When one skater pushes another skater, how do they move? how can you predict the specific motion that will occur?

Thank you for offering your lab report to others! However, it's important to remember that sharing your work can lead to academic misconduct if others use your report as their own.

It's important for everyone to complete their assignments independently and to not share their work with others.

It's also important to understand the concepts behind Newton's Laws of Motion rather than relying solely on someone else's report.

That being said, if anyone is struggling with the lab, it's best to seek help from the instructor or a tutor. Good luck with your assignment!

To know more about academic misconduct refer here

https://brainly.com/question/25160479#

#SPJ11

Single convex lenses can create real and inverted images of distant objects, with size depending on object distance and focal length. The image appears on the opposite side of the lens from the object, between the lens and its focus.

Single convex lenses can be used to make real and inverted images of distant objects. The size of the image depends on the distance of the object from the lens and the focal length of the lens.

If the object is very far away from the lens, the image will be small. The image will occur on the side of the lens opposite to the object and between the lens and its focus.

The image will be real and inverted because the convex lens converges the light rays that pass through it.

To know more about convex lens  , refer here:

https://brainly.com/question/27087947#

#SPJ11

The force of attraction between the two masses is [tex]3.335 \times 10^{-8} N[/tex].

The force of attraction between two masses is given by the gravitational force equation, which is expressed as:

[tex]$F = G \cdot \frac{m_1 \cdot m_2}{r^2}$[/tex]

where F is the force of attraction, G is the gravitational constant ([tex]$6.67 \times 10^{-11} , \text{N}\cdot\text{m}^2/\text{kg}^2$[/tex]), [tex]m_1[/tex]1 and [tex]m_2[/tex] are the masses of the two objects, and r is the distance between the centers of the two masses.

In this case, [tex]m_1[/tex] = 100 kg, [tex]m_2[/tex] = 50 kg, and r = 100 m. Substituting these values into the equation, we get:

[tex]$F = 6.67 \times 10^{-11} , \text{N}\cdot\text{m}^2/\text{kg}^2 \cdot \frac{(100 , \text{kg}) \cdot (50 , \text{kg})}{(100 , \text{m})^2}$[/tex]

[tex]F = 3.335 \times 10^{-8} N[/tex]

It is worth noting that the force of attraction between the two masses is very small, which is due to the large distance between them. The gravitational force decreases rapidly with distance, so as the distance between the two masses increases, the force of attraction decreases as well.

To learn more about force

https://brainly.com/question/13191643

#SPJ4

It will take approximately 6.89 × 10^-5 seconds (or 68.9 microseconds) for the water to boil.

To determine how long it will take for the water to boil, we need to consider the decay of the radium isotope and calculate the time it takes for the heat released from the radioactive decay to raise the temperature of the water to its boiling point.

First, let's calculate the number of radium atoms in the 1.0 g cube of 223Ra. To do this, we'll use the molar mass of radium-223 (223 g/mol) and Avogadro's number (6.022 × 10^23 atoms/mol):

Number of radium atoms = (1.0 g) / (223 g/mol) × (6.022 × 10^23 atoms/mol)

= 2.69 × 10^21 atoms

Each radium-223 atom decays by emitting an alpha particle (helium nucleus) and transforms into a different element over time. The energy released during this decay process contributes to heating the surrounding environment.

Now, we need to calculate the total energy released by the decay of the 2.69 × 10^21 radium atoms. The energy released per decay of radium-223 is approximately 5.69 MeV (million electron volts).

Total energy released = (2.69 × 10^21 atoms) × (5.69 MeV/atom) × (1.6 × 10^-13 J/MeV)

= 2.44 × 10^9 J

Next, we need to calculate the specific heat capacity of water. The specific heat capacity of water is approximately 4.18 J/g⋅°C.

To raise the temperature of the water from 16°C to its boiling point, we need to calculate the amount of heat required:

Heat required = (460 mL) × (1 g/mL) × (4.18 J/g⋅°C) × (100°C - 16°C)

= 1.68 × 10^5 J

Now, we can determine the time required for the water to reach its boiling point. We divide the heat required by the total energy released per second:

Time required = (1.68 × 10^5 J) / (2.44 × 10^9 J/s)

≈ 6.89 × 10^-5 s

Therefore, it will take approximately 6.89 × 10^-5 seconds (or 68.9 microseconds) for the water to boil.

To learn more about isotope, refer below:

https://brainly.com/question/11680817

#SPJ11

The wires would need to be 4 times longer, or 48 meters, for the period to be doubled.

The motion of the trapeze in the Flying Graysons circus act can be approximated as simple harmonic motion, in which the restoring force is proportional to the displacement from the equilibrium position.

The period of a simple harmonic motion for a pendulum or a trapeze swing is given by the equation T = 2π√(L/g), where T is the period, L is the length of the wire, and g is the acceleration due to gravity.

To double the period, we need to solve for the new length of the wire, given that T' = 2T.

2T = 2π√(L'/g)

T = π√(L/g)

2π√(L/g) = π√(L'/g)

Squaring both sides, we get:

4π^2(L/g) = π^2(L'/g)

L' = 4L

L = 12m (Given)

L' = 4*12

L' = 48 m

To know more about the simple harmonic motion, click here;

https://brainly.com/question/30404816

#SPJ11

Answer:

Uranus

Explanation:

The speed of the small stone lodged in the tire's tread is approximately 10.47 m/s, and its acceleration is approximately 219.35 m/s².

We need to find the speed and acceleration of a small stone lodged in the tread of a tire with a 0.500 m radius, rotating at 200 revolutions per minute.

First, let's convert the revolutions per minute (rpm) to radians per second (rad/s):
200 rpm * (2π radians/1 revolution) * (1 minute/60 seconds) ≈ 20.94 rad/s

Now, we can find the linear speed (v) of the stone using the formula:
v = rω, where r is the radius, and ω is the angular velocity in rad/s.
v = 0.500 m * 20.94 rad/s ≈ 10.47 m/s

Next, we'll find the centripetal acceleration (a_c) of the stone using the formula:
a_c = rω²
a_c = 0.500 m * (20.94 rad/s)² ≈ 219.35 m/s²

For more about speed:

https://brainly.com/question/7359669

#SPJ11

The most likely reason for not seeing the Power Pivot tab is that the add-in is not enabled in Excel.

By default, the Power Pivot add-in is not enabled in Excel, and it needs to be enabled manually.

To enable the Power Pivot add-in, go to the File tab in Excel, select Options, and then select Add-Ins. In the Manage box, select COM Add-ins, and then select Go.

In the COM Add-Ins dialog box, select Microsoft Power Pivot for Excel, and then select OK.

After enabling the add-in, the Power Pivot tab should now be visible in Excel.

To know more about Power Pivot , refer here:

https://brainly.com/question/30087051#

#SPJ11

Answer:

They can replace lost electrolytes.

Answer: One benefit of sport drinks is that they can replace lost electrolytes.

Explanation: During exercise or physical activity, the body loses electrolytes such as sodium, potassium, and magnesium through sweat. Sport drinks are formulated with electrolytes and carbohydrates to help replenish the body and maintain hydration levels. This can be particularly beneficial for athletes or individuals engaging in prolonged physical activity. However, it is important to note that sport drinks should not be consumed excessively as they can be high in sugar and calories.

The strength of two dams is compared by calculating their potential energy based on the height of the water they hold back. The Very Big Dam has greater potential energy than the Really Big Dam, making it stronger.

To determine which dam is stronger, we need to compare their potential energy due to the water they are holding back. The potential energy of the water is given by the formula:

PE = mgh

where PE is the potential energy, m is the mass of the water, g is the acceleration due to gravity, and h is the height of the water.

Since the dams are the same width, we can assume they have the same mass of water. Therefore, the potential energy depends only on the height of the water.

The height of the water in the Really Big Dam is 60 feet, and the lake extends back one-quarter of a mile or 1320 feet. Therefore, the potential energy of the water is:

PE1 = mgh = (mass of water) x g x h

[tex]PE1 = (1000 ft \times 1320 ft \times 60 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]

The height of the water in the Very Big Dam is 50 feet, and the lake extends back two miles, or 10560 feet. Therefore, the potential energy of the water is:

PE2 = mgh = (mass of water) x g x h

[tex]PE2 = (1000\; ft \times 10560\; ft \times 50 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]

Calculating the two potential energies, we find that PE2 is greater than PE1. Therefore, the Very Big Dam had to be constructed to be strongest.

In summary, to determine which dam is stronger, we compare its potential energy due to the water they are holding back. Since the dams have the same width, the potential energy depends only on the height of the water.

Calculations show that the potential energy of the water held by the Very Big Dam is greater than the Really Big Dam, making it the stronger of the two dams.

To know more about potential energy refer here:

https://brainly.com/question/30672627#

#SPJ11

The principle of superposition can be used to determine the net effect of multiple individual effects on a physical system. It is a fundamental principle in physics and is used to analyze the behavior of waves, electric and magnetic fields, and other physical phenomena.

In essence, the principle of superposition states that when two or more waves, forces, or fields interact with each other, the net effect is the sum of the individual effects of each wave, force, or field.

This principle applies to both linear and nonlinear systems, and it is a crucial tool for understanding complex physical systems.

For example, the principle of superposition can be used to determine the resulting wave pattern when two or more waves of different frequencies, amplitudes, and directions interact with each other. It can also be used to calculate the net electric or magnetic field at a given point in space due to multiple charges or currents.

To know more about principle of superposition refer here

https://brainly.com/question/11876333#

#SPJ11

Answer and Explanation:

According to the principle of maximum density, water has its highest density at 4°C. This means that 1kg of water will occupy minimum space at a temperature of 4°C. At this temperature, the volume of water is at its lowest, and any further cooling or heating will cause it to expand.

This principle is due to the unique properties of water molecules. As the temperature decreases from room temperature, the molecules begin to slow down and move closer together. However, below 4°C, hydrogen bonding between the molecules begins to dominate, causing them to form a crystal-like structure and expand.

At 0°C, water freezes and expands by about 9%, making it less dense than liquid water. At 100°C, water boils and turns into steam, which occupies much more space than liquid water. At -4°C, the water is still in a liquid state but is not at its maximum density.

In conclusion, the correct answer is 4°C, as this is the temperature at which 1kg of water will occupy minimum space.

1 kg of water will occupy minimum space of 1 m³at 25°C.

Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity. when we add egg yolk into the water, egg yolk has greater density than water( 997 kg/m³), because of higher density of egg yolk it contains higher mass in same volume as water. hence due to higher mass higher gravitational force is acting on the egg yolk therefore it goes down on the inside the water. water will float upon the egg yolk. same situation we have seen when we spread oil in the water. ( in that case water has higher density than oil. that's why oil floats on the water)

To know more about Density :

https://brainly.com/question/29775886

#SPJ2.

A submarine diving to a depth of 500 m would experience a pressure of 5,068,625 Pa on its hull, which is approximately 50 times greater than the atmospheric pressure at sea level.

a) When a submarine dives to a depth of 500 m, the pressure on its hull increases due to the weight of the water above it.

The pressure at this depth can be calculated using the formula [tex]P = \rho gh[/tex], where ρ is the density of seawater, g is the acceleration due to gravity, and h is the depth.

Plugging in the values, we get P = (1025 kg/m³)(9.81 m/s²)(500 m) = 5,068,625 Pa.

b) To determine how many times greater the pressure is at a depth of 500 m compared to the surface, we can divide the pressure at 500 m by the atmospheric pressure at sea level.

Converting 14.7 psi to Pa, we get 101,325 Pa. Dividing 5,068,625 by 101,325 gives us approximately 50 times greater.

In summary, a submarine diving to a depth of 500 m would experience a pressure of 5,068,625 Pa on its hull, which is approximately 50 times greater than the atmospheric pressure at sea level.

To know more about pressure refer here:

https://brainly.com/question/28907914#

#SPJ11

It takes 10 seconds for the stone to travel 294 m below the point of projection. That's how long it take to travel.

The equation to use to find how long it take to travel 294m below the point of projection is:

4.9t² - 19.6t - 294 = 0

We need the quadratic equation

t = [-b ± √(b² - 4ac)] / (2a)]

a = 4.9, b = -19.6, and c = -294.

t = [19.6 ± √((-19.6)² - 44.9(-294))] / (2×4.9)

t = [19.6 ±√384.16 + 5745.6)] / 9.8

t = [19.6 ± √(6129.76)] / 9.8

t = [19.6 ± 78.3] / 9.8

The possible answers are;

t1 = (19.6 + 78.3) / 9.8 = 10 seconds

t2 = (19.6 - 78.3) / 9.8 = -6 seconds

considerinf that the answer cannot be in the negative, therefore t₁  is the answer.

Find more exercises on how long it takes to travel;

https://brainly.com/question/4836382

#SPJ1

Charged objects in an electric field experience attractive or repulsive forces, as shown by the electric field lines. An external electric field can also cause charged objects to move in a specific direction.

PART A) After adding the charged object to the system, the electric field lines around it are observed to be directed radially outwards from the object, indicating a positive charge.

The length of the field lines also indicates that the charge on the object is strong. This is because the field lines are closer together and longer, which indicates that the strength of the electric field is higher. Therefore, the charge on the object is positive.

PART B) When the charged object is set in motion, the field lines move along with the object, remaining in close proximity to it. The lines become compressed in the front of the object and elongated behind the object, indicating that the electric field is stronger in front of the moving object than behind it.

PART C) When another charged object is added to the field, the electric field lines between the two objects behave as though they are attracted to one another.

This indicates that the new object has an opposite charge to the original object, resulting in attractive forces between the two. The field lines of both objects tend to converge, indicating that the field strength has increased due to the addition of a second charged object.

PART D) After changing the sign of the charge on the new object and adding it to the field, the two objects move towards each other, as the forces between them are now attractive.

The electric field lines between the two objects also converge, indicating a stronger field strength between the two objects.

PART E) When an external electric field is applied to the system, the two objects experience a net force in the direction of the external field, and they move in that direction.

The field lines between the two objects also become elongated in the direction of the external field. This occurs because the electric field of the external field vector superimposes the field of the two objects, and it becomes the dominant field.

In summary, adding charged objects to an electric field creates attractive or repulsive forces between them, which is indicated by the behavior of the electric field lines.

An external electric field can also influence the behavior of charged objects in an electric field, causing them to move in a particular direction.

To know more about electric field refer here:

https://brainly.com/question/27897603#

#SPJ11

The speed of the block after it has moved 2.9 m is approximately 5.14 m/s.

We can use the work-energy principle to find the speed of the block after it has moved 2.9 m. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy.

Since there is no friction acting on the block, the net work done on it is equal to the work done by the applied force:

Net work = Work done by applied force = Fd

where F is the applied force and d is the distance moved by the block.

The change in kinetic energy of the block is given by:

Δ[tex]K = 1/2 mv^2 - 1/2 m(0)^2 = 1/2 mv^2[/tex]

where m is the mass of the block and v is its final velocity.

Since the net work done on the block is equal to its change in kinetic energy, we can set these two expressions equal to each other:

[tex]Fd = 1/2 mv^2[/tex]

Solving for v, we get:

[tex]v = \sqrt{(2Fd/m)[/tex]

Substituting the given values, we get:

[tex]v = \sqrt{(2 *12.3 N * 2.9 m / 2.5 kg)} = 5.14 m/s[/tex]

To know more about work-energy principle refer here

https://brainly.com/question/28043729#

#SPJ11

The wavelength of the radio waves is 2.93 meters, which corresponds to option A.

To find the wavelength of a radio wave, we can use the formula:

wavelength = speed of light / frequency

This formula tells us that the wavelength of a radio wave is inversely proportional to its frequency. In other words, if the frequency of a radio wave is high, its wavelength will be shorter, and if its frequency is low, its wavelength will be longer.

In the given question, we are told that a radio station broadcasts signals at a frequency of 102.3 MHz or 1.023 x 10⁸ Hz. We are also given the speed of light in air, which is 2.997 x 10⁸ m/s. Using the above formula, we can calculate the wavelength of these radio waves.

Substituting the values in the formula, we get:

wavelength = 2.997 x 10⁸ m/s / 1.023 x 10⁸ Hz

= 2.93 meters

Option A is correct answer.

To know more about wavelength, here

brainly.com/question/31143857

#SPJ4

The image distance formed by the diverging lens is 9.335cm.

To determine the image distance formed by a diverging lens with a focal length of -12.8cm, we can use the thin lens formula:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the distance from the object to the lens, and di is the distance from the lens to the image.

Substituting the given values, we get:

1/-12.8cm = 1/34.5cm + 1/di

Simplifying and solving for di, we get:

1/di = 1/-12.8cm - 1/34.5cm

1/di = -0.078125 cm^-1 - 0.02898550724637681 cm^-1

1/di = -0.1071105072463768 cm^-1

di = 9.335 cm

It's worth noting that the negative sign for the focal length indicates that the lens is a diverging lens.

The positive sign for the object distance indicates that the object is located on the same side of the lens as the incident light,

while the negative sign for the image distance indicates that the image is formed on the opposite side of the lens as the incident light, which is typical for a diverging lens.

To know more about lens formula refer here

https://brainly.com/question/30241648#

#SPJ11

The statement is true.

If the particles ejected from the Sun during a coronal mass ejection (CME) are directed towards Earth, they can reach our planet.

Coronal mass ejections are powerful eruptions of plasma and magnetic field from the Sun's corona. These ejections can release a large amount of highly energetic particles, including protons, electrons, and ions, into space.

When a CME is Earth-directed, it can travel through the interplanetary medium, which includes the solar wind, and reach our planet. The time it takes for the CME to reach Earth can vary, but typically it ranges from a day to a few days.

When the CME particles interact with the Earth's magnetic field, they can cause a variety of effects, including geomagnetic storms and enhanced auroral displays. The charged particles from the CME can also interact with the Earth's magnetosphere, leading to disturbances in the ionosphere and potential disruptions in satellite communication, power grids, and other technological systems.

Scientists and space agencies closely monitor CMEs and their potential impact on Earth using spacecraft and ground-based observatories to provide early warnings and forecasts of their arrival.

To know more about coronal refer here

https://brainly.com/question/96637#

#SPJ11

The marble's velocity just before it hits the floor is approximately 4.83 m/s.

To find the height of the lab table, we can use the following terms:

1. Horizontal velocity (Vx): 1.50 m/s
2. Horizontal distance (d): 0.70 m

First, we need to find the time it takes for the marble to fall 0.70m horizontally. We can do this using the equation: d = Vx * t

0.70 m = 1.50 m/s * t
t = 0.70 m / 1.50 m/s = 0.4667 s

Now, we can use this time to find the height (h) of the table using the vertical motion equation: h = 0.5 * g * t^2, where g is the acceleration due to gravity (9.81 m/s^2).

h = 0.5 * 9.81 m/s^2 * (0.4667 s)^2
h ≈ 1.067 m

So, the height of the lab table is approximately 1.067 meters.

To find the marble's velocity just before it hits the floor, we need to calculate its vertical velocity (Vy) using the equation: Vy = g * t

Vy = 9.81 m/s^2 * 0.4667 s
Vy ≈ 4.57 m/s

Now, we can find the marble's total velocity (V) using the Pythagorean theorem: V = √(Vx^2 + Vy^2)

V = √((1.50 m/s)^2 + (4.57 m/s)^2)
V ≈ 4.83 m/s

Therefore, the marble's velocity just before it hits the floor is approximately 4.83 m/s.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

The capacitance of a capacitor is: directly proportional to the area of the conductive plates and inversely proportional to the distance between them.

The capacitance (C) of a capacitor is the measure of its ability to store an electrical charge. It is dependent on the surface area (A) of the conductive plates, the distance (d) between these plates, and the permittivity (ε) of the dielectric material that separates the plates. The relationship between these factors can be described by the following formula:

C = ε × (A / d)

In this equation, the area (A) and the distance (d) play crucial roles in determining the capacitance of a capacitor. As the surface area of the plates increases, the capacitance also increases because a larger surface area allows for more charge to be stored. Conversely, as the distance between the plates decreases, the capacitance increases as well since the electric field between the plates becomes stronger, allowing for a higher charge storage capacity.

In summary, the capacitance of a capacitor is directly proportional to the area of the conductive plates and inversely proportional to the distance between them. By adjusting these factors, one can tailor the capacitance of a capacitor to meet specific requirements in various electronic devices and circuits.

To know more about capacitance of a capacitor, refer here:

https://brainly.com/question/26835976#

#SPJ11

In a 32-day period, a 512 mg sample of Iodine-131 will be reduced to 32 mg.
7
Since the half-life is 8 days, we can divide 32 days by the half-life to find the number of half-lives that have occurred: 32 days ÷ 8 days/half-life = 4 half-lives.

Now, for each half-life, the amount of Iodine-131 will decrease by half. After 1 half-life (8 days), 512 mg will become 256 mg. After 2 half-lives (16 days), it will be 128 mg. After 3 half-lives (24 days), it will be 64 mg. Finally, after 4 half-lives (32 days), the amount of Iodine-131 remaining in the sample will be 32 mg.

So, in a 32-day period, a 512 mg sample of Iodine-131 will be reduced to 32 mg.

To know more about sample, refer here:

https://brainly.com/question/30759604#

#SPJ11

A mass attached to the end of a spring is set in motion, the mass is observed to oscillate up and down, completing 24 complete cycles every 6. 00 s, the period of the oscillation: 0.25 seconds.

The mass attached to the end of a spring completes 24 cycles in 6.00 seconds. To determine the period of the oscillation, we need to find the time taken for one complete cycle. The period (T) is calculated by dividing the total time by the number of cycles, which is:

T = total time / number of cycles = 6.00 s / 24 cycles = 0.25 s per cycle.

The period of the oscillation is 0.25 seconds.

Now, to find the frequency of the oscillation, we need to determine the number of cycles that occur in one second. The frequency (f) is the inverse of the period:

f = 1 / T = 1 / 0.25 s = 4 cycles per second (Hz).

The frequency of the oscillation is 4 Hz.

To know more about oscillation, refer here:

https://brainly.com/question/13112321#

#SPJ11

As the fisherman walks towards the shore on the boat, the boat moves away from the shore to maintain the center of mass of the fisherman-boat system.

When the fisherman (mass m) stands at the center of the small boat (also mass m) and walks towards the shore, the following occurs:

1. As the fisherman moves towards the shore, he exerts a force on the boat in the opposite direction, due to Newton's Third Law of Motion (action and reaction forces are equal and opposite).

2. The boat will move away from the shore in response to the force exerted by the fisherman's movement. This is because the fisherman-boat system is initially stationary, and there is no net external force acting on it.

3. The center of mass of the fisherman-boat system remains constant. This means that as the fisherman moves closer to the shore, the boat must move further away from the shore to maintain the same center of mass.

4. When the fisherman stops walking, the boat will also stop moving away from the shore, but at a greater distance than initially. The fisherman and the boat would have moved relative to each other, but their combined center of mass remains at the same distance (d) from the shore.

To know more about Newton's Third Law of Motion, click here;
https://brainly.com/question/29768600

#SPJ11

The ball takes about 3.06 seconds to reach the top of its path.

When a ball is thrown or hit straight up, it will reach its maximum height at the point where its vertical velocity becomes zero.

At this point, the ball's acceleration will be equal to the acceleration due to gravity, which is -9.8 m/s².

Using the equation of motion for an object with constant acceleration, we can find the time it takes for the ball to reach the top of its path:

vf = vi + at

where vf is the final velocity (which is zero when the ball reaches its maximum height), vi is the initial velocity (30 m/s), a is the acceleration (-9.8 m/s²), and t is the time we're looking for.

Rearranging the equation, we get:

t = (vf - vi) / a

Since the final velocity is zero, we have:

t = -vi / a

Substituting the values, we get:

t = -30 m/s / (-9.8 m/s²)

t = 3.06 seconds

To know more about equation of motion refer here

https://brainly.com/question/15080570#

#SPJ11

In this scenario, we need to use the Doppler effect equation to calculate the minimum velocity required for the sound to be heard. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source.

The equation we will use is:

f' = f (v + vobs) / (v - vs)

Where f is the original frequency (35.1 kHz), v is the velocity of sound (343 m/s), vobs is the velocity of the observer (126 m/s), and vs is the velocity of the source (which is assumed to be zero in this case).

To find the new frequency, f', that would be heard by the second airplane, we need to solve for v2, the velocity of the second airplane. We also need to know the range of audible frequencies, which is typically between 20 Hz and 20 kHz.

If we plug in the given values, we get:

f' = 35.1 kHz (343 m/s + 126 m/s) / (343 m/s - v2)

Simplifying this equation gives:

f' = 1.304 + 0.00367v2

To find the minimum velocity that would put the frequency in the audible range, we can set f' equal to 20 kHz:

20 kHz = 1.304 + 0.00367v2

Solving for v2 gives:

v2 = 5,355 m/s

This means that the second airplane must fly at a minimum velocity of 5,355 m/s in order for the sound to be shifted into the audible frequency range. This is obviously impossible, so the whistle would not be heard by the second airplane.

In conclusion, the Doppler effect is a fascinating phenomenon that can help us understand how waves behave when the observer or source is in motion. By using the Doppler equation, we can calculate the shift in frequency and determine whether a sound will be audible or not. In this particular scenario, we see that the minimum velocity required for the sound to be heard is far beyond what is physically possible.

To know more about Doppler effect refer here

https://brainly.com/question/15318474#

#SPJ11

The energy of each incident photon with a frequency of 3.0 x [tex]10^{15[/tex]Hz is approximately 1.99 x[tex]10^{-18[/tex] Joules.

The energy of a photon can be calculated using the formula:

E = h * f

where:

E is the energy of the photon,

h is Planck's constant (approximately 6.626 x [tex]10^{-34[/tex] J*s), and

f is the frequency of the radiation.

Given:

f = 3.0 x[tex]10^{15[/tex] Hz (frequency of the radiation)

Let's calculate the energy of each incident photon:

E = (6.626 x [tex]10^{-34[/tex] J*s) * (3.0 x [tex]10^{15[/tex] Hz)

E ≈ 1.99 x [tex]10^{-18[/tex]J

To know more about photon refer here

https://brainly.com/question/31137095#

#SPJ11

The electric field as E = (9x10^9 Nm^2/C^2) x (-4.77x[tex]10^{-9}[/tex] C) / [tex](0.3 m)^{2}[/tex] = -84.0 N/C.

The electric field created by a point charge is given by the equation E = kq/[tex]r^{2}[/tex], where k is Coulomb's constant, q is the charge, and r is the distance from the charge to the point where the field is being measured.

In this case, the distance is given as 0.3 m to the right of the charge, so r = 0.3 m.

Using the value of k as 9x[tex]10^{9}[/tex] [tex]Nm^{2}/C^{2}[/tex] and the charge q as -4.77x[tex]10^{-9}[/tex] C, we can calculate the electric field as E = (9x10^9 Nm^2/C^2) x (-4.77x[tex]10^{-9}[/tex] C) / [tex](0.3 m)^{2}[/tex] = -84.0 N/C.

The negative sign indicates that the electric field is directed to the left.

To know more about  electric field, refer here:

https://brainly.com/question/8971780#

#SPJ11

The wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.

The wavelength of the light in a vacuum can be calculated using the formula λ = c/f, where λ is the wavelength, c is the speed of light in a vacuum (299,792,458 meters per second), and f is the frequency of the light.

Using this formula, we can find the wavelength of the violet light as follows:

λ = c/f
λ = 299,792,458 m/s / 7.5 x 10^14 Hz
λ = 3.997 x 10^-7 meters

Therefore, the wavelength of violet light in a vacuum is approximately 3.997 x 10^-7 meters, which is equivalent to 399.7 nanometers.

In summary, the frequency of violet light is a measure of how fast it oscillates, and its wavelength in a vacuum can be calculated using the speed of light and frequency of the light. Knowing the wavelength of a particular color of light is useful in many fields, including astronomy, physics, and optics.

For more about violet light .

https://brainly.com/question/11879525

#SPJ11

The only possibility remaining is barium-139, which is a stable (non-radioactive) isotope and would not have undergone any radioactive decay during the time period between measurements.  Hence, the unknown radioisotope in the sample is barium-139.

To determine which radioisotope is in the sample, we need to use the concept of radioactive decay and half-life. Radioactive decay is a process by which the nucleus of an unstable atom loses energy by emitting particles or radiation.

The rate of decay of a radioactive substance is described by its half-life, which is the time it takes for half of the substance to decay.

Let's calculate the half-life of each radioisotope listed in the table:

Potassium-42: Half-life of 12.4 hours

Nitrogen-13: Half-life of 10 minutes

Barium-139: Stable (non-radioactive)

Radon-220: Half-life of 55.6 seconds

From the given data, the sample of the unknown radioisotope had a mass of 104.8 kg at 12:02:00 p.m. and 13.1 kg at 4:11:00 p.m. on the same day, which is a time difference of 4 hours and 9 minutes.

Let's start by looking at the radioisotope with the longest half-life, which is potassium-42.

If the unknown radioisotope was potassium-42, its mass would have decreased by half during 12.4 hours, which is much longer than the 4 hours and 9 minutes between the measurements.

Therefore, we can eliminate potassium-42 as a possibility.

Next, let's consider nitrogen-13. If the unknown radioisotope was nitrogen-13, its mass would have decreased by half during 10 minutes. We can convert the time difference between measurements to minutes:

4 hours and 9 minutes = 249 minutes

Therefore, the number of half-lives during this time period would be:

249 / 10 = 24.9

This means that the mass of the sample would have decreased by a factor of [tex]2^{(24.9)[/tex], which is approximately [tex]2.7 * 10^7[/tex]. Starting from the initial mass of 104.8 kg, the final mass would be:

104.8 kg / [tex](2.7 * 10^7)[/tex] = [tex]3.9 * 10^{-6[/tex] kg

This is much smaller than the measured final mass of 13.1 kg, so we can eliminate nitrogen-13 as a possibility.

Finally, let's consider radon-220. If the unknown radioisotope was radon-220, its mass would have decreased by half during 55.6 seconds. We can convert the time difference between measurements to seconds:

4 hours and 9 minutes = 14940 seconds

Therefore, the number of half-lives during this time period would be:

14940 / 55.6 = 269

This means that the mass of the sample would have decreased by a factor of [tex]2^{269[/tex], which is approximately 6.8 x [tex]10^{80[/tex]. Starting from the initial mass of 104.8 kg, the final mass would be:

104.8 kg / ([tex]6.8 * 10^{80[/tex]) = [tex]1.54 * 10^{-79[/tex]kg

This is much smaller than the measured final mass of 13.1 kg, so we can eliminate radon-220 as a possibility.

To know more about radioisotope refer here

https://brainly.com/question/13076859#

#SPJ11

Answer: c

Explanation: