What is the value of the h in the triangle below?

Answer:

------------------------------

The two smaller right triangles are similar by AA property.

Use ratios of corresponding sides to get:

Simplify and solve for y:

The lateral surface area of a cylinder is the area of the sides of the cylinder, not including the top or bottom. In the case of a can of beans, the label that wraps around the can represents this lateral surface area.

To find the lateral surface area of the can, we need to use the formula for the lateral surface area of a cylinder: LSA = 2πr*h, where r is the radius of the base of the cylinder and h is the height of the cylinder.

Since we are given the diameter of the can (7 cm), we need to divide it by 2 to get the radius: r = 7/2 = 3.5 cm. The height of the can is given as 11 cm.

Now we can plug these values into the formula to find the lateral surface area of the can: LSA = 2π(3.5)(11) ≈ 242.95 cm².

So the lateral surface area of the can of beans is approximately 242.95 cm². This is the area of the sides of the can that the label would wrap around.

To know more about label refer here

https://brainly.com/question/27898219#

#SPJ11

68.2% confidence of the students drink between: 131 and 175 bottles of water per day.

We can use the empirical rule, also known as the 68-95-99.7 rule, to determine the range of values that contain 68.2% of the data in a normal distribution. According to the rule, approximately 68.2% of the data falls within one standard deviation of the mean.

We know that the mean amount of bottled water consumed is 153 bottles, with a standard deviation of 22 bottles. Therefore, one standard deviation below the mean is 153 - 22 = 131 bottles, and one standard deviation above the mean is 153 + 22 = 175 bottles.

Thus, we can say with 68.2% confidence that the number of bottled water consumed by students each day falls between 131 and 175 bottles.

To know more about confidence, refer here:

https://brainly.com/question/29048041#

#SPJ11

The answer is that the town's percentage growth rate is approximately 3% per year.

To find the town's percentage growth rate, we can use the formula:

growth rate = (final population - initial population) / initial population * 100%

Let P be the initial population of the town, and let t be the time it takes for the population to double, which is 23 years in this case. We know that:

final population = 2P (since the population doubles)

t = 23 years

Substituting these values into the formula, we get:

growth rate = (2P - P) / P * 100% / 23

= P / P * 100% / 23

= 100% / 23

≈ 4.35%

However, this is the annual growth rate that would result in a doubling of the population in exactly 23 years. Since the question asks for the approximate percentage growth rate per year.

We need to find the equivalent annual growth rate that would result in a doubling time of approximately 23 years.

One way to do this is to use the rule of 70, which states that the doubling time (t) of a quantity growing at a constant percentage rate (r) is approximately equal to 70 divided by the growth rate:

t ≈ 70 / r

In this case, we want t to be approximately 23 years, so we can solve for r:

23 ≈ 70 / r

r ≈ 70 / 23

r ≈ 3.04%

Therefore, the town's percentage growth rate is approximately 3% per year.

Learn more about growth rate

brainly.com/question/14263843

#SPJ11

Answer:

Step-by-step explanation:

cle Graphs MC)The circle graph describes the distribution of preferred transportation methods from a sample of 400 randomly selected San Francisco residents.circle graph titled San Francisco Residents' 9, 70 to 79, 80 to 89, 90 to 99, 100 to 109, 110 to 119. The y-axis is labeled Frequency and begins at 0 with tick marks every one unit up to 14. A shaded bar stops at 10 above 60 to 69, at 9 above 70 to 79, at 5 above 80 to 89, at 4 above 90 to 99, and at 2 above 100 to 109. There is no shaded bar above 110 to 119. The graph is titled Temps in Sunny Town.A graph with the x-axis labeled Temperature in Degrees, with intervals 60 to 69, 70 to 79, 80 to 89, 90 to 99, 100 to 109, 110 to 119. The y-axis is labeled Frequency and begins at 0 with tick marks every one unit up to 16. A shaded bar stops at 2 above 60 to 69, at 4 above 70 to 79, at 12 above 80

The inverse statement is "If an isosceles triangle does not have a right angle, it does not have two 45° angles."

The given statement is:

"If an isosceles triangle has a right angle, it has two 45° angles."

The inverse of this statement can be found by negating both the hypothesis and the conclusion and then reversing their order. The negation of the hypothesis is "An isosceles triangle does not have a right angle," and the negation of the conclusion is "It does not have two 45° angles."

Thus, the inverse statement is:

"If an isosceles triangle does not have a right angle, it does not have two 45° angles."

This statement asserts that if an isosceles triangle does not have a right angle, then it cannot have two 45° angles. In other words, if an isosceles triangle has only one 45° angle, it cannot have a right angle.

The inverse statement is logically equivalent to the original statement, and they are both true because they are both examples of the contrapositive of the conditional statement "If an isosceles triangle has two 45° angles, then it has a right angle."

To learn more about triangle click on,

https://brainly.com/question/30481399

#SPJ1

Answer:

False.

Inflation occurs in an economy when there is an increase in the overall price level of goods and services over time. It is usually caused by factors such as an increase in the money supply, higher demand for goods and services, or a decrease in the supply of goods and services. Therefore, a reduction in the total amount of money in an economy would generally lead to deflation, which is the opposite of inflation.

Answer:

Step-by-step explanation:

The bumblebee flutters its wings more times in 1 minute, as it flutters its wings 7,800 times in one minute, whereas the hummingbird flaps its wings 80 times in one second, which translates to 4,800 times in one minute.

To understand this calculation in more detail, we can use unit conversions and multiplication. Since the hummingbird's wing flaps are given in seconds and the bumblebee's wing flutters are given in minutes,

we convert the hummingbird's wing flaps from seconds to minutes by multiplying by 60. We then compare the total number of wing flaps for each animal and find that the bumblebee flutters its wings more times in one minute than the hummingbird flaps its wings.

This is due to the bumblebee's higher frequency of wing movement, which enables it to achieve more wing flutters in a given amount of time.

To know more about  bumblebee flutters refer here:

https://brainly.com/question/26325197#

#SPJ11

The missing measures are BC ≈ 23.77, angle BCA = 24 degrees, AB ≈ 56.77, and CD ≈ 56.77.

To solve the problem, we can use the properties of rectangles and trigonometry.  Since ABCD is a rectangle, we know that angle ABC is also 90 degrees.

Using the Pythagorean theorem, we can find the length of BC:

BC² = AB² - AC²

BC² = 9² + 22²

BC² = 565

BC ≈ 23.77

Using the fact that the sum of the angles in triangle ABC is 180 degrees, we can find the measure of angle BCA

m(BCA) = 180 - m(ABC) - m(CAB)

m(BCA) = 180 - 90 - 66

m(BCA) = 24 degrees

Using trigonometry, we can find the length of AB

sin(24) = AC/AB

AB = AC/sin(24)

AB ≈ 56.77

Finally, we can find the length of CD, which is equal to AB

CD = AB ≈ 56.77

Therefore, the measures of AB ≈ 56.77, and CD ≈ 56.77.

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ4

To conduct a hypothesis test comparing the mean voltages of the two types of batteries (K and Q), you'll need to state the null and alternative hypotheses. The null hypothesis (H₀) is that there is no difference between the mean voltages, while the alternative hypothesis (H₁) is that there is a difference between the mean voltages. In this case:

Step 1 of 5: State the null and alternative hypotheses for the test.

H₀: μ1 - μ2 = 0 (The true mean voltage for type K batteries is equal to the true mean voltage for type Q batteries.)

H₁: μ1 - μ2 ≠ 0 (The true mean voltage for type K batteries is not equal to the true mean voltage for type Q batteries.)

In the next steps, you would calculate the test statistic, determine the critical value, make a decision to reject or fail to reject the null hypothesis, and finally interpret the results based on the 0.02 level of significance.

To know more about null hypothesis refer here

https://brainly.com/question/19263925#

#SPJ11

Answer:

12 is the answer

Step-by-step explanation:

6 y = 6 × 36 in. ( y = yards, in = inches )

do the math:

6(36) ÷ 18 = 12 ( for 18 sections of course )

12 × 18 = 6 × 36

becuase;

12 × 18 = 216 \

                       ——- They are the same

6 × 36 = 216  /

= 216

Divide

216 ÷ 18 = 12

12 being the answer

Answer:

12 inches long

Step-by-step explanation:

One yard is equal to 36 inches, so 6 yards is equal to:

[tex]\sf:\implies 6 \times 36 = 216\: inches[/tex]

To find the length of each section, we need to divide the total length of the banner (216 inches) by the number of sections (18):

[tex]\sf:\implies 216 \div 18 = \boxed{\bold{\:\:12\:\:}}\:\:\:\green{\checkmark} [/tex]

Therefore, each section is 12 inches long.

The system of equations has one solution.

To determine whether the system of equations has one solution, no solution, or infinite solutions, we will compare the slopes and y-intercepts of the given equations:

Equation 1: [tex]y = (\frac{2}{3})-1[/tex]
Equation 2: y = -x + 4

Step 1: Identify the slopes and y-intercepts of each equation.
For Equation 1, the slope is 2/3, and the y-intercept is -1.
For Equation 2, the slope is -1, and the y-intercept is 4.

Step 2: Compare the slopes and y-intercepts.
The slopes are different (2/3 ≠ -1), and the y-intercepts are also different [tex](\frac{2}{3} ) ≠ 4[/tex].

Your answer: Since the slopes and y-intercepts are different, the system of equations has one solution.

To know more about " system of equations" refer here:

https://brainly.com/question/15272411#

#SPJ11

The interquartile range for the data 18, 16, 7, 5, 8, 6, 4, 3, 2, 12, 17, 18, 20, 4, 22 is 14.

1. Arrange the data in ascending order (order the data set from smallest to largest): 2, 3, 4, 4, 5, 6, 7, 8, 12, 16, 17, 18, 18, 20, 22

2. Determine the median (Q2):

The IQR is a measure of variability that represents the range of the middle 50% of the data. To find it, we need to first calculate the median of the entire data set. Since we have an even number of data points, we take the average of the two middle values:

Median = (8 + 12) / 2 = 10

Next, we need to find the median of the lower half of the data set (also called the first quartile, or Q1). To do this, we take the median of the values below the overall median:

Q1 = (4 + 4) / 2 = 4

Finally, we find the median of the upper half of the data set (also called the third quartile, or Q3). To do this, we take the median of the values above the overall median:

Q3 = (18 + 18) / 2 = 18

3. Find the lower quartile (Q1):

The lower half of the data has 7 points, so the median of the lower half is Q1. Q1 is the 4th value, which is 4.

4. Find the upper quartile (Q3):

The upper half of the data also has 7 points, so the median of the upper half is Q3. Q3 is the 12th value, which is 18.

5. Calculate the interquartile range (IQR) by subtracting Q1 from Q3:

IQR = Q3 - Q1

= 18 - 4

= 14.

The interquartile range (IQR) for the given data is 14.

Learn more about interquartile range (IQR):

https://brainly.com/question/8936716

#SPJ11

The volume of a triangular prism in question number 3, obtained from the product of the area of a triangle and the thickness of the prism is 1,728 mi³

A triangular prism consists of two triangular bases and three sides that are rectangular.

The solid in the figure in question number 3 is a triangular prism, with the following dimensions.

Base length = 30 mi.

Thickness (depth of the prism) = 8 mi

Shape of the triangles = Right triangles

Leg lengths of the right triangles = 18 miles and 24 miles

The volume of the triangular prism = Area of the cross section of the triangular prism × Depth of the prism

Area of the triangular cross section of the triangular prism = (1/2) × 18 × 24 = 216 mi²

Volume of the triangular prism = 216 mi² × 8 mi = 1728 mi³

The volume of the triangular prism in the figure is therefore; 1,728 mi³

Learn more about the volume of a prism here: https://brainly.com/question/31193985

#SPJ1

The number of prizes Sam able to buy = 5

Given that;

Sam bought 1 prize for each 5 tickets

Which means he can buy 1 prize for 1 ticket

Since number of ticket Sam has = 5

Therefore he can buy

1 prize for 1 ticket

2 prizes for 2 tickets

3 prizes for 3 tickets

4 prizes for 4 tickets

5 prize4s for 5 tickets

Hence Sam can buy maximum 5 prizes.

To learn more about counting visit:

https://brainly.com/question/29269537

#SPJ1

Answer:

-17 and -5

Step-by-step explanation:

-5 x -17 = 85

-5 + -17 = -22

The number of tire rotations depends on the distance traveled by the wheel and the circumference of the tire. Different tire sizes would change the circumference of the tire, and therefore the number of rotations of the wheel

1. Compare the original rotations _______ vs new rotations _________.

Without knowing the original and new rotations, answer cannot be provided

2.The number of tire rotations depends on the distance traveled by the wheel and the circumference of the tire. If the wheel traveled a greater distance, the number of rotations would increase, and if it traveled a shorter distance, the number of rotations would decrease. Similarly, if the tire's circumference increased, the number of rotations would decrease, and if the circumference decreased, the number of rotations would increase.

3. Different tire sizes would change the circumference of the tire, and therefore the number of rotations of the wheel. A larger tire size would result in fewer rotations for the same distance traveled, while a smaller tire size would result in more rotations for the same distance traveled. Therefore, when changing tire sizes, it's important to consider the effect on speedometer readings and potential changes in vehicle handling

To know more about rotations refer to

https://brainly.com/question/2078551

#SPJ11

The surface area of the storage bin is 34.8ft²². Storage capacity will the storage bin have 13.5ft³.

The area of a square is composed of (Side) (Side) square units. The area of a square equals d22 square units when the diagonal, d, is known. For instance, a square with sides that are each 8 feet long is 8 8 or 64 square feet in area. (ft2).

a=2*5-2>.5

b = 2 .

c = 2.1 ft

S = 2(3 * 2 * 2) + 3 * 2 + 2 * 1/v * 1/v

x 2+ 1 2 *3+3*1*3

= 2 deg + 6 + 1 + 1.5 + 6 * 3

= 34.8ft²

V = V Triangle prism + Vandrangular prism.

= 3×2×2 + 2 x = x2x2

= 12+ 1.5

= 13.5ft³

To know more about surface area visit:-

https://brainly.com/question/29298005

#SPJ9

Question:

Dave wants to know the amount of material he needs

to buy to make the bin. What is the surface area of the

storage bin?

Part B

How much storage capacity will the storage bin have?

Answer:

Baltimore Train: 1,020 mi/12 hr = 85 mph

Pennsylvania Train: 75 mph

So the correct answer is A.

El peso de Mariana en kilogramos es aproximadamente 79.378 kg. Debe conseguir 1.361 kg de pollo a la semana, 4.082 kg de frutas y 6.803 kg de verduras.

Para convertir el peso de Mariana de libras a kilogramos, debemos recordar que 1 libra equivale a aproximadamente 0.4536 kilogramos. Por lo tanto:

Peso de Mariana en kilogramos = 175 libras * 0.4536 kg/libra ≈ 79.3792 kg

Entonces, el peso de Mariana es aproximadamente 79.3792 kilogramos.

En cuanto a la cantidad de pollo que Mariana debe conseguir a la semana, la dieta establece que debe consumir 3 libras de pollo. Para convertirlo a kilogramos:

Cantidad de pollo a la semana = 3 libras * 0.4536 kg/libra ≈ 1.3618 kg

Por lo tanto, Mariana debe conseguir aproximadamente 1.3618 kilogramos de pollo a la semana.

De manera similar, para las frutas, la dieta establece 9 libras. Convertimos a kilogramos:

Cantidad de frutas a la semana = 9 libras * 0.4536 kg/libra ≈ 4.0824 kg

Por lo tanto, Mariana debe conseguir aproximadamente 4.0824 kilogramos de frutas a la semana.

Para las verduras, la dieta establece 15 libras. Convertimos a kilogramos:

Cantidad de verduras a la semana = 15 libras * 0.4536 kg/libra ≈ 6.804 kg

Por lo tanto, Mariana debe consumir aproximadamente 6.804 kilogramos de verduras (cocinadas o crudas) a la semana.

En resumen, el peso de Mariana es de aproximadamente 79.3792 kilogramos. Debe conseguir alrededor de 1.3618 kilogramos de pollo, 4.0824 kilogramos de frutas y 6.804 kilogramos de verduras a la semana.

Learn more about  Mariana

brainly.com/question/28633863

#SPJ11

The width of Micayla's frame is Wf = (Lf x Wp) / Lp

Let's say that the painting has a length of Lp and a width of Wp, and the frame has a length of Lf and a width of Wf. We want to find the width of the frame, which we can call x. We know that Micayla wants to keep the same ratio of length to width between the painting and the frame, so we can set up the following equation:

Lp/Wp = Lf/Wf

This equation states that the ratio of the length to the width of the painting is equal to the ratio of the length to the width of the frame. We can use this equation to solve for x, the width of the frame. First, we can cross-multiply to get:

Lp x Wf = Lf x Wp

Then, we can solve for x by isolating it on one side of the equation:

Wf = (Lf x Wp) / Lp

This equation tells us that the width of the frame is proportional to the length of the frame and the width of the painting, divided by the length of the painting. By plugging in the appropriate values for Lp, Wp, and Lf, we can solve for x and determine the width of the frame.

To know more about proportion here

https://brainly.com/question/24232216

#SPJ4

The missing step in solving the inequality 4(x – 3) /4 < 10/6x is to divide both sides by 2.

Apply the distributive property to get 4x - 12 /4 < 10/6x.

Combine like terms to obtain 4x - 3 < 5/3x.

Add 3/3x to both sides to get 4x < 8/3x + 3.

Subtract 8/3x from both sides to get 4/3x < 3.

Divide both sides by 4/3 to get x < -9/4.

Simplify the result by dividing both sides by 2 to get x < -9/2 or x > -4/3.

Therefore, the missing step is to divide both sides by 2, which gives x < -9/2 or x > -4/3.

For more questions like Property click the link below:

https://brainly.com/question/14492876

#SPJ11

Answer:

E,F,H

Step-by-step explanation:

Answer:

B = 2 (could be 4, like with this font)

E = 4

F = 3

H = 4

P = 0 (could be 3, like this this font)

R = 0 (could be 3, like with this font)

X = (could be 4)

Other right angles:

D = 0 (could be 2, like with this font)

L = 1

T = 2

Y = (could be 1)

To find the slope of the tangent line to the polar curve, we need to find the derivative of the equation with respect to θ.

First, we can convert the polar equation into rectangular coordinates using the conversions rcos(θ) = x and rsin(θ) = y:
rcos(θ) = (1-2sin(θ))cos(θ)
r = x/cos(θ)
x/cos(θ) = 1 - 2sin(θ)
x = cos(θ) - 2sin(θ)cos(θ)
y = sin(θ) - 2sin^2(θ)

Next, we can find the derivative of y with respect to x using the chain rule:
dy/dx = (dy/dθ) / (dx/dθ)
dy/dθ = cos(θ) - 4sin(θ)cos(θ)
dx/dθ = -sin(θ) - 2cos^2(θ)
Plugging in the value of e for θ, we get:
dy/dθ = cos(e) - 4sin(e)cos(e)
dx/dθ = -sin(e) - 2cos^2(e)

Finally, we can find the slope of the tangent line by taking the ratio of dy/dθ to dx/dθ:
slope = (cos(e) - 4sin(e)cos(e)) / (-sin(e) - 2cos^2(e))
This is the slope of the tangent line to the polar curve at the point specified by the value of e.
Hi! I'd be happy to help you with your question. To find the slope of the tangent line to the polar curve r = 1 - 2sin(θ) at a specific value of θ, we'll first need to convert the polar equation into Cartesian coordinates.
Let's recall the conversion formulas:
x = r*cos(θ)
y = r*sin(θ)

Now, substitute the polar curve equation into these formulas:
x = (1 - 2sin(θ))*cos(θ)
y = (1 - 2sin(θ))*sin(θ)
To find the slope, we need the derivative of y with respect to x, which is dy/dx. To do this, we'll first find dy/dθ and dx/dθ.
Differentiating both x and y with respect to θ:
dx/dθ = -2cos(θ)^2 + 2sin(θ)cos(θ)
dy/dθ = -2sin(θ)^2 + 2sin(θ) - 2sin(θ)cos(θ)
Now, we find the derivative of y with respect to x:
dy/dx = (dy/dθ) / (dx/dθ)
dy/dx = (-2sin(θ)^2 + 2sin(θ) - 2sin(θ)cos(θ)) / (-2cos(θ)^2 + 2sin(θ)cos(θ))

Now, you can plug in the specific value of θ for which you want to find the slope of the tangent line to the polar curve, and simplify the expression to obtain the final answer.

To know more about Equation click here .

brainly.com/question/29657983

#SPJ11

The current drawn by each resistor is: R1: 8 A R2: 9.25 A R3: 14.67 A And the power dissipated by each resistor is: R1: 192 W R2: 222 W R3: 352 W

To calculate the current drawn by each resistor and the power dissipated by each, we will use Ohm's Law and the Power formula.

Ohm's Law is V = IR, and the Power formula is P = IV.

Given: Resistor 1 (R1) = 192 W Resistor 2 (R2) = 222 W Resistor 3 (R3) = 352 W Voltage (V) = 24 V

Step 1: Calculate the current (I) drawn by each resistor using the Power formula (P = IV):

For R1: I1 = P1 / V = 192 W / 24 V = 8 A

For R2: I2 = P2 / V = 222 W / 24 V = 9.25 A

For R3: I3 = P3 / V = 352 W / 24 V = 14.67 A

Step 2: Calculate the power (P) dissipated by each resistor using the Power formula (P = IV):

For R1: P1 = I1 × V = 8 A × 24 V = 192 W

For R2: P2 = I2 × V = 9.25 A × 24 V = 222 W

For R3: P3 = I3 × V = 14.67 A × 24 V = 352 W

So, the current drawn by each resistor is: R1: 8 A R2: 9.25 A R3: 14.67 A And the power dissipated by each resistor is: R1: 192 W R2: 222 W R3: 352 W

Know more about Ohm's Law,

https://brainly.com/question/30298199

#SPJ11

The area of the region enclosed by x + y² = 2 and x + y = 0 is 4/3 + 4√2/3 square units.

To find the limits of integration, we need to solve for the intersection points of the two curves.

Substituting x = -y from the second equation into the first equation, we get:

Using the quadratic formula, we get:

Since we're dealing with a real-valued area, we can discard the complex solution. The two intersection points are:

We can see from the graph below that the region we're interested in is the one enclosed by the curves, which lies to the left of the y-axis.

The limits of integration for the area are y = 0 (the x-axis) and y = 1 + √2.

Since the curves intersect at right angles, we can integrate with respect to either x or y. However, since the region is easier to express in terms of y, we'll integrate with respect to y.

The equation for the curve x + y² = 2 can be rearranged as:

The area of the region is given by:

Learn more about Limits of integration

brainly.com/question/31013115

#SPJ11

If t is less than -1.699, we reject the null hypothesis.

To test the claim by the owner of the large dealership, we will use a one-sample t-test with the following hypotheses:

Null Hypothesis: H0: µ >= µ0 (The population mean time of ownership is greater than or equal to µ0)

Alternative Hypothesis: Ha: µ < µ0 (The population mean time of ownership is less than µ0)

where µ is the population mean time of ownership, µ0 is the claimed mean time of ownership by the owner of the dealership.

The significance level is α = 0.05.

We can calculate the t-value as:

t = ([tex]\bar{x}[/tex] - µ0) / (s / √n)

where [tex]\bar{x}[/tex] is the sample mean time of ownership, s is the sample standard deviation, n is the sample size.

Plugging in the values given in the problem, we get:

t = ([tex]\bar{x}[/tex] - µ0) / (s / √n) = (5.7 - µ0) / (1.8 / √n)

Since the alternative hypothesis is one-tailed (less than), we need to find the critical t-value from the t-distribution table with n-1 degrees of freedom and a significance level of 0.05. For a sample size of n = 30 (assuming it is large enough), the critical t-value is -1.699.

If the calculated t-value is less than the critical t-value, we reject the null hypothesis and conclude that there is evidence to support the claim that the mean time of ownership for all cars is less than the claimed mean time of ownership by the owner of the dealership.

If the calculated t-value is greater than the critical t-value, we fail to reject the null hypothesis and conclude that there is not enough evidence to support the claim that the mean time of ownership for all cars is less than the claimed mean time of ownership by the owner of the dealership.

So, if we assume that the sample is representative of the population and meets the assumptions of the t-test, we can calculate the t-value as:

t = (5.7 - µ0) / (1.8 / √30)

If t is less than -1.699, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.

Note that we don't have any information about the claimed mean time of ownership by the owner of the dealership, so we cannot calculate the t-value or make any conclusions.

To know more about t-test, refer to the link below:

https://brainly.com/question/31359683#

#SPJ11

Answer: 35 + 25 + 50 / 2 = 85

Step-by-step explanation: You would have to add them all together and then divide them by 2.

a. The cost for a 100-mile radius for 3 weeks is $585, and there are 98 resumes within this radius, so the average cost per resume would be:

$585 / 98 = $5.96 per resume

b. The cost for a 150-mile radius for 3 weeks is $675, and there are 208 resumes within this radius, so the average cost per resume would be:

$675 / 208 = $3.25 per resume

c. If an employer opts for the 150-mile radius option instead of the 100-mile radius option, they would pay an extra $90 ($675 - $585) to see an additional 110 resumes (208 - 98).

The average cost to the employer for looking at each extra resume would be:

$90 / 110 = $0.82 per resume

d. An advantage of opting for the more expensive plan is that the employer would have access to a larger pool of potential candidates, which could increase the likelihood of finding a qualified applicant.

A disadvantage is that the employer would have to pay more money, which could be a significant expense for smaller businesses or those with limited budgets.

To know more about resumes refer here

https://brainly.com/question/862477#

#SPJ11

Susan earns $9.50 per hour. This is found by dividing her earnings by the number of hours worked for each corresponding row in the table.

To find how much money Susan earned per hour, we need to divide the total earnings by the total number of hours worked. For finding the Total earnings we need to add the money earned in every hour,

Total earnings = $47.50 + $66.50 + $85.50 + $104.50 = $304

Total hours worked = 5 + 7 + 9 + 11 = 32

Money earned per hour = Total earnings / Total hours worked

= $304 / 32

= $9.50

Therefore, Susan earned money of $9.50 per hour.

To know more about Money earned:

https://brainly.com/question/13510603

#SPJ4