which statement must be true for a rocket to travel from earth to another planet? group of answer choices it must have large engines. it must attain escape velocity from earth. it must carry a lot of extra fuel. it must be launched from space, rather than from the ground.

The net force on q2 is -112.5 N, directed towards q3.

To find the net force on q2, we need to first find the forces exerted on it by q1 and q3 using Coulomb's Law:

The force exerted by q1 on q2 is given by:

[tex]F1 = (k * q1 * q2) / d1^2[/tex]

where k is Coulomb's constant ([tex]9 * 10^9 N m^2 / C^2[/tex]), d1 is the distance between q1 and q2 (0.5 m).

Plugging in the values:

F1 = [tex](9 * 10^9 N m^2 / C^2)[/tex] * [tex](-5.00 * 10^{-6 }C)[/tex] * ([tex]2.50 * 10^{-6} C[/tex]) / [tex](0.5 m)^2[/tex]

F1 = -22.5 N (repulsive, as q1 and q2 have opposite signs)

The force exerted by q3 on q2 is given by:

[tex]F3 = (k * q3 * q2) / d3^2[/tex]

where d3 is the distance between q2 and q3 (0.25 m).

Plugging in the values:

F3 = [tex](9 *10^9 N m^2 / C^2)[/tex] *[tex](-2.50 * 10^{-6} C)[/tex] * [tex](2.50 * 10^{-6} C)[/tex] / [tex](0.25 m)^2[/tex]

F3 = -90 N (attractive, as q2 and q3 have the same sign)

To find the net force, we need to add these forces vectorially, since they act in opposite directions:

Fnet = F1 + F3

Fnet = -22.5 N - 90 N

Fnet = -112.5 N

To know more about Coulomb's Law refer here

https://brainly.com/question/506926#

#SPJ11

At a temperature of absolute zero, which is 0 Kelvin (K), the motion of atoms and molecules reaches its minimum possible energy state.

Here's why:

1. Temperature is a measure of the average kinetic energy of the particles in a substance. As the temperature decreases, the kinetic energy of the particles also decreases.

2. At extremely low temperatures, the atoms and molecules in a substance will have very low kinetic energy and will move much more slowly.

3. At 0 Kelvin (which is equivalent to -273.15 degrees Celsius), the particles in a substance will have zero kinetic energy and will be in their lowest possible energy state.

4. At this temperature, the particles will still exhibit some motion due to their quantum mechanical nature, but their motion will be highly constrained and they will be effectively motionless.

5. However, it is not currently possible to reach 0 Kelvin in a laboratory setting, as the process of cooling a substance to such a low temperature would require the removal of all energy from the system.

Therefore, the correct answer to the question is (D) 0 K, although it is important to note that the complete cessation of motion is not actually possible.

To know more about kinetic energy refer here

https://brainly.com/question/26472013#

#SPJ11

The wavelength of the sound wave is approximately 1.5 meters.

1 pt: Knowns/Unknown:
- Frequency (f) = 230 beats per second (Hz)
- Speed of sound (v) = 340 m/s
- Wavelength (λ) = Unknown

1 pt: Write the equation:
The equation relating the speed of sound, frequency, and wavelength is: v = f * λ

1 pt: Solve:
To find the wavelength (λ), rearrange the equation: λ = v / f

1 pt: Correct answer (rounded to one decimal place):
λ = 340 m/s / 230 Hz ≈ 1.5 m

The wavelength of the sound wave is approximately 1.5 meters.

To learn more about sound, refer below:

https://brainly.com/question/29707602

#SPJ11

Answer: A white dwarf with a temperature of 10,000 K belongs to the spectral class DA.

White dwarfs are classified based on their atmospheric composition and temperature. The DA spectral class refers to white dwarfs that have a hydrogen-dominated atmosphere. Their spectra exhibit strong hydrogen absorption lines.

The temperature of a white dwarf is a measure of its surface temperature and is related to its age and mass. A white dwarf with a temperature of 10,000 K is relatively hot, indicating that it is likely a young and massive white dwarf.

Explanation:

Answer:

it's the turning effect of force; the product of force and perpendicular distance from line of action of the force to the pivot . Depends on two factors: size of force applied and perpendicular distance from pivot to line of action of the force

The cylinder is moving at a speed of 2.12 m/s after it has rolled 2.2 m down the incline.

We can use conservation of energy to solve this problem. The initial potential energy of the cylinder is converted into kinetic energy as it rolls down the incline. At the bottom of the incline, the kinetic energy is equal to the potential energy it had at the top, neglecting any energy losses due to friction.

Let's begin by finding the potential energy of the cylinder at the top of the incline. The height of the incline can be found using trigonometry:

h = (2.2 m)sin(18°) = 0.667 m

The potential energy of the cylinder at the top of the incline is:

PE = mgh = (5.25 kg)(9.81 m/s²)(0.667 m) = 34.2 J

At the bottom of the incline, the kinetic energy of the cylinder is equal to its potential energy at the top:

KE = 34.2 J

The kinetic energy of a rolling cylinder is given by:

KE = (1/2)mv² + (1/2)Iω²

where m is the mass of the cylinder, v is its velocity, I is its moment of inertia, and ω is its angular velocity. For a cylinder rolling without slipping, we have:

v = ωR

where R is the radius of the cylinder. The moment of inertia of a solid cylinder about its central axis is:

I = (1/2)mr²

Substituting these expressions into the equation for kinetic energy and simplifying, we get:

KE = (1/2)mv² + (1/4)mv²

Solving for v, we find:

v = sqrt(8KE/3m)

Substituting in the values we found above, we get:

v = sqrt(8(34.2 J)/(3(5.25 kg))) = 2.12 m/s

To know more about conservation of energy refer here

https://brainly.com/question/13949051#

#SPJ11

The diffusion time for oxygen across the 2.0-μm-thick membrane separating air from blood is approximately 3.64 × 10^-5 s.

The diffusion time for oxygen across the 2.0-μm-thick membrane can be calculated using Fick's law of diffusion:

J = -D * (ΔC/Δx)

Where:

J = rate of diffusion

D = diffusion coefficient

ΔC/Δx = concentration gradient

Assuming that the concentration gradient across the membrane is constant, we can simplify the equation to:

t = x^2 / (2D)

Where:

t = diffusion time

x = thickness of the membrane

Substituting the given values:

t = (2.0 × 10^-6 m)^2 / (2 × 1.1 × 10^-11 m^2/s)

t = 3.64 × 10^-5 s

Therefore, the diffusion time for oxygen across the 2.0-μm-thick membrane separating air from blood is approximately 3.64 × 10^-5 s.

Learn more on diffusion here https://brainly.com/question/94094

#SPJ1

The first step necessary to allow calculation of voltages in a combination circuit containing resistive loads in series and parallel is to simplify the circuit using Ohm's law and Kirchhoff's laws.

This involves identifying the resistors in series and parallel, and then using the appropriate circuit laws to calculate the total resistance of the circuit.

Once the total resistance is calculated, the current flowing through the circuit can be found using Ohm's law.

From there, the voltage drop across each resistor can be calculated using the current and the resistance.

By combining the voltage drops across the resistors, the total voltage of the circuit can be found.

To know more about Kirchhoff's laws, refer here:

https://brainly.com/question/30400751#

#SPJ11

To graphically determine the acceleration due to gravity near Earth's surface using a sphere in simple harmonic motion, the students can follow these steps:

1. Set up the Experiment:

  - Attach the sphere to one end of the string.

  - Attach the other end of the string to the ring stand, allowing the sphere to hang freely.

  - Ensure that the sphere is not touching any other objects and has enough clearance to swing back and forth.

2. Measure the Period:

  - Use a stopwatch or a timer to measure the time it takes for the sphere to complete one full oscillation (swing back and forth).

  - Repeat this measurement multiple times to get accurate and consistent results.

3. Measure the Length:

  - Measure the length of the string from the point of suspension (ring stand) to the center of the sphere.

  - Ensure that the measurement is taken from the resting position of the sphere, not when it is swinging.

4. Calculate the Acceleration due to Gravity:

  - The period of simple harmonic motion (T) is related to the acceleration due to gravity (g) and the length of the pendulum (L) through the formula: T = 2π√(L/g).

  - Rearrange the formula to solve for g: g = (4π²L) / T².

  - Substitute the measured values of the period (T) and length (L) into the formula to calculate the acceleration due to gravity (g).

5. Repeat for Different Lengths (Optional):

  - If time and resources permit, the students can repeat the experiment with different lengths of the string.

  - By measuring the period (T) and length (L) for different setups, they can collect multiple data points to create a graph and further analyze the relationship between period and length.

6. Graphical Analysis:

  - Plot the period (T) on the x-axis and the corresponding calculated acceleration due to gravity (g) on the y-axis.

  - Use the data points obtained from the experiment to create a graph.

  - The slope of the graph represents the square of the reciprocal of the acceleration due to gravity (1/g²), allowing the students to determine the acceleration due to gravity near Earth's surface.

To know more about acceleration refer here

https://brainly.com/question/9415862#

#SPJ11

The speed at which the ball hit the ground is 31.36 m/s.

Speed is the rate of change of distance.

To calculate the speed at which the ball hit the ground, we use the formula below

Formula:

Where:

From the question,

Given:

Substituite these values into equation 1

Learn more about speed here: https://brainly.com/question/29110645

#SPJ1

To determine the minimum horizontal force that must be applied to the top of the container to cause tipping, we need to use the concept of torque. Torque is a force that causes rotation and is defined as the product of the force and the perpendicular distance from the point of rotation. In this case, the point of rotation is the edge of the container in contact with the floor.

Firstly, we need to find the weight of the container which is given by the mass times the acceleration due to gravity (9.8 m/s^2). Thus, the weight of the container is 593.88 N.

Next, we need to find the maximum force of static friction that the floor can exert on the container to prevent it from tipping. This is given by the coefficient of static friction (0.570) times the weight of the container (593.88 N). Thus, the maximum force of static friction is 338.73 N.

To cause tipping, a force must be applied to the container in such a way that it produces torque. This torque must overcome the torque produced by the force of static friction. The torque produced by the force of static friction is equal to the product of the maximum force of static friction and the distance from the point of rotation to the line of action of the force of static friction, which is half the height of the container (0.5 m).

Thus, the minimum horizontal force that must be applied to the top of the container to cause tipping is the force required to produce a torque equal to the torque produced by the force of static friction. This is given by the equation:

force x distance = maximum force of static friction x 0.5
Solving for force, we get:
force = (maximum force of static friction x 0.5) / distance

Substituting the values, we get:
force = (338.73 N x 0.5) / 0.6 m
force = 282.27 N

Therefore, the minimum horizontal force that must be applied to the top of the container to cause tipping is 282.27 N.

In conclusion, the minimum horizontal force required to tip the container depends on the coefficient of static friction and the distance between the point of rotation and the line of action of the force. In this case, the force required is 282.27 N, which must be applied at a distance of 0.6 m from the point of rotation.

To know more about horizontal force refer here

https://brainly.com/question/2037071#

#SPJ11

The electrostatic force between the electrons is approximately 2.31 x 10⁻²⁸ N, acting in a repulsive manner.

To find the electrostatic force between the two electrons, we will use Coulomb's Law, which states that the electrostatic force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them. Mathematically, this is represented as:

F = (k * q1 * q2) / r²

Where k is Coulomb's constant, approximately equal to 8.99 x 10⁹ Nm²/C². In this problem, both electrons have a charge of -1.6 x 10⁻¹⁹ C, and they are separated by a distance of 3.4 x 10⁻¹¹ m. Plugging these values into the equation, we get:

F = (8.99 x 10⁹ Nm²/C² * (-1.6 x 10⁻¹⁹ C) * (-1.6 x 10⁻¹⁹ C)) / (3.4 x 10⁻¹¹ m)²

Calculating the force:

F ≈ 2.31 x 10⁻²⁸ N

Since both electrons have negative charges, the electrostatic force between them is repulsive. This is because like charges repel each other, while opposite charges attract. In this case, the two electrons have the same negative charge, which causes them to repel one another.

For more about electrostatic force:

https://brainly.com/question/9774180

#SPJ11

Answer:

yes

Explanation:

The magnitude of the charge on each ion is [tex]1.01 \times 10^{-18} C[/tex].

The electrostatic force between two like ions is given by Coulomb's law, which states that the force is directly proportional to the product of the charges on the ions and inversely proportional to the square of the distance between them. Therefore, we can use Coulomb's law to solve for the charge on each ion.

First, we need to convert the distance between the ions to meters, since Coulomb's law requires the distance to be expressed in SI units. 0.5 nm is equal to [tex]5 \times 10^{-10} m[/tex].

Next, we can plug the given values into Coulomb's law:

[tex]$F = k\frac{q_1q_2}{r^2}$[/tex]

where F is the electrostatic force, k is Coulomb's constant, [tex]q_1[/tex] and [tex]q_2[/tex] are the charges on the ions, and r is the distance between the ions.

Substituting the values we have:

[tex]$3.7 \times 10^{-9} \text{ N} = \frac{9 \times 10^9 \text{ Nm}^2/\text{C}^2 \cdot q^2}{(5 \times 10^{-10} \text{ m})^2}$[/tex]

Solving for q, we get:

[tex]$q = \pm 1.01 \times 10^{-18} \text{ C}$[/tex]

To learn more about magnitude

https://brainly.com/question/14452091

#SPJ4

Sunlight is considered a renewable resource because it is a source of energy that can be replenished over a relatively short period of time.

Sunlight is constantly being produced by the sun and will continue to be produced for billions of years.

The disadvantages of renewable resources are:

- Renewable energy supplies may not be completely reliable.

- Many renewable energy facilities have higher operating costs.

The other two options are not disadvantages of renewable resources. In fact, renewable energy sources will never run out, and they produce relatively smaller quantities of waste products compared to non-renewable sources.

While it is true that it can be difficult to generate electricity in large quantities using renewable resources, it is not a disadvantage in and of itself, but rather a challenge that can be addressed through further research and development.

To know more about Sunlight refer here

https://brainly.com/question/28782526#

#SPJ11

It takes more energy to heat up 1 kg of cold water than 0.5 kg of cold water to the same temperature because water has a relatively high specific heat capacity. The specific heat capacity is the amount of energy required to raise the temperature of one unit of mass of a substance by one degree Celsius.

In other words, it takes more energy to raise the temperature of a larger mass of water than a smaller mass of water by the same amount. This is because the larger mass of water requires more energy to overcome the intermolecular forces between its molecules, which are stronger than in a smaller mass of water.

Additionally, since water has a high specific heat capacity, it can absorb a lot of heat energy without a significant increase in temperature. Therefore, a larger mass of water requires more energy to raise its temperature by the same amount compared to a smaller mass of water.

To know more about specific heat capacity here

https://brainly.com/question/2906898

#SPJ4

The two true statements about the force between a steel can and a magnet are:

1. The attraction between the can and the magnet is a pull.
2. The force between the can and the magnet is a noncontact force.

The attraction between the can and the magnet is a pull:

When a steel can is brought close to a magnet, it experiences a force of attraction. This force is referred to as a pull because it acts in the direction that brings the can closer to the magnet.

This magnetic attraction occurs due to the interaction between the magnetic fields generated by the magnet and the steel can. The presence of a magnetic field in the magnet induces a temporary magnetism in the steel can, creating an attractive force between them.

The force between the can and the magnet is a noncontact force:

In this context, a noncontact force refers to a force that can act between objects without physical contact. In the case of a steel can and a magnet, the force of attraction between them occurs without direct contact between the two objects.

The magnet generates a magnetic field that extends into the surrounding space, and the steel can experiences a force within this magnetic field.

However, there is no need for the can and the magnet to touch each other for this force to be present. This noncontact force is a result of the magnetic field interaction between the magnet and the steel can.

To learn more about magnet, refer below:

https://brainly.com/question/2841288

#SPJ11

When a rectangular coil moves towards the right in a magnetic field directed would be: the generation of an electromotive force (EMF)

When a rectangular coil moves towards the right in a magnetic field directed into the plane of the paper:

(a) The effect of the coil moving towards the right would be the generation of an electromotive force (EMF) within the coil due to the changing magnetic field. This would result in the production of an electric current within the coil.

(b) The phenomenon responsible for this observation is called electromagnetic induction.

(c)The rule used to determine the direction of the current produced in electromagnetic induction is Fleming's Right Hand Rule. This rule states that if you extend your thumb, index finger, and middle finger of your right hand such that they are perpendicular to each other, then the thumb points in the direction of the motion of the conductor, the index finger points in the direction of the magnetic field, and the middle finger points in the direction of the induced current.

To know more about electromotive force, refer here:

https://brainly.com/question/24182555#

#SPJ11

complete question:

Figure shows a magnetic field associated with a rectangular coil directed into the plane of the paper.

(a) What would be the effect if the coil moves towards right? 1 mark

(b) Name the phenomenon responsible for the above observation. 1 mark

(c)( State the rule that is used to determine the direction of current produced in the phenomenon.

The correct answer is option 1: "to send a moral message." King Louis XVI's goal for Jacques-Louis David's Oath of the Horatii was to promote patriotic values and discourage individualism, and the painting was intended to send a moral message about the importance of loyalty to the state and self-sacrifice.

The net force acting on the helium balloon is 3603.2 N.

Calculate the weight of the load and the balloon cover:

Weight = Mass x Gravity

Weight of load = 110 N

Weight of balloon cover = 50 N

Calculate the buoyant force:

Buoyant force = Density x Gravity x Volume

Since helium is lighter than air, it will displace a volume of air equal to its own volume. Therefore, we can use the density of air instead of helium.

Buoyant force = 1.2 kg/m3 x 9.8 m/s2 x 32 m3 = 3763.2 N

Calculate the net force:

Net force = Buoyant force - Weight

Net force = 3763.2 N - 110 N - 50 N = 3603.2 N

To know more about buoyant force, here

brainly.com/question/21990136

#SPJ4

--The completely accurate question is , What is the net force acting on the helium balloon if it is used to lift a load of 110 N and the weight of the balloon cover is 50 N, and its volume when fully inflated is 32 m3? --

The acceleration due to gravity on the surface of Titan is approximately 3.49 m/s². Thus, the correct option is B. 3.49 m/s².

To calculate the acceleration due to gravity on the surface of Titan, we can use the formula:

Acceleration due to gravity (g) = G * (Mass of Titan / Radius of Titan²)

Where:

G is the gravitational constant, approximately

[tex]6.67430 * 10^{-11} m^3/(kgs^2)[/tex]

Mass of Titan = 1.35 × [tex]10^{23[/tex] kg

Radius of Titan = 2.58 × [tex]10^6[/tex] m

Plugging in the values into the formula:

[tex]g = (6.67430 * 10^{-11} m^3/(kgs^2)) * (1.35 * 10^{23} kg) / (2.58 * 10^6 m)^2[/tex]

Calculating the value:

g ≈ 3.49 m/s²

To know more about acceleration due to gravity refer here

https://brainly.com/question/13860566#

#SPJ11

The vector (2, y) has an x-component with a length of 2.

A vector with an x-component of length 2 can be represented as:

Vector V = (2, y)

In this representation, the x-component of the vector is 2, and the y-component can have any value since it was not specified.

To know more about vector refer here

https://brainly.com/question/24256726#

#SPJ11

No, the hospital did not switch babies.

The reason for Little Toad's white cap with white spots is most likely due to a recessive gene that was inherited from both parents. This means that even though Toad is purebred dominant for red spots on white cap, he could still carry a recessive gene for white spots.

Similarly, Toadette may also carry the same recessive gene. If both parents carry the recessive gene and both pass it on to their offspring, then the offspring will display the recessive trait. Therefore, it is possible for Little Toad to inherit the recessive gene from both parents and display the white spots on the white cap.

In other words, the hospital did not switch babies as the white cap with white spots on Little Toad is most likely due to the inheritance of recessive genes from both parents.

More on the inheritance of recessive genes can be found here: https://brainly.com/question/15481938

#SPJ1

The increase in height of the pendulum is: approximately 2.04 cm, and the velocity of the bob as it passes through the bottom of the swing is approximately 0.894 m/s.

a) To calculate the increase in height, we can use the formula for GPE: GPE = mgh, where m is the mass (50g or 0.05kg), g is the gravitational acceleration (approximately 9.81 m/s^2), and h is the height.

Given that the GPE is 0.1 J, we can rearrange the formula to solve for h:

h = GPE / (mg).

Plugging in the values, we get h = 0.1 / (0.05 * 9.81) ≈ 0.0204 m or 2.04 cm.

b) As the pendulum swings, its GPE is converted to KE at the bottom of the swing. We can use the conservation of energy principle, which states that the total energy (GPE + KE) remains constant. Since the GPE at the top of the swing equals the KE at the bottom,

we can use the formula for KE to find the velocity of the bob:

KE = 0.5 * m * v^2, where m is the mass (0.05kg) and v is the velocity.

We know that the GPE is 0.1 J, so we can set this equal to the KE and solve for v: 0.1 = 0.5 * 0.05 * v^2. Rearranging and solving for v, we get v ≈ 0.894 m/s.

In summary, the increase in height of the pendulum is approximately 2.04 cm, and the velocity of the bob as it passes through the bottom of the swing is approximately 0.894 m/s.

To know more about pendulum, refer here:

https://brainly.com/question/29702798#

#SPJ11

complete question:

Describe the energy changes as a pendulum swings if the pendulum has a mass of 50g and is lifted so that has a GPE of 0. 1 calculate

a. its increase in height

b. the velocity of the bob as it pass through the bottom of the swing

Answer:

EK = 440 Joule

Explanation:

Known:

m = 55 kg

v = 4 m/s

Ek = ?

Equation to solve this is:

Ek = 1/2 m [tex]v^{2}[/tex]

Ek = 1/2 . (55) . [tex](4)^{2}[/tex]

Ek = 440 J

The total kinetic energy, Ktotal, of the uniform solid cylindrical disk of mass M = 1. 4 kg and radius R = 0. 085 m is (D) 393.8 J.

To solve this problem, we need to use the formula for the kinetic energy of a rotating object, which includes both translational and rotational kinetic energy.

The translational kinetic energy of the disk is given by 1/2 mv², where m is the mass of the disk and v is its velocity. In this case, m = 1.4 kg and v = 15 m/s, so the translational kinetic energy is 1/2 (1.4 kg) (15 m/s)² = 157.5 J.

The rotational kinetic energy of the disk is given by 1/2 Iω², where I is the moment of inertia of the disk and ω is its angular velocity. For a solid cylindrical disk, the moment of inertia is 1/2 MR². We also know that the disk is rolling without slipping, so the velocity of its center of mass is equal to the product of its angular velocity and its radius, v = ωR. Solving for ω, we get ω = v/R.

Substituting these values into the formula for rotational kinetic energy, we get 1/2 (1/2 MR²) (v/R)^2 = 1/8 Mv². Plugging in the values for M and v, we get 1/8 (1.4 kg) (15 m/s)² = 236.3 J.

Adding the translational and rotational kinetic energies together, we get Ktotal = 157.5 J + 236.3 J = 393.8 J.

Therefore, the correct answer is (D) 393.8 J.

Learn more about mass at: https://brainly.com/question/12242087

#SPJ11

To use Ohm's Law in the form of y=mx+c to calculate the average resistance of an ohmic conductor, you need to understand that Ohm's Law is V=IR, where V is voltage, I is current, and R is resistance.

In this case, y represents voltage (V), m represents resistance (R), x represents current (I), and c is the constant (0 for an ohmic conductor).

Now, you can rewrite Ohm's Law as y=mx+c or V=IR+0. To find the average resistance, you'll need to collect data on voltage (V) and current (I) at various points.

Then, plot these points on a graph with voltage (y-axis) against current (x-axis). The slope (m) of the best-fit line through these points will give you the average resistance (R) of the ohmic conductor.

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

The rocket will continue to move forward in a straight line at a constant speed, as long as the engines remain on and exerting force.

While the engine of the rocket is on, the rocket will experience a net force in the direction opposite to the direction of the exhaust. According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction.

When the astronaut turns on the rocket's engines, the engines will exert a force on the rocket, causing it to accelerate in the direction of the force. Since there is no gravity or air resistance in outer space, there will be no opposing forces to slow down the rocket's acceleration. The direction of the acceleration of the rocket is determined by the net force acting on it. As the rocket's engines are exerting a force in one direction, and there is no other external force acting on the rocket, the rocket will move in the opposite direction to the exhaust gases.

To know more about the force, click here;

https://brainly.com/question/18038995

#SPJ11

The value of the rate of flow of heat through the insulating fiber glass slab is 196 W.

The quantity of heat that is transmitted through a material per unit of time is known as the rate of heat flow and is often expressed in watts (joules per second).

The term "heat flow" is redundant because heat is the movement of thermal energy caused by thermal non-equilibrium.

Area of the fiber glass slab, A = 1.4 m²

Temperature of the fiber glass, T₁ = 175°C

Temperature outside, T₂ = 35°C

Thermal conductivity of the fiberglass, k = 0.04 Wm⁻¹K⁻¹

Thickness of the fiberglass, d = 0.04 m

The expression for the rate of flow of heat through the insulation is given by,

Q/t = kAΔT/d

Q/t = 0.04 x 1.4 x (175 - 35)/0.04

Q/t = 1.4 x 140

Q/t = 196 W

To learn more about heat flow, click:

https://brainly.com/question/30888604

#SPJ12

The fate of the core depends on the mass of the star and the balance between gravity and the pressure created by the nuclear reactions.

When a high-mass star runs out of hydrogen fuel in its core, it starts to undergo significant changes. Initially, the core of the star shrinks and heats up, as the gravitational pull becomes stronger due to the decreased energy output from the nuclear fusion reactions. This increase in temperature and pressure allows for helium fusion to begin, which produces heavier elements such as carbon and oxygen.

The process of helium fusion is much faster than hydrogen fusion, and it causes the core to heat up even more. This can lead to further fusion reactions, creating elements up to iron. The star's outer layers, however, continue to expand and cool, causing it to become a red giant.

Ultimately, the core of a high-mass star will either continue to fuse heavier elements until it can no longer sustain nuclear reactions, leading to a supernova explosion, or it will collapse under its own weight to form a black hole or a neutron star.

To learn more about : mass

https://brainly.com/question/86444

#SPJ11