medium and presence of current in the wire are the conditions must be met so that a current flows.
What are the basic conditions for the flow of electric current?The loop from where the current passes must be closed. There must be some current in the circuit in order to lit the bulb. The medium through which current flows should be a conductor.
So we can conclude that closed loop, conductor medium and presence of current in the wire are the conditions must be met so that a current flows.
Learn more about current here: https://brainly.com/question/24858512
#SPJ1