Answer:
It can be either a moon or a satellite
Explanation:
a moon is a piece of space debris that orbits a planetdue to the planets gravitational force. Inherently, satellite mimics a moon but it is used for collecting data and etc
An object of mass 5 kilograms is moving across a surface in a straight line with a speed of 3.5 meters/second. what amount of force would be
required to keep the object in motion if you ignore the surface friction?
a 0 newtons
b 175 newtons
c 35 newtons
d 5 newtons
Taking into account the Newton's second law, the amount of force required to keep the object in motion if you ignore the surface friction is 0 N.
Newton's second lawIn first place, acceleration in a body occurs when a force acts on a body. There are two factors that influence the acceleration of an object: the net force acting on it and the mass of the body.
Newton's second law states that this force will change the speed of an object because the speed and / or direction will change. These changes in velocity are called acceleration.
So, Newton's second law defines the relationship between force and acceleration mathematically. This law says that the acceleration of an object is directly proportional to the sum of all the forces acting on it and inversely proportional to the mass of the object.
Mathematically, Newton's second law is expressed as:
F= m×a
where:
F = Force [N]m = Mass [kg]a = Acceleration [m/s²]Force required to keep the object in motionIn this case, you know:
F= ?m= 5 kga= 0 [tex]\frac{m}{s^{2} }[/tex]. Acceleration is a magnitude that measures the change in velocity in a given period. That is to say that if the object changes speed, that change is measured with acceleration. So if an object is moving at a constant speed, there is no change in speed and its acceleration is zero.Replacing in Newton's second law:
F= 5 kg× 0 m/s²
Solving:
F= 0 N
Finally, the amount of force required to keep the object in motion if you ignore the surface friction is 0 N.
Learn more about the Newton's second law:
brainly.com/question/23845187
brainly.com/question/13959891
#SPJ1
A race car rounds a curve at 54 m/s. The radius of the curve is 441 m, and the car’s mass is 610 kg. (Assume that the car’s speed remains constant. Take the radially inward direction to be positive) The car’s acceleration is 6.61 m/s2. What is it in g’s? What is the centripetal force acting on the car?
The car’s acceleration in g’s is equal to 0.67 m/s² and the centripetal force acting on is equal to 4033.47 Newton.
How to calculate the car’s acceleration in g’s?Since the car’s acceleration is given as 6.61 m/s², we would simply divide it by the acceleration due to gravity (9.8 m/s²) to calculate the car’s acceleration in g’s as follows:
Acceleration, g = 6.61/9.8
Acceleration, g = 0.67 m/s².
What is the centripetal force acting on the car?Mathematically, the centripetal force acting on this car can be calculated by using this formula:
Fc = mv²/r
Fc = (610 × 54²)/441
Fc = 1778760/441
Fc = 4033.47 Newton.
Read more on centripetal force here: https://brainly.com/question/20905151
#SPJ1
At first the contact force from mud on each wheel is 2000n explain why the wheels will start to sink
The wheels will start to sink due to no friction by the mud to take the grip.
What is frictional force?When an object is moving on a rough surface, it experiences opposition. This opposing force is called the friction force.
Given is the contact force from mud on each wheel is 2000N . Assume the only other force acting on the block is that due to gravity.
The friction force is given by
f = coefficient of friction x Normal or contact force
The mud is soft and viscous. When the wheels are rotating, the car will be sinking in mud. This happens due to no grip. Car tries to get out of the mud, but instead it digs itself.
Car needs grip or frictional force to get out from the mud. There is no friction with the ground. Exactly friction makes car's wheels to displace.
Thus, the wheels of the car sink because of no friction from mud.
Learn more about friction force.
https://brainly.com/question/1714663
#SPJ1
give two examples of contact force and non contact force
Answer:
Explanation:
The two examples of contact forces are frictional force and applied force. The two examples of noncontact forces are gravitational force and magnetic force.
9. A body is a particular amount of matter. It can be a solid, liquid or gas. It can be
described as existing in
O A. size and shape.
O B. time and space.
C. motion and force.
O D. location and movement.
ou fill be highlighted on the review page)
Answer:
B. Time and Space
Explanation:
Matter is a pshyical or corporeal susbtance in general, whether solid, liquid, or gaseous especially as distinguised from incorpeal substance, as spirit or mind, or form qualities, actions, and the
Within this time-and-space boundary, all matter exists. All matter is made up of atoms. Because these atoms take up space in the universe, solids, liquids, and gases are recognized as existing and may be found in all three dimensions.
Time is a figurative term. Space has three dimensions but time only has one.
Answer:
time and space (A)
Explanation:
When something physically exists, it must exist in time and space. Matter/atoms are recognized as existing--which must be described by existence in time and space.
> Time and space exist as the same property (time cannot exist without space), and is called space-time
> Time is seen as relative {theory of special relativity} meaning that it changes based on your perspective and the space it exists in.
hope this helps!!
Against the park ranger's advice, a visitor at a national park throws a stone horizontally off the edge of a 83 m high cliff and it lands a distance of 93 m from the edge of the cliff, narrowly missing a visitor below.
What was the initial horizontal velocity of the rock, in m/s? You can round your answer to the hundredths place and use g ≈ 10 m/s2.
Which statement correctly describes mass-energy equivalence? All energy in the universe will be converted to an equivalent amount of mass. Mass can decrease in nuclear changes without the production of energy. All energy in the universe is a result of mass being converted into energy. A large amount of mass is equivalent to a small amount of energy.
The statement 'all energy in the universe is a result of mass being converted into energy' correctly describes mass-energy equivalence.
What is mass-energy equivalence?The expression mass-energy equivalence refers to the proportion of matter that can be converted into energy in the universe.
This mass-energy equivalence is an outcome of process of converting mass into energy.
In conclusion, the statement 'all energy in the universe is a result of mass being converted into energy' correctly describes mass-energy equivalence.
Learn more about mass-energy equivalence here:
https://brainly.com/question/3171044
#SPJ1
Answer:
C
Explanation:
7.Name three values you could measure as scalars and three values you could measure as
vectors.
scalars: distance, speed, time
vectors: displacement, velocity, acceleration
When your hand presses
down on scissors, what is your
force called?
a. input force
b. output force
c. buoyant force
Answer:
INPUT force
Explanation:
You are putting force into a machine of levers to have the output of cutting something.
When your hand presses down on scissors, the force is called input force because are applying a force into an object. Thus, option a is correct.
What is force ?Force is an external agent acting on a body to deform it or to change its state from rest or motion. There are various kinds of force such as magnetic force, nuclear force, gravitational force etc.
Force is a vector quantity thus, it is characterised by a magnitude and direction. According to second law of motion, the force acting on a body is the product of mass and acceleration.
Hence, the force acting on a body is directly proportional to the mass. Greater the mass, greater will be the force needed to accelerate the body. When we press down on an object we are applying an input force to the object.
To find more on force, refer here:
https://brainly.com/question/28875770
#SPJ2
The kinetic energy of an object is proportional to the square of its _______?
Answer:
kinetic energy of an object is proportional to the square root of its boiling vocelity
how to find the sum of a convergent series
The formula that can be used to obtain a convergent series is given by;
a/1 – r.
What is a series?In mathematics, we define a series as sum of numbers which could be convergent or divergent. In a convergent series, the summation of the numbers approaches a given value.
The formula that can be used to obtain a convergent series is given by;
a/1 – r.
Learn more about a convergent series:https://brainly.com/question/15415793?
#SPJ11
Which of these is
considered "work"
according to
science?
A. pushing against a wall
B. babysitting
C. kicking a soccer ball
Answer:c
Explanation:work is force x distance. The wall doesn’t move any distance in A so that’s not work. B involves tasks that do work but I don’t think this is what they’re going for. For a short instance while kicking a ball, your foot is applying a force to the ball which moves a distance before following its own trajectory after contact with your foot. Because the contact has a short duration and isn’t instantaneous, this is work
A simulation shows whether changing various weather conditions increases
the likelihood that a hurricane will form. which type of model is this?
a. it is physical.
b. it is computer-generated.
c. it is mathematical.
d. it is conceptual.
Answer:I don’t know
Explanation:
i don’t know
Find the mass of a sample of water if its temperature dropped 24.8 °C when it lost 870 J of
heat. (Remember that specific heat capacity of water 4200 J/kg °C)
Answer:
8.35 × [tex]10^{-3}[/tex] kg
Explanation:
Remember the formula for heat:
[tex]Q=mc\Delta T[/tex]
You just need to solve for m, doing so you're left with:
[tex]m=\dfrac{Q}{c\Delta T}[/tex]
Replace the variables with numbers and that's it.
The length of a piece of tissue is 42 meters. How big is 3/7 of this piece?
hi brainly user! ૮₍ ˃ ⤙ ˂ ₎ა
⊱┈────────────────────────┈⊰
[tex]\large \bold {ANSWER}[/tex]
[tex]\large \boxed { \large \sf \green{18}}[/tex]3/7 of the fabric equals 18.
[tex]\large \bold {SOLUTION}[/tex]
To find the solution to your task, we will have to find 3/7 of 42, that is. How much is 3/7 of 42?
So, to find the value we must do the following way, multiply the value of the length of the fabric 42, by the numerator of the fraction 3 and divide by the denominator 7, See:
[tex]\begin{gathered}\Large\begin{array}{c}\tt\dfrac{3}{7}\:in\: 42\\\\ \tt 42\cdot 3=126\\\\ \tt 126\div 7=\boxed{\boxed{\tt 18}}\end{array}\end{gathered}[/tex]
Hence, 3/7 of the fabric equals 18.
A kettle consumes 198 kJ to boil water. If 168 kJ was used to boil the
water, what is the efficiency of the kettle?
The efficiency of the kettle is 117.9%
What is efficiency?Efficiency is used to measuring how much work or energy we can conserve in a process. In other words, it is like comparing the output of the energy to the input of the energy in any given system.
It is also define as the ratio of Energy Input to the Energy Output. To express it in percent multiply it by 100.
Here, Efficiency = Energy output / Energy input
[tex]η =\frac{W_{out} }{W_{in} } * 100[/tex]
[tex]η = \frac{198kJ}{168kJ} * 100[/tex]
= 117.9%
So , the efficiency is 117.9%
For more Efficiency related question visit:
https://brainly.com/question/13110830
#SPJ1
5. In the image below, the focus lines are shown. What can be done to bring the apple into focus?
A. Make the lens rounder.
B. Make the lens flatter.
C. Move the apple farther from the eye.
D. Nothing should be done because the apple is already in focus.
In the image below, the focus lines are shown. The step can be done to bring the apple into focus is make the lens rounder. The correct option is A.
What is lens?
The lens is in spherical shape may be diverging or converging.
As light enters the eye, it is focused on the retina. Changing the pupil diameter, regulates the amount of light entering the eye. Changing lens shape will focus the light.
The changes in lens shape needed to maintain focus as the object distance changes.
Thus, the correct option is A.
Learn more about lens.
https://brainly.com/question/17014859
#SPJ1
how can you tell the difference between an expression of speed and an expression of velocity?
A. velocity has unit expressed as distance/time; speed does not.
B. speed has units expressed as distance/time; velocity does not.
C. speed includes a direction; velocity does not.
D. velocity includes a direction; speed does not.
A ball is dropped from rest from the top of a high building. Ignore air resistance and take g = 9,8 m/s² calculate speed of the ball after 1sec.
The speed of the ball after one second is obtained as 9.8 m/s.
What is the speed after 1 second?We know that since the ball dropped from a height, its initial velocity is zero.
Thus we have;
u = 0 m/s
v = ???
g = 9,8 m/s²
t = 1sec
Given that;
v = u + at
v = at
v = 9,8 m/s² * 1sec
v = 9.8 m/s
Learn more about acceleration:https://brainly.com/question/12550364?
#SPJ1
A student drops a water balloon out of a dorm window 17 m above the ground. What is its speed when it hits the ground?
A periodic wave travels from one medium to another. which pair of variables are likely to change in the process?
velocity and wavelength are likely to change in the process
When a wave travels from one medium to another it undergoes a change in direction and this is referred to as refraction.Refraction is the bending of a wave or a change in direction of a wave as it travels from one medium to another. Refraction is accompanied by change in velocity and wavelength of a wavehttps://brainly.com/question/12571787
#SPJ4
When the humerus moves in the glenoid fossa, the moving joint surfaces are:
When the humerus moves in the glenoid fossa, the moving joint surfaces are convex on concave.
What is Glenoid fossa?This is a bone depression in which the head of the humerus fits into to aid movement and support.
The moving joint surfaces are convex on concave in structure when humerus moves in the glenoid fossa.
Read more about Humerus here https://brainly.com/question/7194643
#SPJ12
two conducting spheres
Answer:
[tex]\fbox {F: +3C, G: +3C}[/tex]
Explanation:
When two conducting spheres come in contact, their charges will become the mean of their charges. This takes place by the transfer of charges from the greater charged sphere to the lesser charged one.
Then :
⇒ F + G / 2
⇒ -14 + 20 / 2
⇒ 6/2
⇒ 3C
∴ Hence, both sphere F and sphere G will have a charge of +3 C.
John walked from his home to work, it took him 12 min and the distance covered was 3 km. calculate the average speed in m/s
Answer:
4.167
Explanation:
ittravels 4.167metres per second
The potential difference across the ends of a wire is doubled in magnitude. If ohm’s law is obeyed, which one of the following statements concerning the resistance of the wire is true?.
The potential difference across the ends of a wire is doubled in magnitude. If ohm’s law is obeyed, the resistance is not changed. Thus, option A is correct.
What is current?The current is the stream of charges which flow inside the conductors when connected across the end of voltage.
From Ohm's law, V =IR
Here, R is the proportionality constant called the resistance of the resistor.
The complete question is given in the image attached.
The potential difference across the ends of a wire is doubled in magnitude.2V = IRR =2 V/IAs, the resistance is a constant value, it does not change.
The following statements concerning the resistance of the wire true is :
The resistance is not changed
Thus, the correct option is A.
Learn more about current, here:
https://brainly.com/question/13076734
#SPJ1
What does puddicombe describe as the result of not taking any time out to simply look after our brains?
According to Puddicombe, the result of not taking any time out to simply look after our brains is that:
We get stressed. It also makes us to miss out on the most important things in life.What was Puddicombe's submission?In his popular talk, Puddicombe explained that we have been caught up with the internet and other activities so much so that we do not have time to look out for our brains.
For this reason, we stress our brains and become distant from the most important things in life.
Learn more about our brains and stress here:
https://brainly.com/question/154477
#SPJ1
a sample contains 100 g of radioactive isotope. How much radioactive isotope will remain in the sample after 1 half-life?
Answer:
[tex]\huge\boxed{50g}[/tex]
Definition:
Half-life- The time taken for half of the radioactive isotopes to decay.
Explanation:
How does radioactive decay work? Radioactive decay is a process by which unstable nuclei become more stable through the emission of alpha or beta particles or gamma rays.
Since a half-life is the time taken for half of the isotopes to decay, we can simply divide the initial mass of 100 grams by 2; this gives us 50 grams.
1) Divide 100g by 2.
[tex]\frac{100g}{2}=50g[/tex]
PLEASE HELP
Identify and describe at least (3) physical science concepts to help with blackout.
Physics science in blackout involves the transmission of electrical impulses, neurotransmitter signaling and loss of coordination (body movements).
What is blackout?The expression 'blackout' refers to the loss of memory remembers of one person due to the effects of alcohol.
During this process, a person may lose his/her ability to move due to failure in the transmission of electrical impulses and neurotransmitter signaling.
In conclusion, physics science in blackout involves the transmission of electrical impulses, neurotransmitter signaling and loss of coordination (body movements).
Learn more about blackout here:
https://brainly.com/question/10462033
#SPJ1
Would young rocks be found near a volcano?
Answer:
Yes, young rocks typically occur around volcanoes since they are closer to the crate, thus the magma is beginning to cool down to form rocks or it has recently cooled down.
Explanation:
yes
new forms of extrusive igneous rocks will be created as lava cooling and hardening will create new and young rocks
A ball with a mass of 2000 g is floating on the surface of a pool of water. What is the minimum volume that the ball could have without sinking below the surface of the water? (Note that water has a density of 1.00 g/cm³.)
Answer:
[tex]2000\; {\rm cm^{3}}[/tex].
Explanation:
When the ball is placed in this pool of water, part of the ball would be beneath the surface of the pool. The volume of the water that this ball displaced is equal to the volume of the ball that is beneath the water surface.
The buoyancy force on this ball would be equal in magnitude to the weight of water that this ball has displaced.
Let [tex]m(\text{ball})[/tex] denote the mass of this ball. Let [tex]m(\text{water})[/tex] denote the mass of water that this ball has displaced.
Let [tex]g[/tex] denote the gravitational field strength. The weight of this ball would be [tex]m(\text{ball}) \, g[/tex]. Likewise, the weight of water displaced would be [tex]m(\text{water})\, g[/tex].
For this ball to stay afloat, the buoyancy force on this ball should be greater than or equal to the weight of this ball. In other words:
[tex]\text{buoyancy} \ge m(\text{ball})\, g[/tex].
At the same time, buoyancy is equal in magnitude the the weight of water displaced. Thus:
[tex]\text{buoyancy} = m(\text{water}) \, g[/tex].
Therefore:
[tex]m(\text{water})\, g = \text{buoyancy} \ge m(\text{ball})\, g[/tex].
[tex]m(\text{water}) \ge m(\text{ball})[/tex].
In other words, the mass of water that this ball displaced should be greater than or equal to the mass of of the ball. Let [tex]\rho(\text{water})[/tex] denote the density of water. The volume of water that this ball should displace would be:
[tex]\begin{aligned}V(\text{water}) &= \frac{m(\text{water})}{\rho(\text{water})} \\ &\ge \frac{m(\text{ball}))}{\rho(\text{water})} \end{aligned}[/tex].
Given that [tex]m(\text{ball}) = 2000\; {\rm g}[/tex] while [tex]\rho = 1.00\; {\rm g\cdot cm^{-3}}[/tex]:
[tex]\begin{aligned}V(\text{water}) &\ge \frac{m(\text{ball}))}{\rho(\text{water})} \\ &= \frac{2000\; {\rm g}}{1.00\; {\rm g\cdot cm^{-3}}} \\ &= 2000\; {\rm cm^{3}}\end{aligned}[/tex].
In other words, for this ball to stay afloat, at least [tex]2000\; {\rm cm^{3}}[/tex] of the volume of this ball should be under water. Therefore, the volume of this ball should be at least [tex]2000\; {\rm cm^{3}}\![/tex].