The process that breaks rock material into smaller pieces by atmospheric and biotic agents is called weathering. Weathering is the breakdown of rocks at or near the Earth’s surface. It involves the physical disintegration and chemical decomposition of the rock material.
This results in the formation of smaller rock fragments, mineral particles, and dissolved ions.The two main types of weathering are mechanical or physical weathering, and chemical weathering. Mechanical weathering is the process that breaks rock material into smaller pieces by atmospheric and biotic agents. It includes processes such as abrasion, frost wedging, and exfoliation. On the other hand, chemical weathering involves the transformation of rock material into different compounds by chemical reactions with substances such as water, oxygen, and acids. Denudation is best described as all actions that lower the surface of the continents. It is the combined action of weathering, erosion, transportation, and deposition. Denudation is a major geologic process that results in the wear and tear of the Earth’s surface. It is responsible for shaping the landscape features that we see around us. Denudation can be caused by both natural and human activities. It can result in the removal of soil, rocks, minerals, and other materials from the Earth’s surface.
For more information on biotic agents visit:
brainly.com/question/28391642
#SPJ11
Which of the following renewable energies is most limited it
where it could be used on the Earth?
A. Geothermal
B. Biomass
C. Solar
D. Hydroelectric
E. Wind
The most limited renewable energy source regarding its usage on Earth is geothermal power. The reason behind this is that geothermal energy can only be harnessed in regions that have tectonic activity, and these areas are limited globally.
The correct option is geothermal power.
Geothermal power plants require the presence of a natural geothermal reservoir, which is a combination of water and steam that is located below the Earth's surface.
What is renewable energy?Renewable energy is a source of energy that is produced from natural processes and can be replenished over a short period. Such energy sources include sunlight, wind, rain, geothermal heat, and tidal waves. The concept of renewable energy is based on the principle of sustainability, and it aims to provide energy while not depleting natural resources or harming the environment. Renewable energies are a crucial part of the global strategy to tackle climate change. These energy sources help in reducing greenhouse gas emissions and air pollution. With the increasing demand for energy, the use of renewable sources of energy is expected to continue to grow. For example, solar and wind power have seen tremendous growth in recent years. The major renewable energy sources include: Solar powered power hydroelectric power geothermal power Biomass energy ocean energy The most limited renewable energy source in terms of its usage is geothermal power. Geothermal energy can only be harnessed in areas with tectonic activity, and these regions are limited globally. Other renewable sources of energy can be used in most parts of the world without any limitations.
To know more about geothermal power visit:
https://brainly.com/question/27442707
#SPJ11
what is the most likely explanation for why the city in the question above has such a problem with acid precipitation?
The most likely explanation for why the city in the question above has such a problem with acid precipitation is because the area is heavily industrialized, with numerous factories and power plants that emit large amounts of sulfur dioxide and nitrogen oxides into the air.
These pollutants react with water, oxygen, and other chemicals in the atmosphere to form sulfuric and nitric acids, which then fall to the ground as acid precipitation. Another factor that may contribute to the city's problem with acid precipitation is its geographic location.
If the city is situated in a valley, surrounded by mountains, or near a large body of water, it may be more susceptible to experiencing acid precipitation due to the way weather patterns and wind currents move pollutants across the region.In addition, if the city has a high population density and many vehicles on the road, this can also contribute to the problem of acid precipitation.
Exhaust fumes from cars and trucks contain pollutants that can react with other chemicals in the atmosphere to form acid rain, snow, or fog. To sum up, the city's high levels of industrialization, geographical location, and high population density may be the main reasons for its problem with acid precipitation.
To know more about industrialization, visit:
https://brainly.com/question/32029094
#SPJ11
Which of the following processes is the most effective at controlling nitrogen and sulfur emissions and why? Fluidized Bed Combustion, Retrofitted Flue Gas Combustion, or SONOX you can consider chemical efficiency, cost, and any other practical matters.
The SONOX process is the most effective at controlling nitrogen and sulfur emissions. It has the highest chemical efficiency, is the most cost-effective, and is the most practical of the three procedures. The SONOX process is therefore the best alternative for companies aiming to reduce nitrogen and sulfur emissions.
There are various procedures for limiting nitrogen and sulfur emanations, but among Fluidized Bed Combustion, Retrofitted Flue Gas Combustion, or SONOX, the SONOX procedure is the most effective. It has the highest chemical effectiveness, the lowest cost, and the highest functional reliability, which are the reasons why it is the most effective.SONOX is the most effective process for controlling nitrogen and sulfur emissions because of the following reasons: Chemical Efficiency: SONOX has the highest chemical efficiency among the three processes. The process is ideal for reducing nitrogen oxide (NOx) emissions while maintaining combustion efficiency. It does this by injecting urea solution into the exhaust stream. The urea solution reacts with the NOx in the exhaust gas and converts it into nitrogen, oxygen, and water. This reaction can eliminate up to 90% of NOx emissions and reduce ammonia emissions to less than 10 ppm.Cost: SONOX is the most cost-effective among the three procedures. The equipment for SONOX is less expensive and easy to install. The process's installation does not require any significant changes to the existing combustion system. Additionally, the urea solution is less expensive than the other chemical reagents utilized by the other processes.Practical matters: SONOX is the most practical procedure among the three. The process has been tested and demonstrated to be reliable, consistent, and easy to use. The SONOX process does not generate any toxic substances, and the equipment is simple to operate. It has been applied to a wide range of combustion systems, including boilers, furnaces, gas turbines, and diesel engines.
To know more about SONOX process visit:
brainly.com/question/31440052
#SPJ11
what is a small chunk of rock or metal that is traveling through earth's atmosphere and glowing due to adiabatic heating?
Meteor.is a small chunk of rock or metal that is traveling through earth's atmosphere and glowing due to adiabatic heating.
A meteor is a small chunk of rock or metal that enters Earth's atmosphere from space. As it travels through the atmosphere, it experiences intense friction, causing it to heat up and glow. This glowing phenomenon is known as adiabatic heating. The high temperatures generated by the friction cause the meteor to appear as a streak of light in the night sky, commonly referred to as a shooting star. Meteors can vary in size, ranging from tiny particles to larger objects, and they often burn up completely before reaching the Earth's surface.
learn more about:- Meteor here
https://brainly.com/question/11504264
#SPJ11
What is the current explanation of why hot spring pools are easily created around the caldera?
a. The volcano is entering into another volcanic period.
b. There is remnant heat trapped near surface from the last eruption
c. The magma chamber is unusually close to the surface.
d. The magma chamber is degassing at a high rate, heating groundwater in the cladera
Hot spring pools are easily created around the caldera because the magma chamber is degassing at a high rate, heating groundwater in the caldera. This is the current explanation for the formation of hot spring pools around the caldera.
What is a caldera?
A caldera is a large volcanic crater, usually circular in shape, formed by the collapse of the central part of a volcano. It is usually formed as a result of a massive volcanic eruption, which results in the emptying of the magma chamber and the collapse of the ground above it. Hot spring pools are easily created around the caldera because of the heat energy that is trapped beneath the surface.
What causes hot spring pools?
Hot spring pools are created when groundwater is heated by magma, which is located below the Earth's surface. When this heated water rises to the surface, it creates a pool of hot water that can be used for recreational activities. The temperature of the water in a hot spring pool can vary depending on the amount of heat generated by the magma chamber. The temperature of the water can range from warm to scalding hot, depending on the amount of heat being generated by the magma chamber.
To know more about volcanic eruptions, visit:
https://brainly.com/question/30028532
#SPJ11
When Vietnam opened up its economy to foreign investment under the doi moi program the economy has been in crisis, as foreign companies siphon off profits to the rich world. the economy has responded well, and now exports garments, footwear, and electronics. all of these the economy has returned to primarily exporting raw materials, which is its comparative advantage.
When Vietnam opened up its economy to foreign investment under the doi moi program, the economy was in crisis.
Initially, foreign companies siphoned off profits to the rich world, creating imbalances and causing significant concerns in the Vietnamese economy. However, the economy has since responded positively to foreign investment. Vietnam now exports garments, footwear, and electronics, among other products, to the world market.
In recent years, the economy has returned to primarily exporting raw materials, which is its comparative advantage. This has helped to bolster the country’s economic growth, reduce poverty, and increase the overall standard of living. By exporting raw materials, Vietnam has been able to take advantage of its natural resources, which has been essential to the country's overall economic success. The country has also invested heavily in infrastructure, education, and healthcare, which has helped to create a skilled workforce and a stable economy.
Vietnam's economic progress is evident, with the country's GDP growth rate averaging 6-7% over the past decade. Despite the challenges posed by the COVID-19 pandemic, the economy has continued to grow, albeit at a slower pace. Foreign investment is still a critical factor in the country's economic growth, with many multinational corporations investing in Vietnam due to the country's favorable business environment and competitive labor costs.
Learn more about foreign investment here:
https://brainly.com/question/20376241
#SPJ11
Describe the Humid Subtropical Climate (Cfa)?
E climates are polar climates with extremely cold summers
Name four countries of the world, other than the U.S., that have areas with E climates
In what region of North America does the E climate prevail
The Humid Subtropical Climate (Cfa) is characterized by hot and humid summers, mild winters, and year-round rainfall.
The Humid Subtropical Climate (Cfa) is a climate classification that represents regions with specific weather patterns. It is characterized by hot and humid summers, with temperatures often exceeding 30°C (86°F). Winters are mild, with average temperatures above freezing. The Cfa climate zone is known for its abundant rainfall throughout the year, with no distinct dry season. This climate is typically found in subtropical regions near the eastern coasts of continents, influenced by maritime tropical air masses. Examples of regions with Cfa climate include parts of the southeastern United States, China, Japan, and Brazil.
Learn more about Humid Subtropical Climate here:
https://brainly.com/question/19059294
#SPJ11
hello, does anyone has ever done a PSA video about recycling and
waste for ecology and envirnomental science if yes can you please
send ?
Yes, there are many PSA videos available on recycling and waste management for ecology and environmental science.
You can find them by searching online video platforms using relevant keywords. These videos aim to raise awareness and educate viewers about the importance of recycling and proper waste disposal for environmental conservation. They often provide practical tips and information on how individuals can contribute to a more sustainable future.
learn more about PSA here:
https://brainly.com/question/29710203
#SPJ11
Vietnam became a unified, independent, and communist state in 1975, after US forces withdrew from conflict there. By the early 1980s 1)it had become one of the world's poorest countries. 2)it was thriving to a much greater degree than under French control. 3)agriculture was thriving 4)there were abundant consumer goods in stores.
In the early 1980s, Vietnam had become one of the world's poorest countries. Despite this, the country was thriving to a much greater degree than under French control. Option 2 is right.
Vietnam is a country located in Southeast Asia that became a unified, independent, and communist state in 1975, after US forces withdrew from the conflict. After the war, the country went through significant changes that affected its economy and way of life.
Vietnam had made remarkable progress in its agricultural sector and was successful in feeding its people. The government invested heavily in this sector, and the country became one of the world's largest rice exporters. Agriculture was thriving, and Vietnam had made notable progress in other areas of the economy, including industry and services. The country was also making strides in the provision of education and healthcare.
The government had implemented policies to increase the number of schools and medical facilities, making these services more accessible to the people. Furthermore, the country saw an increase in the availability of consumer goods in stores. By the 1990s, Vietnam was no longer one of the poorest countries in the world but had made significant progress towards becoming a middle-income country.
Learn more about middle-income country here:
https://brainly.com/question/32371644
#SPJ11
Explain why Wegner's use of shorelines to match continents in his reconstruction of Pangaea was criticized by other geoscientists and how that issue was subsequently resolved in Plate Tectonic Theory. 2- Explain briefly why a divergent plate boundary is also called a "constructive margin or boundary." 3- Briefly explain how density affects subduction. 4- Briefly explain how magnetic patterns on the seafloor support Plate Tectonic theory. 5- Briefly explain why the oceanic ridges are higher than the surrounding ocean basins.
Other geoscientists criticized Wegner's reconstruction of Pangaea since it relied exclusively on the visual fit of the coasts to match continents.
As it is characterized by the separation of tectonic plates, which results in the formation of new crust, a divergent plate boundary is also known as a "constructive margin or boundary".
The buoyancy of tectonic plates is influenced by density, which has an impact on subduction. When one tectonic plate—typically an oceanic plate—sinks beneath another plate—typically a continental plate—subduction occurs.
Due to the identification of magnetic anomalies, plate tectonic theory is supported by magnetic patterns on the seabed. At mid-ocean ridges, molten lava spews forth minerals that were aligned with the Earth's magnetic field when it formed.
Learn more about plate boundary, here:
https://brainly.com/question/31720127
#SPJ1
Use all of the listed terms in any sequence in one phrase that makes scientific sense in each of the following. You may use additional terms, such as conjunctions, but no simple definition lists.
(1) emission, spectroscopy, absorption, heat, continuum, [name of a celebrity]
(2) Kelvin, collapse, gravitational, heat, differentiation, [name of a planet]
(3) radio, ultraviolet, microwave, electromagnetic, gamma, [any color other than black or white]
A conclusion can be derived from the spectroscopy of emission and absorption which determines the continuum of heat which is related to name of a celebrity.
Spectroscopy is the scientific study of the interaction between radiation and matter. It involves the measurement of different kinds of electromagnetic radiation emitted or absorbed by matter and provides information on the physical properties of matter. Emission and absorption spectroscopy both contribute to determining the continuum of heat. The study of heat is significant in scientific research as it can have a significant impact on the reactions and behavior of matter. A famous celebrity can be used to give context and bring attention to the importance of scientific research in our lives.
In the study of spectroscopy, emission and absorption are important in determining the continuum of heat which has significant scientific importance and relevance to everyday life. By associating a celebrity with this information, it can help bring attention and interest to the significance of scientific research.
To know more about spectroscopy visit:
https://brainly.com/question/13265448
#SPJ11
What is the magnitude number using the scales below? Given: Amplitude 50mm & S-P of 20sec 60f600 +-200 -400 40 100 300 -50 30- 200 20 -20 10 -5 10 100 660 440 --2 Fu 2 20 5 S-P DIST 100 kn -RICHTER MAGNITUDE AMPLITUDE in my A. Richter 4 B. Richter 5 C. Richter 6 D. Richter 7 QUESTION 59 An earthquake measuring 8 on the Richter Scale releases about A. 10 times B. 3 times C. 30 times D. 900 times
The magnitude number using the given scales corresponds to a Richter magnitude of 7 (Option D).
Based on the given information, the amplitude of 50 mm corresponds to a Richter magnitude of 7. The Richter scale is a logarithmic scale that measures the energy released by an earthquake. Each increase of one magnitude on the Richter scale represents a tenfold increase in the amplitude of ground motion and approximately 31.6 times more energy release. Therefore, an earthquake with a Richter magnitude of 7 is significantly stronger than smaller magnitudes and indicates a substantial release of energy.
To know more about Richer magnitude, visit:
https://brainly.com/question/15619895
#SPJ11
generally speaking, activity on the surface of the sun is primarily driven by
The activity on the surface of the sun is primarily driven by the magnetic field of the sun. The sun's magnetic field is a complex and dynamic system that is responsible for the appearance of sunspots, solar flares, and coronal mass ejections.
The magnetic field of the sun is created by the movement of charged particles within the sun's interior. As these particles move, they generate electrical currents, which in turn create a magnetic field. This magnetic field is constantly changing, and the changes in the field can cause the activity on the sun's surface to vary.
One important aspect of the sun's magnetic field is that it is not uniform. There are areas of the sun where the magnetic field is stronger than in other areas. These areas are known as sunspots, and they are characterized by a dark spot on the surface of the sun. The magnetic field in these areas is so strong that it inhibits the flow of heat from the interior of the sun to the surface. As a result, sunspots are cooler than the surrounding areas and appear dark.
Another important aspect of the sun's magnetic field is that it can become twisted and contorted. When this happens, the energy stored in the magnetic field can be released in a violent explosion known as a solar flare.
To know more about magnetic visit :
https://brainly.com/question/3617233
#SPJ11
First, we must calculate how rapidly limestone is being removed from the floor of the valley. Most of the limestone leaving the valley is dissolved in Spring Creek. Later, we will discuss chunks of limestone being rolled, bounced or otherwise carried out of the valley by Spring Creek, although these are rare. There is almost no loss or gain of limestone in the wind, and meteorite falls are VERY rare and can be ignored.
About 1 m (just over 3 feet) of rain per year falls on Happy Valley. About two-thirds of this is used by trees and evaporated, and one-third leaves the valley in Spring Creek. That water which leaves in Spring Creek, called runoff, contains a lot of dissolved limestone, which is picked up from the ground. Spring Creek water averages about 0.33 kilograms (0.33 kg) of limestone for each cubic meter (1 m3) of water. (1 kg is 2.2 pounds, and 1 m3 is a cube just over 3 feet on a side), so the limestone in the water weighs 0.33 kg/m3.
If Spring Creek collects a layer of water 0.3 m thick from all of Happy Valley each year (0.3 m3 from each square meter or m2), and each cubic meter of Spring Creek water contains 0.32 kg of limestone, then how much limestone is lost from each square meter of Happy Valley each year, on average? (Note that the units are included and calculated properly for you here, but you should understand what was done, and why.) 0.3 m3/m2/yr x 0.32 kg/m3 = __________ kg/m2/yr.
To calculate the amount of limestone lost per square meter of Happy Valley per year, the amount of water collected by Spring Creek (0.3 m^3/m^2/year) and the limestone content in the water (0.32 kg) multiply by /m^3):
0.3 m^3/m^2/year x 0.32 kg/m^3 = 0.096 kg/m^2/year
As a result, Happy Valley loses an average of about 0.096 kilograms of limestone per square meter each year.
The answer is 0.096 kg/m²/year.
Kindly Heart and 5 Star this answer and especially don't forgot to BRAINLIEST, thanks!How much water gathered by Spring Creek (0.3 m3/m2/year) and how much limestone in the water (0.32 kg) are duplicated by/m3 to decide how much limestone lost per square meter in Cheerful Valley every year. 0.32 kg/m3 times 0.3 m3/m2/year brings about 0.096 kg/m2/year.
A Spring Creek is a particular sort of free-streaming stream that gets its name from the wellspring of its water — an underground spring or gathering of springs that continually supplies a specific waterway with water.
Likewise with most regular free-streaming waterways, the water in a spring stream may likewise be powered by snow pack or downpour run-off, however much of the time a spring or other Cheerful Valley underground water source fills in as the brook's just stockpile of water.
Rather than streams loaded up with run-off or spring and summer liquefy off from snow pack, spring rivers every now and again show smooth, steady, and all year water streams.
Learn more about Spring Creek, from :
brainly.com/question/18159920
#SPJ1
Currently, the biggest drawbacks to using the new clean coal technologies are:______
Currently, the biggest drawbacks to using the new clean coal technologies are: High cost and limited scalability.
The current biggest drawbacks to using new clean coal technologies are primarily related to their cost and limited scalability. Implementing advanced technologies to reduce emissions from coal-fired power plants can be expensive, requiring significant investments in research, development, and infrastructure. These costs can make clean coal technologies less economically viable compared to other energy sources. Additionally, the scalability of these technologies can be a challenge.
learn more about:- High cost here
https://brainly.com/question/29734094
#SPJ11
Ancient Greeks and Romans observed Earth's changes and
attributed them to
Ancient Greeks and Romans observed Earth's changes and attributed them to Geologic phenomena. Actions of the gods. The present is the key to the past. Climate change.
Geologic phenomena and the actions of the gods.
Ancient Greeks and Romans attributed Earth's changes to both geologic phenomena and the actions of the gods. They believed that natural events, such as earthquakes, volcanic eruptions, and weather patterns, were caused by the workings of the Earth's geological processes. Additionally, they attributed these phenomena to the actions and influence of various gods and goddesses in their mythology. This understanding of Earth's changes reflected their belief in a combination of natural forces and divine intervention shaping the world around them.
learn more about Geological phenomena here:
https://brainly.com/question/28213361
#SPJ11
Definition of the climate change
the climate means which change after month to month only
1. Briefly define the term map-scale while differentiating small-scale and large-scale maps. How you can use 0.5mm rule to define map scale of raster data sets?
2. List any five different methods of GIS data creation. The methods must cover primary and secondary data sets in raster and vector formats.
3. Briefly describe the structures of raster and vector-based data models. How do these data models differ from one another?
4. List different vector and raster analysis tools mentioning their real-world applications.
5. What is the paradigm shift in cartography? What are the advantages of GIS maps over conventional maps?
6. Briefly describe the common map elements for creating a professional quality map?
7. Write a short note on different cartographic considerations to be followed in order to produce a map.
8. You can briefly describe the importance of map layout, colour combinations, typography, and symbology used for creating a map
9. Briefly describe the three GIS data components (spatial data, attribute data, and metadata).
Map scale: Map scale refers to the ratio or proportion between a distance on a map and the corresponding distance on the Earth's surface. GIS data creation methods: GIS data can be created through digitization, GPS data collection, remote sensing, field surveys, and data conversion. Digitization involves converting analog maps into digital format.
Map Scale indicates the level of detail and the relationship between map features and real-world features. The 0.5mm rule can be used to measure distances on a map and determine the map scale for raster datasets.GPS data collection utilizes satellite-based systems to capture spatial data. Remote sensing uses sensors to gather information about the Earth's surface from a distance. Field surveys involve collecting data on the ground using various instruments. Data conversion converts data between different formats to make it compatible with GIS software. These methods provide diverse sources of data in both raster and vector formats for GIS analysis and mapping.
learn more about GPS here:
https://brainly.com/question/15270290
#SPJ11
ACTIVITY 6: African Immigration
Thousands of Africans immigrate to other countries each year. Write the correct answers using resources other than this Unit.
1) Approximately, how many African immigrants live in the United States today?
2) In what part of Africa are a majority of the African immigrants to the United States from?
3) Approximately, how many African immigrants live in European countries?
4) How many of the African immigrants to Europe are from sub-Saharan Africa ad opposed to North Africa?
The exact figures may vary, but there are approximately 2.8 million African immigrants in the United States, with a majority coming from various regions in sub-Saharan Africa, and there are millions of African immigrants living in European countries, with a higher proportion from sub-Saharan Africa compared to North Africa.
1) According to the Migration Policy Institute, as of 2019, there were approximately 2.8 million African immigrants living in the United States.
2) The majority of African immigrants to the United States come from various regions in Africa. However, significant numbers are reported to originate from countries such as Nigeria, Ethiopia, Ghana, Kenya, and South Africa, among others.
3) The number of African immigrants in European countries can vary across different countries. According to available estimates, there are millions of African immigrants residing in European nations, but specific figures may differ by country.
4) The majority of African immigrants to Europe are from sub-Saharan Africa rather than North Africa. This is due to factors such as political instability, conflict, economic opportunities, and migration patterns. However, the exact breakdown between sub-Saharan Africa and North Africa would require more detailed and specific data from individual European countries.
For more questions on immigrants, visit:
https://brainly.com/question/28791683
#SPJ8
what region of the electromagnetic spectrum would a star give off
if it is hotter than the temperature associated with violet
light?
A star that is hotter than the temperature associated with violet light will emit radiation in the ultraviolet part of the electromagnetic spectrum.
A star emits electromagnetic radiation in all parts of the electromagnetic spectrum, but the radiation it emits in each part of the spectrum is dependent on the star's temperature. If the star's temperature is hotter than the temperature associated with violet light, it would give off radiation in the ultraviolet part of the electromagnetic spectrum. The wavelength of ultraviolet radiation is shorter than that of violet light, and it has higher energy. Ultraviolet radiation can be harmful to human skin and eyes, which is why we can't see it. However, it is essential to life as it helps in the production of vitamin D in our skin.
To know more about temperature visit:
brainly.com/question/7510619
#SPJ11
identify the four seawater constituents that are present in the highest concentration.
The four seawater constituents that are present in the highest concentration are chloride (Cl-), sodium (Na+), sulfate (SO₄²⁻), and magnesium (Mg²⁺).
These four ions collectively make up the majority of dissolved salts in seawater, commonly referred to as "salinity."
Chloride (Cl-) is the most abundant ion in seawater, accounting for approximately 55% of the total dissolved ions. Sodium (Na+) is the second most abundant ion, making up around 30% of the total. These two ions, together with minor contributions from other elements, form common table salt, or sodium chloride (NaCl).
Sulfate (SO₄²⁻) is another significant constituent in seawater, making up roughly 8% of the total dissolved ions. It originates from various sources, including weathering of rocks and volcanic activity.
Magnesium (Mg²⁺) is the fourth most abundant ion, comprising about 3.7% of the dissolved ions. It plays a crucial role in many biological processes and is an essential element for marine organisms.
know more about volcanic activity here:
https://brainly.com/question/1362358
#SPJ8
Arthur Holmes contributed to the Plate Tectonic theory by....... O Proposing Pangaea O Suggesting mantle convection O Discovering the Glossopteris fossil. O Suggesting seafloor spreading
Arthur Holmes contributed to the Plate Tectonic theory by suggesting mantle convection.Arthur Holmes was a geologist who made several important contributions to the field of geology. He was born on January 14, 1890, and died on September 20, 1965.
His work has greatly influenced the modern study of geology and plate tectonics. He is considered one of the pioneers in the fiegeology. HolmesHolmes proposed mantle convection as the driving force behind plate tectonics. He recognized that the Earth's crust is made up of large plates that move slowly over the Earth's mantle. This movement is driven by convection currents in the mantle, which are caused by heat from the Earth's core. These currents cause the plates to move apart, collide, or slide past each other, which creates earthquakes, volcanoes, and other geologic features.In conclusion, Arthur Holmes contributed to the Plate Tectonic theory by suggesting mantle convection.
For more information on geology visit:
brainly.com/question/13428737
#SPJ11
Hypothesis about human activities impact negatively on the quality of water of Mogalakwena river
Human activities impact negatively on the quality of water of Mogalakwena river a point source or non-point source of pollution may be the cause of the contamination in a river. The most prevalent sources of surface water contamination are industrial and agricultural practices, sewage and wastewater (including stormwater runoff), oil pollution, and radioactive materials.
The Mogalakwena River's water quality is negatively impacted by human activities such as deforestation, industrial pollution, water contamination, agricultural runoff, urbanization, and inadequate sewage treatment. The cumulative effect of these actions may lead to a decline in water quality, a loss of biodiversity, and potential harm to the ecosystem as well as to public health.
Learn more about water contamination here:
https://brainly.com/question/31600442
#SPJ1
Which of these would be considered a biotic component of your environment? ► View Available Hint(s) O water O your friend O oxygen O temperature
Among the options provided, your friend would be considered a biotic component of your environment.
Biotic components refer to the living organisms in an environment. In this case, your friend is a living organism, and their presence and interactions with you contribute to the biotic component of your environment. Water, oxygen, and temperature, on the other hand, are abiotic components, as they are non-living factors that play a role in the environment but are not living organisms themselves.
To know more about biotic components, visit:
https://brainly.com/question/31626049
#SPJ11
the earth's core, mantle and crust are concentric shells. what major property is used to distinguish them?
The major property used to distinguish the Earth's core, mantle, and crust is their composition.
The Earth's core, mantle, and crust are the three main layers that make up the structure of the Earth. They are distinguished based on their composition, which refers to the types of materials and elements that make up each layer.
The Earth's core is predominantly composed of iron and nickel, with some lighter elements. It is divided into the outer core and the inner core, with the outer core being liquid and the inner core being solid due to high pressure.
The mantle, located between the core and the crust, is primarily composed of silicate minerals rich in iron and magnesium. It is a semi-fluid layer that experiences slow convection currents.
To know more earth, visit:
https://brainly.com/question/32393713
#SPJ11
Below a converging plate boundary on Earth, the mantle rock is sinking. Is this sinking mantle rock hotter or colder than the surrounding mantle? Use your understanding of convection to explain why this (hotter or colder) mantle rock would sink.
Below a converging plate boundary on Earth, the mantle rock is sinking. This sinking mantle rock is hotter than the surrounding mantle. The reason why this mantle rock is hotter is that of the convection process.What is convection?Convection is the process of heat transfer by the movement of material.
This movement is a result of the differences in temperature and density within a liquid or gas. The heat transfer occurs as the warmer, less dense material rises while the cooler, denser material sinks. The result is a cycle of movement that causes a transfer of heat from one area to another.What is a converging boundary?A convergent boundary occurs where two tectonic plates collide. When one plate is forced beneath the other, it is known as subduction. As the plate sinks into the mantle, the rock begins to heat up. This is because the mantle gets hotter the deeper you go. Therefore, the sinking mantle rock is hotter than the surrounding mantle. How does convection cause the mantle rock to sink?The mantle rock sinks as a result of convection. As the hotter, less dense rock rises toward the surface, it creates an area of lower pressure beneath it. The cooler, denser rock then sinks to fill the void. This movement causes the sinking of the mantle rock beneath a convergent plate boundary.
For more information on converging plate visit:
brainly.com/question/23845744
#SPJ11
Match the tidal characteristics on the right with the Equilibrium Theory consideration on the right which explains them.
explains why most tides are semidiurnal
[Choose ]
tidal range is greater at perigee and perihelion
[Choose ]
tidal range will be greatest at full and new moon
[Choose]
most tides are semidiurnal
[Choose ]
the tidal period is typically 12 hours and 25 minutes
[Choose ]
the diurnal Inequality
[Choose]
high tide should happen at lunar zenith and nadir. while low tide should coincide with moon rise and moon set
[Choose]
Equilibrium theory considerations help explain the following tidal characteristics:
The explanation for why most tides are semidiurnal is:
Earth's tidal bulges are produced by the gravitational attraction of the Moon and the Sun. As the Earth spins on its axis, two tidal bulges travel around the Earth once every 24 hours, creating two high tides and two low tides each day, with one high tide and one low tide approximately every 12.5 hours. The majority of the Earth's tidal cycles are semi-annual.
The explanation for why the tidal range is greater at perigee and perihelion is: Perigean spring tides happen when the moon is both near its closest approach to Earth (perigee) and in its full or new moon phase. This occurs during the full moon and new moon periods of every month. During perigean spring tides, the tidal range is greater than it is during normal spring tides because the moon is closer to Earth.
The explanation for why the tidal range will be greatest at full and new moons: During full and new moons, the Earth, Moon, and Sun are all in line, creating the greatest gravitational force on the Earth's oceans. This greater gravitational pull causes greater tidal ranges.
The explanations for why the majority of tides are semidiurnal are: The majority of the Earth's tidal cycles are semidiurnal, which means they have two high tides and two low tides each day, with one high tide and one low tide approximately every 12.5 hours. This is caused by the Earth's tidal bulges, which are created by the gravitational attraction of the Moon and the Sun.
The explanation for why the tidal period is typically 12 hours and 25 minutes: The tidal period, or the time between two high tides, is typically 12 hours and 25 minutes due to the time it takes for the Earth to complete one rotation on its axis and the Moon to orbit the Earth.
The explanation for Diurnal Inequality: TDiurnalinequality is a phenomenon that occurs when the tide height between two high tides or two low tides is not the same. This is caused by the geometry of the moon's orbit, which affects the gravitational forces that produce tides.
The explanation for high tides happening at the lunar zenith and nadir while low tides should coincide with moonrise and moonset: When the moon is directly over the equator, it is said to be at the lunar zenith, and this position has a gravitational impact on the Earth's oceans, causing high tides. When the Moon is on the opposite side of the Earth from the zenith, it is said to be at the lunar nadir, and this position also has a gravitational impact on the Earth's oceans, causing high tides. In contrast, when the moon is on the horizon, it has little to no gravitational effect on the Earth's oceans, resulting in low tides.
To know more about Equilibrium theory visit :
https://brainly.com/question/4430933
#SPJ11
Discuss possible causes of climate change support your answer with examples pictures diagrams photos
Climate change is a complex issue with many contributing factors.
Here are some possible causes of climate change.Human activities - Human activities, such as the burning of fossil fuels, are the primary cause of climate change.
When fossil fuels are burned,they release greenhouse gases into the atmosphere.Greenhouse gases trap heat, which causes the Earth's temperature to rise.
Natural causes - Natural causes such as volcanic eruptions and changes in solar activity, can also contribute to climate change. However, the evidence suggests that human activities are the primary cause of the current warming trend.
Learn more about climate change at:
https://brainly.com/question/1789619
#SPJ1
2. a) Classify different types of kerogen based on the origin of organic matter and hydrocarbon shows. [12 marks] b) Describe TWO (2) unconventional oil resources in shale. [10 marks] c) Describe the difference between vertical and lateral migration of hydrocarbon. [4 marks] d) Classify different types of plate margins and the resulting geological process/deformation. [4 marks]
Kerogen can be classified into different types based on the origin of organic matter and hydrocarbon shows. Two unconventional oil resources found in shale are shale oil and tight oil Vertical and lateral migration are two primary modes of hydrocarbon migration.
Kerogen is a solid organic material found in sedimentary rocks and is the precursor to hydrocarbon formation. Type I kerogen, derived from algal and lacustrine (lake) environments, produces mainly oil and gas. Two unconventional oil resources found in shale are tight oil and oil shale. Tight oil refers to oil trapped in low-permeability shale reservoirs, requiring hydraulic fracturing (fracking) to release the oil.This vertical migration occurs due to the pressure difference between the hydrocarbon-rich source rock and the overlying rocks.
Type II kerogen, derived from marine environments with abundant planktonic organisms, generates both oil and gas. Type III kerogen, derived from terrestrial plant matter such as wood and coal, produces primarily gas. Type IV kerogen, derived from inert organic matter like coal and kerogen-rich shales, does not produce significant amounts of hydrocarbons.
Shale oil resources are typically rich in organic matter and have undergone thermal maturation, converting the organic material into oil. Oil shale, on the other hand, refers to sedimentary rocks rich in kerogen, which can be processed through various methods, such as heating or pyrolysis, to extract shale oil.
These unconventional oil resources have gained significance in recent years due to advancements in technology that have made their extraction more economically viable.
The vertical migration of hydrocarbon refers to the movement of hydrocarbons vertically within the subsurface, usually driven by buoyancy. Hydrocarbons tend to migrate upward from source rocks, such as organic-rich shales, towards reservoir rocks that can store and trap the hydrocarbons.
Learn more about unconventional resources here
brainly.com/question/32127222
#SPJ11
the of a planet is the region around the planet where the magnetic field is able to deflect the solar wind and other charged particles.
The magnetosphere of a planet is the region around the planet where the magnetic field is able to deflect the solar wind and other charged particles.
A planet's magnetosphere is the area of space surrounding the planet where its magnetic field interacts with charged particles, such as those carried by the solar wind. The magnetic field of a planet, generated by its core, extends into space and forms a protective shield around the planet. This shield helps to deflect and trap charged particles, preventing them from directly impacting the planet's surface. The magnetosphere plays a crucial role in protecting a planet's atmosphere and surface from the harmful effects of the solar wind.
learn more about:- magnetosphere here
https://brainly.com/question/32215833
#SPJ11