The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option
What is rate law ?A rate law shows how the rate of a chemical reaction depends on reactant concentration.
For a reaction such as aA → products, the rate law generally has the form
rate = k[A]ⁿ,
where,
k is a proportionality constant called the rate constantn is the order of the reaction with respect to A.Typically, increased concentrations of reactants increases the speed of the reaction, because there are more molecules colliding and reacting with each other.
Hence , The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option
Learn more about rate law here ;
https://brainly.com/question/4222261
#SPJ1
How many grams of hydrogen gas are produced from 2.50 mol of water?
__Ca(s) + __H2O(l) → __Ca(OH)2(aq) + __H2(g)
Answer:
2.52 g H₂
Explanation:
To find the mass of hydrogen gas, you need to (1) convert moles H₂O to moles H₂ (via mole-to-mole ratio from reaction coefficient) and then (2) convert moles H₂ to grams H₂ (via molar mass from periodic table values). When multiplying the given value by the mole-to-mole ratio, you need to use the coefficients of the balanced equation. An reaction is balanced once there is an equal amount of each element on both sides.
(Step 1)
The unbalanced equation:
Ca(s) + H₂O(l) ----> Ca(OH)₂(aq) + H₂(g)
Reactants: 1 calcium, 2 hydrogen, 1 oxygen
Products: 1 calcium, 4 hydrogen, 2 oxygen
The balanced equation:
1 Ca(s) + 2 H₂O(l) ----> 1 Ca(OH)₂(aq) + 1 H₂(g)
Reactants: 1 calcium, 4 hydrogen, 2 oxygen
Products: 1 calcium, 4 hydrogen, 2 oxygen
(Step 2)
Molar Mass (H₂): 2(1.008 g/mol)
Molar Mass (H₂): 2.016 g/mol
(Step 3)
2.50 moles H₂O 1 mole H₂ 2.016 g
--------------------------- x ------------------------- x ---------------------- = 2.52 g H₂
2 moles H₂O 1 mole
7. How can it be said that two water molecules represent more entropy than two hydrogen molecules plus
an oxygen molecule?
The reason for this is that water is a polar molecule and one water molecule is attracted to the other by a hydrogen bond.
What is entropy?The term entropy refers to the degree of disorder in a molecule. The more disorderly a molecule is, the higher its entropy.
The fact that water is a polar molecule and one water molecule is attracted to the other by a hydrogen bond thus, two water molecules represent more entropy than two hydrogen molecules plus an oxygen molecule.
Learn more about entropy:https://brainly.com/question/13146879
#SPJ1
light frequency 1.40x10^15 Hz strike a surface causing photoelectrons to leave with a KE of 1.05 eV what is the work function in eV
Answer:
The Work Function is 4.74eV.
Explanation:
The photoelectric effect is a phenomenon in which a beam of light is projected towards a metal plate and this leads to the ejection of electrons from the metal. The minimum amount of energy required for this ejection of electrons is known as the work function. When the energy of the light beam is less than the work function, then the electrons are not emitted.
The photoelectric effect is represented by the equation:
E = φ + KE where
E = energy of the incident photons
KE = kinetic energy of photoelectrons
φ = Work function of the metal
This can also be written in terms of frequency as:
h = h₀ + [tex]\frac{1}{2}[/tex] mv²
= frequency of the incident light beam
₀ = frequency of the photoelectrons
m = mass of the electron
v = velocity of the electron
h = Plank's constant 6.623 x 10⁻³⁴Js
Conversion factor: 1eV = 1.602 x 10⁻¹⁹ J
So, 1.05eV = 1.682 10⁻¹⁹ J
Using the formulas,
(6.623 x 10⁻³⁴Js)(1.40x10¹⁵ s⁻¹) = φ + 1.682 x 10⁻¹⁹ J
(9.272 x 10⁻¹⁹) - (1.682 x 10⁻¹⁹) = φ
φ = 7.590 x 10⁻¹⁹ J = 4.74 eV
Learn more about work function here:
https://brainly.com/question/9757301
#SPJ2
Which of the following best describes a neutralization reaction?
Answer:
A
The H+ from acid and OH- from base forms water, the other parts form the salt.
Which is a property of all bases?
Answer:
can change red litmus to blue litmus
Explanation:
please mark me as brainlest
Question 9 of 10
What is an open system?
OA. A system that allows energy to move in and out but not mass
B. A system that allows energy and mass to move in and out of it
XA
Answer:
The answer is B an open system allows energy and mass to move in and out of it
Hope it helps
Why is there a delay for the tides to react to the Moon's and Sun's gravitational effect?
A. Gravity is one of the slower forces in nature having to travel great distances.
B. The gravitational forces must overcome inertia and friction for the tides to take effect on water.
C. Water is relatively immune to the force of gravity delaying the tidal process.
D. There is no delay because the effects of gravity is constantly acting on bodies of water.
There is no delay because the effects of gravity are constantly acting on bodies of water. Hence, option D is correct.
What is the gravitational effect?Gravitation or just gravity is the force of attraction between any two bodies.
The Moon exerts over twice the gravitational pull of the Sun on Earth's tides because of its proximity to Earth. -The lunar tidal bulges are about twice the size of the solar tidal bulges. -The Sun's contribution to the tides is less than that of the Moon.
When the sun and moon are perfectly unaligned (they form a 90-degree angle relative to the earth), there are still tides because the moon's gravitational gradient is stronger than the sun's. The sun's gravitational gradient never completely cancels out the moon's.
Hence, option D is correct.
Learn more about the gravitational effect here:
https://brainly.com/question/14433868
#SPJ1
A substance decomposes with a rate
constant of 9.05 x 10-4 s¹. How long does
it take for 15.0% of the substance to
decompose?
Answer:
The time required to decompose the substance is 360 seconds.
Need ASAP please and thank you
The empirical formula would be [tex]C_2H_3O_2[/tex] and the molecular formula would be [tex]C_4 H_6 O_4[/tex]
Empirical and molecular formulaFrom the illustration:
C = 40.6 g H = 5.1 g O = 54.2 g
Divide each element by its molar weight:
C = 40.6/12 = 3.4 H = 5.1/1 = 5.1 O = 54.2/16 = 3.4
Divide by the smallest:
C = 3.4/3.4 = 1 H = 5.1/3.4 = 1.5 O = 3.4/3.4 = 1
Thus, the empirical formula is [tex]C_2H_3O_2[/tex]
To find the molecular formula:
[ [tex]C_2H_3O_2[/tex]]n = molecular formula
where n = molar mass/empirical formula mass
Empirical formula mass = 24 + 3 + 32 = 59
n = 118.084/59 = 2
Thus, the molecular formula is [tex]C_4 H_6 O_4[/tex] which is more or less the same as the empirical formula.
More on empirical formula can be found here: https://brainly.com/question/14044066
#SPJ1
The Empirical formula will be C₂H₃O₂ and the Molecular formula would be C₄H₆O₄
What is Empirical and Molecular Formula ?Empirical formula is a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.
Molecular formula is a chemical formula that gives the total number of atoms of each element in each molecule of a substance.
Given ;
C = 40.6 gH = 5.1 gO = 54.2 gDivide each element by its molar weight:
C = 40.6 / 12 = 3.4H = 5.1 / 1 = 5.1 O = 54.2 / 16 = 3.4Divide by the smallest Value:
C = 3.4/3.4 = 1H = 5.1/3.4 = 1.5 O = 3.4/3.4 = 1Thus, the Empirical formula is C₂H₃O₂
Now, to find the molecular formula ;
[C₂H₃O₂ ]n = molecular formula
where n = molar mass / empirical formula mass
Empirical formula mass = 24 + 3 + 32 = 59
n = 118.084 / 59 = 2
[C₂H₃O₂ ]n = molecular formula
[C₂H₃O₂ ]2 = C₄H₆O₄
Thus, the Molecular formula is C₂H₃O₂
Learn More about Empirical formula here ; brainly.com/question/14044066
#SPJ1
Felicity lists the factors that affect the shape of Florida.
Which does not belong in this list?
Answer:
if the Florida inters into the land se hokar gar ke bill Tak jane ke process Florida kahte hai aur bur ka bal se doodh chusne Tak wo Florida s
Humidity, thermometer, and rainfall factors affect the shape of Florida, making the shape different.
What is the shape of Florida?In general, a molecule's electron pairs will take on a structure that maximizes theirs from one another.
Even charges repel one another, whereas dissimilar charges attract H₂O, for instance, containing two pairs of lone electrons but taking on an angular form.
Sand ridges, like the Lake Wales Ridge, were created during dry times from sediments that had been transported by ocean currents and deposited to form islands.
Latitude, land and water distribution, dominant winds, hurricanes, pressure systems, and ocean currents are the main variables that influence Florida's climate.
Therefore, as glaciers retreated throughout cooling cycles, sea levels dropped and Florida occasionally doubled in size.
Learn more about Florida, here:
https://brainly.com/question/12732190
#SPJ2
Calculate the theoretical yield in , grams AlI₃, aluminum iodide, from the complete reaction of 113 grams I₂ according to the following balanced chemical equation: 2Al(s) + 3I₂(s) → 2AlI₃(s)
121 g [tex]AlI_{3}[/tex] aluminum iodide, from the complete reaction of 113 grams I₂ according to the following balanced chemical equation:
2Al(s) + 3I₂(s) → 2[tex]AlI_{3}[/tex]
As per the given balanced equation,
3 moles of [tex]I_{2}[/tex] are used to give 2 moles of [tex]AlI_{3}[/tex].
Atomic weight of iodine is 127 gm/ mole
So, molecular weight of iodine molecule = 254 gm/ mole
There for , we can say that 1 mole o iodine molecule contain 254 g
So ,Given 113 gm iodine contains how many moles?
Moles of iodine = 113/254 = 0.44 moles
from the equation we can say that 3 moles of iodine used to give 2 moles of aluminum iodide.
So, 0.44 moles of iodine gives how many moles of aluminum iodide ?
Moles of aluminum iodide = 0.44 × 2 ÷ 3
= 0.2965 moles
Molecular weight of one mole of aluminum iodide = atomic weight of Al + 3( atomic weight of iodine )
= 408 gm
∴ 1 mole of aluminum iodide = 408 gm
so, 0.2965 moles of aluminum iodide = ?
= 0.2964 × 408
= 121 gm Aluminum iodide formed.
Learn more about moles here...
https://brainly.com/question/1427235
#SPJ10
When 50.0 g iron(III) oxide reacts with carbon monoxide, 32.5 g iron is produced. What is the percent yield of the reaction?
Fe2O3(s)+3CO(g)→2Fe(s)+3CO2(g)
Answer:
92.9%
Explanation:
You have been given the actual yield of the reaction. First, you need to find the theoretical yield of the reaction. To do this, you need to (1) convert grams Fe₂O₃ to moles Fe₂O₃ (via molar mass from periodic table values), then (2) convert moles Fe₂O₃ to moles Fe (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles Fe to grams Fe (via molar mass).
Once you have found the theoretical yield, you need to use the percent yield equation to calculate the final answer. This number should have 3 sig figs to match the given values.
(Step 1)
Molar Mass (Fe₂O₃): 2(55.845 g/mol) + 3(15.998 g/mol)
Molar Mass (Fe₂O₃): 159.684 g/mol
1 Fe₂O₃(s) + 3 CO(g) ---> 2 Fe(s) + 3 CO₂(g)
Molar Mass (Fe): 55.845 g/mol
50.0 g Fe₂O₃ 1 mole 2 moles Fe 55.845 g
-------------------- x ------------------ x --------------------- x ---------------- = 35.0 g Fe
159.684 g 1 mole Fe₂O₃ 1 mole
(Step 2)
Actual Yield
Percent Yield = --------------------------- x 100%
Theoretical Yield
32.5 g Fe
Percent Yield = ---------------------- x 100% = 92.9%
35.0 g Fe
5 Examples of simple salts
What are the noble gas configurations for
-Li
-Na
-K
The noble gas configurations for
Li= [He] 2s¹, Na=[Ne] 3s¹ and K =[Ar] 4s¹.
Noble gas configurations are the term for the electronic configurations of the atoms for which the electronic configuration becomes very larger i.e, for the higher atomic numbers.
For the noble gas electronic configurations, the noble gas, which is before that atom is written.
So, the Lithium can be represented as [He] 2s¹.
So, the Sodium can be represented as [Ne] 3s¹.
So, the Potassium can be represented as [Ar] 4s¹.
Hence, the noble gas configurations for Lithium= [He] 2s¹, Sodium=[Ne] 3s¹ and potassium =[Ar] 4s¹.
Learn more about electronic configurations here:
https://brainly.com/question/14267765
#SPJ10
NH4Cl + AgNO3 → AgCl + NH4NO3
A balloon inflated in a room at 240C
has a volume of 4.00L. The balloon is then
heated to a temperature of 580C. What is
the new volume
Answer:
4.458 L
Explanation:
Assuming the pressure remains constant and assuming 24° C and 58° C
V1/T1 = V2/T2 Where T is in Kelvin
V1/T1 * T2 = V2
4 / ( 273.15 +24) * ( 273.15 + 58) = 4.458 L
➪ State the difference between molarity(M) and molality (m) ?
[tex]\sf{}[/tex]
⛄
What are the blue and yellow circles, the red circles, and the darkest blue ?
Answer:
The Red Circles: Liquid, Blue and Yellow Circles: Solid, and Purple Circles: Gas
Explanation:
Should be it based on the picture and given information.
How do models help scientists predict the polarity of molecules?
This is from the Molecular Structure Lab Report: Determining Polarity
In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.
What is molecular polarity?Molecular polarity refers to the unequal distribution of electrical charges in the atoms of a molecule.
This unequal distribution leads to the generation of molecular poles (positive and negative) at the ends of the chemical bonds.
In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.
Learn more about molecular poles here:
https://brainly.com/question/18649956
#SPJ1
In what way does ocean water move globally?
A. Along warm-water currents from warmer regions to colder regions
B. Along cold-water currents from the equator to the Poles
C. Along cold-water currents from warmer regions to colder regions
D. Along longshore currents from the equator to the Poles.
Answer:
A. Along warm-water currents from warmer regions to colder regions
\
Explanation:
Acid rain is caused by which of the following?
excess carbon dioxide
deforestation
nitrogen compounds in the soil
nitrogen compounds in the air
Answer:
nitrogen compounds in the air
Explanation:
Match the action to the effect on the equilibrium position for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g). (3 points)
1.
Adding hydrogen gas
2.
Adding a catalyst
3.
Decreasing the pressure
a.
Shift to the left
b.
Shift to the right
c.
No effect
Answer:
1. Adding hydrogen gas, b. shift to the right
2. Adding a catalyst, c. No effect
3. Decreasing the pressure, a. shift to the left
Explanation:
Hydrogen gas can be rewritten as H2. Whenever you add something to an equilibrium expression, it will shift to whichever side does not have this. So, since the reactant side has 3 moles of H2, adding more H2 to the reaction will shift to the products side, since there is no H2 there.
Adding a catalyst has no effect on equilibrium reactions.
When decreasing the pressure, equilibrium will shift to the side with the greater number of moles of gas. In this case, there are 4 moles of gas on the left, and 2 on the right, so it would shift to the left.
- How many grams are in 1.4 x 10¹5 atoms of calcium?
Answer:
40 g= 6.022×10²³
x=1.4×10¹⁵
x=40g×6.022×10²³/1.4×10¹⁵
x=17.77×10⁸
Coffe is a solution of organic substance in water
Answer:
Verdadero!
no se en que mas quieres que te ayude? o cual realmente quieres que sea la respuesta?
Part E
From the observations of the simulation, which strategy was most effective for quickly and efficiently producing ammonia? Why do you think this strategy is most effective?
The production of ammonia will be favored at high pressure and low temperature.
What is an exothermic reaction?The term exothermic reaction has to do with a reaction in which the forward reaction is favored at lower temperatures.
Now looking at the reaction coordinate and the equation of the reaction, we know that the production of ammonia will be favored at high pressure and low temperature.
Learn more about ammonia:https://brainly.com/question/12276882
#SPJ1
What is the pH of 0.0025M H2SO4
Answer:
pH=2.3
Explanation:
One H2SO4 molecule produce two H+ ions.
So conc. of H+ = 2(0.0025)
=0.005
Now, pH=-log (conc. of H+)
=-log(0.005)
=2.3
Pyroxene and Olivine are two minerals formed by the cooling of lava, whereas quartz and feldspar are formed as magma cools.
a. Based on the way they form, which two minerals will be comparatively bigger in size?
b. Why? Provide scientific evidence to support your answer
Quartz and Feldspar will be comparatively larger in size since they are formed from cooling of magma while Pyroxene and Olivine are formed by the cooling of lava.
What is the difference between magma and Lava?Magma is molten rock that is found deep within the earth's crust whereas Lava is molten rocks that comes up and flows on the earth's surface.
Minerals formed from magma and lava have comparatively different sizes.
Minerals formed from magma are larger in size than minerals formed from Lava. This is because minerals formed from magma undergo slower cooling, and thus, have a longer time to grow in size. However, minerals formed from lava have a relatively shorter cooling time and do not grow into very large sizes.
Therefore, Quartz and Feldspar will be comparatively larger in size since they are formed from cooling of magma while Pyroxene and Olivine are formed by the cooling of lava.
Learn more about magma and lava at: https://brainly.com/question/14886424
#SPJ1
Calculate how many grams of the product form when 16.7 g of calcium metal completely reacts. Assume that there is more than enough of the chlorine gas.
Ca(s) + Cl2(g) → CaCl2(s)
39.96 g product form when 16.7 g of calcium metal completely reacts.
What is the stoichiometric process?Stoichiometry is a section of chemistry that involves using relationships between reactants and/or products in a chemical reaction to determine desired quantitative data.
Equation:
[tex]Ca(s) + Cl_2(g)[/tex] → [tex]CaCl_2(s)[/tex]
In this case, for the undergoing reaction, we can compute the grams of the formed calcium chloride by noticing the 1:1 molar ratio between calcium and it (stoichiometric coefficients) and using their molar mass of 40 g/mol and 111 g/mol by using the following stoichiometric process:
[tex]m_{ca_C_l_2}[/tex]= 16.7 g Ca x [tex]\frac{1 mol \;of \;Ca}{40g Ca}[/tex] x [tex]\frac{1 mol \;of \;CaCl_2}{1 mol \;Ca}[/tex] x [tex]\frac{111g of \;CaCl_2}{1 mol \;CaCl_2}[/tex]
[tex]m_{ca_C_l_2}[/tex] = 39.96 g
Hence, 39.96 g product form when 16.7 g of calcium metal completely reacts.
Learn more about the stoichiometric process here:
https://brainly.com/question/15047541
#SPJ1
Preparation of ammonia gas
Answer:
Ammonia is easily made in the laboratory by heating an ammonium salt, such as ammonium chloride NH4Cl with a strong alkali, such as sodium hydroxide or calcium hydroxide.
The gas may also be made by warming concentrated ammonium hydroxide.
Explanation:
2NH4Cl + Ca(OH)2 → CaCl2 + 2H2O + 2NH3(g)
Question 3:
The force of gravity between a planet and its moon is 371 N. If the planet has a mass of 4 x 1022 kg and the moon has a mass of 5 x 105 kg, what is the distance between their centers?
Answer:
=6×10^7metre
Explanation:
By using formula,
F=GMm/d^2