Answer: An algorithm
Explanation: An asymmetric encryption key that does have to be protected. An algorithm that takes one character and replaces it with one character.
Give a recursive algorithm that takes as input two non-negative integers x and y and returns the sum of x and y. The only arithmetic operations your algorithm can perform are Increment(x) which returns x 1 and Decrement(x) which returns x-1. Your algorithm should have no loops.
Answer:
Following are the code to this question:
Cal_sum(x,y)//defining a recursive method Cal_sum that takes two variable as a parameter
{
if(x==0)// defining If that checks x equal to 0
return y; //return y value
x- 1;//decreasing x value
y+1;//increasing y value
return Cal_sum(x,y)// calling method recursively
}
Explanation:
In the above-given code, a recursive method "Cal_sum" is declared, that accepts two-variable "x and y" in its parameter, and use if block to checks x is equal to 0 and return the value y variable, and, in the next step, it decreases the value of " x" by "1" and increment the value of y by "1", and call the method "Cal_sum" recursively.
The recursive program which calls itself in a function is used to return the value of y for a given x, y value in the program. The code written in python 3 goes thus :
def calc_sum (x,y) :
#initializes a function named calc_sum which takes in two arguments
if x ==0 :
#checks of the value of x is equal to 0
return y
#it returns y if x == 0
else :
#otherwise
x = x - 1
# decrease the value of x by 1
y = y + 1
#increase the value of y by 1
return calc_sum(x,y)
# calls the function recursively until x ==0
A sample run of the program is given below
print(calc_sum(4, 5 ))
Learn more :https://brainly.com/question/16027903
is check payable a liability ?
Answer:
Yes
Explanation:
Accounts payable (AP) is money owed by a business to its suppliers shown as a liability on a company's balance sheet.
PLEASE HURRY!!!
Look at the image below!
The first, third, and last are correct.
Functions of a microcomputer
Answer:
Many functions can have less amount of storage can have a small CPU could have smaller mother board units and also have different types of programming
What is the output password=sdf345
Answer:what do you mean
Explanation:
Answer:
False
Explanation:
If you put it in python your answer would be false
Which are valid variable names? Select 2 options.
cost$
firstNumber
$cost
1stNumber
first_number
Answer:
firstNumber
first_number
Explanation: i did it ;)
Answer: firstNumber
Explanation: got it right on edgen
Write a function, maxRadius, to find the index of the planet with the largest radius in the array. The function should: Be named maxR
Answer:
The following c code has the maxR function as the calculator of planet radius.
Code:
#include<iostream>
#include<string>
using namespace std;
//if is not asked to import a math library, it can be used the following Pi value.
const double PI = 3.14;
class Planet
{
private:
string planet;
double r;
public:
Planet ()
{
this->planet = "";
this->r = 0.0;
}
Planet (string name, double r)
{
this->planet = name;
this->r = r;
}
string collectName () const
{
return this->planet;
}
double collectR () const
{
return this->r;
}
double collectVolume () const
{
return 4 * r * r * r * PI / 3;
}
};
int
maxR (Planet * planets, int s)
{
double maxR = 0;
int index_of_max_r = -1;
for (int index = 0; index < s; index++)
{
if (planets[index].collectR () > maxR)
{
maxR = planets[index].collectR ();
index_of_max_r = index;
}
}
return index_of_max_r;
}
int
main ()
{
Planet planets[5];
planets[0] = Planet ("On A Cob Planet", 1234);
planets[1] = Planet ("Bird World", 4321);
int idx = maxR (planets, 2);
cout << planets[idx].collectName () << endl;
cout << planets[idx].collectR () << endl;
cout << planets[idx].collectVolume () << endl;
}
11000011 00010011 00111010 00011101 / 00010010
In this example of IP address, determine: class, hostID, netID.
Answer:
Just imagine asalt rifle XD it be firing salts.....need some salt? Ask the asalt rifle.
Explanation:
T/F 2.In most computers, the operating system is stored on a compact disc.
Answer:
False
Explanation:
Either a Hard Drive or a SSD would be used to store the OS
A mutex lock is released immediately after entering a critical section. Group of answer choices True False
Answer:
False
Explanation:
The mutex lock should be purchased at the time when it would be entered in the critical section and it is released when it leaves the critical section
Also for improving out the critical resources synchronization among various processes, the mutex locks would be implemented
Therefore the given statement is false
Hence, the same is to be considered
Answer:
False
Explanation:
[tex] \: [/tex]
[tex] \: [/tex]
Which is an algorithmic form of a procedure?
A.
function calc_area
B.
area=length*breadth
C.
call function calc_area
D.
return area to the main function
E.
end function calc_area
Answer:
b
Explanation:
im doing the test right now
Answer:
B is correct!
Explanation:
Computer programmers are responsible for writing code that tells computers commands to follow.
True
False
Answer:
True
Explanation:
the answer is true
Infrastructure as a Service (IaaS) replaces the _________ of the computer hierarchy with an Internet-based infrastructure.A. digital logic level through user levelsB. digital logic level through high-level language levelsC. system software level through high-level language levelsD. digital logic level through machine levels
Answer:
D. digital logic level through machine levels
Explanation:
In Computer science, the modern computer systems are basically organized in levels and this is known as computer hierarchy. The three levels in a chronological order are operating system level, machine language level and digital (hardware) logic level.
A digital logic level is the most fundamental level of a computer and can be defined as a level of the computer hierarchy which typically comprises of wires and gates. In digital circuits, the two (2) main logic level of the binary logic state are logical low and logical high which is typically denoted by the number 0 and 1 respectively.
In Computer science, the Infrastructure as a Service (IaaS) replaces the digital logic level through machine levels of the computer hierarchy with an Internet-based infrastructure. This is what enables various users to access resources that are available over the internet through the use of cloud storage.
Suppose you discover that you have a directory called bin2, which includes a bunch of useful programs. You want to move those programs into your bin directory, and then delete bin2. What command(s) will you give
Answer:
The MV command to move the bin2 directory to the bin directory.
Explanation:
Linux operating system uses a hierarchical arrangement of directories to organise information in its system.
It is an open source operating system with various built-in commands and other commands which can be made by a programmer.
The MV command takes a file or directory from a current directory and a destination directory.
Which of the following are labels used to identify illustrations such as tables, charts and figures in a document?
O Headers
O Footers
O Captions
O Citations
There are data which are given charts, tables and illustrated by the help of some labelling. This labelling helps us to identify the data and makes us understand what the data says.
This labelled data has to be given some name and thus in order to represent the figures in a document. This term caption is given to those data sets in the form of tables and illustrations.Hence the option C is correct,
Learn more about the labels used to identify the tables, charts and figures in a document.
brainly.in/question/11644668.
The formula to convert Fahrenheit (F) temperature to Celsius (C) is C=F-32/1.8 which line of code will accomplish this conversion?
O Celsius = (Fahrenheit - 32) / 1.8
O Celsius = (Fahrenheit - 32) * 1.8
O Celsius = Fahrenheit - 32 * 1.8
O Celsius = Fahrenheit - 32 /* 1.8
The formula code that coverts the temperature unit of Fahrenheit to Celsius is Celsius = (Fahrenheit - 32) / 18. Therefore, option A is correct.
What are the units of measuring temperature?Temperature is given as the unit of measuring the hotness or coolness of a body. The SI unit of measuring temperature is Kelvin. The equivalent converts the temperature unit between Kelvin, Celsius, and Fahrenheit.
The code of line that helps in accomplishing the conversion of Fahrenheit to Celsius is,
Celsius = (Fahrenheit - 32) / 18.
Thus, option A is correct.
Learn more about Celsius to Fahrenheit, here:
https://brainly.com/question/14272282
#SPJ2
PEASE ANSWER QUICKLY
What is the value of the variable moneyDue after these lines of code are executed? >>>numSodas = 2 >>>costSodas = 1.50 >>>moneyDue = numSodas * costSodas
The value of moneyDue is ____.
Answer:
3.0
Explanation:
I input 90 and it was not correct, the answer is 3.0 (correct on Edg 2021) :D
Write a program to simulate a simple calculator. In your program ask the user to enter an operation selected from the menu, ask for two operands. Calculate the result and display it on the screen. Here is a sample run
Answer:
Written in Python:
opcode = input("Enter operator: +,-,*,/")
operand1 = float(input("Operand 1: "))
operand2 = float(input("Operand 2: "))
if opcode == "+":
print(operand1 + operand2)
elif opcode == "-":
print(operand1 - operand2)
elif opcode == "*":
print(operand1 * operand2)
elif opcode == "/":
print(operand1 / operand2)
else:
print("Invalid Operator")
Explanation:
This prompts user for operator
opcode = input("Enter operator: +,-,*,/")
The next two lines prompt user for two operands
operand1 = float(input("Operand 1: "))
operand2 = float(input("Operand 2: "))
This performs + operation if operator is +
if opcode == "+":
print(operand1 + operand2)
This performs - operation if operator is -
elif opcode == "-":
print(operand1 - operand2)
This performs * operation if operator is *
elif opcode == "*":
print(operand1 * operand2)
This performs / operation if operator is /
elif opcode == "/":
print(operand1 / operand2)
This displays invailid operator if input operator is not +,-,* or /
else:
print("Invalid Operator")
. Because Maya knows that the most important part of an e-mail message is the subject line, she ________.
Answer:
adjust the subject line if the topic changes after repeated replies
Explanation:
E-mail (electronic mail) message is usually reffered to as a text, usually informal which can be sent electronically or received through a computer network. e-mail message is usually brief but at same time some do contains attachment which allows sending of images as well as spreadsheet. One of the important part of Email message is the Subject Line which serves as the introduction that gives the intent of the message, it is this Subject Line that will show when the recipient is going through the list of emails in his/her inbox. It allows the recipient to know what is conveyed in the body of the message.There are usually action information as well as dates at the end of the email message as well as closing thought.In the case of Maya from the question, Because Maya knows that the most important part of an e-mail message is the subject line, she adjust the subject line if the topic changes after repeated replies, since the subject line convey the information in the body text, so the subject line need to be adjusted to fit the topic as it changes.
Match the correct term from the list below with the correct statement.
Answer:
self-serving bias
feedback
self-fulfilling prophecy
communication
context
Write a class named TestScores. The class constructor should accept an array of test scores as its argument. The class should have a method that returns the average of the test scores. If any test score in the array is negative or greater than 100, the class should throw an IllegalArgumentException. Demonstrate the class in a program.
import java.util.Arrays;
public class TestScores {
public static float getAverage(float arr[]){
float total = 0;
for (float x : arr){
if (x < 0 || x > 100){
throw new IllegalArgumentException();
}
else{
total += x;
}
}
return (total / arr.length);
}
public static void main(String [] args){
float arr[] = {1,100,0,43,-1};
System.out.println(getAverage(arr));
}
}
In the main method we test our getAverage method with the arr array. You can replace the values in the arr array and test your own values. I hope this helps!
The code example of the implementation of the TestScores class in Java is shown below:
What is the class?java
import java.util.Arrays;
public class TestScores {
private int[] scores;
public TestScores(int[] scores) {
this.scores = scores;
}
public double getAverage() {
int sum = 0;
for (int score : scores) {
if (score < 0 || score > 100) {
throw new IllegalArgumentException("Invalid test score: " + score);
}
sum += score;
}
return (double) sum / scores.length;
}
public static void main(String[] args) {
int[] scores = {85, 90, 92, 88, 95};
TestScores testScores = new TestScores(scores);
try {
double average = testScores.getAverage();
System.out.println("Average test score: " + average);
} catch (IllegalArgumentException e) {
System.out.println("Error: " + e.getMessage());
}
}
}
Read more about class here:
https://brainly.com/question/26580965
#SPJ2
True/False Using a RADIUS server with RRAS means that the local server database will be used to authenticate users for accessing the local network
Answer: True.
Explanation:
A RADIUS Client ( Radius Authentication Dial or Network Access Server) are networking device which works like a (VPN concentrator, router, or a switch) they are used to authenticate users. A RADIUS Server runs as a background process that is used on a UNIX, and Windows server. It mains purpose is to maintain user profiles on a central database.
Which finger types the space bar?
Answer:
Thumbs
Explanation:
The _________ contains logic for performing a communication function between the peripheral and the bus.
Answer:
I/O module
Explanation:
The I/o module is known as the input/output module. Such a module is usually connected to system on one end and and in the other end, one or more input/output devices are connected. Such a technique helps to exchange data between the processor and also the input /output device. It helps in information transfer between the internal storage and also the external storage.
Write a Java program that does the following: Prompts the user to input five decimal numbers Prints the five decimal numbers Converts each decimal number to the nearest integer Adds the five integers Prints the sum and average of the five integers
import java.util.Scanner;
public class Main {
public static void main(String[] args) {
Scanner myObj = new Scanner(System.in);
float arr[] = {0,1,2,3,4};
String txt[] = {"first", "second", "third", "fourth", "fifth"};
for (int i=0;i<arr.length; i++){
System.out.println("Enter the " + txt[i] + " number.");
float num1 = myObj.nextFloat();
arr[i] = num1;
}
for (int w = 0; w< arr.length; w++){
System.out.println("The " + txt[w] + " number is " + arr[w]);
arr[w] = Math.round(arr[w]);
}
System.out.println(" ");
for (int w = 0; w < arr.length; w++){
System.out.println("The " + txt[w] + " number is " + arr[w]);
}
System.out.println(" ");
float total = 0;
for (float w : arr){
total += w;
}
System.out.println("The sum of the numbers is " + total + " and the average is " + (total / 5));
}
}
I hope this helps!
Which method accepts a function that combines all the elements in the array and then returns the resulting value?
a. filter()
b. reduce()
c. map()
d. forEach()
Answer:
The method that accepts a function that combines all the elements in an array and then returns the resulting values is map() method.
Explanation:
map() method creates a new array with the results of calling a provided function for every array element. map() element calls function for each array element to compute value.
Suppose a disk drive has the following characteristics: Six surfaces 16,383 tracks per surface 63 sectors per track 512 bytes/sector Track-to-track seek time of 8.5ms Rotational speed of 7,200rpm a) What is the capacity of the drive
Answer:
The answer is "2.95 GB"
Explanation:
Given value:
Surfaces = 6
The tracks per surface =16,383
The sectors per track = 63
bytes/sector = 512
Track-to-track seek time = 8.5ms
The Rotational speed = 7,200rpm
[tex]\text{Drive capacity= surface} \times \text{tracks per surface} \times \text{sectors per track} \times \frac{bytes}{sector}[/tex]
[tex]= 6 \times 16383 \times 63 \times 512 \\\\= 3170700288 \ B\\\\ = 3023.81543 \ MB \\\\= 2.95294 \ GB\\[/tex]
The drive capacity is 2.95 GB
Which data type is -7?
O string
O int
O float
O single
Answer:
It's an int... Choose B
Answer:
int
Explanation:
correct on edge
6.24 LAB: Exact change - functions Write a program with total change amount as an integer input that outputs the change using the fewest coins, one coin type per line. The coin types are dollars, quarters, dimes, nickels, and pennies. Use singular and plural coin names as appropriate, like 1 penny vs. 2 pennies. Ex: If the input is:
Answer:
Written in Python
money = int(input("Enter Amount Here: "))
dollar = int(money/100)
money = money % 100
quarter = int(money/25)
money = money % 25
dime = int(money/10)
money = money % 10
nickel = int(money/5)
penny = money % 5
if dollar >= 1:
if dollar == 1:
print(str(dollar)+" dollar")
else:
print(str(dollar)+" dollars")
if quarter >= 1:
if quarter == 1:
print(str(quarter)+" quarter")
else:
print(str(quarter)+" quarters")
if dime >= 1:
if dime == 1:
print(str(dime)+" dime")
else:
print(str(dime)+" dimes")
if nickel >= 1:
if nickel == 1:
print(str(nickel)+" nickel")
else:
print(str(nickel)+" nickels")
if penny >= 1:
if penny == 1:
print(str(penny)+" penny")
else:
print(str(penny)+" pennies")
Explanation:
I've added the source code as an attachment where I used comments to explain some lines
Write a method called printIndexed that accepts a String as itsparameter and prints the String's characters in order followed bytheir indexes in reverse order. For example, the call ofprintIndexed("ZELDA"); should print Z4E3L2D1A0 to the console.
Answer:
def printIndexed(s):
for i in range(len(s)):
print(s[i] + str(len(s) - 1 - i), end="")
printIndexed("ZELDA")
Explanation:
*The code is in Python.
Create a method named printIndexed that takes one parameter, s
Create a for loop that iterates the length of the s times
Inside the loop, print the characters from starting and indexes from the end
Note that in order the print the current character, you need to use indexing. s[i] refers to the current character of the string (the value of the i starts from 0 and goes until length of the s - 1). Also, to print the indexes from the end, you need to subtract the i from the length of the s - 1
For example, in the first iteration, i = 0:
s[i] = s[0] = Z
len(s) - 1 - i = 5 - 1 - 0 = 4