The equilibrium constant, Kp, for the following reaction is 10.5 at 350 K.
CH₂(g) + CCl₂(g) -> 2CH₂Cl₂(g)
If H° for this reaction is -18.8 kJ, what is the value of K, at 234 K?

The natural process being modeled is weathering, specifically physical weathering.

Physical weathering is the process by which rocks and minerals are broken down into smaller pieces without changing their chemical composition. Water is one of the most significant agents of physical weathering.

The scenario described in the question illustrates how water can cause physical weathering by soaking into a lump of clay, then drying out, leaving behind small pebbles and other components. The water expands as it freezes, causing the clay to crack, and as it dries, it evaporates, leaving behind the broken pieces.

Over time, this process can break down larger rocks and minerals into smaller particles, creating sediment that can be transported by wind, water, or ice, and deposited elsewhere. The result of physical weathering is often a mix of angular fragments that have the same composition as the original rock or mineral.

To know more about physical weathering, refer here:

https://brainly.com/question/29616084#

#SPJ11

Specific Heat of Glass is: 0.2 J/g°C.

To calculate the specific heat of the glass, you can use the formula:

Q = mcΔT

where Q represents the heat absorbed (32 J), m is the mass of the glass (4.0 g), c is the specific heat we need to find, and ΔT is the change in temperature (45°C - 5°C).

Rearranging the formula to find the specific heat (c):

c = Q / (mΔT)

First, calculate the change in temperature (ΔT):

ΔT = 45°C - 5°C = 40°C

Now, plug the values into the formula:

c = 32 J / (4.0 g × 40°C)

c = 32 J / 160 g°C

c = 0.2 J/g°C

So, the specific heat of the glass is 0.2 J/g°C.

To know more about specific heat:

https://brainly.com/question/27991746

#SPJ11

To solve this problem, we can use the following equation:

Moles of acid = Moles of base

where "acid" refers to the HCl and "base" refers to the NaOH.

First, let's calculate the moles of HCl:

moles of HCl = concentration of HCl × volume of HCl

            = 0.152 mol/L × 0.0223 L

            = 0.0033856 mol

Next, let's calculate the volume of NaOH required to neutralize the HCl:

moles of NaOH = moles of HCl

volume of NaOH = moles of NaOH / concentration of NaOH

We know the concentration of NaOH (0.200 M), so let's substitute in the values:

moles of NaOH = 0.0033856 mol

volume of NaOH = 0.0033856 mol / 0.200 mol/L

              = 0.016928 L

              = 16.928 mL (rounded to three decimal places)

Therefore, 16.928 mL of 0.200 M NaOH is required to neutralize 22.3 mL of 0.152 M HCl.

To know more about problem refer here

https://brainly.com/question/31611375#

#SPJ11

A gas has an initial volume of 37.5 mL at a pressure of 102.3 kPa. When the volume decreases to 27.5 mL, the pressure increases to 139.8 kPa.

This question can be solved using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature. Therefore, we can use the equation P1V1 = P2V2, where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.

Substituting the given values into the equation, we get:

P1V1 = P2V2

(102.3 kPa)(37.5 mL) = P2(27.5 mL)

Solving for P2, we get:

P2 = (102.3 kPa)(37.5 mL) / 27.5 mL

P2 = 139.32 kPa

Therefore, the pressure of the gas when its volume is 27.5 mL will be 139.32 kPa.

To know more about the Boyle's Law refer here :

https://brainly.com/question/30367067#

#SPJ11

The molar enthalpy of combustion of methane in the gas phase is approximately -1360 kJ/mol, which is closest to -297 kJ/mol. The correct option is B.

To determine the molar enthalpy of combustion of methane, we need to use the bond enthalpies provided to calculate the energy released when the bonds in methane are broken and new bonds are formed in the combustion reaction.

The balanced chemical equation for the combustion of methane is:

CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)

Breaking the bonds in methane requires energy while forming the new bonds in carbon dioxide and water releases energy. The molar enthalpy of combustion is the net energy released per mole of methane combusted.

Using the bond enthalpies given, we can calculate the energy required to break the bonds in methane:

4C-H bonds x 413 kJ/mol = 1652 kJ/mol
1C-C bond x 347 kJ/mol = 347 kJ/mol

Total energy required to break bonds in methane = 1652 kJ/mol + 347 kJ/mol = 1999 kJ/mol

Next, we can calculate the energy released by forming the new bonds in carbon dioxide and water:

2C=O bonds x 745 kJ/mol = 1490 kJ/mol
4O-H bonds x 467 kJ/mol = 1868 kJ/mol

Total energy released by forming new bonds = 1490 kJ/mol + 1868 kJ/mol = 3358 kJ/mol

The net energy released in the combustion of methane is the energy released by forming new bonds minus the energy required to break the old bonds:

Net energy released = 3358 kJ/mol - 1999 kJ/mol = 1359 kJ/mol

to know more about combustion reaction refer here:

https://brainly.com/question/30566775#

#SPJ11

The Si unit of Hertz (Hz) represents the frequency of a wave, which is defined as the number of complete cycles of a wave passing a fixed point per second.

In other words, one Hertz equals one wave passing a fixed point in one second. This unit is commonly used to measure the frequency of various types of waves, including sound waves, electromagnetic waves, and radio waves.

For example, if a sound wave has a frequency of 440 Hz, it means that the sound wave completes 440 cycles of compression and rarefaction (the peaks and troughs of the wave) per second. Similarly, if a radio wave has a frequency of 100 MHz (megahertz), it means that the wave completes 100 million cycles per second.

The Hertz unit was named after Heinrich Hertz, a German physicist who was the first to demonstrate the existence of electromagnetic waves. Hertz's experiments in the late 19th century paved the way for the development of modern radio, television, and other forms of wireless communication.

In summary, the Si unit of Hertz equals one wave passing a fixed point in one second, and it is a fundamental unit of measurement for the frequency of various types of waves.

To know more about frequency, visit:

https://brainly.com/question/5102661#

#SPJ11

To solve this problem, we can use the formula:

q = m*c*ΔT, where q is the amount of heat energy absorbed by the gold, m is the mass of the gold, c is the specific heat capacity of gold, and ΔT is the change in temperature of the gold.

We are given the mass of gold (m = 4.1 g), the specific heat capacity of gold (c = 0.130 J/g °C), and the amount of energy used to heat the gold (q = 52.2 J). We are asked to find the final temperature of the gold (ΔT).

Rearranging the formula, we get:
ΔT = q/(m*c)
Substituting the values we know, we get:
ΔT = 52.2 J / (4.1 g * 0.130 J/g °C)
ΔT = 98.92 °C
This is the change in temperature of the gold. To find the final temperature, we add this to the original temperature of 25.0°C:
Final temperature = 25.0°C + 98.92°C
Final temperature = 123.92°C
Therefore, the final temperature of the gold is 123.1°C.

For more questions on: absorbed

https://brainly.com/question/29598149

#SPJ11

The number of moles of hydrogen gas needed is 0.213 moles, under the condition that their is a necessity of reacting 15.1g of chlorine gas to produce hydrogen chloride gas.


Here the balanced chemical equation for the reaction  regarding hydrogen gas and chlorine gas in the process of producing hydrogen chloride gas is
H₂(g) + Cl₂(g) → 2HCl(g)

The given molar mass of chlorine gas is 70.9 g/mol.
Now to evaluate the number of moles of chlorine gas in 15.1 g of chlorine gas,
We need to divide the mass by the molar mass

Number of moles of chlorine gas = Mass of chlorine gas / Molar mass of chlorine gas
= 15.1 g / 70.9 g/mol
= 0.213 mol

Then, from the balanced chemical equation, we can interpret that 1 mole of hydrogen gas reacts with 1 mole of chlorine gas to produce 2 moles of hydrogen chloride gas.
Hence, to calculate the number of moles of hydrogen gas required to react with 15.1 g of chlorine gas,

1 mol H₂ / 1 mol Cl₂ = x mol H₂ / 0.213 mol Cl₂

Evaluating for x,
x = (1 mol H₂ / 1 mol Cl₂) × (0.213 mol Cl₂)
= 0.213 mol H₂
To learn more about molar mass
https://brainly.com/question/837939
#SPJ4

Labeling the type of reaction:

This is a synthesis reaction because two elements (hydrogen and oxygen) are combining to form a compound (water).

Writing the balanced chemical equation:

2H2 + O2 → 2H2O

Determining how much water can be produced from 250.0 grams of hydrogen:

We need to use stoichiometry to calculate the amount of water produced from a given amount of hydrogen. The balanced chemical equation tells us that 2 moles of hydrogen reacts with 1 mole of oxygen to produce 2 moles of water.

First, let's convert 250.0 grams of hydrogen to moles:

moles of H2 = mass of H2 / molar mass of H2

           = 250.0 g / 2.016 g/mol

           = 124.01 mol

Using the mole ratio from the balanced chemical equation, we can calculate the moles of water produced:

moles of H2O = (2 moles of H2 / 2) × (1 mole of H2O / 2 moles of H2) × 124.01 moles of H2

            = 62.005 moles of H2O

Finally, we can convert moles of water to grams:

mass of H2O = moles of H2O × molar mass of H2O

           = 62.005 mol × 18.015 g/mol

           = 1115.9 g

Therefore, 250.0 grams of hydrogen can produce 1115.9 grams of water.

Determining how much water can be produced from 250.0 grams of oxygen:

We need to use stoichiometry again, but this time we'll start with the mass of oxygen.

From the balanced chemical equation, we know that 1 mole of oxygen reacts with 2 moles of hydrogen to produce 2 moles of water.

First, let's convert 250.0 grams of oxygen to moles:

moles of O2 = mass of O2 / molar mass of O2

           = 250.0 g / 31.999 g/mol

           = 7.813 moles

Using the mole ratio from the balanced chemical equation, we can calculate the moles of water produced:

moles of H2O = (1 mole of O2 / 2) × (2 moles of H2O / 1 mole of O2) × 7.813 moles of O2

            = 7.813 moles of H2O

Finally, we can convert moles of water to grams:

mass of H2O = moles of H2O × molar mass of H2O

           = 7.813 mol × 18.015 g/mol

           = 140.65 g

Therefore, 250.0 grams of oxygen can produce 140.65 grams of water.

Determining the limiting reactant:

To determine the limiting reactant, we need to compare the amount of product that can be produced from each reactant. The reactant that produces the smaller amount of product is the limiting reactant.

From our calculations above, we found that 250.0 grams of hydrogen can produce 1115.9 grams of water, and 250.0 grams of oxygen can produce 140.65 grams of water. Therefore, the limiting reactant is oxygen because it produces less water than hydrogen.

To know more about synthesis refer here

https://brainly.com/question/30514814?#

#SPJ11

The composition of the vapor phase is 25.2 mol% n-pentane and 4.8 mol% n-heptane, and the composition of the liquid phase is 67.4 mol% n-pentane and 32.6 mol% n-heptane.

To calculate the composition of the vapor and the liquid, we can use the Raoult's law equation:

P_A = X_A * P^0_A

where P_A is the partial pressure of component A, X_A is the mole fraction of component A, and P^0_A is the vapor pressure of pure component A.

For n-pentane, the vapor pressure at 101.32 kPa abs is 42.5 kPa abs, and for n-heptane, it is 12.1 kPa abs. Using the given mole fractions, we can calculate the partial pressures of each component in the mixture:

P_n-pentane = 0.6 * 42.5 = 25.5 kPa abs
P_n-heptane = 0.4 * 12.1 = 4.84 kPa abs

Next, we can use the total pressure of the system (101.32 kPa abs) and the partial pressures to calculate the mole fractions of each component in the vapor and the liquid phases:

For the vapor phase:
X_n-pentane = P_n-pentane / 101.32 = 0.252
X_n-heptane = P_n-heptane / 101.32 = 0.048

For the liquid phase:
Y_n-pentane = (0.6 - 0.4 * X_n-heptane) / (1 - X_n-heptane) = 0.674
Y_n-heptane = 0.326

Therefore, the composition of the vapor phase is 25.2 mol% n-pentane and 4.8 mol% n-heptane, and the composition of the liquid phase is 67.4 mol% n-pentane and 32.6 mol% n-heptane.

Know more about Composition of vapor and liquid phase here:

https://brainly.com/question/30504991

#SPJ11

B Answer:

Explanation:

Higher, 1020 mb +, rising pressure and temp are associated with clear skies and low precipitation

In 1974, the 1973-launched Mariner 10 spacecraft made history by flying by Mercury for the first time.

A vehicle made specifically for space travel is a spaceship. It can encompass both spacecraft made for study, observation, and the deployment of satellites and other payloads as well as those made for human exploration, communication, and transportation. They typically consist of a propulsion system, navigation system, communications system, and numerous payloads, among other things. Typically, a spacecraft needs a launch vehicle to get off the ground and a re-entry mechanism to land safely.

It recorded temperature readings, snapped pictures, and gathered data on the planet's atmosphere during its flyby. Then, radio waves were used to transmit all of this data back to Earth. The mission was a great success and revealed a tonne of fresh Mercury-related data.

To learn more about spacecraft, visit:

brainly.com/question/29383012

#SPJ1

The complete question is,

passed past Mercury in 1974, taking pictures, measuring temperatures, and gathering data on the atmosphere before radio-transmitting the data back to Earth.

If the final pressure of the gas is 1.50 atm, the initial pressure would be 2.16 atm.

In order to solve this problem, we need to use the combined gas law equation, which relates the pressure, volume, and temperature of a gas. The combined gas law states that PV/T = constant, where P is pressure, V is volume, and T is temperature.

We know the initial temperature, initial volume, final temperature, final volume, and final pressure of the gas. We can use this information to solve for the initial pressure.

First, we can use the combined gas law to find the constant in the equation:

(Pinitial)(Vinitial)/(Tinitial) = (Pfinal)(Vfinal)/(Tfinal)

Substituting in the values we know, we get:

(Pinitial)(135 L)/(353 K) = (1.50 atm)(103 L)/(285 K)

Solving for Pinitial, we get:

Pinitial = (1.50 atm)(103 L)(353 K)/(285 K)(135 L)

Pinitial = 2.16 atm

Therefore, the initial pressure of the gas was 2.16 atm.

In summary, we used the combined gas law equation to solve for the initial pressure of a gas sample with an initial temperature of 80℃ and an initial volume of 135 l that was cooled to a final temperature of 12℃ and a final volume of 103 l with a final pressure of 1.50 atm. We found that the initial pressure of the gas was 2.16 atm.

To know more about initial pressure, visit:

https://brainly.com/question/23710615#

#SPJ11

Answer:

d

Explanation:

because i did it

The reaction of sulfur dioxide (SO₂) with oxygen and water to form sulfuric acid (H₂SO₄) is responsible for acid rain. The reaction is: SO₂(g) + O₂(g) + H₂O(l) -> H₂SO₄(aq).

When flue gas from a coal-burning furnace is discharged into the atmosphere, it contains sulfur dioxide (SO₂) as one of its components. SO₂ can react with oxygen and water in the atmosphere to form sulfuric acid (H₂SO₄), which is a strong acid that can cause harm to the environment. Sulfuric acid is one of the main components of acid rain, which can damage crops, forests, and bodies of water, as well as erode buildings and other structures.

Acid rain can also be harmful to human health, as it can cause respiratory problems and other illnesses. Therefore, it is important to control the emissions of SO₂ from coal-burning furnaces and other sources to reduce the formation of sulfuric acid and the occurrence of acid rain.

To learn more about Acid rain, here

https://brainly.com/question/22143130

#SPJ4

The concentration of the acetic acid stock solution is 0.026259 M, considering significant figures.

To solve this problem, we first need to write out the balanced chemical equation for the reaction between acetic acid (CH₃CO₂H) and sodium hydroxide (NaOH):

CH₃CO₂H + NaOH → CH₃CO₂Na + H₂O

We can see from this equation that the stoichiometry of the reaction is 1:1 - that is, one mole of acetic acid reacts with one mole of NaOH. We also know that the volume of the analyte solution is 50 mL + 15 mL = 65 mL.

Next, we need to use the volume and concentration of the NaOH titrant to calculate the number of moles of NaOH that were added to the analyte solution:

V1 = 14.36 mL = 0.01436 L (convert mL to L)
C1 = 0.0915 M

n(NaOH) = V1 x C1 = 0.01436 L x 0.0915 mol/L = 0.00131294 mol

Since the stoichiometry of the reaction is 1:1, we know that this is also the number of moles of acetic acid that were present in the analyte solution. We can use this information to calculate the concentration of the stock solution:

n(CH₃CO₂H) = n(NaOH) = 0.00131294 mol
V2 = 50 mL = 0.05 L (convert mL to L)

M = n/V = 0.00131294 mol / 0.05 L = 0.026259 M

So the concentration of the acetic acid stock solution is 0.026259 M.

Learn more about stock solutions at https://brainly.com/question/3942978

#SPJ11

1.35 liters of a 0.26 M solution of K2(MnO4) would contain 75 g of K2(MnO4).

To determine the volume of a 0.26 M solution of K2(MnO4) needed to contain 75 g of K2(MnO4), we need to use the formula:

Molarity (M) = moles of solute / volume of solution (L)

First, convert the mass of K2(MnO4) to moles using its molar mass:

Molar mass of K2(MnO4) = 2 * (39.1 g/mol for K) + (54.9 g/mol for Mn) + 4 * (16 g/mol for O) = 214.2 g/mol

Moles of K2(MnO4) = 75 g / 214.2 g/mol ≈ 0.35 moles

Now use the molarity formula to find the volume:

0.26 M = 0.35 moles / volume (L)

Volume (L) = 0.35 moles / 0.26 M ≈ 1.35 L

So, approximately 1.35 liters of a 0.26 M solution of K2(MnO4) would contain 75 g of K2(MnO4).

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

Answer:

First, we need to calculate the number of moles of nitrogen gas required to form a monolayer:

n = (pv) / (rt)

where p is the pressure, v is the volume, r is the ideal gas constant, and t is the temperature in Kelvin.

At standard temperature and pressure, we have:

p = 1 atm

v = 7.6×10^3 mm^3 = 7.6×10^-6 m^3

t = 273 K

r = 8.31 J/(mol K)

So, n = (1 atm x 7.6×10^-6 m^3) / (8.31 J/(mol K) x 273 K) = 3.13×10^-7 mol

Next, we can calculate the number of nitrogen molecules in this amount of gas:

N = n x Na

where Na is Avogadro's number (6.02×10^23 molecules/mol).

N = 3.13×10^-7 mol x 6.02×10^23 molecules/mol = 1.88×10^17 molecules

Finally, we can calculate the surface area of the catalyst covered by these molecules:

A = N x a

where a is the area covered by a nitrogen molecule (0.162 nm^2), converted to m^2.

a = 0.162 nm^2 x (10^-18 m^2/nm^2) = 1.62×10^-20 m^2

A = 1.88×10^17 molecules x 1.62×10^-20 m^2/molecule = 3.05×10^-3 m^2

Therefore, the surface area of the catalyst covered by the nitrogen molecules is approximately 3.05×10^-3 m^2.

The new volume of the hydrogen gas is 5.12 L when the pressure is decreased to 0.977 atm.

The relationship between pressure and volume is described by Boyle's Law, which states that when the pressure of a gas decreases, its volume increases proportionally, and vice versa. In other words, the pressure and volume of a gas are inversely proportional, assuming temperature and amount of gas remain constant.

In this case, the initial pressure of the hydrogen gas is 0.997 atm, and its initial volume is 5.00 L. If the pressure is decreased to 0.977 atm, we can use Boyle's Law to calculate the new volume:

P1V1 = P2V2

Where P1 and V1 are the initial pressure and volume, and P2 and V2 are the new pressure and volume.

Substituting the given values, we get:

(0.997 atm)(5.00 L) = (0.977 atm)(V2)

Solving for V2, we get:

V2 = (0.997 atm)(5.00 L) / (0.977 atm)

V2 = 5.12 L

Therefore, the new volume of the hydrogen gas is 5.12 L when the pressure is decreased to 0.977 atm.

To know more about hydrogen gas, visit:

https://brainly.com/question/12494649#

#SPJ11

For example, the chemical formula for water is H₂O. This tells us that there are two hydrogen atoms (H) and one oxygen atom (O) in each molecule of water. To count the number of atoms in a chemical formula, we can use the subscripts (the numbers that come after each element symbol) to determine how many atoms of each element are present. For example, in the chemical formula NaCl (which represents salt), there is one sodium (Na) atom and one chlorine (Cl) atom in each molecule.

Let us discuss this in detail. To count atoms and elements in a chemical formula, you need to understand the following terms:

- Atoms: The basic unit of a chemical element, consisting of protons, neutrons, and electrons.
- Elements: A substance that cannot be broken down into simpler substances, consisting of only one type of atom.
- Chemical Formula: A representation of a substance using symbols for its constituent elements and numbers to indicate the ratio of atoms in the compound.

Now, let's count the atoms and elements in a given chemical formula, for example, H₂O (water):

1. Identify the elements in the formula: In this case, we have two elements - Hydrogen (H) and Oxygen (O).
2. Count the atoms of each element: The subscript number next to each element symbol indicates the number of atoms of that element in the compound. For Hydrogen (H), the subscript is 2, meaning there are 2 Hydrogen atoms. For Oxygen (O), there is no subscript, which means there is only 1 Oxygen atom (when no subscript is present, it is understood to be 1).

So, in the chemical formula H₂O, there are 2 Hydrogen atoms and 1 Oxygen atom, for a total of 3 atoms.

Learn more about chemical formulas at https://brainly.com/question/11574373

#SPJ11

The link that represents the break in the chain of infection in this scenario, placing you at risk of contracting the infection is the Port of entry.

The worker is coughing and sneezing without covering his nose and mouth, which allows the infectious agents to enter the body of others nearby. The Port of entry is the point at which the infectious agents enter the susceptible host, and in this case, it is through inhalation of respiratory droplets from the sick worker. This highlights the importance of proper hygiene practices, such as covering your nose and mouth when coughing or sneezing, to prevent the spread of infectious diseases in the workplace.

Know more about Infection here:

https://brainly.com/question/30759550

#SPJ11

The rate of production of the final product is 0.3 t/h, and the composition of the final product is approximately 12.5% alcohol and 12% water, with no inert material present.

In an ethanol plant, the distillation process separates alcohol from corn. With a feed rate of 2.0 tons per hour, the bottoms waste contains 85% of the feed, while the final product is obtained from condensing and cooling the vapor.

To determine the rate of production of the final product and its composition, we need to calculate the mass flow rate of the final product and the composition of the final product.

Given:

Feed rate = 2.0 t/h

Composition of feed:

Alcohol: 15%

Water: 82%

Inert material: (100% - 15% - 82%) = 3%

Bottoms composition:

Water: 94%

Inert material: 3.5%

Alcohol: 2.5%

To calculate the rate of production of the final product, we need to subtract the mass of bottoms produced from the feed rate:

Rate of production of the final product = Feed rate - Mass of bottoms

Mass of bottoms = Feed rate × Bottoms composition = 2.0 t/h × 85% = 1.7 t/h

Rate of production of the final product = 2.0 t/h - 1.7 t/h = 0.3 t/h

Therefore, the rate of production of the final product is 0.3 tons per hour.

To calculate the composition of the final product, we need to consider the remaining components after removing the bottoms:

Composition of final product:

Alcohol: 15% - 2.5% = 12.5%

Water: 82% - 94% = 12%

Inert material: 3% - 3.5% = -0.5% (Assuming a negative value means there is no inert material remaining)

Therefore, the composition of the final product is approximately:

Alcohol: 12.5%

Water: 12%

No inert material

Please note that the negative value for the inert material indicates that there is no inert material present in the final product.

To know more about the ethanol plant refer here :

https://brainly.com/question/15646255#

#SPJ11

We need to add 7.7 g of solid iron(II) nitrate to make a 0.172 M solution in 250 mL volumetric flask.

First, we can use molarity and volume of solution to find the number of moles of iron(II) nitrate needed:

moles of [tex]Fe(NO_3)_2[/tex]= Molarity × Volume in liters

moles of [tex]Fe(NO_3)_2[/tex] = 0.172 mol/L × 0.250 L = 0.043 mol

Next, we can use the molar mass of iron(II) nitrate to find the mass of the solid that needs to be added:

mass of [tex]Fe(NO_3)_2[/tex] = moles of [tex]Fe(NO_3)_2[/tex] × molar mass of [tex]Fe(NO_3)_2[/tex]

mass of [tex]Fe(NO_3)_2[/tex]= 0.043 mol × (55.85 g/mol + 2 × 14.01 g/mol + 6 × 16.00 g/mol)

mass of [tex]Fe(NO_3)_2[/tex]= 0.043 mol × 179.86 g/mol = 7.7 g

To know more about volumetric flask, here

brainly.com/question/19517011

#SPJ1

Answer:

Yes, radioactive decay will change the identity of an atom.

Explanation:

This is because the radioactive decay involves the emission of particles that change the number of protons in the nucleus. The number of protons is what determines the identity of the atom.

Answer:

in most instances, the atom changes its identity to become a new element

Explanation:

Here are the condensed formulas for each alkyl group, with the number of number of carbons:

1. Methyl (1 carbon): CH3-
2. Ethyl (2 carbons): CH3CH2-
3. Propyl (3 carbons): CH3CH2CH2-
4. Butyl (4 carbons): CH3(CH2)3-
5. Pentyl (5 carbons): CH3(CH2)4-
6. Hexyl (6 carbons): CH3(CH2)5-
7. Heptyl (7 carbons): CH3(CH2)6-
8. Octyl (8 carbons): CH3(CH2)7-
9. Nonyl (9 carbons): CH3(CH2)8-
10. Decyl (10 carbons): CH3(CH2)9-
11. Undecyl (11 carbons): CH3(CH2)10-
12. Dodecyl (12 carbons): CH3(CH2)11-

These formulas represent alkyl groups, which are fragments of alkane molecules with one hydrogen atom removed. They can attach to other molecules and form various organic compounds.

Know more about Alkyl Group here:

https://brainly.com/question/30896901

#SPJ11

The strongest type of intermolecular forces present between the hydrocarbon chains of neighboring stearic acid molecules is van der Waals forces, specifically London dispersion forces.

These forces arise due to temporary fluctuations in electron distribution, causing momentary dipoles that attract adjacent molecules.

Stearic acid is a long-chain fatty acid consisting of a hydrocarbon chain (nonpolar) and a carboxylic acid functional group (polar). The hydrocarbon chains in stearic acid are composed of carbon and hydrogen atoms, resulting in a relatively nonpolar nature.

London dispersion forces, also known as instantaneous dipole-induced dipole interactions, are intermolecular forces that occur between all molecules, including nonpolar molecules like stearic acid.

These forces arise due to temporary fluctuations in the electron distribution around atoms or molecules, leading to the formation of temporary dipoles.

In the case of stearic acid, the temporary dipole moment that arises in one molecule induces a corresponding dipole in the neighboring molecule, creating an attractive force between them.

These temporary dipoles result from the uneven distribution of electrons at any given moment, leading to the establishment of temporary positive and negative charges.

The strength of London dispersion forces depends on factors such as the size of the molecules involved and the ease of electron movement within them.

In the hydrocarbon chains of stearic acid, the presence of a large number of carbon atoms increases the surface area available for intermolecular interactions, making the London dispersion forces relatively stronger.

To learn more about hydrocarbon, refer below:

https://brainly.com/question/31643106

#SPJ11

I would expect a C24 molecule to boil at a higher temperature than a C8 molecule.

The boiling point of a molecule depends on the strength of intermolecular forces between the individual molecules. Intermolecular forces are forces that exist between molecules and they include dipole-dipole forces, hydrogen bonding, London dispersion forces, and ion-dipole forces.

This is because the boiling point of a molecule is directly related to its size and the strength of its intermolecular forces. A larger molecule such as C24 has more electrons and a larger surface area, which results in stronger intermolecular forces such as London dispersion forces.

These stronger forces require more energy to be overcome and thus result in a higher boiling point. In contrast, a smaller molecule such as C8 has weaker intermolecular forces and requires less energy to overcome them, resulting in a lower boiling point.

Read more about temperature  here:

https://brainly.com/question/25677592

#SPJ1

To solve this problem, we can use the formula:

q = m * c * ΔT

where q is the heat energy absorbed or released, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We know that the heat energy released by the iron is 2432 J, the specific heat capacity of iron is 0.448 J/g°C, the initial temperature of the iron is 25.0°C, and the final temperature of the iron is 87.0°C.

The mass of iron that releases 2432 J of energy as its temperature rises from 25.0°C to 87.0°C is 96.2 g.

Substituting the values in the formula, we get:

2432 J = m * 0.448 J/g°C * (87.0°C - 25.0°C)

Simplifying the equation, we get:

m = 2432 J / (0.448 J/g°C * 62.0°C)

m = 96.2 g

Therefore, the mass of iron that releases 2432 J of energy as its temperature rises from 25.0°C to 87.0°C is 96.2 g.

To know more about temperature rise refer here:

https://brainly.com/question/2006890

#SPJ11

A single compound decomposes into two or more smaller compounds or components during a decomposition reaction. Option D

A number of mechanisms, such as heat, light, or the addition of another molecule, can cause this. A significant quantity of potential energy is often held in the chemical bonds of the reactant component, and this energy is released during the reaction.

For instance, hydrogen peroxide's typical breakdown reaction involves the molecule dissolving into water and oxygen gas:

[tex]2H_2O_2 \rightarrow 2 H_2O + O_2[/tex]

The heat breakdown of calcium carbonate to produce calcium oxide and carbon dioxide gas is another illustration:

[tex]CaO + CO_2 = CaCO_3[/tex]

Decomposition reactions are crucial components of several chemical processes in both nature and industry. They are characterised by the dissolution of bigger molecules into smaller ones. Option D

For more such questions on Decomposition reactions

https://brainly.com/question/14608831

The new volume of gas is 6.62 L when the pressure changes from 735 mmHg to 800 mmHg at a constant temperature.

According to Boyle's Law, at a constant temperature, the pressure and volume of a gas are inversely proportional. This means that as the pressure of the gas increases, its volume decreases, and vice versa. Therefore, we can use this law to find the new volume of gas when the pressure changes from 735 mmHg to 800 mmHg.

Using the formula P1V1 = P2V2, where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume, we can solve for V2.

Plugging in the values given in the question, we get:

735 mmHg x 7.2 L = 800 mmHg x V2

Solving for V2, we get:

V2 = (735 mmHg x 7.2 L) / 800 mmHg

V2 = 6.62 L

Therefore, the new volume of gas is 6.62 L when the pressure changes from 735 mmHg to 800 mmHg at a constant temperature.

To know more about pressure, visit:

https://brainly.com/question/18431008#

#SPJ11