which statement describes an experimental step(s) that is necessary to determine the molar mass using the freezing point depression method? measure the heat of fusion of the pure solvent and then measure the heat of fusion of the pure solute. measure the freezing point of the pure solvent and then measure the freezing point of the solution. determine the molar mass of the solute by looking up the elements in the periodic table. calculate the number of moles in a kilogram of solvent to determine its molality.

If the final temperature of the wood is 57C, then the initial temperature of the wood would have been 32.00 ºC.

To solve the problem, we can use the formula,

Q = m * c * ΔT , amount of heat absorbed by the wood is Q, its mass is m, specific heat capacity is c, the change in temperature is ΔT.

We know that m = 1500.0 g, c = 1.8 J/gºC, Q = 67,500 J, and the final temperature T₂ = 57ºC. We need to find the initial temperature T₁.

First, we can calculate the change in temperature,

ΔT = T₂ - T₁

ΔT = 57ºC - T₁

Next, we can rearrange the formula to solve for T₁,

T₁ = T₂ - (Q / (m * c))

T₁ = 57ºC - (67,500 J / (1500.0 g * 1.8 J/gºC))

T₁ = 57ºC - 25ºC

T₁ = 32ºC

Therefore, the initial temperature of the wood was 32.00 ºC.

To know more about specific heat capacity, visit,

https://brainly.com/question/21406849

#SPJ4

The required mass of argon gas to completely fill a 20.4 L container to an atmospheric pressure of 1.09 atm at 25°C is 37.0 g.

The Volume of the container = 20.4 L

Temperature =  25 degrees

Pressure  = 1. 09 atm

To calculate the mass of the Argon gas, we need to use the ideal gas law equation.

PV = nRT

n = PV/RT

Assuming universal gas constant R=  0.0821 L·atm/(mol·K).

Converting temperature degrees to Kelvin scale

T = 25°C + 273.15 = 298.15 K

Substituting the above values, we get:

n = (1.09 atm)*(20.4 L)/(0.0821 L·atm/mol·K)*(298.15 K)

n = 0.926 mol

The molar mass of argon = 39.95 g/mol,

The mass of argon needed to serve the container is:

0.926 mol × 39.95 g/mol = 37.0 g

Therefore,  we can infer that the mass of argon gas required is 37.0 g.

To learn more about the Mass of Argon gas

https://brainly.com/question/4239844

#SPJ4

Cellulose and amylose are both polysaccharides, which are long chains of monosaccharide units (glucose units) joined together by glycosidic linkages.

The structure of cellulose is a linear chain of beta-D-glucose units joined by beta-1,4 glycosidic linkages. The repeating unit in cellulose is cellobiose, which is made up of two glucose units joined by a beta-1,4 glycosidic linkage. Cellulose molecules are held together by hydrogen bonds between adjacent chains to form strong, rigid fibers.

The structure of amylose is a linear chain of alpha-D-glucose units joined by alpha-1,4 glycosidic linkages. Unlike cellulose, amylose is unbranched. Amylose forms a spiral or helical structure, with the glucose units arranged in a tight coil held together by hydrogen bonds between adjacent glucose units.

Both cellulose and amylose are made up of glucose units and are held together by glycosidic linkages. The main difference is the type of glycosidic linkage between the glucose units - cellulose has beta-1,4 glycosidic linkages, while amylose has alpha-1,4 glycosidic linkages. Another difference is the way in which the glucose units are arranged - cellulose forms straight, rigid chains, while amylose forms a coiled or helical structure.

The stability of the structures of cellulose and amylose is due to the hydrogen bonds between the glucose units. These hydrogen bonds are formed between the hydroxyl groups on adjacent glucose units, which allows for strong, stable interactions between the chains.

Visit here to learn more about Cellulose brainly.com/question/27963779

#SPJ11

The partial pressure of ethane and propane in the flask are both 16.42 atm.

The given information tells us that the flask is sealed, which means that no gas can enter or leave the flask. It also tells us that the volume of the flask is 10.0L and the temperature is 400K. Finally, it tells us that there are equimolar amounts of ethane and propane in the flask.

From this information, we can assume that the total pressure inside the flask is the sum of the partial pressures of ethane and propane. This is because the ideal gas law tells us that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is the temperature. Since the number of moles of each gas is the same, we can assume that their partial pressures are equal.

To find the partial pressures, we need to use the ideal gas law again. However, we need to know the total number of moles of gas in the flask. We can find this by using the fact that the amounts of ethane and propane are equimolar. Since the molar mass of ethane is 30 g/mol and the molar mass of propane is 44 g/mol, we know that the total mass of gas in the flask is 74 g. Dividing this by the sum of the molar masses (30+44=74 g/mol), we get the total number of moles, which is 1 mol.

Now we can use the ideal gas law to find the partial pressures. We'll use R = 0.08206 L·atm/(mol·K) as the gas constant. For ethane, we have:

PV = nRT
P_ethane * 10.0L = 0.5 mol * 0.08206 L·atm/(mol·K) * 400K
P_ethane = (0.5 mol * 0.08206 L·atm/(mol·K) * 400K) / 10.0L
P_ethane = 16.42 atm

For propane, we get the same result:

PV = nRT
P_propane * 10.0L = 0.5 mol * 0.08206 L·atm/(mol·K) * 400K
P_propane = (0.5 mol * 0.08206 L·atm/(mol·K) * 400K) / 10.0L
P_propane = 16.42 atm

Therefore, the partial pressure of ethane and propane in the flask are both 16.42 atm.

Know more about Partial Pressure here:

https://brainly.com/question/31214700

#SPJ11

Student has a sample of copper (I) sulfate hydrate, then the percent of water in the sample is 40%.

In chemistry, a hydrate is a compound that contains water molecules that are chemically bound to the atoms or ions of the compound.

Mass of the anhydrous salt is given as 12 grams.

So, mass of water = total mass - mass of anhydrous salt

mass of water = 20 g - 12 g

mass of water = 8 g

Now, % water = (mass of water ÷ total mass) × 100

% water = (8 g ÷ 20 g) × 100

% water = 40%

Therefore, the percent of water in the sample is 40%.

To know more about hydrate, refer

https://brainly.com/question/16275027

#SPJ1

By combining 125.0 grams of Pb(SO4)2 with an excess of LiNO3, we will be able to make 145.5 grams of Li2SO4.

What is Stoichiometry ?

Stoichiometry is the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction. It involves the calculation of the amounts of reactants needed to produce a certain amount of product, or the amount of product that can be produced from a given amount of reactants.

To determine the amount of Li2SO4 produced, we need to use stoichiometry and balance the chemical equation for the reaction between Pb(SO4)2 and LiNO3:

Pb(SO4)2 + 2LiNO3 → Pb(NO3)2 + 2LiSO4

From the balanced equation, we can see that one mole of Pb(SO4)2 reacts with 2 moles of LiNO3 to produce 2 moles of LiSO4. Therefore, we need to convert the mass of Pb(SO4)2 given to moles, and then use the mole ratio to calculate the amount of Li2SO4 produced.

125.0 g Pb(SO4)2 × 1 mol Pb(SO4)2 / Pb(SO4)2 molar mass = 0.404 mol Pb(SO4)2

Next, we use the mole ratio between Pb(SO4)2 and Li2SO4 to calculate the number of moles of Li2SO4 produced:

0.404 mol Pb(SO4)2 × 2 mol LiSO4 / 1 mol Pb(SO4)2 = 0.808 mol Li2SO4

Finally, we convert the number of moles of Li2SO4 to grams:

0.808 mol Li2SO4 × Li2SO4 molar mass = 145.5 g Li2SO4

Learn more about Stoichiometry from the given link

https://brainly.com/question/16060223

#SPJ1

To solve this problem, we need to use the balanced chemical equation for the reaction of Potassium and water:

2K + 2H2O → 2KOH + H2

This equation tells us that for every 2 moles of Potassium that react with water, we get 1 mole of hydrogen gas.

So, if we have 20.0 g of Potassium, we need to first convert this to moles using the molar mass of Potassium:

20.0 g K x (1 mol K / 39.10 g K) = 0.511 mol K

Now we can use the stoichiometry of the balanced equation to find the moles of hydrogen produced:

0.511 mol K x (1 mol H2 / 2 mol K) = 0.255 mol H2

Therefore, there are 0.255 moles of hydrogen produced in the reaction.:

2K + 2H2O → 2KOH + H2

This equation tells us that for every 2 moles of Potassium that react with water, we get 1 mole of hydrogen gas.

So, if we have 20.0 g of Potassium, we need to first To solve this problem, we need to use the balanced chemical equation for the reaction of Potassium and water:

2K + 2H2O → 2KOH + H2

This equation tells us that for every 2 moles of Potassium that react with water, we get 1 mole of hydrogen gas.

So, if we have 20.0 g of Potassium, we need to first convert this to moles using the molar mass of Potassium:

20.0 g K x (1 mol K / 39.10 g K) = 0.511 mol K

Now we can use the stoichiometry of the balanced equation to find the moles of hydrogen produced:

0.511 mol K x (1 mol H2 / 2 mol K) = 0.255 mol H2

Now we can use the stoichiometry of the balanced equation to find the moles of hydrogen produced:

0.511 mol K x (1 mol H2 / 2 mol K) = 0.255 mol H2

Therefore, there are 0.255 moles of hydrogen produced in the reaction.

To know more about stoichiometry click here:

brainly.com/question/14935523

#SPJ11

The amount of heat that would be given out is 14.1kJ.

Heat capacity is a physical property that describes the amount of heat required to raise the temperature of a substance by one degree Celsius. We know that the heat capacity of steam is 2J/g/°C.

We can tell that;

H = mcdT

H = heat that is absorbed or evolved

m = mass of the object

c = Heat capacity of the object

dT = temperature change

Then we have that;

H = 150 * 2 * (98 - 145)

H = -14.1kJ This is the heart lost

Learn more about heat capacity:https://brainly.com/question/29766819

#spj1

The frequency and energy of collisions between reactant molecules have an impact on the rate of a chemical reaction, according to collision theory.

The reactant particles must collide with enough energy during solution formation to overcome the attraction forces holding them together and create a new product. Important elements in this process are particle size and motion.

More collisions are possible due to the larger surface area that smaller particle sizes offer. The probability that faster-moving particles may collide with another particle with enough energy to start a successful reaction is also increased.

To know more about collision theory, visit,

https://brainly.com/question/20628781

#SPJ4

The volume of the gas in the cylinder is less than the volume of the room, the gas will not displace all the air in the room.

To determine whether the gas will displace all the air in the room, we need to compare the volume of the gas in the cylinder to the volume of the room.

First, we need to convert the volume of the gas cylinder from liters to cubic meters:

V_cylinder = 65 L = 0.065 m^3

Next, we can use the ideal gas law to calculate the number of moles of gas in the cylinder:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Rearranging this equation,

n = PV/RT

where P, V, and T are the initial conditions of the gas in the cylinder.

n = (3.6 × 10^3 kPa)(0.065 m^3)/(8.31 J/(mol K) × 283 K) ≈ 0.89 mol

Next, we can use the volume of one mole of gas at SATP (i.e., 24.8 L/mol) to calculate the volume of gas that was initially in the cylinder:

V_initial = n × 24.8 L/mol ≈ 22.1 L

Since the volume of the gas in the cylinder is less than the volume of the room, the gas will not displace all the air in the room.

To know more about  volume of the gas refer here:

https://brainly.com/question/1984369

#SPJ11

To calculate the error between your calculated specific heat of each metal and the known values in Table C, you should use the following formula: Error = ((calculated specific heat of metal - known specific heat of metal) / known specific heat of metal) * 100.

In the last step of the lab, you need to calculate the error between your calculated specific heat of each metal and the known values in Table C. To do this, you will return to Step 10 in your Lab Guide and follow the directions provided. The formula you will use is:

Error = (calculated metal - known metal) / (known Cmetal) x 100

This formula will give you the percentage error between your calculated values and the known values in Table C. To calculate the error for each metal, simply plug in the values for the specific heat you calculated and the known value for that metal from Table C. Make sure to follow the directions carefully in your Lab Guide to ensure accurate calculations.

Learn more about specific heat at https://brainly.com/question/30403247

#SPJ11

36.855 moles of O2 are needed to fully combust 5.67 moles of C4H10.

To determine the number of moles of O2 needed to fully combust 5.67 moles of C4H10, first, we need to balance the given chemical equation:

C4H10(l) + O2(g) → CO2(g) + H2O(l)

Balanced equation:
C4H10(l) + 13/2 O2(g) → 4 CO2(g) + 5 H2O(l)

Now, we can use stoichiometry to find the moles of O2 required. Here's a step-by-step explanation:

Step 1: Identify the given and unknown values.
Given: moles of C4H10 = 5.67 moles
Unknown: moles of O2

Step 2: Use the balanced equation to find the mole ratio between C4H10 and O2.
Mole ratio (C4H10 : O2) = 1 : 13/2

Step 3: Use the mole ratio to determine the moles of O2 required for complete combustion.
(5.67 moles C4H10) * (13/2 moles O2 / 1 mole C4H10) = X moles O2

Step 4: Calculate the moles of O2.
X = 5.67 * (13/2) = 36.855 moles O2

So, 36.855 moles of O2 are needed to fully combust 5.67 moles of C4H10.

To know more about moles, visit:

https://brainly.com/question/31597231#

#SPJ11

The amount of HCl(aq) required to ensure that it is not the limiting reactant when reacting with 5.0g of MgO(s) depends on the mole ratio of the reaction.

The mole ratio of the reaction is 1 mole of HCl for every 1 mole of MgO, therefore, 0.5 moles of HCl is required for the reaction.

To determine the volume of HCl(aq) required for the reaction, the molarity of the solution must be known. Assuming that the molarity of the solution is 2 mol/L, the required volume of HCl(aq) would be 0.5 moles/2 mol/L = 0.25 L or 250mL of HCl(aq).

To ensure that HCl(aq) is not the limiting reactant, at least 250 mL of HCl(aq) should be used in the reaction.

Know more about  Mole ratio here

https://brainly.com/question/15288923#

#SPJ11

A solution of 0. 600M HCl is used to titrate 15. 00 mL of KOH solution. The endpoint of titration is reached after the addition of 27. 13 mL of HCI. The concentration of the KOH solution is (b) 1.09 M.

To solve this problem, we can use the balanced chemical equation for the reaction between HCl and KOH:

HCl + KOH → KCl + H₂O

From the balanced equation, we can see that one mole of HCl reacts with one mole of KOH.

Given that 0.600 M HCl is used and 27.13 mL is added to reach the endpoint, we can calculate the number of moles of HCl used:

moles HCl = M x V = 0.600 M x 0.02713 L = 0.01628 mol HCl

Since the reaction is 1:1, there must be 0.01628 mol of KOH in the 15.00 mL solution. We can calculate the concentration of KOH as follows:

Molarity = moles / volume

Molarity = 0.01628 mol / 0.01500 L = 1.09 M

Therefore, the concentration of the KOH solution is (b) 1.09 M.

To know more about the titration refer here :

https://brainly.com/question/31309007#

#SPJ11

The mole ratio of H to C in ethanol is 1:3.

The mole ratio of H to C in ethanol, which has a chemical formula of CH3CH2OH, can be determined by looking at the number of atoms of each element present in the molecule. In this case, there are six carbon atoms and two hydrogen atoms. Therefore, the mole ratio of H to C in ethanol is 1:3.

This means that for every one mole of hydrogen atoms in ethanol, there are three moles of carbon atoms present. This ratio is important because it can be used to calculate the amount of reactants needed to produce a certain amount of product in a chemical reaction.

For example, if ethanol was being produced from a reaction involving a certain amount of carbon and hydrogen, the mole ratio of H to C could be used to determine how much of each reactant was needed to produce a specific amount of ethanol.

Overall, understanding the mole ratio of H to C in a molecule like ethanol can be useful in a variety of chemical applications and reactions.

Know more about Mole ratio here:

https://brainly.com/question/15288923

#SPJ11

The final velocity of two cars that stick together after a collision is 18.5 m/s. The change in kinetic energy of the system is 322,505 J, and an inelastic collision occurred.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a closed system remains constant if no external forces act on it.

First, we calculate the initial momentum of the system:

p_initial = m1 * v1 + m2 * v2

p_initial = 1250 kg * 20.0 m/s + 1610 kg * 8.0 m/s

p_initial = 40,000 kg m/s + 12,880 kg m/s

p_initial = 52,880 kg m/s

Next, we calculate the total mass of the system after the collision:

m_total = m1 + m2

m_total = 1250 kg + 1610 kg

m_total = 2860 kg

Since the two cars stick together after the collision, we can assume that they move as one object. Therefore, the final velocity of the two cars can be calculated as follows:

v_final = p_initial / m_total

v_final = 52,880 kg m/s / 2860 kg

v_final = 18.5 m/s

To calculate the change in kinetic energy of the system, we can use the formula:

ΔK = K_final - K_initial

The initial kinetic energy of the system can be calculated as:

K_initial = 1/2 * m1 * v1² + 1/2 * m2 * v2²

K_initial = 1/2 * 1250 kg * (20.0 m/s)² + 1/2 * 1610 kg * (8.0 m/s)²

K_initial = 400,000 J + 51,520 J

K_initial = 451,520 J

The final kinetic energy of the system can be calculated as:

K_final = 1/2 * m_total * v_final²

K_final = 1/2 * 2860 kg * (18.5 m/s)²

K_final = 774,025 J

Therefore, the change in kinetic energy of the system is:

ΔK = K_final - K_initial

ΔK = 774,025 J - 451,520 J

ΔK = 322,505 J

Since the total kinetic energy of the system is not conserved, and some of it is converted to other forms of energy such as heat and sound, we can conclude that an inelastic collision occurred in the system.

To know more about the kinetic energy refer here :

https://brainly.com/question/26472013#

#SPJ11

The specific heat capacity of glass is 0.84 J/g°C.

To calculate the specific heat capacity of the glass, follow these steps:
1. Determine the energy gained by the water: Q_water = m_water * c_water * ΔT_water
2. Determine the energy lost by the glass: Q_glass = m_glass * c_glass * ΔT_glass
3. Since energy is conserved, Q_water = Q_glass
4. Solve for the specific heat capacity of the glass (c_glass).


m_glass = 45.7 g
m_water = 250.0 g
c_water = 4.18 J/g°C
Initial temperature of water (T1_water) = 22.5°C
Final temperature (T2) = 24.2°C
ΔT_water = T2 - T1_water = 1.7°C
ΔT_glass = T2 - 100°C = -75.8°C

1. Q_water = 250.0 g * 4.18 J/g°C * 1.7°C = 1776.7 J
2. Q_glass = 45.7 g * c_glass * (-75.8°C)
3. 1776.7 J = 45.7 g * c_glass * (-75.8°C)
4. c_glass = 0.84 J/g°C

To know more about specific heat capacity click on below link:

https://brainly.com/question/29766819#

#SPJ11

When reading an electron dot diagram, you can determine the number of valence electrons an atom has and use that information to predict how it will bond with other atoms. Atoms tend to form bonds in order to achieve a full outer shell of electrons, which is the most stable arrangement. By looking at the number of dots in the electron dot diagram, you can predict how many bonds an atom is likely to form and what types of atoms it will bond with.

To read an electron dot diagram, you first need to understand what it represents. An electron dot diagram, also known as a Lewis structure, shows the number of valence electrons that an atom has. Valence electrons are the electrons in the outermost energy level of an atom and are involved in chemical bonding.

The dot diagram shows the symbol for the element surrounded by dots representing the valence electrons. Each dot represents one electron, and the dots are placed around the symbol in pairs, with no more than two dots on each side.

For example, carbon has four valence electrons, so its electron dot diagram would show four dots surrounding the symbol for carbon. Nitrogen, on the other hand, has five valence electrons, so its electron dot diagram would show five dots.

For more such questions on electron

https://brainly.com/question/11316046

#SPJ11

The patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.

Patterns in the periodic table in terms of protons, electrons, and valence electrons, and how these might relate to an element being a metal or nonmetal.

In the periodic table, you'll notice the following patterns:

1. The number of protons (also known as the atomic number) increases by one from left to right across a period and down a group. This is because each element has one more proton than the element before it.

2. The number of electrons in a neutral atom is equal to the number of protons, so the electron count also increases by one across a period and down a group.

3. Valence electrons are the outermost electrons of an atom, and they play a significant role in chemical bonding. As you move from left to right across a period, the number of valence electrons increases from 1 to 8. In contrast, when you move down a group, the number of valence electrons remains the same.

Now, let's discuss how these patterns relate to an element being a metal or nonmetal:

1. Metals are typically found on the left side of the periodic table, while nonmetals are on the right side. This is because metals generally have fewer valence electrons (1 to 3) and are more likely to lose them in a chemical reaction. Nonmetals have more valence electrons (4 to 8) and are more likely to gain or share them.

2. The number of valence electrons determines the reactivity and bonding behavior of elements. Metals with fewer valence electrons are more reactive, while nonmetals with more valence electrons are less reactive.

In conclusion, the patterns in the periodic table concerning protons, electrons, and valence electrons can help us understand the properties of elements, including whether they are metals or nonmetals. The position of an element in the table and the number of valence electrons it possesses are crucial factors in determining its behavior and reactivity.

To know more about metal and nonmetal :

https://brainly.com/question/13963963

#SPJ11

The mass of ammonia that will be produced according to the reaction given would be 17.9 g.

The balanced equation for the reaction is:

[tex]N_2 + 3H_2 -- > 2NH_3[/tex]

Also:

PV = nRT

The number of moles of nitrogen and hydrogen involved in the reaction can be calculated as:

From the balanced equation, we can see that the limiting reactant is nitrogen since it reacts with 3 moles of hydrogen to produce 2 moles of ammonia.

n(NH3) = (2 mol NH3 / 1 mol N2) x 0.526 mol N2 = 1.05 mol NH3

Mass of ammonia = mole x molar mass

                              = 1.05 mol x 17.03 g/mol

                              = 17.9 g

In other words, the mass of ammonia produced is 17.9 g.

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

The density of oil is 0.55 g/mL
To determine the density of the oil, first calculate the mass of the oil alone by subtracting the mass of the empty beaker from the total mass: 100 grams (total mass) - 45 grams (empty beaker mass) = 55 grams (mass of oil).

Now, use the formula for density, which is:

Density = Mass / Volume

In this case:

Density of oil = 55 grams (mass of oil) / 100 milliliters (volume of oil) = 0.55 g/mL.

So, the density of the oil is 0.55 g/mL.

To know more about density:

https://brainly.com/question/1354972

#SPJ11

Fossil fuels are the largest contributor of the  greenhouse  gas carbon dioxide,this causes health and environmental issues.

This causes health and environmental issues as it contributes to global warming and climate change. The burning of fossil fuels such as coal, oil and gas releases carbon dioxide into the atmosphere, which traps heat and leads to the Earth's temperature rising.

This can cause extreme weather events, rising sea levels, and harm to ecosystems and wildlife. Additionally, carbon dioxide can contribute to respiratory and cardiovascular health issues in humans and animals.

Therefore, it is important to transition to renewable energy sources in order to reduce our reliance on fossil fuels and mitigate the impacts of climate change.

To know more about global warming click on below link:

https://brainly.com/question/12908180#

#SPJ11

There are 3530.88 grams of sulfuric acid (H₂SO₄) dissolved in a 2-liter solution that is 18 molar.

To calculate the grams of sulfuric acid (H₂SO₄) dissolved in a 2-liter solution that is 18 M (molar), you can follow these steps:

1. Determine the moles of H₂SO₄ in the solution:
Moles of H₂SO₄ = Molarity × Volume of solution
Moles of H₂SO₄ = 18 M × 2 L = 36 moles

2. Calculate the grams of H₂SO₄ using the molar mass:
Grams of H₂SO₄ = Moles × Molar mass of H₂SO₄
The molar mass of H₂SO₄ = (2 × H) + (1 × S) + (4 × O) = (2 × 1.01) + (32.07) + (4 × 16.00) = 98.08 g/mol

3. Multiply the moles of H₂SO₄ by its molar mass:
Grams of H₂SO₄ = 36 moles × 98.08 g/mol = 3530.88 grams

So, 3530.88 grams of sulfuric acid (H₂SO₄) are dissolved in a 2-liter solution that is 18 molar.

Learn more about sulfuric acid at https://brainly.com/question/10220770

#SPJ11

The standard entropy change for the reaction [tex]2Mg(s)+O_2(g) \rightarrow 2MgO(s)[/tex] is -326.3 J/(K⋅mol).

Entropy is a measure of the energy available to do work that is contained within a system. It is a measure of the randomness or disorder within a system. In thermodynamics, entropy is an important concept because it measures the amount of energy that is not available to do work. Entropy is often associated with the amount of energy that is released when a system undergoes a change.

The standard entropy change for the reaction [tex]2Mg(s)+O_2(g) \rightarrow 2MgO(s)[/tex] can be calculated using the equation given below:

ΔS° =ΣS°products−ΣS∘reactants

Substituting the given values in the equation,

ΔS° = [2(27.00 J/(K⋅mol))]−[(32.70 J/(K⋅mol))+(205.0 J/(K⋅mol))]

ΔS° = -326.3 J/(K⋅mol)

Therefore, the standard entropy change for the reaction [tex]2Mg(s)+O_2(g) \rightarrow 2MgO(s)[/tex] is -326.3 J/(K⋅mol).

To learn more about entropy

https://brainly.com/question/419265

#SPJ4

Limiting reactant: O2  and Amount of product formed: 47.7 g P2O3

To determine the limiting reactant and the amount of product formed, we need to first calculate the amount of product that can be formed from each reactant, assuming they completely react.

From the balanced chemical equation:

[tex]P4 + O2 → P2O3[/tex]

The stoichiometry of the reaction shows that 1 mole of P4 reacts with 5 moles of O2 to form 2 moles of [tex]P2O3[/tex]. Therefore, we need to calculate the number of moles of each reactant:

Number of moles of P4 = 65.1 g / 123.9 g/mol = 0.525 mol

Number of moles of O2 = 34.2 g / 32.0 g/mol = 1.069 mol

Next, we can calculate the amount of product that can be formed from each reactant:

From P4: (0.525 mol P4) x (2 mol P2O3 / 1 mol P4) x (109.9 g/mol P2O3) = 115.6 g P2O3

From O2: (1.069 mol O2) x (2 mol P2O3 / 5 mol O2) x (109.9 g/mol P2O3) = 47.7 g P2O3

Therefore, we can see that the amount of P2O3 that can be formed from O2 is lower than that of P4. This indicates that O2 is the limiting reactant, and P4 is in excess.

The maximum amount of product that can be formed is 47.7 g P2O3. This is the amount of product that would be formed if all the O2 was consumed. Therefore, the answer is:

Limiting reactant: O2

Amount of product formed: 47.7 g P2O3

To know more about Limiting reactant refer to-

https://brainly.com/question/14225536

#SPJ11

Answer:

Answer: B. 1

Explanation:

I hope this helps you

Answer:

A: PQ

Explanation:

The total energy needed to convert the 475.0 grams of water at 40.0°C to steam at 100.0°C is 1,068,637.5 Joules.

The energy needed to change 475.0 grams of liquid water at 40.0°C to steam at 100.0°C is known as the latent heat of vaporization.

This amount of energy is required to overcome the forces that keep the molecules of water in a liquid state. In other words, it is the energy needed to break the bonds that keep the molecules of water in a liquid state.

To calculate the total energy needed, the latent heat of vaporization is multiplied by the mass of water. Therefore, the total energy needed to convert the 475.0 grams of water at 40.0°C to steam at 100.0°C is 1,068,637.5 Joules.

This energy needs to be supplied in the form of heat for the water to change from liquid to steam.

Know more about Latent heat of vaporization here

https://brainly.com/question/2598640#

#SPJ11

The rate of the reaction will increase because the concentration of the reactants increases.

When the volume of a reaction vessel with gaseous reactants is reduced to one-fourth of its original volume, the gaseous particles are brought closer together. This results in an increased concentration of the reactants, as there are more particles in a smaller space.

Higher concentrations of reactants lead to a greater likelihood of successful collisions between reactant particles, which in turn leads to an increased rate of the reaction.

So, by decreasing the volume and increasing the concentration of reactants, you effectively speed up the reaction rate.

To know more about rate of the reaction click on below link:

https://brainly.com/question/30546888#

#SPJ11