Answer:
s=1/2at^2
s=1/2 x 4 x(10)^2=200m
The work done per unit volume is?
Answer:
hahsbahbavbsbsbaba avabshshshbabahsjsjajajjajajjajjaja
Within which type of system is the total energy conserved?
A. Isolated
B. Connected
C. Closed
D. Open
The total energy is conserved within isolated system.
How is energy conserved in an isolated system?In an isolated system, there is no exchange of matter or energy with the surroundings. Therefore, the total energy within the system remains constant, meaning that energy is conserved within the system.
In contrast, in an open system, there can be an exchange of both matter and energy with the surroundings, so the total energy within the system is not necessarily conserved.
In a closed system, there can be an exchange of energy but not matter, so the total energy within the system is conserved as long as there is no work being done by or on the system. In a connected system, the term is not commonly used in the context of energy conservation.
Learn about isolated system here https://brainly.com/question/17580023
#SPJ1
g A nucleus of mass M (given) at rest emits an alpha particle. The kinetic energy of the alpha particle is K1 (given). The mass of the alpha particle is given (m1) and the mass of the daughter nucleus is also given (m2). a) write the nuclear reaction equation; b) express the kinetic energy of the daughter nucleus in terms of the given quantities c) express the Q factor of this reaction in terms of the given quantities.
Answer:
Following are the responses to the given question:
Explanation:
In point a:
Nucleus denoting, he refers to those same nuclei of the helium ( that is alpha particle)
[tex]{z}^{N^{A}}\to z-2^{N^{A-4}} + 2^{He^{4}}[/tex]
In point b:
Let the kinetic energy of [tex]\alpha[/tex] particle = [tex]K_1[/tex]
[tex]\to K_1 = \frac{mass \times (velocity)^2}{2}[/tex]
The velocity of [tex]\alpha[/tex] particle [tex](v_1)= (2 \times \frac{k_1}{m_1})^\frac{1}{2}[/tex]
Let daughter core velocity be =[tex]v_2[/tex]
Preserving linear acceleration since there was no external factor we can write
[tex]\to m_2 \times v_2 = m_1 \times v_1\\\\\to v_2 = \frac{m_1\times v_1}{m_2}\\\\\to v_2 = \frac{m_1\times (2 \times \frac{k_1}{m_1})^{\frac{1}{2}}}{m_2}[/tex]
Daughter nuclei energy can be written as:
[tex]\to \frac{mass \times (velocity)^2}{2}\\\\\to \frac{m_2 \times (m_1)^2 \times 2 \times k_1}{(2\times m_1 \times (m_2)^2)}\\\\ \to (\frac{m_1}{m_2}) \times k_1[/tex]
In point c:
Initial weight = M
Total product weight [tex]= m_1 + m_2[/tex]
You can use the total release energy (Q-factor) as =[tex](M - (m_1+m_2)) c^2[/tex]
Evidence supporting the humanistic perspective is easily measured. True or false?
Answer:
False
Explanation:
I believe it's false.
Evidence not supporting the humanistic perspective is easily measured. So, the given statement is False.
What is an Evidence?Evidence is defined as an object or information introduced to make the existence of a fact more or less probable that of testimony, document, photograph, video, voice recording, DNA test, or other tangible objects. can take form.
Evidence is used to prove an argument made by individuals or groups that believe something is true or a fact that can be used to refute or disprove a fact or argument that people disagree with, or considered false.
Thus, Evidence not supporting the humanistic perspective is easily measured. So, the given statement is False.
Learn more about Evidence, here:
https://brainly.com/question/14370298
#SPJ6
2.A child moving at constant velocity LIFTS a 2 N ice-cream to the top
shelf of a refrigerator. Is work being done?
O a. No
O b. Yes
How to explain third law when a boat is moving away from a paddock when a women’s feet is on the paddock and the boat
Answer:
According to Newton's third law of motion, for every action, there is an equal and opposite reaction. When the man jumps from a boat, he applies force on the boat due to which boat moves backward. An equal force is exerted by the boat on the man which helps the man to jump out of the boat.
Rupert is investigating the properties of a light (effectively massless) spring. He has attached one end of the spring to a fixed horizontal rod and allowed the spring to hang vertically. The free end of the spring has a small hook to which Rupert can attach various masses. An Experiment to Determine the Spring Constant Part A Rupert finds that if he attaches a 470.0 gram mass to the hook, and then very slowly lowers the mass with his hand until the force on the mass by the spring is as large as the weight of the mass, that the spring stretches by 36.0 cm . What is the spring constant of Rupert's spring
Answer:
Explanation:
For equilibrium ,
weight of mass 470 gram = restoring force in spring
If x be extension in spring and k be spring constant
restoring force = kx
weight of mass = kx
.47 x 9.8 = k x .36
k = 12.8 N /m.
The force of friction depends upon
Answer:
ask internet?
Explanation:
easy .....
..
A cylindrical tank with radius 3 m is being filled with water at a rate of 2 m3/min. How fast is the height of the water increasing (in m/min)
Answer:
.0707 m / min
Explanation:
The computation is shown below:
= Flow of the volume ÷ crossectional area
A = π × r^2
= 9 π
= 28.27 m^2
so, the fast of the height of the water rise is
=(2 m^3 / min) ÷ 28.27 m^2
= .0707 m / min
27. The electric field around a positive charge is shown in the diagram. Describe the nature of these lines. Please use 2 content related sentences
Answer:
Once we place a positive test at a point close to the sphere, we find that an electrostatic force is applied to the outside of the sphere. Therefore, at any point around the sphere, the electric field vector is radially outward.
PLEASE HELP!!!
Thunder is a sound wave created
by a lightning strike. If it travels at
343 m/s, how much time does it
take to travel a mile (1610 m)?
(Unit = s)
Answer:
t = 9.38 s
Explanation:
Given that,
The speed of the sound wave, v = 343 m/s
Distance, d = 1610 m
We need to find the time taken to travel a mile. The distance traveled by the sound is 2d. Using the formula for speed,
[tex]v=\dfrac{2d}{t}[/tex]
t is the time taken to travel a mile
So,
[tex]t=\dfrac{2d}{v}\\\\t=\dfrac{2\times 1610}{343}\\\\t=9.38\ s[/tex]
So, it will take 9.38 seconds.
Answer:
4.69s
Explanation:
The formula to find time is time = distance / velocity
Plug the numbers into the formula
So
1610 / 343
= 4.69s
3. Which of the following processes provides the water necessary for human consumption?
O precipitation
O evaporation
O sublimation
O perspiration
Answer:
precipitation is the answer..
Explanation:
precipitation is any product of the condensation of atmospheric water vapor that falls under gravitational pull from clouds. The main forms of precipitation include drizzling, rain, sleet, snow, ice pellets, graupel and hail.
10. A 50 kg bicyclist on a 10 kg bicycle speeds up from 5.0 m/s to 10 m/s.
(a) What was the total kinetic energy before accelerating? Full working out
Answer:
T.K.E = 750 Joules.
Explanation:
Given the following data;
Initial velocity, u = 5m/s
Final velocity, v = 10m/s
Mass of bicyclist = 50kg
Mass of bicycle = 10kg
Total mass, Tm = 50 + 10 = 60kg
Kinetic energy can be defined as an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}mv^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
m represents mass measured in kilograms.
v represents velocity measured in metres per seconds square.
To find the total kinetic energy before accelerating simply means the kinetic energy due to the initial velocity and total mass;
[tex] T.K.E = \frac{1}{2}T_{m}U^{2}[/tex]
Substituting into the equation, we have;
[tex] T.K.E = \frac{1}{2}*60*5^{2}[/tex]
[tex] T.K.E = 30*25 [/tex]
T.K.E = 750 Joules.
I need help with 6 and 7 please help?
Answer:
6-a . 7-c
Explanation:
Outline 3 disadvantages and advantage of water and alcohol as a template liquid
Answer:
Advantages of mercury as a thermometric liquid.
-It is a good conductor of heat and therefore the whole liquid reaches the temperature of the surroundings quickly.
-It does not wet (cling to the sides of) the tube.
-It has a high boiling point
-It expands uniformly (linear expansion) and responds quickly to temperature changes, hence is sensitive.
-It has a visible meniscus.
Disadvantages
-Mercury is very poisonous.
-its expansively is fairly low
-it is expensive
-It has a high freezing point therefore it cannot be used in places where the temperature gets very low.
Alcohol has a thermometric fluid
-Alcohol expands uniformly.
-It has a low freezing point (-115 degreecentigrade) therefore it is very suitable for place where the temperature gets very low.
-It has a large expansively
-It is an easily available cheap liquid, which is safe to use
Disadvantages of alcohol
-it wets the tube
-it has a low boiling point (cannot be used in places with high temperatures)
-it does not react quickly to changes in temperature
-It needs to be dyed, since it's colourless.
Disadvantages of water
-Water has high specific heat capacity. So it cannot be used for measuring small temperature differences.
- Water will wet the surface of the glass tube. It is a sticky substance.
- Water is transparent
Explanation:
What could you do to increase the electric potential energy between two
negatively charged particles by a factor of 16?
O A. Increase the charge of one particle by a factor of 4.
B. Reduce the charge of one particle by a factor of 4.
C. Increase the charge of one particle by a factor of 16.
O D. Reduce the charge of one particle by a factor of 16.
Answer: Increase the charge of one particle by a factor of 16
Explanation:Just took the quiz
Answer:
C. Increase the charge of one particle by a factor of 16.
A car of mass 1800 kg can be just be lifted. What is the least force that the electromagnet must use to lift the car? (1 g = 10 N/kg)
Answer:
f=a×mm=1800kg
1800000g×10N/kg
18000000N force is required to life the car
The gravitational strength at the poles is greater than the gravitational strength at the equator. What will happen to an object when it moves from the poles to the equator? Group of answer choices A. Its mass will increase. B. Its mass will decrease. C. Its weight will increase. D. Its weight will decrease.
Answer:
C
Explanation:
Because this same question was on my test last week and I got it correct
1. Why is the flow of electrons from A to B?
2. What's the difference between flow of current & flow of electrons and why ar they opposite?
1. because A is more negative than B. A is -1000 V (we can imagine that A has excess 1000 electrons), in other, B which +3000 V can be assume that B need 3000 elctrons to be neutral. So, the electron will flow from A to B.
2. Electrons being negatively charged flow from the negative terminal to the positive terminal of the voltage source. So, the actual direction of current should be from negative to positive terminal. However, the conventional direction had already been established. So, the current flow is considered in the direction opposite to the direction of flow of electrons. (from topperlearning dot com)
A planet follows an elliptical orbit that brings it as close as 21 million km to a star and as far as 75 million km from the star. At both of these locations the velocity of the planet makes a right angle to the direction to the star. If the planet's speed is 38 km/s when it is farthest from the star, how fast is it moving when it is closest to the star
Answer:
Explanation:
In an elliptical orbit , the angular momentum of the planet remains constant because velocity of planet makes a right angle to the direction to the star .
mvr = constant .
mv₁r₁ = mv₂r₂
v₁r₁ = v₂r₂
v₁ x 21 = 38 x 75
v₁ = 135.71 km/s .
A barrel contains 285 kg of water.
What is the volume of the water?
(Unit = m^3)
Answer:
285 Litre ( 1kg of water occupies 1 Litre )
which is identical to 285 dm^3 ie 285 cubes of length 10 cm
and as there are 10 of these linearly in 1 m then there are 10^3 = 1000 dm^3 in each m^3
giving a volume of 0.285 m^3
Of course if you KNEW that 1m^3 of water has a mass of 1000 kg then you would simply have said that the volume was 285/1000 m^3
The volume of the water will be 0.285 [tex]m^{3}[/tex]
What is volume ?A volume is simply defined as the amount of space occupied by any three-dimensional solid. These solids can be a cube, a cuboid, a cone, a cylinder or a sphere. Different shapes have different volumes. Volume is the measure of the capacity that an object holds.
A method in which the value of the unit (one) quantity is first obtained to find the value of any required quantity is called the unitary method. So , by finding the value volume of 1 kg water , we can find the volume of 285 kg water by simply multiplying it with the volume of 1kg water using unitary method
using unitary method
1000 kg of mass have volume of = 1[tex]m^{3}[/tex]
then , the volume of 1kg will be = 1 / 1000 [tex]m^{3}[/tex]
The volume of 285 kg will be = (1 / 1000) * 285 = 0.285 [tex]m^{3}[/tex]
Hence if a barrel contains 285 kg of water, then the volume of the water will be 0.285 [tex]m^{3}[/tex]
To learn more about volume here
https://brainly.com/question/13338592?referrer=searchResults
#SPJ2
Consider the following water circuit: water is continually pumped to high pressure by a pump, and then funnelled into a pipe that has lower pressure at its far end (else the water would not flow through the pipe) and back to the pump. Two such circuits are identical, except for one difference: the pipes in one circuit have a larger diameter than the pipes in the other circuit. Through which circuit is the flow of water greater
Answer:
The circuit with the larger diameter pipes will have higher water flow.
Explanation:
The flow rate can be calculated with this formula, [tex]Q = v.A[/tex] , where [tex]v[/tex] is the velocity of the water flow and [tex]A[/tex] is the cross-sectional area of the pipe. Considering the two circuits are identical except only for the diameter of the pipes, the flow of water will be greater through the circuit with the larger diameter pipes. It will be proportional with respect to the square of the pipe's diameter.
I hope this answer helps.
Rank the following circuits in order from highest to lowest values of the current in the circuit.
i. a 1.4-Ω resistor connected to a 1.5-V battery that has an internal resistance of 0.10 Ω;
ii. a 1.8-Ω resistor connected to a 4.0-V battery that has a terminal voltage of 3.6 V but an unknown internal resistance;
iii. an unknown resistor connected to a 12.0-V battery that has an internal resistance of 0.20 Ω and a terminal voltage of 11.0 V.
a. (i), (iii), (ii)
b. (iii), (i), (ii)
c. (ii), (iii), (i)
d. (i), (ii), (iii)
e. (iii), (ii), (i)
f. (ii), (i), (iii)
Answer:
e)
Explanation:
Let's get first the values of the currents for the three cases.i)
The battery forms a series circuit with its internal resistance and the 1.4 Ω resistor. Since the current is the same at any point of the circuit, and the sum of all voltages along a closed circuit must be zero, we can apply Ohm's Law in each resistor, as follows:[tex]V = I*r_{i} + I*R_{1} (1)[/tex]
Replacing V, ri and R₁ by their values, we can solve for the current I as follows:[tex]I_{i} = \frac{V}{r_{int} + R_{i}} = \frac{1.5V}{0.1 \Omega + 1.4 \Omega} = 1.0 A (2)[/tex]
ii)
Since the voltage of the battery is 4.0 V (open circuit voltage), and it falls to 3.6 V when is connected to a 1.8Ω resistor, this means that the voltage through the resistor must be 3.6 V, due to the sum of all voltages along a closed circuit must be zero.So, we can find the current through the circuit, applying Ohm's Law to the 1.8Ω resistor, as follows:[tex]I_{ii} =\frac{V_{term} }{R_{ii} } =\frac{3.6V}{1.8 \Omega} = 2.0 A (3)[/tex]
iii)
Since the 12.0 V battery has a terminal voltage of 11.0 , this means that the voltage through the internal resistance of 0.2 Ω, must be 1.0 V.So we can find the current Iiii, applying Ohm's Law to the internal resistance value, as follows:[tex]I_{iii} =\frac{V-V_{term}}{r_{int} } =\frac{12.0 V- 11.0 V}{0.2 \Omega} =\frac{1.0V}{0.2\Omega} = 5.0 A (4)[/tex]
So, the highest current is the Iiii, followed by Iii and Ii, which is stated by e).A 70 ft rope hangs from a helicopter above this room. The rope has a mass per unit length of 2 lb/ft. In order to be rescued from this exam the helicopter must pull you up and out of the room to safety. Assume that you weigh 120 lbs. How much work will it take get you safely away from this test
Answer:
The work done to get you safely away from the test is 2.47 X 10⁴ J.
Explanation:
Given;
length of the rope, L = 70 ft
mass per unit length of the rope, μ = 2 lb/ft
your mass, W = 120 lbs
mass of the 70 ft rope = 2 lb/ft x 70 ft
= 140 lbs.
Total mass to be pulled to the helicopter, M = 120 lbs + 140 lbs
= 260 lbs
The work done is calculated from work-energy theorem as follows;
W = Mgh
where;
g is acceleration due gravity = 32.17 ft/s²
h is height the total mass is raised = length of the rope = 70 ft
W = 260 Lb x 32.17 ft/s² x 70 ft
W = 585494 lb.ft²/s²
1 lb.ft²/s² = 0.0421 J
W = 585494 lb.ft²/s² = 2.47 X 10⁴ J.
Therefore, the work done to get you safely away from the test is 2.47 X 10⁴ J.
Can you help me please here is the picture DUE NOW PLEASE.
they are formed when hot
it's dependent on the rate of cooling of the melt, slow cooling allows large crystals to form, fast cooling yields small crystals. They cool too quickly to form crystals.
Hope this helps! <3 :3
A sound having a frequency of 299 Hz travels through air at 332 m/s.
What is the wavelength of the sound? Answer in units of m.
Answer:
1.11 m.
Explanation:
Why?
The speed for a wave is done by the equation: v = f * w. Because the frecuency tells us about how many cycles the wave makes each time, but for each cycle the wave runs certain distance, given for the wavelenght. If you isolate the letter w you get the value just doing a ratio.
v = speed
f = frecuency
w = wavelenght
w = v / f
In certain cases, using both the momentum principle and energy principle to analyze a system is useful, as they each can reveal different information. You will use the both momentum principle and the energy principle in this problem.
A satellite of mass 3500 kg orbits the Earth in a circular orbit of radius of 7.3 106 m (this is above the Earth's atmosphere).The mass of the Earth is 6.0 1024 kg.
What is the magnitude of the gravitational force on the satellite due to the earth?
F= ________N
Using the momentum principle, find the speed of the satellite in orbit. (HINT: Think about the components of (dp^^\->)\/(dt) parallel and perpendicular to p^^\->.)
v = ________ m/s
Using the energy principle, find the minimum amount of work needed to move the satellite from this orbit to a location very far away from the Earth. (You can think of this energy as being supplied by work due to something outside of the system of the Earth and the satellite.)
work= ________J
Answer:
A) F_g = 26284.48 N
B) v = 7404.18 m/s
C) E = 19.19 × 10^(10) J
Explanation:
We are given;
Mass of satellite; m = 3500 kg
Mass of the earth; M = 6 x 10²⁴ Kg
Earth circular orbit radius; R = 7.3 x 10⁶ m
A) Formula for the gravitational force is;
F_g = GmM/r²
Where G is gravitational constant = 6.67 × 10^(-11) N.m²/kg²
Plugging in the relevant values, we have;
F_g = (6.67 × 10^(-11) × 3500 × 6 x 10²⁴)/(7.3 x 10⁶)²
F_g = 26284.48 N
B) From the momentum principle, we have that the gravitational force is equal to the centripetal force.
Thus;
GmM/r² = mv²/r
Making v th subject, we have;
v = √(GM/r)
Plugging in the relevant values;
v = √(6.67 × 10^(-11) × 6 x 10²⁴)/(7.3 x 10⁶))
v = 7404.18 m/s
C) From the energy principle, the minimum amount of work is given by;
E = (GmM/r) - ½mv²
Plugging in the relevant values;
E = [(6.67 × 10^(-11) × 3500 × 6 × 10²⁴)/(7.3 x 10⁶)] - (½ × 3500 × 7404.18)
E = 19.19 × 10^(10) J
Which phrase best completes the diagram?
Role of the Federal Reserve in the U.S. economy:
Sets interest rates➡️?➡️Loans money to other banks
A. Approves the federal budget.
B. Votes on coporate regulations.
C. Sets the consumer price index.
D. Makes rules for other banks.
Correct answer is:
D. Makes rules for other banks.
Answer:
B
Explanation:
i think
Answer:
D. makes rules for other banks
Explanation:
A car starting from rest is accelerated uniformly to a velocity of 100.8km/h. Convert this to metre per secondphy
Explanation:
100.8 km/h × (1000 m/km) × (1 h / 3600 s) = 28 m/s
Answer:
28 m/s
Explanation:
100.8km/hr * 1hr/3600sec* 1000m/km= 100.8*1000/3600 m/s
Identify equivalent terms for stored energy and energy of motion.
a. Stored energy is potential energy, and energy of motion is kinetic energy.
b. Energy of motion is potential energy, and stored energy is kinetic energy.
c. Stored energy is the potential as well as the kinetic energy of the system.
d. Energy of motion is the potential as well as the kinetic energy of the system.
Answer:
a. Stored energy is potential energy, and energy of motion is kinetic energy
Explanation:
The correct option is - a. Stored energy is potential energy, and energy of motion is kinetic energy.
Reason -
Potential energy is stored energy, whereas kinetic energy is the energy of moving things.
Kinetic energy is energy possessed by an object in motion.The energy associated with position is called potential energy .