Answer:
no d
Explanation:
it has a permanent dipole
CH₃F compound contains polar covalent bonds in its structure, hence option D is correct.
This happens when the electronegativity of the relevant atoms differs significantly.
The electronegativities of the carbon and fluorine atoms in CH3F are dissimilar. Because fluorine is more electronegative than carbon, it attracts the shared electrons to it, giving the fluorine atom a partial negative charge and the carbon atom a partial positive charge.
A polar covalent bond is created as a result of this unequal charge distribution. CH₃F compound contains polar covalent bonds in its structure.
Learn more about polar covalent bond, here:
https://brainly.com/question/28295508
#SPJ2
Which of the following best describes the structure of a nucleic acid?
a
Carbon ring(s)
b
Globular or fibrous
c
Single or double helix
d
Hydrocarbon(s)
QUICKKKKK ill do 200+ points next question, how would you produce 1L of a .5 M KF solution, from a stock solution of 1 M KF
Answer:
We will take the 0.5 L from the 1M stock solution of KF inorder to form 0.5 M KF of 1L.
Explanation:
Given data:
Final volume = 1L
Final molarity = 0.5 M
Initial molarity = 1 M
Initial volume = ?
Solution:
Formula:
M₁V₁ = M₂V₂
1 M × V₁ = 0.5 M ×1L
V₁ = 0.5 M ×1L /1 M
V₁ = 0.5 L
We will take the 0.5 L from the 1M stock solution of KF inorder to form 0.5 M KF of 1L.
Subject is actually science please answer giving brainliest also!
Answer:
B. They are too small to be seen with only our eyes.
Explanation:
Why? Because if we could have the ability to see the particles that make-up an object, it may look weird. All particles (the types that make up matter) can not be seen with our eyes because they are too small.
Hope this helped!
Pls consider Brainliest-ing my answer! It would help and mean a lot! ; )
What is the maximum amount of water (in grams) that can be removed from 15ml of toluene by the addition?
Complete Question
Magnesium sulfate forms a hydrate with the formula [tex]MgSO_4. 7H_20[/tex]. What is the maximum amount of water (in grams) that can be removed from 15 ml of toluene by the addition of 200 mg of anhydrous magnesium sulfate? The molar mass of [tex]MgSO_4[/tex] is 120.4 g/mol; H20 = 18 g/mol.
Answer:
The value is [tex]z = 0.2093 \ g[/tex] of [tex]H_2O[/tex]
Explanation:
From the question we are told that
The volume of toluene is [tex]V = 15 mL[/tex]
The mass of anhydrous magnesium sulfate is [tex]m = 200m g = 200 *10^{-3} \ g[/tex]
The formula of the hydrate is [tex]MgSO_4. 7H_20[/tex]
The molar mass of [tex]MgSO_4[/tex] is [tex]z =120.4 \ g/mol[/tex]
From the formula given we see that
1 mole of [tex]Mg SO_4[/tex] wil remove 7 moles of [tex]H_2O[/tex] to for the given formula
Hence
120.4 g (1 mole) will remove 7 moles (7 * 18 g = 126 g ) of [tex]H_2O[/tex] to for the given formula
Therefore 1 g of [tex]Mg SO_4[/tex] x g of [tex]H_2O[/tex]
So
[tex]x = \frac{x]126 * 1}{ 120.4 }[/tex]
=> [tex]x = 1.0465 \ g [/tex]
From our calculation we obtained that
1 g of [tex]Mg SO_4[/tex] will remove [tex]x = 1.0465 \ g [/tex] of [tex]H_2O[/tex]
Then
[tex]200 *10^{-3} \ g[/tex] of [tex]Mg SO_4[/tex] will remove z g of [tex]x = 1.0465 \ g [/tex] of [tex]H_2O[/tex]
So
[tex]z = 200 *10^{-3} * 1.0465[/tex]
=>[tex]z = 200 *10^{-3} * 1.0465[/tex]
=>[tex]z = 0.2093 \ g[/tex] of [tex]H_2O[/tex]
Radioactive americium-241 is used in household smoke detectors and in bone mineral analysis.
Give the number of electrons, protons, and neutrons in an atom of americium-241.
Answer:
Electrons- 95
Protons- 95
Neutrons-146
Explanation:
An atoms is made up of three fundamental particles; electrons, protons and neutrons,
Americium belongs to the f block in the periodic table. It is an actinide element.
An atom of Am-241 contains 95 protons, 95 electrons and 146 neutrons.
What is cellulose and what does it do?
Answer:
Cellulose is an organic compound with the formula , a polysaccharide consisting of a linear chain of several hundred to many thousands of β linked D-glucose units. Cellulose is an important structural component of the primary cell wall of green plants, many forms of algae and the oomycetes.
Explanation:
Answer:
Hope this helped.
Explanation:
Cellulose is a molecule, consisting of hundreds – and sometimes even thousands – of carbon, hydrogen and oxygen atoms. Cellulose is the main substance in the walls of plant cells, helping plants to remain stiff and upright. Humans cannot digest cellulose, but it is important in the diet as fibre.
Does anyone know this?
Answer:
B
Explanation:
The entropy will increase as the ice melts. While in a solid state (ice) entropy is lower because the molecules are ordered and in a set position. As the ice melts the molecular have a larger area to roam. When going from a solid state to a liquid state, entropy rises. When going from a liquid state to a gaseous state, entropy rises.
• Why does a carpeted floor feel warmer to bare feet than tile or wood even though
all surfaces are the same temperature?
As air undergoes conduction better in tile than in carpet, hence a carpeted floor feel warmer to bare feet than tile or wood even though all surfaces are the same temperature.
What is conduction?
Conduction is defined as a process as a means of which heat is transferred from the hotter end of the body to it's cooler end.Heat flows spontaneously from a body which is hot to a body which is cold.
In the process of conduction,heat flow is within the body and through itself.In solids the conduction of heat is due to the vibrations and collisions of molecules while in liquids and gases it is due to the random motion of the molecules .
When conduction takes place, heat is usually transferred from one molecule to another as they are in direct contact with each other.There are 2 types of conduction:1) steady state conduction 2) transient conduction.According to the type of energy conduction is of three types:
1) heat conduction
2) electrical conduction
3)sound conduction
Learn more about conduction,here:
https://brainly.com/question/12136944
#SPJ2
In an experiment, Lydia added 50 grams of sugar to 200 milliliters of water. She stirred the mixture, and the sugar eventually dissolved into the water and couldn’t be seen. The volume of the solution increased, but there was no noticeable change in color, odor, or temperature. Which statement best describes what happened in Lydia’s experiment? A. A physical change took place during this experiment. B. A chemical change took place during this experiment. C. A compound was formed during this experiment. D. A heterogeneous mixture was formed during this experiment.
Answer:
A. A physical change took place during this experiment
Explanation:
A physical change is one of the changes that occurs in a reaction. It is a kind of change characterized by no change to the chemical composition of the substances involved. It involves reactions such as melting, change of state, freezing, boiling etc.
According to this question, Lydia added 50 grams of sugar to 200 milliliters of water, then, stirred the mixture, until the sugar eventually dissolved into the water and couldn’t be seen. This change involved no change in color, odor, or temperature. Hence, Lydia's experiment represents a PHYSICAL CHANGE because only DISSOLUTION occured.
In an experiment, Lydia added 50 grams of sugar to 200 milliliters of water. She stirred the mixture, and the sugar eventually dissolved into the water and couldn’t be seen. The volume of the solution increased, but there was no noticeable change in color, odor, or temperature. Which statement best describes what happened in Lydia’s experiment? A. A physical change took place during this experiment. B. A chemical change took place during this experiment. C. A compound was formed during this experiment. D. A heterogeneous mixture was
Answer:
A
Explanation:
Which main type of sedimentary rock forms from solutions?
chemical
clastic
organic
shale
Answer:
The answer is a.
Explanation:
I took the quiz and took notes.
If your questions were the same as mine the answers would be below
Question 1: Which process moves small rock pieces during sedimentary rock formation?
Answer: erosion
------------------------------------
Question 2: Which statement describes one role of minerals during cementation?
Answer: Minerals bind sediments together.
------------------------------------
Question 3: Which correctly lists three factors that contribute to weathering of rock?
Answer: ice, water, wind
------------------------------------
Question 4: The picture shows a sedimentary rock that was formed from crystalized minerals. This is the picture in text form - Orangish red rock with coarse texture.
Actual question number 4: Which type of sedimentary rock is shown?
Answer: chemical
------------------------------------
Question 5: Which type of sedimentary rock forms from weathered sediment?
Answer: clastic
------------------------------------
Question 6: Which statement describes deposition?
Answer: Deposition happens after weathering and erosion.
------------------------------------
Question 7: Which correctly lists three agents that loosen and carry away rock during the erosion process?
Answer: plants, animals, wind
------------------------------------
Question 8: Which processes contribute to the formation of chemical sedimentary rocks?
Answer: Minerals dissolve and crystalize.
------------------------------------
Question 9: The image shows an example of a sedimentary rock. This is the picture in text form - Brown rock containing small pieces of different materials.
Actual question: Which feature of this rock demonstrates that it is a clastic sedimentary rock?
Answer: visible rock fragments
------------------------------------
Question 10: Which process squeezes layers of sediment together?
Answer: compaction
------------------------------------------------------------------------
Pictures used in question four and question nine are in the attached pictures.
God bless! :D
The pair of elements with the most familiar chemical properties are
A. Mg and S
B. Ca and Br
C. Mg and Ca
D. S and Ar
Answer:
C. mg and Ca
Explanation:
These chemical elements are collectively called as the Alkaline Earth Metals. Calcium and Magnesium are two of the six elements that fall into this category. The outer electronic structure of all these elements is similar due to which they all have similarity in their chemical and physical properties. They are all shiny, though fairly soft but still harder than alkali metals. Further, these are usually white or silvery coloured elements.They react with water to form hydrogen gas and metal hydroxide and with oxygen, they form oxides.
The molar mass of bismuth (Bi) is 208.98 g/mol.
Calculate the mass in grams of a sample of Fli containing 7.35 x 1023 atoms.
Write your answer using three significant figures.
g Bi
Answer:
7.35 x 1023 atoms.
Explanation:
The mass in grams of a sample of Fli containing 7.35 × 10^23 atoms should be 255 grams.
Calculation of mass:Since The molar mass of bismuth (Bi) is 208.98 g/mol.
And, 1 mole Bi = 208.98 g/mol = 6.023×10^23 no of atoms
So, the mass in grams should be
= ( 208.98 g/mol ×7.35 × 10^23) ÷ (6.023×10^23)
= 255 grams.
Learn more about the mass here; https://brainly.com/question/20512522
Calculate the solubility of Zn(OH)2 in water at 25°C.
Answer:
The solubility of Zn(OH)₂ at 25ºC is 1.96x 10⁻⁶,
Explanation:
The solubility is the maximum amount of a solute that can be dissolved in a certain volume of liquid (usually water) at a given temperature.
First, we write the dissolution reaction of Zn(OH)₂ in water, which is:
Zn(OH)₂ (s) ⇄ Zn²⁺ + 2 OH⁻
We know that the Kps, that is, the dissolution equilibrium constant for this compound at 25ºC is 3.0x 10⁻¹⁷.
Therefore, the Kps is:
Kps= [Zn²⁺][OH⁻]² (since Zn(OH)₂ is solid, it is not accounted for).
Given the reaction, we can see that for every single Zn²⁺ ion, two OH⁻ ions are produced. Therefore, if the concentration of Zn²⁺ dissolved is x M, the concentration of OH⁻ dissolved will be 2x M.
Substituting these values in Kps, we have:
[Zn²⁺][OH⁻]² = (x)(2x)² = 3.0x 10⁻¹⁷
4x³ = 3.0x 10⁻¹⁷
x= ∛ (3.0x 10⁻¹⁷ ÷ 4)
x= 1.96x 10⁻⁶
Therefore, the molar solubility of Zn(OH)₂ at 25ºC will be 1.96x 10⁻⁶.
PLEASE HELP I WILL GIVE U BRAINLIEST :)
This chart shows four atoms, labeled W, X, Y, and Z. These atoms can combine with each other to form molecules.
Which combination of atoms will form a molecule, but not a compound?
A. W and X
B. X and Y
C. W and Z
D. Y and Z
Answer:
W and Z
Explanation:
Atoms of the SAME element OR two atoms of DIFFERENT elements will form a MOLECULE.
E.g. 2 atoms of hydrogen + 1 atom of oxygen => 1 molecule of water. This 1 molecule of water can also be called a compound.
Also, 2 atoms of Oxygen can combine to form 1 molecule of Oxygen. This 1 molecule of Oxygen cannot be referred to as a compound.
Atoms of DIFFERENT elements form a COMPOUND.
Therefore, compounds are molecules, but molecules are not compounds.
Thus, the combination of atoms that will form a molecule, but not a compound is:
W(oxygen) + Z(oxygen) = molecule
Answer:
W and Z
Explanation:
How does the temperature of the core compare to the Sun?
The core is colder the surface of the Sun.
o The Sun is hotter than the core.
The core may be as hot as the surface of the Sun.
The core is hot during the day but cooler at nighttime.
1. How does thermal energy move between objects?
A. It moves from objects of lower mass to objects with higher mass
B. It moves from objects of higher mass to object with lower mass
C. It moves from objects of lower temperature to objects with higher temperature
D. It moves from objects of higher temperatures to objects with lower temperature
Answer:
D
Explanation:
Answer:
D
Explanation:
So. Radiation happens when heat moves as energy waves, called infrared waves, directly from its source to something else.... When the heat waves hits the cooler thing, they make the molecules of the cooler object speed up.
Percent error of 76.48
Answer:
Explanation:
i’m not sure but I think it’s 7648%
What is the standard enthalpy of the reaction:
2 NO(g) + O2(g) → 2 NO2(g)?
Answer:
-116.2 kJ
Explanation:
Calculate the concentration of buffer components present in 210.00 mL of a buffer solution that contains 0.300 M NH4Cl and 0.300 M NH3 immediately after the addition of 1.00 mL of 6.00 M HNO3.
Answer:
[NH3] = 0.270M
[NH4Cl] = 0.327M
Explanation:
The HNO3 will react with the weak base, NH3, as follows:
HNO₃ + NH₃ → NH₄⁺ + NO₃⁻
Initial moles of each specie of the buffer:
NH3 = NH4⁺ 0.210L * (0.300mol/L) = 0.063moles
The moles added of HNO3 = Additional moles of NH4Cl and the moles substracted of NH3:
0.001L * (6mol / L) = 0.006 moles.
After the addition:
Moles NH3 = 0.063mol - 0.006mol = 0.057moles
Moles NH4Cl = 0.063mol + 0.006mol = 0.0069moles
And their concentrations are:
[NH3] = 0.057moles / 0.211L = 0.270M
[NH4Cl] = 0.069moles / 0.211L = 0.327M
Question
The total kinetic energy of the tiny particles that make up matter
Can you guys help me answer question 5 on homogeneous mixture tysm
Answer:
Hope this helped :) good luck! ❤️
Explanation:
A coolant solution is a homogeneous mixture because the coolant particles are not chemically combined with the water (keep their properties) and they are evenly distributed throughout the water.
A solution is made by mixing of 42.g water and 77.g of acetic acid HCH3CO2. Calculate the mole fraction of water in this solution.
Moles of [tex]H_2O[/tex] ,
[tex]n_{H_2O}=\dfrac{42}{2\times 1 + 16}=\dfrac{42}{18}\\\\n_{H_2O}=2.33\ moles[/tex]
Moles of acetic acid [tex]HCH_3CO_2[/tex] ,
[tex]n_{A.A}=\dfrac{77}{1 + 12 + 3 + 12 + 16\times 2}=\dfrac{77}{60}\\\\n_{A.A}=1.28\ moles[/tex]
Mole fraction of water :
[tex]M.F_{H_2O}=\dfrac{n_{H_2O}}{n_{H_2O}+n_{A.A}}\\\\M.F_{H_2O}=\dfrac{2.33}{2.33+1.28}\\\\M.F_{H_2O}=0.645[/tex]
Therefore, mole fraction of water in this solution is 0.645 .
Hence, this is the required solution.
The system is originally at equilibrium with [butane] = 1.0 M and [isobutane] = 2.5 M.If 0.50 mol/L of isobutane is suddenly added and the system shifts to a new equilibrium position, what is the equilibrium concentration of butane?
Answer:
1.14 M
Explanation:
Let's consider the following reaction.
butane ⇄ isobutane
We can use the concentrations at equilibrium to calculate the equilibrium constant.
Kc = [isobutane] / [butane]
Kc = 2.5 / 1.0
Kc = 2.5
If we add 0.50 M of isobutane, we get [isobutane] = 2.5 + 0.50 = 3.0 M.
This will be an initial concentration in an ICE chart.
butane ⇄ isobutane
I 1.0 3.0
C +x -x
E 1.0+x 3.0-x
The equilibrium constant is:
Kc = 2.5 = [isobutane] / [butane]
2.5 = (3.0-x) / (1.0+x)
2.5 + 2.5x = 3.0-x
x = 0.14
The equilibrium concentration of butane is:
[butane] = 1.0+x = 1.14 M
2. (6 pts) In a reaction, 235 mL of 1.50 M HCl solution reacts completely with an excess amount of
aluminum. If the hydrogen gas is collected over water in a container with a volume of 3.60 L and at a
temperature of 25.0 °C, calculate the pressure in the container. The vapor pressure of water is 23.78
mmHg (Table 6.4, page 232).
2Al(s) + 6HCl(aq) + 3H2(g) + 2AlCl3(aq)
Answer:
[tex]P=1.23atm[/tex]
Explanation:
Hello.
In this case, since the total pressure in the container includes the pressures of both hydrogen and water:
[tex]P=P_{H_2}+P_{H_2O}[/tex]
For the reacting solution of HCl, based on the 6:3 mole ratio with hydrogen in the chemical reaction, we can next compute the yielded moles o hydrogen:
[tex]n_{H_2}=0.235L*1.50\frac{molHCl}{L}*\frac{3molH_2}{6molHCl} =0.176molH_2[/tex]
Then, by using the ideal gas equation we compute the pressure of hydrogen for the collected 3.60 L at 25.0 °C (298.15 K):
[tex]P_{H_2}=\frac{n_{H_2}RT}{V} =\frac{0.176mol*0.082\frac{atm*L}{mol*K}*298.15K}{3.60L}=1.20atm[/tex]
Finally, since the vapor pressure of water in at is 0.03129, the total pressure is then:
[tex]P=1.20atm+0.03129atm\\\\P=1.23atm[/tex]
Best regards!
Help plz!!!!!!!!!!!!!!!
Answer:
Albert Einstein proposed that a beam of light is not a wave propagating through space, but a collection of discrete wave packets—photons.
Explanation:
So the right answer is the first one.
Please choose the best description, or definition for Principle of Fossil Correlation
Answer:
states that rock layers with the same unique groupings of fossils are of the same geologic age.
Explanation:
The principle of fossil correlation states that the presence of similar fossils of dead organisms in rock layers indicates that the organisms under investigation must have existed around the same geologic time. This principle can be used in dating the periods when the organism being studied lived.
The geological age system follows a chronological format in tracking the age of an item under study by grouping the time periods that organisms lived into strata.
Which of the following statements is true during a solar eclipse?
The moon's light is blocked by the Earth.
The Sun's light is blocked by the Earth.
The Sun's light is blocked from another planet.
The Sun's light is blocked by the Moon.
Answer:
The sun's light is blocked by the moon.
Explanation:
During the eclipse, the moon rotates right in front of the sun, that's why the eclipse is so rare and only happens every four(?) years/
Suppose a student needs to standardize a sodium thiosulfate, Na2S2O3,Na2S2O3, solution for a titration experiment. To do so, he or she will react it with a solution of iodine. The student adds a 1.00 mL1.00 mL aliquot of 0.0200 M KIO30.0200 M KIO3 solution to a flask, followed by 3 mL3 mL of distilled water, 0.2 g0.2 g of solid KI,KI, and 1 mL H2SO4.1 mL H2SO4. The student then titrates the solution with sodium thiosulfate solution in order to determine the exact concentration of Na2S2O3.Na2S2O3. The end point of the titration is reached after 0.90 mL0.90 mL of Na2S2O3Na2S2O3 is dispensed from a microburet. What is the concentration of the standard sodium thiosulfate solution?
Answer:
0.133
Explanation:
reaction between KIO3 and KI in acidic medium
IO3⁻ +5I⁻ +6h⁺ → 3I₂ + 3H₂O
I₂ reacts with thiosulphate
NaS₂O₃ → 2Na⁺ + S₂O₃²⁻
net reaction
IO⁻₃ + 6H⁺ + 6S₂O₃³⁻ → I⁻ + 3S₄O₆²⁻ + 3H₂O
mole of KIO₃
= molarity x volume
[tex]\frac{0.02mol}{L} *0.01L[/tex]
= 0.00002mol
a mole of KIO₃ has reaction with 6 mol of S₂O₃²⁻
= 2x6x10⁻⁵
= 0.00012 mol
volume = 0.90 ml
1 ml = 0.001L
0.90ML = 0.0009L
to get concentration,
molarity/volume
= 0.00012/0.0009
= 0.133m
The concentration of the standard sodium thiosulfate solution is ; 0.133
The net chemical reaction equation
IO₃⁻ + 6H⁺ + 6S₂O₃³⁻ ----> I⁻ + 3S₄O₆²⁻ + 3H₂O
First step : Determine the moles of KIO₃
number of moles = molarity * volume
= 0.02 mol / L * 0.01 L
= 0.00002 mol
From the net chemical reaction equation
one ( 1 ) mole of KIO₃ reacts with 6 moles of S₂O₃²⁻
∴ number of moles in the reaction = 6 * 0.00002 = 0.00012 mol.
Final step : Determine the concentration of sodium thiosulfate solution
Given Volume = 0.90 ml = 0.0009 L
∴ concentration of sodium thiosulfate solution
= 0.00012 / 0.0009 = 0.133
Hence we can conclude that The concentration of the standard sodium thiosulfate solution is ; 0.133
Learn more : https://brainly.com/question/15271672
What happens when the sound waves released by a bat hit an object?
O The sound waves are diffused.
O The sound waves are reflected.
O The sound waves are refracted.
O The sound waves are absorbed.
Answer:
O The sound waves are reflected.
Explanation:
When sound waves released by a bat hits an object, the sound waves are reflected back.
Bats used sound reflection for echolocation to determine the position of nearby objects.
Also, they use it to determine the shape and size of objects.
The mechanism where bats use sound to determine location is known as echolocation. The bat picks up the reflected sound and projects the location of their targets.Answer:
B
The sound waves are reflected.
Explanation:
Which statements about mixture is FALSE?
A. The ingredients ofvthe mixture keep their physical properties
B. Mixture components can be separated
C. All mixtures are food or drink only
D. A mixture contains more than one ingredients