Answer:
108 is the correct answer
Part A
Calculate the spring constant.
• Look at the graph of x vs. t graph. (You may want to double-click on
it to examine it in the Data Tool view.)
. From the graph, determine the period T.
• The first video frame lists the mass.
• Use the equation below to solve for the spring constant k. Show
your work below.
m
T = 2π√√T
Answer:
Using 3 periods to get an accurate reading:
3T = (6.40 S - 0.90 s) = 5.50 S So, T = 1.83 s
m = 0.250 kg
Using algebra:
k= [tex]\frac{4\pi ^{2}m }{T^{2} }[/tex]=[tex]\frac{4\pi ^{2}0.250 }{1.90^{2} }[/tex]=2.95kg/sec
n Step 5, you will calculate H+/OH– ratios for more extreme pH solutions. Find the concentration of H+ ions to OH– ions listed in Table B of your Student Guide for a solution at a pH = 2. Then divide the H+ concentration by the OH– concentration. Record these concentrations and ratio in Table C.
What is the concentration of H+ ions at a pH = 2?
mol/L
What is the concentration of OH– ions at a pH = 2?
mol/L
What is the ratio of H+ ions to OH– ions at a pH = 2?
: 1
At pH = 2 the ratio of the concentration of the hydrogen to the hydroxide ion is 10¹⁰. The hydrogen ion concentration at pH, 2 is 10⁻² and the hydroxide ion is 10⁻¹².
What is pH?The parameter of measuring the concentration of the hydroxide and the hydrogen ion in the solution in order to determine the basic and the acidic nature is known as pH.
The concentration of H⁺ ions is calculated as:
pH = -log [H⁺]
2 = -log [H⁺]
[H⁺] = 10⁻²
The concentration of OH⁻ ions is calculated as:
pH + pOH = 14
pOH = 14 - 2
pOH = 12
Solving further:
pOH = -log [OH⁻]
12 =-log [OH⁻]
[OH⁻] = 10⁻¹²
At a pH = 2, the ratio of hydrogen ions to hydroxide ions:
10⁻² ÷ 10⁻¹² = 10¹⁰
Therefore, at pH = 2 the ratio is 10¹⁰.
Learn more about pH here:
https://brainly.com/question/20438548
#SPJ1
A cannonball is shot horizontally off a high castle wall at 47.4 m/s. What is the magnitude of the cannonball's velocity after 1.23 s? (Ignore direction)
The magnitude of the cannonball's velocity after 1.23 s will be 59.46 m/sec.
What is velocity?The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.
The given data in the problem is
u is the initial velocity of canonball= 47.4 m/sec
g is the acceleration of free fall = 9.81 m/sec²
v is the velocity after 1.23 s
According to Newton's first equation of motion,
[tex]\rm v=u +gt \\\\ v= 47.4 \ m/sec + 9.81 \ m/sec^2 \times 1.23 sec \\\\\ v=59.46 \ m/sec[/tex]
Hence, the magnitude of the cannonball's velocity after 1.23 s will be 59.46 m/sec.
To learn more about the velocity, refer to the link: https://brainly.com/question/862972.
#SPJ1
Which statement about the accuracy and precision of measuring tools is
true?
OA. A tool can be both accurate and precise.
о B. Tools that are precise must also be accurate.
о C. Tools cannot be both accurate and precise.
O D. A tool that is accurate lacks precision.
The true statement about the accuracy and precision of measuring tools is Tools cannot be both accurate and precise. The correct option is C.
What is accuracy?When in an experiment, a value is measured 5 times, then if the values measured are same for most of the time or like three times out of five, it said to be accurate. The phenomenon is accuracy.
Precision is about comparing the values to each other then find them near to each other.
Accuracy compares the experimental value to the theoretical value.
So, when all the values are close to each other but not nearest to the theoretical value, then it is said to be precise but not accurate.
Thus, the correct option is C.
Learn more about accuracy.
https://brainly.com/question/13099041
#SPJ1
the temprerture of an object is 40°c.what is this tempreture in farhenhite scale?
This is an exercise of thermal scales.
Data:T = 40 °C
T = °F ¿?
To convert degrees Celsius to degrees Fahrenheit, we have the formula:
[tex]\bf{^{\circ}F=\dfrac{9}{5} \ ^{\circ}C+32 \ \ \to \ \ \ Formula }[/tex]
We substitute our data into the formula.
[tex]\bf{^{\circ}F=\dfrac{9}{5} \times 40+32}[/tex]
First we divide 9/5 multiplied by 40.
[tex]\bf{=75+32}[/tex]
Add 75 plus 32
[tex]\bf{=104 \ ^{\circ}F}[/tex]
Therefore, the temperature change of 40 °C on the °F scale is equal to 104.
[tex]\huge \red{\boxed{\green{\boxed{\boldsymbol{\purple{Piscis04}}}}}}[/tex]
In a recent study of how mice negotiate turns, the mice ran around a circular 90∘ turn on a track with a radius of 0.10 m. The maximum speed measured for a mouse (mass = 18.5 g) running around this turn was 1.39 m/s. Part A What is the minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed?
The minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed without sleeping is 1.97.
Minimum coefficient of frictionThe minimum coefficient of friction is calculated as follows;
F = μmg = mac
μmg = mac
where;
ac is centripetal accelerationμg = ac
μg = v²/r
μ = v²/rg
where;
μ is the minimum coefficient of frictionv is velocityr is radius of the pathg is acceleration due to gravityμ = (1.39²)/(0.1 x 9.8)
μ = 1.97
Thus, the minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed without sleeping is 1.97.
Learn more about minimum coefficient of friction here: https://brainly.com/question/23971360
#SPJ1
imagine your lifting a toy car above your head and then holding it stationary above your head. While it is stationary what forces do you think act on the toy car
Gravity and normal forces act on the toy car.
What is force?A push or pull that an object experiences as a result of interacting with another item are known as a force. Every time two items interact, a force is exerted on each of the objects. The force is no longer felt by the two objects when the interaction ends. Only when there is interaction do forces actually exist.Both contact forces and forces coming from the action at a distance can be used to categorize all forces (interactions) between objects.Frictional forces, tensional forces, normal forces, air resistance forces, and applied forces are a few examples of contact forces.Gravitational forces are examples of action-at-a-distance forces.The standard metric unit known as the Newton is used to quantify force. "N" stands for Newton in abbreviation.To learn more about force refer to:
https://brainly.com/question/13191643
#SPJ10
Aude slipped on ice going 7.6 m/s .What was her velocity before she hit the wal?
Answer:
Define universal gravitational constant. Why is newton's law of gravitation called universal law?
A 3,204 kg tree positioned on the edge of a cliff 247 m above the ground breaks away and falls into the valley below which is considered zero potential energy. If the tree’s mechanical energy is conserved, what is the speed of the tree just before it hits the ground in meters/sec?
Let's see
PE is turned to KE as per law of conservation of energy[tex]\\ \rm\Rrightarrow mgh=\dfrac{1}{2}mv^2[/tex]
[tex]\\ \rm\Rrightarrow 2gh=v^2[/tex]
[tex]\\ \rm\Rrightarrow 2(10)(247)=v^2[/tex]
[tex]\\ \rm\Rrightarrow v²=4940[/tex]
[tex]\\ \rm\Rrightarrow v=70.3ms^{-1}[/tex]
The value of acceleration due to gravity (g) on Pluto is about 0.61 meters/second2. How much will an object that weighs 250 newtons on Earth weigh on Pluto? Note that the value of acceleration due to gravity on Earth is 9.8 meters/second2.
The weight of an object on pluto will be 15.56. Mass multiplied by the gravitational acceleration gives weight.
What is gravitation?Gravitation is a natural law by which all things with all matter are attracted towards one another. Gravity is responsible for large-scale structures present in the Universe.
By dividing the object's weight on Earth by 9.8 m/s², as illustrated below, one may calculate the object's mass.
m = 250 N / 9.8 m/s²
m = 25.51 kg
Multiply the acquired mass by Pluto's gravitational acceleration (g);
W = (25.51 kg) x (0.61 m/s²)
W = 15.56 N
Thus, the item will only be 15.56 N in weight.
To learn more about gravitation refer to the link;
https://brainly.com/question/3009841
#SPJ1
Answer: B.
15.6 newtons
Explanation: edmentum
Water's specific heat capacity is 4.184 J/(g · °C). How does this compare to the heat capacities of most common substances?
Answer:
Explanation:
Comment
It's high. It takes quite a bit of heat to get water to change its heat content. Most substances don't reach much more the 0.5 J/(gram*oC)
loade Brack Figure below show a circuit diagram of a device for controlling the temperature in a room. Explain how the Iron Heating element S loade Brack Figure below show a circuit diagram of a device for controlling the temperature in a room . Explain how the Iron Heating element S
Answer:
suna bro i am nepali and nepali are pro
DON'T ADD LINKS!
Imagine that a single cell below goes through four cell divisions.
How many cells are produced? To find out, draw the parent cell
and cells present after each division. Then write the number of
cells in the space below each drawing. (Hint: the number of cells
doubles with each division.)
Two, four, eight and sixteen cells are produced from first, second, third and fourth cell division respectively.
How many cells are produced?When the body cell passes through cell division process, it divides into two daughter cells. In the second cell division, two cells divides into four cells. In the third cell division, the four cells divides into eight cells. In the fourth cell division, the eight cells divides and sixteen cells are produced.
So we can conclude that two, four, eight and sixteen cells are produced from first, second, third and fourth cell division respectively.
Learn more about cell division here: https://brainly.com/question/796780
#SPJ1
A trolley is moving at constant speed in a friction compensated track. Some plasticine is dropped on the trolley and sticks on it. State with a reason what is observed about the motion of the trolley.
Answer:
Since the momentum of the body remains constant ( conserved) the trolley slows down (its velocity reduces) since its mass increases.
Which of the following can be contracted from contact with bloodborne pathogens?
HIV can be contracted from contact with bloodborne pathogens.
Other bloodborne diseases are HBV, malaria, syphilis and brucellosis
What are bloodborne pathogens?Bloodborne pathogens can be defined as those microorganisms or pathogenic organisms that cause disease and are present in human blood.
Blood borne pathogens can also be contacted through the following means
Se- xual contactNeedle contactIn conclusion; HIV can be contracted from contact with bloodborne pathogens.
Learn more about bloodborne pathogens:
https://brainly.com/question/13158004
#SPJ1
Using what you learned above, try to predict the missing entries in the table below. Use the simulation to check your answer and type in the correct answer.
there is no pic or whatever to show
What is the mass of an object if it has 915J of energy when it is 6.50m above the ground?
A.851kg
B0.0696kg
C.583kg
D.14.4kg
Answer:
D
Explanation:
GPE = mgh
GPE / gh = m
m = GPE/gh
m = 915 / 6.5 x 9.8
m = 915 / 63.7
m = 14.4kg
What is the gravitational potential energy of a 15.0kg object that is 5.00m above the ground relative to a point 8.00m above the ground?
-441J
735J
-735J
441J
Explanation:
an object's gravitational potential energy Eg is m×g×h where:
m=mass
g=9.8m/s²
h=height relative to the closest object below it (because it cannot potentially fall through it
so Eg = 15×9.8×5=735J
Question 3 of 15
Which statement describes an advantage of using nuclear fission to produce
electricity?
A. It uses a fuel made of atoms with large nuclei that will be
destroyed.
B. It is much more efficient than any other process used to generate
power.
C. It happens in large buildings that are expensive to build.
D. It produces radioactive waste products that must be stored safely.
Answer:
it is much more efficient than any other process to generate power
How many minutes would be required for a 300.0 W (i.e., power=energy per second=300 J/s)
immersion heater to heat 0.25 kg of water from 20.0°C to 100.0°C? (Note: The specific heat of water
is 4184 J/kg°C)
Hence, the time required is approximately equal to 4 minutes and 39 seconds.
Given, Power, P = 300 W= 300J/s
Power= Energy per second
Mass, m= 0.25 kg
Initial Temperature= 20.0°C
Final Temperature= 100.0°C
Temperature difference, T =( 100-20)°C= 80.0°C
Specific heat of water, S= 4184 J/kg°C
Energy can be represented as
E=mST
where E is the energy, m is the mass, S is the specific heat of water and T is the temperature difference.
As Energy can be written as the product of time and power, E=Pt
Pt=mST
So,
t=(msT)/P
t=(0.25×4184×80)/300
Time, t = 278.934 seconds= 4 minutes and 39 seconds.
Hence, 4 minutes and 39 seconds will be required for a 300.0 W immersion heater to heat 0.25 kg of water from 20.0°C to 100.0°C.
Learn more about heat energy here:
https://brainly.com/question/7541718
#SPJ10
A ball of mass 500g is dropped from a height 1.5m . It rebounds the floor and reached the height 1.2m. Calculate the impulse given to the bàll by the floor
The impulse given to the ball by the floor is 0.2865 kg.m/s.
What is impulse?The change in momentum is equal to the product of impact force applied while colliding and time for that impact.
Impulse F. t = m (Vf -Vi)
where, Vf is the final velocity and Vi is the initial velocity.
A ball of mass 500g is dropped from a height 1.5m . It rebounds the floor and reached the height 1.2m.
The initial velocity u = √2x 9.81 x 1.5 = 5.425 m/s
The final velocity v = √2x 9.81 x 1.2 = 4.852 m/s
Substitute the values into the expression, we get
Impulse = m(v- u)
Impulse=0.5 x (4.852- 5.425 )
Impulse = - 0.2865 kg.m/s
Thus, the magnitude of impulse given to the ball by the floor is 0.2865 kg.m/s.
Learn more about impulse.
https://brainly.com/question/16980676
#SPJ1
A projectile is fired at an upward angle of 45.0º from the top of a 265-m cliff with a speed of .sm 185 What will be its speed when it strikes the ground below? (Use conservation of energy.)
The final velocity of the projectile when it strikes the ground below is 198.51 m/s.
Time of motion of the projectileThe time taken for the projectile to fall to the ground is calculated as follows;
h = vt + ¹/₂gt²
where;
h is height of the cliffv is velocityt is time of motion265 = (185 x sin45)t + (0.5)(9.8)t²
265 = 130.8t + 4.9t²
4.9t² + 130.8t - 265 = 0
solve the quadratic equation using formula method,
t = 1.89 s
Final velocity of the projectilevyf = vyi + gt
where;
vyf is the final vertical velocityvyi is initial vertical velocityvyf = (185 x sin45) + (9.8 x 1.89)
vyf = 149.322 m/s
vxf = vxi
where;
vxf is the final horizontal velocityvxi is the initial horizontal velocityvxf = 185 x cos(45)
vxf = 130.8 m/s
vf = √(vyf² + vxf²)
where;
vf is the speed of the projectile when it strikes the ground belowvf = √(149.322² + 130.8²)
vf = 198.51 m/s
Learn more about final velocity here: https://brainly.com/question/6504879
#SPJ1
Guillaume Amontons first took a stab at measuring absolute zero in 1702. What would be the most reasonable way it would have been done then?
A) Measure the pressure of a gas in a container at various temperatures, say from 100 °C down to maybe −20 °C, then extrapolate to the temperature at which the pressure would reach zero.
B) Measure the speed of molecules as the temperature gets colder until the temperature is measured at which motion stops.
C) Measure the pressure of a gas and cool it until the pressure is zero.
He would measure the speed of molecules as the temperature gets colder until the temperature is measured at which motion stops(option A).
What is the absolute zero?The absolute zero refers to the temperature at which the gas seems to stop moving. Recall that temperature is the measure of the average kinetic energy of the molecules of a gas. We now have to consider the options and see the one that connects temperature and speed of molecules.
Hence, if Guillaume Amontons first took a stab at measuring absolute zero in 1702, he would measure the speed of molecules as the temperature gets colder until the temperature is measured at which motion stops.
Learn more about absolute zero:https://brainly.com/question/27951132
#SPJ1
an object 24.0 cm from a concave mirror creates a virtual image at -33.5 cm. if the image is 7.25 cm tall, what is the height of the object?
The height of the object will be -5.19 cm
A concave mirror's reflecting surface curves inward and away from the light source. Light is reflected inward to a single focus point via concave mirrors. Concave mirrors, in contrast to convex mirrors, produce a variety of images depending on the object's to the mirror.
Given an object 24.0 cm from a concave mirror creates a virtual image at -33.5 cm. if the image is 7.25 cm tall
So let,
v = Image distance from the mirror = -33.5 cm
u = object distance from the mirror (concave) = 24 cm
hi = Image height = 7.25 cm
h = height of the object = ?
Using below formula to find height of the object
-v/u = hi/h
Putting all value in the formula we get
-(-33.5)/(-24) = 7.25/h
h = -5.19 cm
Therefore the height of the object will be -5.19 cm
Learn more about Concave mirror here:
https://brainly.com/question/3727024
#SPJ10
Taking the density of air to be 1.29 kg/m3, what is the magnitude of the angular momentum (in kg · m2/s) of a cubic meter of air moving with a wind speed of 73.0 mi/h in a hurricane? Assume the air is 51.2 km from the center of the hurricane "eye."
The magnitude of the angular momentum of air will be 4.128 x 10^(-3) kg·m^2/s
The rotating equivalent of linear momentum in physics is called angular momentum. Because it is a conserved quantity—the total angular momentum of a closed system stays constant—it is significant in physics. Both the direction and the amplitude of angular momentum are preserved.
Given the density of air to be 1.29 kg/m3 and a wind speed of 73.0 mi/h
We have to find the magnitude of the angular momentum
Let,
ρ = Density of air = 1.29 kg/m^3
v = Speed of wind = 73.0 mi/h = 0.032 km/s
M = angular momentum of air
Let the volume of air be 1 m^3
Mass = Volume x ρ = 1 x 1.29 = 1.29 kg
Momentum = M = mass x velocity
Momentum = 1.29 x 0.0032
Momentum = 4.128 x 10^(-3) kg·m^2/s
Hence the magnitude of the angular momentum of air will be 4.128 x 10^(-3) kg·m^2/s
Learn more about angular momentum here:
https://brainly.com/question/7538238
#SPJ10
NGC 300 is the name of a spiral galaxy that looks similar to our Milky Way galaxy. It contains billions of stars. How is NGC 300 different from our solar system?
NGC 300 is different from our solar system because of its smaller size.
How is NGC 300 different from our solar system?NGC 300 galaxy is different from our solar system because of its size. NGC 300 is smaller than our solar system which means that it has less number of stars as compared to our solar system.
So we can conclude that NGC 300 is different from our solar system because of its smaller size.
Learn more about solar system here: https://brainly.com/question/1286910
#SPJ1
It takes a minimum distance of 76.50 m to stop a car moving at 15.0 m/s by applying the brakes (without locking the wheels). Assume that the same frictional forces apply and find the minimum stopping distance when the car is moving at 32.0 m/s.
The minimum stopping distance when the car is moving at 32.0 m/s is 348.3 m.
Acceleration of the car
The acceleration of the car before stopping at the given distance is calculated as follows;
v² = u² + 2as
when the car stops, v = 0
0 = u² + 2as
0 = 15² + 2(76.5)a
0 = 225 + 153a
-a = 225/153
a = - 1.47 m/s²
Distance traveled when the speed is 32 m/sIf the same force is applied, then acceleration is constant.
v² = u² + 2as
0 = 32² + 2(-1.47)s
2.94s = 1024
s = 348.3 m
Learn more about distance here: https://brainly.com/question/4931057
#SPJ1
I was having trouble converting this p-t graph into a velocity-time graph and acceleration-time graph. Can someone convert it and send a picture of it?
We can obtain the velocity from the graph and plot is against time to obtain a velocity time graph.
What is a velocity time graph?The velocity time graph shows the change of velocity with time. Recall that velocity is the change of position with time.
As such, when we have a position time graph as shown, we can obtain the velocity from the graph and plot is against time to obtain a velocity time graph.
Learn more about velocity time graph:https://brainly.com/question/11290682
#SPJ1
1. If the amplitude of a vibrating mass attached to the free end of an ideal spring is
25 cm, then the mass in one period travels 'a distance:
a) 1m
b) 0
c) 25m
The mass in one period travels 'a distance less than 25 cm which will be 0.
What is amplitude of a pendulum?
The amplitude of a pendulum is the maximum displacement of the pendulum.
If the maximum displacement of the pendulum is 25 cm, the mass in one period travels a distance less that 25 cm.
Thus, then the mass in one period travels 'a distance less than 25 cm which will be 0.
Learn more about amplitude here: https://brainly.com/question/413740
#SPJ1
'The wave' is a particular type of pulse that can propagate through a large crowd gathered at a sports arena to watch a soccer, hockey, or CFL game. The elemets of the medium are the spectators, with zero position corresponding to their being seated and maximum position corresponding to their standing and raising their arms. When a large fraction of the spectators participate in the wave motion, a somewhat stable pulse shape can develop. The wave speed depends on people's reaction time, which is typically on the order of 0,1s. Estimate the order of magnitude, in minutes, of the time required for such a pulse to make one circuit around BC Place Stadium in Vancouver.
State all the assumptions that you've made.
Information about BC Place: dimensions are approximately 100 m X 85 m.
The total time required is 1 minute and 0.3 seconds.
Assumption: The distance between the people is 1 m and the stadium is a circle with a radius of 100m.
Here, the time taken by the person is 0.1 seconds.
Total distance covered by the wave = Circumference of the circle
So, total distance = 2 πr = 2 × 3.14 × 100 = 618 m
As the distance between each of the people is 1 m.
So, the number of personal interactions is 618.
Time taken by each person is 0.1 seconds.
So, total time, t = 0.1 × 618 = 61.8 seconds.
So, the order of the magnitude of the time required is 1 minute and 0.3 seconds for such a pulse to make one circuit around BC Place Stadium in Vancouver.
Hence, the total time required is 1 minute and 0.3 seconds.
Learn more about waves here:
https://brainly.com/question/15663649
#SPJ10