Answer:
Backwash effect
Explanation:
Your friend moved along the shore due to ; The swash effect and the Backwash effect
Swash effect is caused by the upsurge of water up along the slopping front of the beach and this same upsurge in water moves back into the beach in what is known as the backwash effect hence the movement of your friend form where they were in the surf zone to another position still within the surface zone is caused by the BACKWASH EFFECT
He moved along the shore due to Backwash effect
What is backwash effect?Your friend moved along the shore due to ; The swash effect and the Backwash effect
Swash effect is caused by the upsurge of water up along the slopping front of the beach and this same upsurge in water moves back into the beach in what is known as the backwash effect.
hence the movement of your friend form where they were in the surf zone to another position still within the surface zone is caused by the Backwash effect.
To know more about backwash effect follow
https://brainly.com/question/5060579
The scanning process and magnetic lenses used in a scanning electron microscope often results in fair to poor resolution and "fuzzy" images.
(A)True
(B)False
Answer:
(B)False is the answer.
Explanation:
PLEASE HELP!!! WILL GIVE 30 POINTS!! HAS TO BE CORRECT!
The picture below shows a solar event in the sun's atmosphere.
Which of these events is most likely to occur as a result of the solar event pictured above?
Disruption to electricity power grid
Less aurora activity at the poles
The sun's photosphere would be blocked
The sun's magnetic effect would decrease
Answer:
the answer is A . Disruption to electricity power grid :)
Explanation:
A Newtonian fluid with a viscosity drains through the space between two large parallel plates as shown in the figure. The gap distance between the plates is 2b. Obtain relations for the shear stress distribution, shear stress at the walls, velocity profile and volumetric flow rate assuming laminar flow and negligible end effects. You can begin the derivations by considering that vz=vz(x) only and pressure at the inlet and outlet is atmospheric.
Answer:
well
Explanation:
basically it's like
Which of the following is an example of charging by friction?
Answer: where is the examples?
Explanation:
Look at pic for question pls help
B IS YOUR ANSWER.
Soft sound has small amplitude and louder sound has large amplitude. Since, the second wave has large amplitude, it will have the loudest sound.
HELP!!
An electric motor is used to lift an elevator and
occupants (mass = 1.50 x 10kg) to a helght of
15.0 m in 30.0 s at a constant velocity. What is
the power output of the motor? I know the answer I just need someone to show me the steps so I understand how to solve this
Answer: (7.35 x 10^3 W)
Answer:
[tex]P=7.35\times 10^{3}\ W[/tex]
Explanation:
Given that,
Mass, [tex]m=1.5\times 10^2\ kg[/tex]
It lifts to a height of 15 m in 3 s
We need to find the power of the motor. The formula for power is given by :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{mgh}{t}\\\\P=\dfrac{1.5\times 10^2\times 9.8\times 15}{3}\\\\P=7.35\times 10^{3}\ W[/tex]
So, the power of the motor is equal to [tex]7.35\times 10^{3}\ W[/tex].
A Or b
Question in picture
Answer:
the answer to the question is indeed B
1.00 x 100 kg of clear liquid (specific heat
capacity = 5.11 x 102 J/kg•°C) at a temperature
of 15.0°C gains 3.33 x 10 J of heat. What is the
final temperature of the liquid? (Assume the
melting point is less than 15.0°C and the boiling
point is greater than 62.0°C.)
Answer:
No temperature change occurs from heat transfer if ice melts and becomes liquid water (i.e., during a ... to change 1 kg of liquid water at the normal boiling point (100ºC at atmospheric pressure) to steam (water vapor).
The melting point of lead is 327.3o C. Assume the final temperature of the system is T. Then the amount of energy released by the lead as it solidifies is. ΔQ = mleadLlead = 0.09 kg*(2.45*104 J/kg) = 2205 J
Why did the “yielders” conform in Asch’s experiment?
Answer:
Asch's experiment showed that about 75% of people were "yielders" who conformed and 25% were "independent" who didn't conform. Asch concludes that people ignored reality and gave an incorrect answer in order to follow the rest of the group.
An electron moves through a region of crossed electric and magnetic fields. The electric field E = 3059 V/m and is directed straight down. The magnetic field B = 1.14 T and is directed to the left. For what velocity v of the electron into the paper will the electric force exactly cancel the magnetic force?
Answer:
v = 2683.33 m/s
Explanation:
The magnetic force and the electric force on the electron must be the same, in order for them to cancel each other:
[tex]Electric\ Force = Magnetic\ Force\\Eq = qvBSin\theta \\\\v = \frac{E}{BSin\theta}[/tex]
where,
v = velcoity of electron = ?
E = Electric Field = 3059 V/m
B = Magnetic Field = 1.14 T
θ = Angle between velocity and magnetic field = 90°
Therefore,
[tex]v = \frac{3059\ V/m}{(1.14\ T)Sin90^o}[/tex]
v = 2683.33 m/s
Which segments show changes of state that absorb heat? Check all that apply.
B–C
C–D
D–C
D–E
E–F
Answer:
B-C
D-E
Explanation:
Trust
Answer:
B-C and D-E are correct
Explanation:
example of kinetic energy into heat energy
Answer:
The kinetic energy of large objects can be converted into this thermal energy.
Explanation:
For example, if you drop a water balloon onto the ground, its kinetic energy is converted mostly to thermal energy. If the balloon weighs 1 kilogram and you drop it from about 2 meters, it will heat up by less.
It is measured that 3/4 of a body's volume is submerged in oil of density 800kg/m³
Complete question:
It is measured that 3/4 of a body's volume is submerged in oil of density 800kg/m³. What is the specific gravity of oil?
Answer:
The specific gravity of the oil is 0.8.
Explanation:
Given;
density of the oil, [tex]\rho_o[/tex] = 800 kg/m³
density of water, [tex]\rho_w[/tex] = 1000 kg/m³
The specific gravity of any substance is the ratio of the substance density to the density of water.
Specific gravity of the oil = density of the oil / density of water
Specific gravity of the oil = 800/1000
Specific gravity of the oil = 0.8
Therefore, the specific gravity of the oil is 0.8.
The light ray is traveling from Acrylite into air. The refractive index for air is 1.00. If the angle of incidence and the angle of refraction are known, how could you determine the refractive index of Acrylite?
Answer:
Refraction. A light ray traveling through some plastic has a frequency of 5.5 x 1014 Hz. It is ... making an angle of 32° with the normal to the interface; it passes through the ... [5 points] (a) What is the refractive index of the glass? ... What you do know is the wavelength of the light in glass, 321 nm, and you know the frequency.
Explanation:
The refractive index of Acrylate is determined as: ratio of sine of incident angle to sine of refractive angle.
What is Snell's law?The relationship between the angles of incidence and refraction for light or other waves flowing through a border between two different isotropic media, such as water, glass, or air, is described by Snell's law, a formula.
The amount a light ray bends as it travels through different media is measured by the refractive index.
Given that: The refractive index for air is 1.00.
Let the angle of incidence from medium air to Acrylate is = i
the angle of refraction from medium air to Acrylate is = r.
Let the refractive index for Acrylate = n.
Then according to Snell's law:
1×sini = n× sinr
n = sini/sinr.
Hence, the refractive index of Acrylate is ratio of sine of incident angle to sine of refractive angle.
Learn more about Snell's law here:
https://brainly.com/question/2273464
#SPJ2
The Image shows a magnetic field around the poles of a magnet. Identify the areas where the magnetic force is the strongest.
N
Answer:
strongest are at the points of the north pole and the south pole, specifically between the red box and the letter of each pole.
Explanation:
The lines of magnetic force are drawn so that the density of lines is proportional to the intensity of the magnetic field.
Therefore, the sections where the magnetic field is strongest are at the points of the north pole and the south pole, specifically between the red box and the letter of each pole.
Water cam form large dewdrops in nature. How would droplets made of isopropyl alcohol instead of water be different?
Answer:
Isopropyl alcohol would form smaller droplets because it has a lower surface tension than water has.
Explanation:
Free use of uniforms and socialization with classmates are possible advantages of ? A.)
dual sports B.)community-based sports programs C.)individual sports D.) school-based sports programs
Answer:
its d
Explanation:
Linda, a biker, is moving along a circular path at a constant speed of 10 km/h. In a neighboring arena Kevin, another biker, is moving along a circular path at a constant speed of 12 km/h. If the acceleration of the two bikers is the same, what can you infer?
A) The centripetal force on Kevin is higher than that on Linda.
B) The centripetal force on Linda is higher than that on Kevin.
C) Kevin’s circular path has a bigger radius than Linda’s path.
D) Linda’s circular path has a bigger radius than Kevin’s path
Answer:
the answer is C
Explanation:
i took the test just now so i am glad i can help someone in the future❣❣❣❣
Also here is the explanation
Note that the magnitude of acceleration (a) is given by a =
v2
R
, where v is the speed and R is the radius. Because acceleration is the same for both bikers, the ratio 
v2
R
, also has to be the same for both. Given that Kevin’s speed is higher, the radius of his path must also be higher to maintain the same ratio. Therefore, Kevin’s circular path has a bigger radius than Linda’s path.
Just as optical astronomers observe the visible light emitted by objects such as stars and galaxies, radio astronomers can also observe the radio waves emitted by these objects, as well as the radio waves emitted by gas and dust. However, radio telescopes are different from optical telescopes in important ways. In general, compared to optical telescopes, radio telescopes are larger. more curved. more expensive. smaller. This is because
Answer:
Radio telescopes are LARGER than optical telescopes and this is because radio wavelengths are much longer than optical wavelengths
Explanation:
In general radio telescopes are LARGER than optical telescopes and this is because radio wavelengths are much longer than optical wavelengths.
The main difference between radio telescopes and other telescopes especially optical telescopes is based on size and wavelength of both telescopes
PLEASE HELP ME PLEASE!
Answer:
40N
Explanation:
The weight is "how much force of gravity drags this down".
Because we're told that gravity on the Moon exerts 1.6N of force per kg, a 25kg object will weigh:
[tex]F_g = 25kg \cdot 1.6\frac{N}{kg} = 40N[/tex]
Which of the following is the most important difference between a permanent magnet and a electromagnet
Answer:
Explanation: the major difference between an electromagnet and permanent magnet is that the former can have a magnetic field when electric current flows through it and disappears when the flow of the current stops. ... It will always displays the magnetic behaviour.
Jill doubled the force acting on an object, yet she kept the acceleration constant or unchanged.
How did she do this?
Answer:
Mass doubles
Explanation:
Since F = ma, and given that the acceleration stayed constant, the mass must have changed. (Assuming thatt when the problem states the force doubles, they mean the net force doubles). Note, that the mass does not have to change if the acceleration is zero.
Question 2 of 10
Which type(s) of radiation can damage living cells?
O A. Beta particles and gamma rays only
O B. Alpha particles, beta particles, and gamma rays
O C. Gamma rays only
D. Alpha particles and gamma rays only
The type of radiation which can damage the living cells are the X-rays, beta particles, and the gamma rays. Thus, the correct option is A.
What are damaging radiations?Radiations have been found to damage the DNA molecules present in the cells. High doses of the radiation damage the cell and these radiations could lead to Acute Radiation Syndrome (ARS) or Cutaneous Radiation Injuries (CRI). High doses of these radiation could also lead to formation of tumor and cancer later in the life.
Gamma rays are the most harmful external hazard or radiations among all the radiations and these result into acute effects. Beta particles are also harmful to the cell because these can partially penetrate the skin, causing beta burns in the skin. Alpha particles cannot penetrate the intact skin. Gamma and x-rays can pass through a person which results into damaging cells in their path.
Therefore, the correct option is A.
Learn more about Radiations here:
https://brainly.com/question/13934832
#SPJ7
How much kinetic energy does a 0.30-kg stone have if it is thrown at 44 m/s?
O 440J
O 510 J
O 580J
0 290
Answer:
0 290
Explanation:
Answer:
290
Explanation:
the reason is that the formula for kinetic energy is half m×v².
you divde half by 0.30 multiply by 44×44
you get 290.4
then you round it to significant figures to get 290
1. The block shown below is being putled to the right on a horizontal table,
Which labeled vectors represent all the forces acting on the block?
Answer:
E
Explanation:
'J
A student on a skateboard, with a combined mass of 78,2 kg, is moving east at
1,60 m.s 1. As he goes by, the student skilfully scoops his 6,4 kg backpack from the
bench where he had left it. What will be the velocity of the student immediately
after the pickup?
Answer:
v = 1.48 m / s
Explanation:
This is an exercise in conserving the moment. Let's define a reference system made up of the student, the scooter and the collected mass. For this system the forces during the collection are internal and element and conserves
initial interim. Before picking up the merchandise
p₀ = M v₀
final instant. After picking up the object
p_f = (M + m ') v
how the moment was created
p₀ = p_f
M v₀ = (M + m) v
let's calculate
v = [tex]\frac{M}{m+ M}[/tex] vo
v = 78.2 / (6.4 +78.2) 1.60
v = 1.48 m / s
A cell membrane consists of an inner and outer wall separated by a distance of approximately 10nm10nm. Assume that the walls act like a parallel plate capacitor, each with a charge density of 10−5C/m2, and the outer wall is positively charged. Although unrealistic, assume that the space between cell walls is filled with air.
1. What is the magnitude of the electric field between the membranes?
A. 1×10^−15N/C
B. 5×10^−5N/C
C. 1×10^6N/C
D. 9×10^−2N/C
2. What is the magnitude of the force on a Ca++ ion between the cell walls?
A. 4×10^−13N
B. 4×10^−12N
C. 2×10^−12N
D. 2×10^−11N
3. What is the potential difference between the cell walls?
A. 1×10^7V
B. 1×10^−2V
C. 6×10^−3V
D. 10V
4. What is the direction of the electric field between the walls?
A. Toward the outer wall.
B. Parallel to the walls.
C. Toward the inner wall.
D. There is no electric field.
5. If released from the inner wall, what would be the kinetic energy of a 3fC charge at the outer wall? 1fC=10^−15C.
A. 3×10^−14J
B. 3×10^−17J
C. 3×10^−8J
D. 3×10^−2J
Answer:
the correct answue are B, A, C, C, B
Explanation:
1) The electric field is requested, let's approximate the membrane by a parallel plate with surface charge density
E = [tex]\frac{\sigma }{2 \epsilon_o }[/tex]
E = [tex]\frac{ 10^{-5}}{2 \ 8.85 \ 10^{-12}}[/tex]
E = 5.65 10⁵ N / C
the correct answer is B
2) A calcium ion has two positive charges, so the force applied by each side of the membrane (plate)
F = q E
F = 2 1.6 10⁻¹⁹ 5.65 10⁵
F = 1.8 10⁻¹³ N
the total force is the sum of the force of each membrane and the two forces go to the same side
F = total = 2 F
F_total = 3.6 10⁻¹³ N
the correct answer is A
3) the field and the electric potential are related
ΔV = - E s
ΔV = - 5.65 10⁵ 10 10⁻⁹
ΔV = - 5.65 10⁻³ V
the correct answer is C
4) In the exercise they indicate that the outer wall has a positive charge, therefore, as they indicate that we approximate the system to a capacitor, the inner wall must be negatively charged.
The electric field goes from the positive to the negative charge, which is why it goes from the outer wall to the inner wall
the correct answer is C
5) For this part we use conservation of energy
starting point. On the inside wall, brown
Em₀ = U = qV
final point. On the outside
Em_f = K
energy is conserved
Em₀ = Em_f
q V = K
K = 3 10⁻¹⁵ 5.65 10⁻³
K = 1.7 10⁻¹⁷ J
the correct answer is B
What characteristic helps us determine
the temperature of a star?
A. shape
B. texture
C. color
Answer:
I would say color.
Explanation:
Because for me most of the time the warm color mean It hot. and the cool color most likily to mean cold
Answer:
Color
Explanation:
The temperature of a star is determined by the color. lol :)
The electron gun in a television tube uses a uniform electric field to accelerate electrons from rest to 4.1 x 10^7 m/s in a distance of 1.4 cm
Answer:
a = 6 x 10¹⁶ m/s²
Explanation:
The acceleration of the electrons can be found by using the third equation of motion:
[tex]2as = v_f^2-v_i^2[/tex]
where,
a = acceleration = ?
s = distance = 1.4 cm = 0.014 m
vf = final speed = 4.1 x 10⁷ m/s
vi = initial speed = 0 m/s
Therefore,
[tex]2a(0.014\ m) = (4.1\ x\ 10^7\ m/s)^2-(0\ m/s)^2\\\\a = \frac{1.681\ x\ 10^{15}\ m^2/s^2}{0.028\ m}[/tex]
a = 6 x 10¹⁶ m/s²
The acceleration of the electron will be a = 6 x 10¹⁶ m/s²
What is acceleration?The acceleration is defined as when the velocity of any moving object changes with respect to the time it is called as the acceleration.
The acceleration of the electrons can be found by using the third equation of motion:
[tex]2as=v_f^2-v_i^2[/tex]
where,
a = acceleration = ?
s = distance = 1.4 cm = 0.014 m
vf = final speed = 4.1 x 10⁷ m/s
vi = initial speed = 0 m/s
Therefore, By putting the values we will get
[tex]2a(0.014)=(4.1\times 10^7)-(0)[/tex]
[tex]a=\dfrac{1.681\times 10^{15}}{0.028}[/tex]
a = 6 x 10¹⁶ m/s²
Thus the acceleration of the electron will be a = 6 x 10¹⁶ m/s²
To know more about acceleration, follow
https://brainly.com/question/25749514
what mass of water is required to absorb 4.7 x 10 to the 5th power J of energy from a car engine while the temperature increases from 298K to 355 K
HELPPPPP