A tractor collides with a car while driving down the road. The car travels at a speed of 25m/s and weighs 1,300 kg. What is the momentum of the car? If the tractor weighs 1,500 kg and traveled at 5 m/s what was the total momentum of the collision?

Limiting reactants are the reagents that are used up first in a chemical reaction, and determine the amount of product that can be formed.

Excess reactants are reagents that, once the limiting reactant has been used up, are still present in the reaction mixture.

The limiting reactant is important because it is the reagent that limits the amount of product that can be produced. When excess reactants are present, they do not contribute to the amount of product that can be produced and are thus considered to be "excess" material.

This excess material can cause problems in a reaction, such as unwanted byproducts or the formation of side reactions. Therefore, it is important to carefully control the amounts of reactants that are used in a reaction to ensure that the desired product is formed in the maximum possible yield.

Know more about Chemical reaction here

https://brainly.com/question/29039149#

#SPJ11

1) The solution is saturated. 2) 40 grams of KCl has dissolved in 100 grams.  3) 50 grams of KClO₃ will dissolve. 4) 75 grams of H₂O can dissolve 24.6 grams. 5) To saturate 28.4 grams of CaCl₂ must be added.

Saturated is a term used to describe a state of being filled to capacity, or containing the maximum amount possible. It is most commonly used in reference to liquids, where it indicates that no more of a given substance can be dissolved into the liquid. In chemistry, saturation refers to the point at which a solution has reached its maximum solubility.

1) The solution is saturated because 65 grams of Pb(NO₃)₂ has dissolved in 100 grams of H₂O at 25°C.

2) 40 grams of KCl has dissolved in 100 grams of H₂O at 10°C, so no more will dissolve.

3) 50 grams of KClO₃ will dissolve in 92.5 grams of H₂O at 70°C.

4) 75 grams of H₂O can dissolve 24.6 grams of K₂Cr₂O7 at 90°C.

5) At 25°C, 59 grams of CaCl₂ has dissolved in 100 grams of H₂O. To saturate the solution, an additional 28.4 grams of CaCl₂ must be added.

To learn more about saturated

https://brainly.com/question/2078413

#SPJ4

The mass (in grams) of quick lime, CaO that can be produced from the reaction is 560 g

First, we shall write the balanced equation for the reaction. This is given below:

CaCO₃ -> CaO + CO₂

Now, we shall obtain the mass of quick lime, CaO produced from the reaction can be obtain as illustrated below:

CaCO₃ -> CaO + CO₂

From the balanced equation above,

100 g of limestone, CaCO₃ decomposed to produce 56 g of quick lime, CaO

Therefore,

1 Kg (i.e 1000 g) of limestone, CaCO₃ will decompose to produce = (1000 × 56) / 100 = 560 g of quick lime, CaO

Thus, the mass of quick lime, CaO produced is 560 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

52 g of hydrogen will produce approximately 1154.75 liters of ammonia at STP.

To solve this problem, we need to use stoichiometry to determine the number of moles of ammonia produced from the given amount of hydrogen.

First, we can convert the mass of hydrogen to moles using its molar mass:

52 g H₂ x (1 mol H₂ ÷ 2.02 g H₂) = 25.74 mol H₂

Next, we can use the balanced chemical equation to determine the number of moles of ammonia produced per mole of hydrogen:

1 mol H₂ produces 2 mol NH₃

So, 25.74 mol H₂ will produce:

25.74 mol H₂ x (2 mol NH₃ ÷ 1 mol H₂) = 51.48 mol NH₃

Finally, we can use the ideal gas law to convert the number of moles of ammonia to its volume at standard temperature and pressure (STP):

51.48 mol NH₃ x (22.4 L/mol) = 1154.75 L NH₃

To learn more about hydrogen follow the link:

brainly.com/question/31018544

#SPJ4

0.0030 L - The significant figures are "3" and "0". There are two significant figures in this quantity.

0.1044 g - The significant figures are "1", "0", "4", and "4". There are four significant figures in this quantity.

53,069 mL - All digits are significant. There are five significant figures in this quantity.

0.00004715 m - In exponential notation, this is 4.715 x 10^-5 m. The significant figures are "4", "7", "1", and "5". There are four significant figures in this quantity.

57,600 s - The significant figures are "5", "7", and "6". There are three significant figures in this quantity.

0.0000007160 cm - In exponential notation, this is 7.160 x 10^-7 cm. The significant figures are "7", "1", "6", and "0". There are four significant figures in this quantity.

57600 - The significant figures are "5", "7", "6", and "0". There are three significant figures in this quantity.

Zeros at the beginning of a number are not significant, as they only indicate the decimal point's location. Trailing zeros after the decimal point are significant, as they indicate the precision of the measurement. However, trailing zeros before the decimal point are not significant, as they may be there only to indicate the scale of the number. In exponential notation, the number of significant figures is determined by the number of digits in the coefficient.

To know more about the Significant Figure, here

https://brainly.com/question/13061725

#SPJ4

The mass of copper sulfate in the given solution is 24 grams.

Copper sulfate, also known as cupric sulfate or copper (II) sulfate, is a chemical compound that consists of copper ions and sulfate ions. It has the molecular formula CuSO4 and is commonly used in agriculture, mining, and chemical industries.

In the given scenario, we have a solution of copper sulfate with a volume of 2 dm3 and a concentration of 12 g/dm3. This means that for every 1 dm3 of the solution, there are 12 grams of copper sulfate present. To find the mass of copper sulfate in the entire 2 dm3 solution, we can use the following formula:

Mass = Concentration x Volume

Substituting the given values, we get:

Mass = 12 g/dm3 x 2 dm3
Mass = 24 g

Therefore, the mass of copper sulfate in the given solution is 24 grams.

To know more about copper sulfate, visit:

https://brainly.com/question/22560035#

#SPJ11

The coefficient in front of Cl₂ is 1, wen the equation is balanced

The balanced chemical equation for the reaction between Zinc and Chlorine gas is:

Zn + Cl₂ → ZnCl₂

To balance this equation, we need to make sure that the number of atoms of each element is equal on both the reactant and product side of the equation.

In this case, there is one Zinc atom and two Chlorine atoms on the reactant side, and one Zinc atom and two Chlorine atoms on the product side. So, the equation is already balanced.

Learn more about balanced equation at:

https://brainly.com/question/11904811

#SPJ1

Using two styrofoam cups as a calorimeter is an economical way of determining heat values because styrofoam is a good insulator, which means that it prevents heat exchange between the system and the surroundings.

Therefore, it is a good choice for an adiabatic container. Additionally, styrofoam cups are readily available and disposable, making them a convenient and low-cost option for conducting experiments.

One of the major pitfalls of using this system is that it is not a completely closed system, which means that heat can still escape or enter from the surroundings, although at a slower rate than if the cups were made of a different material.

This can result in errors in the measurement of the heat change, as the actual heat change of the system may be different from the measured heat change. This is especially true for reactions that produce or consume gases, as these gases can escape from the cups and contribute to the heat exchange with the surroundings.

Therefore, it is important to minimize heat loss or gain to the surroundings as much as possible, such as by using a lid or insulating the cups further.

To know more about calorimeter refer to-

https://brainly.com/question/4802333

#SPJ11

To solve for the specific heat capacity of aluminum, we can use the formula:
q = m × c × ΔT, Where q is the heat transferred, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

First, we need to calculate the heat transferred from the aluminum to the water:

q = mAl × cAl × ΔTAl
q = (3.90 g) × cAl × (28.6°C - 99.3°C)
q = -978 J

Note that we get a negative value for q because heat is transferred from the aluminum to the water, so the aluminum loses heat.

Next, we can calculate the heat gained by the water:

q = mwater × cwater × ΔTwater

q = (10.0 g) × cw × (28.6°C - 22.6°C)
q = 240 J

Setting these two equations equal to each other, we can solve for the specific heat capacity of aluminum:

mAl × cAl × ΔTAl = mwater × cwater × ΔTwater
cAl = (mwater × cw × ΔTwater) / (mAl × ΔTAl)
cAl = (10.0 g) × (4.184 J/g·°C) × (28.6°C - 22.6°C) / [(3.90 g) × (99.3°C - 28.6°C)]
cAl = 0.900 J/g·°C

Therefore, the specific heat capacity of aluminum is 0.900 J/g·°C.

For more questions on: capacity

https://brainly.com/question/27862577

#SPJ11

The concentration of the [tex]CH3NH2[/tex] solution is 1.84 M.

The balanced equation for the reaction between [tex]HCl[/tex]and [tex]CH3NH2[/tex] is:

[tex]CH3NH2 + HCl → CH3NH3+Cl-[/tex]

From the equation, we can see that the acid and base react in a 1:1 molar ratio. Therefore, we can use the following equation to calculate the concentration of the [tex]CH3NH2[/tex]solution:

[tex]M(CH3NH2) x V(CH3NH2) = M(HCl) x V(HCl)[/tex]

where:

[tex]M(CH3NH2)[/tex]= concentration of [tex]CH3NH2[/tex] solution (unknown)

[tex]V(CH3NH2)[/tex] = volume of [tex]CH3NH2[/tex] solution used (unknown)

[tex]M(HCl)[/tex] = concentration of[tex]HCl[/tex]solution (1.84 M)

[tex]V(HCl)[/tex] = volume of [tex]HCl[/tex] solution used (28.25 mL or 0.02825 L)

Solving for [tex]M(CH3NH2)[/tex], we get:

[tex]M(CH3NH2) = (M(HCl) x V(HCl)) / V(CH3NH2)[/tex]

[tex]M(CH3NH2)[/tex] = (1.84 M x 0.02825 L) / 0.02825 L

[tex]M(CH3NH2)[/tex] = 1.84 M

To know more about concentration refer to-

https://brainly.com/question/10725862

#SPJ11

Lake B with a greater ppm of calcium carbonate would be able to neutralize a greater amount of acid rain.

Calcium carbonate (CaCO₃) acts as a buffer in lakes and streams by neutralizing any acid rain that may enter the water supply. A buffer is a substance that serves to resist small changes in acidity or alkalinity in a solution. Environmental scientists monitoring pollution levels are measuring buffer levels in two specific lakes. They found that Lake B had a greater ppm of calcium carbonate than Lake A.

Since calcium carbonate causes alkalinity, which allows it to function as a buffer, neutralizing any acid rain that may enter the water supply, Lake B would be able to neutralize a greater amount of acid rain than Lake A because it has a greater ppm of calcium carbonate.

To know more about buffer, refer:

https://brainly.com/question/16941547

#SPJ4

In general, there are three types of bonds: sigma bonds (single bonds), one sigma bond and one pi bond (double bonds), and one sigma bond and two pi bonds (triple bonds).

Sigma bonds are the simplest type of covalent bond, formed by the direct overlap of atomic orbitals between two component atoms. These bonds result in a strong, stable connection and are typically found in single bonds.

In double bonds, there is one sigma bond and one pi bond between the component atoms. The sigma bond is formed as mentioned earlier, while the pi bond results from the sideways overlap of p orbitals, creating a bond above and below the sigma bond plane.

This combination of bonds leads to a shorter and stronger connection between the atoms compared to a single bond.

Lastly, in triple bonds, there is one sigma bond and two pi bonds between the component atoms.

The sigma bond is formed in the same manner as single and double bonds, while the two pi bonds occur when two sets of p orbitals overlap perpendicularly to each other, with one set above and below, and the other set in front and behind the sigma bond plane.

This configuration leads to an even shorter and stronger bond compared to double bonds.

To identify the bond types between component atoms, you will need to examine the molecular structure and electron sharing between the atoms involved. Count the number of shared electron pairs to determine if it's a single (sigma), double (sigma and pi), or triple bond (sigma and two pi bonds).

To know more about bonds, visit:

https://brainly.com/question/17405470#

#SPJ11

There are 0.596 moles of nickel(III) phosphate in 98.3 grams of the compound.

To calculate the number of moles in 98.3 grams of nickel(III) phosphate, we need to use the formula:

moles = mass (in grams) / molar mass

First, we need to find the molar mass of nickel(III) phosphate. To do this, we need to know the chemical formula of the compound. Nickel(III) phosphate has the chemical formula NiPO4. The molar mass of nickel(III) phosphate can be calculated by adding the atomic masses of nickel, phosphorus, and four oxygen atoms:

Molar mass of NiPO4 = (1 x atomic mass of Ni) + (1 x atomic mass of P) + (4 x atomic mass of O)

Molar mass of NiPO4 = (1 x 58.69) + (1 x 30.97) + (4 x 15.99)

Molar mass of NiPO4 = 164.67 g/mol

Now we can use the formula above to calculate the number of moles:

moles = 98.3 g / 164.67 g/mol

moles = 0.596 moles

Therefore, there are 0.596 moles of nickel(III) phosphate in 98.3 grams of the compound.

To know more about compound, visit:

https://brainly.com/question/13516179#

#SPJ11

When the steam condenses, we can collect 204.06 mL of water.

To answer this question, we need to use the ideal gas law equation, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to convert the given temperature of 1069°C to Kelvin by adding 273.15, giving us 1342.15 K. We can then calculate the number of moles of steam needed to fill the drum by rearranging the ideal gas law equation to solve for n: n = PV/RT.

Plugging in the given values, we get n = (1.00 atm)(162 L)/(0.08206 L·atm/mol·K)(1342.15 K) = 11.32 moles of steam.

To calculate the mass of water in grams, we can use the fact that 1 mole of water weighs 18.015 g. Thus, the mass of water needed to fill the drum as steam is 11.32 moles x 18.015 g/mol = 204.06 g.

When the temperature in the drum is decreased to 227°C, all the steam condenses back into water. The heat released by the steam is given off to the surroundings, and the water vapor loses energy and condenses to form liquid water. We can calculate the volume of water that is formed using the fact that 1 mL of water has a mass of 1.00 g.

Thus, the mass of the water that forms is 204.06 g, which is equivalent to 204.06 mL of water. Therefore, when the steam condenses, we can collect 204.06 mL of water.

To know more about steam, visit:

https://brainly.com/question/15447025#

#SPJ11

The scientist could infer that the sedimentary rock in the Himalaya Mountains was formed through processes like weathering, erosion, deposition, and lithification. The rock cycle played a crucial role in creating this landform.

Tectonic plate movement and the collision between the Indian and Eurasian plates led to the uplift and folding of these sedimentary layers, ultimately forming the high elevation mountain range.

Based on the rock cycle and the formation of major landforms, the scientist could infer that the sedimentary rock was most likely formed from the accumulation of sediment in a low-lying area, such as a river delta or shallow sea. Over time, the sediment was buried and compacted, eventually forming sedimentary rock.

This rock was then subjected to tectonic forces, likely as a result of the collision of two tectonic plates, which caused it to be uplifted and exposed at a high elevation in the Himalaya Mountains.

Therefore, the scientist could infer that the sedimentary rock became part of the mountain range through a combination of geological processes, including sedimentation, compaction, tectonic activity, and uplift.

To know more about rock cycle:
https://brainly.com/question/29548493

#SPJ11

The complete reaction would be; 2 NaCl --> 2 Na + Cl2 + H

Energy is released when an exothermic process continues in the form of heat, light, or sound. In this way, the reactants' chemical bonds initially hold the energy, which is later released as the bonds are broken and new ones are formed.

Heat or other forms of energy are released as a result of the energy differential between the reactants and the reaction's products. In an exothermic process, energy is assumed to be on the side of the products.

Learn more about energy:https://brainly.com/question/26219779

#SPJ1

The volume that is needed is 173 mL of KOH solution is needed to prepare this buffer.

The reaction between acetic acid (CH₃COOH) and KOH can be written as follows.

CH₃COOH +  KOH ------------->  CH₃COOK +  H₂O

CH3COOH is a weak acid and CH₃COOK is its strong salt, therefore together they make a buffer system.

Let's say we add "x" moles of base KOH . Let's draw ICE table to find out moles at equilibrium

Initial moles of CH₃COOH are 0.654 mol/L * 625 mL * 1 L / 1000 mL = 0.40875 mol

 CH3COOH KOH CH3COOK H2O

I 0.40875 x 0 -

C -x -x +x -

E 0.40875 - x  0 x  

At equilibrium, we have 0.40875 - x moles of acid and x moles of its conjugate base.

Let's use Henderson Hasselbalch equation to solve for x.

pH = pKa +  log  ( base/ acid)

the required pH is 5.87 and pKa is given as 4.76

5.87 = 4.76 + log ( x / 0.40875 - x )

5.87 - 4.76 = log ( x / 0.40875 - x )

1.11 = log ( x / 0.40875 - x )

10¹°¹¹ =  ( x / 0.40875 - x )

12.88 = x / 0.40875 - x

12.88 ( 0.40875 - x ) =  x

5.266 - 12.88 x =  x

5.266 = 13.88 x

x = 5.266 / 13.88

x = 0.379

From ICE table, we know that x is moles of KOH

Molarity of KOH is given as 2.19M

Molarity = moles of KOH / liters

2.19 = 0.379 / Liters

Liters of KOH = 0.379 / 2.19

Liters of KOH = 0.173 L

173 mL of KOH solution is needed to prepare this buffer.

To learn more about molarity check the link below-

https://brainly.com/question/30404105

#SPJ4

The enthalpy change when 8.00 g of nitrogen oxide react is -15.162 kJ for the given chemical reaction.

The molar mass of NO =  30.01 g/mol

8.00 g of NO  = 8.00 g / 30.01 g/mol

8.00 g of NO = 0.266 mol of NO

Heat rejection = 57. 0 kJ

Here, 1 mole of NO reacts with 1/2 mole of Oxygen to produce 1 mole of [tex]NO_{2}[/tex]

The amount of Oxygen required for 0.266 mol of NO is calculated as:

The amount of Oxygen = 0.266 mol NO x (1/2) mol [tex]O_{2}[/tex]    / 1 mol NO

The amount of Oxygen required = 0.133 mol [tex]O_{2}[/tex]

The heat reaction will be:

-57.0 kJ/mol x 0.266 mol NO = -15.162 kJ

Therefore, we can conclude that the enthalpy change is -15.162 kJ.

To learn more about Nitrogen dioxide

https://brainly.com/question/21173133

#SPJ4

In this case, the error is 0%, indicating that your experimental value is identical to the known value.

To calculate the error between your calculated specific heat of each metal and the known values in Table C, you can use the following formula:

Error = [(Calculated specific heat of metal - Known specific heat of metal) / Known specific heat of metal] x 100

Here are the steps to follow:

Look up the known specific heat of each metal in Table C.

Calculate the specific heat of each metal using your experimental data.

Substitute the known and calculated specific heats of each metal into the formula above.

Calculate the error for each metal by performing the subtraction and division operations.

Multiply the result by 100 to express the error as a percentage.

For example, let's say you conducted an experiment to measure the specific heat of copper and obtained a value of 0.39 J/g°C. The known specific heat of copper from Table C is 0.39 J/g°C.

To calculate the error:

Error = [(0.39 J/g°C - 0.39 J/g°C) / 0.39 J/g°C] x 100

Error = 0 / 0.39 J/g°C x 100

Error = 0%

To know more about experimental value refer to-

https://brainly.com/question/10416781

#SPJ11

the answers to the questions based on the element sodium:

Is it metal? - Yes

Is it a non-metal? - No

Is it gas at room temperature? - No

Is it a solid at room temperature? - Yes

Is it a liquid at room temperature? - No

Is it in the first row (period) of the periodic table? - No

Is it in the second row (period) of the periodic table? - Yes

Is it in the third row (period) of the periodic table? - No

Is it in the fourth row (period) of the periodic table? - No

Is it in the fifth row (period) of the periodic table? - No

Is it in the sixth row (period) of the periodic table? - No

Is it in the seventh row (period) of the periodic table? - No

Is it in the eighth row (period) of the periodic table? - No

Is it a noble gas? - No

Is it a halogen? - No

Is it an alkali metal? - Yes

Is it an alkaline earth metal? - No

Is it a transition metal? - No

Does its symbol start with the letter "C"? - No

Does it have an atomic number greater than 50? - No (Sodium has an atomic number of 11)

Periodic Table 20 Questions" is a game where one player thinks of an element from the periodic table, and the other player asks up to 20 yes or no questions to guess the element.

The questions are usually related to the element's properties, such as its atomic number, symbol, group, or period, as well as its physical and chemical characteristics.

learn more about the Periodic table here

https://brainly.com/question/15987580

#SPJ1

the question is incomplete. complete question is

The element is sodium(Na)

Is it metal? - Yes or No

Is it a non-metal? - Yes or No

Is it gas at room temperature? - Yes or No

Is it a solid at room temperature? - Yes or No

Is it a liquid at room temperature? - Yes or No

Is it in the first row (period) of the periodic table? - Yes or No

Is it in the second row (period) of the periodic table? - Yes or No

Is it in the third row (period) of the periodic table? - Yes or No

Is it in the fourth row (period) of the periodic table? - Yes or No

Is it in the fifth row (period) of the periodic table? - Yes or No

Is it in the sixth row (period) of the periodic table? - Yes or No

Is it in the seventh row (period) of the periodic table? - Yes or No

Is it in the eighth row (period) of the periodic table? - Yes or No

Is it a noble gas? - Yes or No

Is it a halogen? - Yes or No

Is it an alkali metal? - Yes or No

Is it an alkaline earth metal? - Yes or No

Is it a transition metal? - Yes or No

Does its symbol start with the letter "C"? - Yes or No

Does it have an atomic number greater than 50? - Yes or No

To find the molarity of 4.18 g MgCl2 in 500 mL of water, we first need to calculate the number of moles of MgCl2 present in the solution.

MgCl2 has a molar mass of 95.21 g/mol (Mg is 24.31 g/mol and Cl is 35.45 g/mol). Therefore, the number of moles of MgCl2 in 4.18 g is:

4.18 g / 95.21 g/mol = 0.04396 mol MgCl2

The solution's volume must then be changed from mL to L:

500 mL = 0.5 L

Finally, we can use the formula for molarity:

Molarity = moles of solute / volume of solution in liters

Molarity = 0.04396 mol / 0.5 L = 0.08792 M

Therefore, the molarity of 4.18 g MgCl2 in 500 mL of water is 0.08792 M.

What do you mean by molarity?

The number of moles of solute per liter of solution is known as molarity, which serves as a measurement of a solution's concentration. It is denoted by the symbol "M" and is expressed in units of moles per liter (mol/L).

Molarity is an important concept in chemistry, as it is used to measure the concentration of solutions in a variety of chemical reactions and processes. It is commonly used in stoichiometry calculations to determine the amount of reactants or products required in a chemical reaction, and is also used in titration experiments to determine the concentration of an unknown solution.

To know more about Molarity:

https://brainly.com/question/8732513

#SPJ11

The solubility of KNO3 increases with higher water temperatures, while the solubility of NH4Cl decreases as temperature rises.

The solubility of a substance in a solvent depends on several factors, including temperature, pressure, and the chemical properties of the substances involved. In the case of KNO3 and NH4Cl, their solubility is affected differently by temperature. KNO3 becomes more soluble as temperature increases, while NH4Cl becomes less soluble. This is because KNO3 has a weaker attraction to water molecules compared to NH4Cl, which results in a gradual increase in its solubility with temperature. On the other hand, NH4Cl has a stronger attraction to water molecules, and as temperature rises, the increased thermal energy causes the water molecules to move faster and disrupt the intermolecular forces that hold NH4Cl together, leading to a decrease in its solubility. Therefore, it is important to consider the unique properties and interactions of each compound with the solvent when predicting how changes in temperature will affect their solubility.

Know more about Solubility here:

https://brainly.com/question/31464655

#SPJ11

Tectonic events can impact the flow of radiant energy in various ways. One of the primary ways is through the formation of mountains and the alteration of landforms.

When tectonic plates collide and push against each other, they can form mountains, which can affect the flow of radiant energy. Mountains can block or redirect the flow of wind, which in turn can affect the amount of solar radiation that reaches the earth's surface.

They can also create changes in atmospheric pressure and temperature that impact the movement of air masses, which can affect the flow of radiant energy.

Tectonic events can also impact the flow of radiant energy by altering the composition of the atmosphere.

For example, volcanic eruptions can release large amounts of sulfur dioxide and other particles into the atmosphere, which can reflect and scatter incoming solar radiation, leading to cooling of the earth's surface.

To know more about radiant energy refer to-

https://brainly.com/question/29102331

#SPJ11

6.00 moles of carbon dioxide are produced when 6.00 moles of methane are used. The correct answer is (d) 6.0.

To determine how many moles of carbon dioxide are produced when 6.00 moles of methane are used, we need to look at the balanced chemical equation: CH4 + 2O2 -> CO2 + 2H2O.

First, we can observe that 1 mole of methane (CH4) reacts with 2 moles of oxygen (O2) to produce 1 mole of carbon dioxide (CO2) and 2 moles of water (H2O). This means that the mole ratio of methane to carbon dioxide is 1:1.

Since we have 6.00 moles of methane, we can use the mole ratio to find the number of moles of carbon dioxide produced.


1. Identify the mole ratio of methane to carbon dioxide from the balanced chemical equation (1:1).
2. Multiply the given moles of methane (6.00 moles) by the mole ratio to find the moles of carbon dioxide.

Calculation:
6.00 moles CH4 × (1 mole CO2 / 1 mole CH4) = 6.00 moles CO2

So, 6.00 moles of carbon dioxide are produced when 6.00 moles of methane are used. The correct answer is (d) 6.0.

To know more about carbon dioxide, visit:

https://brainly.com/question/3049557#

#SPJ11

The molarity of the sodium hydroxide, NaOH, needed to react with 15.7 mL of 0.700 M H₃PO₄, is 0.753 M

The molarity of the sodium hydroxide, NaOH, needed can be obtained as shown below:

3NaOH + H₃PO₄ —> Na₃PO₄ + 3H₂O

MaVa / MbVb = nA / nB

(0.7 × 15.7) / (Mb × 43.8) = 1 / 3

Cross multiply

Mb × 43.8 = 0.7 × 15.7 × 3

Divide both side by 43.8

Mb = (0.7 × 15.7 × 3) / 43.8

Mb = 0.753 M

Thus, we can conclude that the molarity of the NaOH needed is 0.753 M

Learn more about molarity:

https://brainly.com/question/13386686

#SPJ1

The compound Ti(NO3)4 dissociates in water as:

Ti(NO3)4 → Ti^4+ + 4 NO3^-

This means that each formula unit of Ti(NO3)4 produces 4 nitrate ions (NO3^-) in solution.

Therefore, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is:

0.25 M Ti(NO3)4 × 4 NO3^- ions / 1 Ti(NO3)4 formula unit = 1.00 M NO3^- ions

So, the concentration of NO3^- ions in a 0.25 M solution of Ti(NO3)4 is 1.00 M.

To know more about dissociates refer here

https://brainly.com/question/30983331#

#SPJ11

23.88  grams of fe2o3 are formed when 16.7 g of fe reacts completely with excess o2.

According to the synthesis reaction 4Fe + 3O₂ → 2Fe₂O₃, we need to determine how many grams of Fe₂O₃ are formed when 16.7 g of Fe reacts completely with excess O₂.

Step 1: Determine the molar mass of Fe and Fe₂O₃.
Fe: 55.85 g/mol
Fe₂O₃: (2 × 55.85) + (3 × 16.00) = 159.69 g/mol

Step 2: Convert grams of Fe to moles of Fe.
moles of Fe = (16.7 g) / (55.85 g/mol) = 0.299 moles

Step 3: Use the stoichiometry of the reaction to determine moles of Fe₂O₃ produced.
The reaction shows that 4 moles of Fe produce 2 moles of Fe₂O₃. Therefore,
moles of Fe₂O₃ = (0.299 moles Fe) × (2 moles Fe₂O₃ / 4 moles Fe) = 0.1495 moles Fe₂O₃

Step 4: Convert moles of Fe₂O₃ to grams of Fe₂O₃.
grams of Fe₂O₃ = (0.1495 moles) × (159.69 g/mol) = 23.88 g

23.88 g of fe203 is formed.

To know more about synthesis reaction click on below link:

https://brainly.com/question/24905694#

#SPJ11

The DOE (Department of Energy) likely picked reclaiming the water before it reaches the river as its goal to address environmental concerns and potential health hazards associated with contaminated water.

Water pollution can have significant negative impacts on aquatic life, human health, and the environment as a whole. Reclaiming the water before it reaches the river would prevent the contaminated water from spreading and potentially causing harm to people, animals, and the surrounding ecosystem.

Additionally, the DOE may have a legal responsibility to prevent the release of contaminated water into public waterways under environmental protection laws.

By reclaiming the water, the DOE can fulfill its obligation to protect the environment and public health while also promoting sustainable water use and management practices.

To know more about environmental concerns refer to-

https://brainly.com/question/30008376

#SPJ11

Acid rain water with a pH of 2 is 10,000 times more acidic than unpolluted rainwater with a pH of 6.

The pH scale is logarithmic, meaning that each change in pH by one unit represents a tenfold change in acidity. Therefore, the difference in pH between acid rain (pH 2) and unpolluted rainwater (pH 6) is four units. To calculate the difference in acidity, we take the antilogarithm of four, which is 10,000. This means that acid rain is 10,000 times more acidic than unpolluted rainwater.

Mathematically, this can be shown as:

[H⁺] in acid rain / [H⁺] in unpolluted rainwater

Therefore, acid rain is 10,000 times more acidic than unpolluted rainwater.

To learn more about Acid rain water, here

https://brainly.com/question/22143130
#SPJ4

There are 1.142 grams of C₃H₆ in the 652 mL of sample of the gas at STP.

Using ideal gas equation,

PV = nRT,  pressure is P, volume is V, number of moles in n, gas constant is R, the temperature is T. At STP, the pressure is 1 atm, the temperature is 273 K, and the molar volume is 22.4 L.

We can use the following steps to calculate the number of moles of C₃H₆ present in 652 mL of the gas at STP:

Convert the volume to liters:

652 mL = 0.652 L

Calculate the number of moles using the ideal gas law:

PV = nRT

(1 atm) (0.652 L) = n (0.0821 L·atm/mol·K) (273 K)

n = 0.0272 mol

Calculate the mass of C₃H₆ using its molar mass:

m = n × M

M(C₃H₆) = 42.08 g/mol

m = 0.0272 mol × 42.08 g/mol

m = 1.142 g

It is nearest to option D, hence the mass is 1.22 grams.

To know more about ideal gas equation, visit,

https://brainly.com/question/27870704

#SPJ4