What happens during nuclear fission?
Answers
Answer:
During nuclear fission, a neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation. More neutrons are also released when a uranium atom splits. These neutrons continue to collide with other uranium atoms, and the process repeats itself over and over again.
Explanation:
In nuclear fission the nucleus of an atom breaks up into two lighter nuclei. The process may take place spontaneously in some cases or may be induced by the excitation of the nucleus with a variety of particles (e.g., neutrons, protons, deuterons, or alpha particles) or with electromagnetic radiation in the form of gamma rays. In the fission process, a large quantity of energy is released, radioactive products are formed, and several neutrons are emitted. These neutrons can induce fission in a nearby nucleus of fissionable material and release more neutrons that can repeat the sequence, causing a chain reaction in which a large number of nuclei undergo fission and an enormous amount of energy is released. If controlled in a nuclear reactor, such a chain reaction can provide power for society’s benefit. If uncontrolled, as in the case of the so-called atomic bomb, it can lead to an explosion of awesome destructive force.
Answer:
In nuclear fission, atoms are split apart, which releases energy. All nuclear power plants use nuclear fission, and most nuclear power plants use uranium atoms. During nuclear fission, a neutron collides with a uranium atom and splits it, releasing a large amount of energy in the form of heat and radiation.
Related Questions
When you see a figure, how do you know that it's representing a vector?
Answers
The way you will know that a figure represents a vector is that it will have magnitude and direction.
How to Identify a Vector?A figure that is a vector will typically have magnitude and direction. This means that it will be represented by an arrow(s) with its' magnitude also showing.
Whereas, on the opposite side, the figure is termed as a scalar if it doesn’t have a direction.
Thus, we can know a vector diagram if the magnitude and direction are indicated.
Read more about Vectors at; https://brainly.com/question/3184914
#SPJ12
A plane is coming in to taxi at an airport. It lands parallel to the surface at 480m/s and takes exactly one minute to come to a complete stop. What is its acceleration?
Answers
The acceleration of the plane will be −8 m/s²
How to find the acceleration of a plane?
Acceleration is the rate of change in velocity over time (Δv/t).
Given, that the initial velocity of the plane u=480 m/s
The final velocity of the plane is zero after landing, v= 0 m/s
t= 1 minute= 60 seconds
we know, v=u + at
0= 480 + 60a
a=[tex]\frac{-480}{60}[/tex] = -8m/s²
Thus, the acceleration of the plane is -8 m/s²
(negative acceleration implies that the object is slowing down)
To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ10
a car accelerates from rest to 80 m/s in 20 s. what is the card acceleration?
Answers
Answer:
4 m/s²
Explanation:
v = v₀ + at
80 = 0 + 20a
80 = 20a
a = 4 m/s²
Friction is a ____________ force
a. Artificial
b. Natural
c. Pessimistic
d. Negative
Answers
Answer:
natural is the answer
Friction is a natural force which exist
Which of the following is an example of an electromagnetic wave?
Sound
Ocean waves
Seismic waves
Red light
Answers
Answer:
red light light is an electromagnetic wave thats whyy
hope it helped
Explanation:
When in contact with hydrochloric acid, which mineral gives off bubbles of carbon dioxide gas?.
Answers
Answer:
calcite
Explanation:
which degree is best for science student?
Answers
Answer:
Computer Science or Science technology
Explanation:
It all depends on what aspect of science you're looking into such as biology, zoology, marine biology, etc. But since this world is evolving more and more around technology, your best bet is to get into something computer science or science technology.
A single-instance deployment of splunk enterprise handles:
Answers
A single-instance deployment of splunk enterprise handles; Indexing, Parsing, Input and Searching.
What is splunk enterprise?Splunk Enterprise collects data from any source, including metrics, logs, stream network traffic, web servers, custom applications, social media and cloud services.
Functions of single-instance deployment of splunk enterpriseThe following are the main functions;
IndexingParsingInputSearchingLearn more about splunk enterprise here: https://brainly.com/question/10467381
#SPJ12
A circuit consists of three resistors and a 3.50 V battery. Two of the resistors have known resistances of 5 Ω and 10 Ω respectively. The third resistor has an unknown resistance. When the battery is connected to the circuit, the current running through the battery is measured to be 10 A.
a. Calculate the resistance of the unknown resistor.
b. Draw the circuit and label each component.
Answers
The resistance of the unknown resistor is determined as 0.39 ohms.
Equivalent resistance of the circuitThe total resistance of the circuit is calculated as follows;
V = IR
R = V/I
R = (3.5)/10
R = 0.35 ohms
The resistors are in parallel arrangement
1/R = 1/R₁ + 1/R₂ + 1/R₃
1/0.35 = 1/5 + 1/10 + 1/R₃
100/35 = 3/10 + 1/R₃
20/7 = 3/10 + 1/R₃
1/R₃ = 20/7 - 3/10
1/R₃ = (200 - 21)/70
1/R₃ = 179/70
R₃ = 70/179
R₃ = 0.39 ohms
Learn more about parallel resistors here: https://brainly.com/question/24155667
#SPJ1
The table describes the properties of four compounds.
Which compounds are most likely ionic?
Answers
3. in adlerian therapy, clients learn how core beliefs that have been helpful in the past might not work well now and then to put that understanding to use in the real world. what therapeutic process is referred to jim to overcome his core beliefs and move forward? as a counselor, how do you make him understand?
Answers
Adlerian therapy is a method in which a therapist collaborates with a client to pinpoint challenges and develop successful solutions for achieving their objectives.
Key Takeaways: Adlerian Therapy
Individual therapy, often known as Adlerian therapy, places an emphasis on the patient's capacity to effect good change in his or her own life.
Adlerian therapy consists of four stages: engagement, assessment, insight, and reorientation.
In Adler’s theory, individuals work to overcome feelings of inferiority and to act in ways that benefit the social interest.
Four Stages of Adlerian Therapy :
Engagement
Assessment
Insight
Reorientation
To learn more about Adlerian Therapy refer : https://brainly.com/question/11722417
#SPJ4
Differences between freezing point and melting point (Atleast 5 differences)
Answers
Answer:
What is freezing point?
A liquid's freezing point is determined at which it turns into a solid. Corresponding to the melting point, the freezing point often rises with increasing pressure. In the case of combinations and for some organic substances, such as lipids, the freezing point is lower than the melting point. The first solid which develops when a combination freezes often differs in composition from the liquid, and the development of the solid alters the composition of the remaining liquid, typically lowering the freezing point gradually. Utilizing successive melting and freezing to gradually separate the components, this approach is used to purify mixtures.
What is melting point?
The temperature at which a purified substance's solid and liquid phases may coexist in equilibrium is referred to as the melting point. A solid's temperature goes up when heat is added to it until the melting point is achieved. The solid will then turn into a liquid with further heating without changing temperature. Additional heat will raise the temperature of the liquid once all of the solid has melted. It is possible to recognize pure compounds and elements by their distinctive melting temperature, which is a characteristic number.
The difference between freezing point and melting point:
While a substance's melting point develops when it transforms from a solid to a liquid, a substance's freezing point happens when a liquid transforms into a solid when the heat from the substance is removed.When the temperature rises, the melting point can be seen, and when the temperature falls, the freezing point can be seen.When a solid reaches its melting point, its volume increases; meanwhile, when a liquid reaches its freezing point, its volume decreases.While a substance's freezing point is not thought of as a distinctive attribute, its melting point is.While external pressure is a significant component in freezing point, atmospheric pressure is a significant element in melting point.Heat must be supplied from an outside source in order to reach the melting point for such a state shift. When a material is at its freezing point, heat is needed to remove it from the substance in order to alter its condition.Reference: Berry, R. Stephen. "When the melting and freezing points are not the same." Scientific American 263.2 (1990): 68-75.
9. Ripening is a _______________ and spoiling is a ______________.
A. Physical reaction, chemical reaction.
B. Physical reaction, physical reaction.
C. Chemical reaction, physical reaction.
D. Chemical reaction, chemical reaction.
Answers
Answer:
C
Explanation:
Chemical reaction,physical
hello i need help with this!!
Answers
Answer:
Yes
Explanation:
If lamp A burnt out there would still be a wire above it that connects lamp B and C to the power source
Now, let's look at how the distance from the charge affects the magnitude of the electric field. Select Values on the menu, and then click and drag one of the yellow E-Field Sensors. You will see the magnitude of the electric field given in units of V/m (volts per meter, which is the same as newtons per coulomb). Place the E-Field Sensor 1 m away from the positive charge (1 m is two bold grid lines away if going in a horizontal or vertical direction), and look at the resulting field strength. Consider the locations to the right, left, above, and below the positive charge, all 1 m away. For these four locations, the magnitude of the electric field is________________. the same. greatest to the left of the charge. greatest below the charge. greatest to the right of the charge. greatest above the charge.
Answers
Electric field strength decreases as the distance from the source increases.
How the distance from the charge affects the magnitude of the electric field?The strength of an electric field is inversely related to square of the distance from the source. This means that the electric field strength decreases when the distance from the source increases.
So we can conclude that Electric field strength decreases as the distance from the source increases.
Learn more about source here: https://brainly.com/question/25578076
#SPJ12
How are step-up transformers used in the transmission of electrical energy?
How are step-up transformers used in the transmission of electrical energy?
They increase the voltage for efficient long-distance transmission.
They decrease the voltage before it leaves a power plant.
They increase the current for efficient long-distance transmission.
They increase the voltage and the current for a short-distance transmission.
Answers
The step-up transformers are used in the transmission of electrical energy in the way they increase the voltage for efficient long-distance transmission.
What is transformer?
A transformer transfers electric energy from one AC circuit to one or more other circuits, either stepping up or stepping down the voltage.
In step up transformers, the voltage are increased from low to high. Step ups are used of long distance transmission In step down transformers, the voltage is decreased from high to low based on the purpose.
Thus, they increase the voltage for efficient long-distance transmission.
Learn more about transformer.
https://brainly.com/question/15200241
#SPJ1
when you rub neutral objects
Answers
electrons can be knocked loose from one object and picked up by the other. The object that gains electrons becomes negatively charged, while the object that loses electrons becomes positively charged.
b gained electrons
A lab technician needs to clean medical instruments that have been exposed to bacteria. which electromagnetic wave would be most useful for this task? infrared radio ultraviolet microwave
Answers
The ultraviolet electromagnetic wave would be most useful for this task.
UV radiation is a well-known method for repressing bacteria that has certain advantages over liquid disinfectants because it may be used to clean surfaces, liquids, the air, and rooms while also operating autonomously and remotely.The disinfection of surface DNA, RNA, and bacteria is accomplished with UV light. Up to 99 percent of surface contamination is removed from research tools, containers, and other items using the UV Clave chamber's highly targeted UV irradiation. Medical instruments that are exposed to bacteria should be cleaned with UV light to remove the bacteria.Microbes are killed or made inactive by UV-C radiation by destroying their deoxyribonucleic acid (DNA).infrared microwave and radio waves will not be effective in removing the contamination and bacteria.
learn more about Ultraviolet waves here:
https://brainly.com/question/1377878
#SPJ10
Answer: Ultraviolet
Explanation: got it right on edge
Water flows through a pipe. The diameter of the pipe at point b is larger than at point a. Where is the water pressure greatest?.
Answers
The water pressure is greatest at point B which has a larger diameter in this scenario.
What is Pressure?This is defined as the force per unit area of a substance with its unit being Pascal.
The larger diameter will have more force acting on the sides which translates to a greater pressure.
Read more about Pressure here https://brainly.com/question/25736513
#SPJ1
A cylindrical metal bar of diameter 14cm and length 484 cm is to be melted to make a metalic cube.if one side of the box is 220mm,how many boxes were produced?
Answers
The number of boxes were produced willl be 7.57.n stands for the no of boxes.
What is volume?The term “volume” refers to the amount of three-dimensional space taken up by an item or a closed surface. It is denoted by V and its SI unit is in cubic cm.
The volume of the cylindrical metal bar;
V₁=πr²h
V₁=3.4 × 7² × 484 cm
V₁=80,634.4 cm³
The one side of the box is,220mm(22 cm)
V₂ = a³
V₂ = (22)³
V₂ = 10,648 cm³
The no of boxes is found as;
n = V₁/V₂
n=80,634.4 cm³/10,648 cm³
n=7.57
Hence, the number of boxes were produced willl be 7.57
To learn more about the volume, refer to https://brainly.com/question/1578538
#SPJ2
someone help real quick please
On one run along a measured distance of 200 m, the bicycle's speed is 40 m/s.
(a) Calculate the time taken by the bicycle to travel this distance.
(b) State the formula you use and show your working.
Answers
Answer:
5 sec
Explanation:
The formula for speed is distance/time taken. so if we use cross multiplication we get distance = speed x time taken. And to get rid of speed we divide both equations by speed like this distance = speed x time taken
speed speed
We cancel out speed by speed and we get this formula to calculate time.
time taken = distance
speed
Now we got the formula we need so we substitute them by their values.
time taken = 200m
40m/s
We cancel meter by meter and divide 200 by 40 and the answer will be 5 seconds. please give me like, thank me and make my answer the brainliest.
A car of mass 750 kg accelerates away from traffic lights. At the end of the first 100 m it has reached a speed
of 12 m/s. During this time, its engine provides an average forward force of 780 N, and the average force of
friction on the car is 240 N.
a Calculate the work done on the car by the force of its engine.
b Calculate the work done on the car by the force of friction.
c Using ke. = mv2, calculate the increase in the car's kinetic energy at the end of the first 100 m.
d Explain whether your answers are consistent with the principle of conservation of energy.
Answers
the work done on the car by the force of its engine is 78,000 J.
" The work done on the car by the force of friction is 24,000 J.
Increasing the car's kinetic energy at the end of the first 100 m is 54,000J
a. Completed work = force x distance. Engine output = 780 N, that is,
780 N x 100 m = 78,000 J.
b. Completed work = force x distance. Friction force = 240 N, that is,
240 N x 100 m = 24,000 J.
c. Kinetic energy = 1 \ 2 x m x v2
= 1 \ 2 x 750 kg x 12 squared = 375 x 144 = 54,000 J.
How powerful is the engine of a car?Mainstream car and truck engines typically produce 100-400 pounds. -Torque feet. This torque is generated by the engine piston as it moves up and down on the engine crankshaft, causing the engine to rotate (or twist) continuously.
Learn more about work done here: https://brainly.com/question/25573309
#SPJ10
which type of radio active decays
Answers
forces if magnitude 2,5 and 4 units lie in the direction 45°,90° and 135° respectively. Find: A. the magnitude. B. the direction of their resultant
Answers
A. The magnitude is 9.47N
B. The direction of the resultant force is 90°
We use vectors in answering this question.
F₁ = 2N 45°
F₂ = 5N 90°
F₃ = 4N. 135°
For the magnitude, we use vector addition twice
Consider forces F₁ and F₃
Notice that F₁ and F₃ are at right angles to each otherUsing vector summation, the net forces of F₁ and F₃ say F₀ is the square root of the summation of the squares of F₁ and F₃F₀ = 4.47N
Since F₁ and F₃ are at 45° and 135° respectively, their net force F₀ is at 90°, along the line of F₂
Fnet = F₀ + F₂ = 4.47 + 5 = 9.47N
A. The magnitude is 9.47N
B. The direction of the resultant force is 90°
Learn more about vectors here:
https://brainly.com/question/18660017
#SPJ10
An electric motor rated 2.5kw is used to lift bales of hay to a store in a dairy farm. A single bale has a mass of 5kg. If the store is 4 meters above the ground, how many bales can the motor raise in 2 minutes.
Answers
help pleaaase!!
A train leaves the station from rest and travels along a straight track. if the train is 500 meters from the station when it reaches a velocity of 50m/s what is the acceleration of the train?
Answers
Answer:
[tex]2.5m/s^{2}[/tex]
Explanation:
Since the distance ,s = 500m
Initial velocity, u = 0m/s
Final velocity, v = 50m/s
We can one of the kinematics equations to find the acceleration.
[tex]v^{2} =u^{2} +2as\\50^{2} =0^{2} + 2a(500)\\2500 = 0 + 1000a\\1000a = 2500\\a = \frac{2500}{1000} \\= 2.5m/s^{2}[/tex]
Answer:
S=D÷T
Explanation:
50=0.5÷T
T= 100
What is the difference between a conductor and an insulator?
Select one:
O a. An insulator transfers thermal energy while a conductor does not. Insulators do not
allow thermal energy to move through them.
Ob.
A conductor transfers thermal energy while an insulator does not.
O c.
Both conductors and insulators transfer thermal energy, but not electrical energy.
One of them does not transfer energy.
O d. Both conductors and insulators transfer electrical energy, but not thermal energy.
Answers
Answer:
b
Explanation:
An insulator does not transfer thermal or electrical energy but a conductor does
Five resistors each have resistance R. Three of the resistors are connected in series and this combination is then connected in parallel with the two other resistors which have been connected in series with each other. What is the equivalent resistance for this arrangement
Answers
Answer:
6/5 * R
Explanation:
The 3 in series sum to 3R for one branch of the parallel circuit
the 2 in series sum to 2R for the other side of the parallel circuit
now find the equivalent R of the parallel circuit with 3R and 2R
here is one way
Requiv = 1 / ( 1/(3R) + 1/(2R) ) =
1/ ( 5/(6R) ) =
6R/5
the equiv resistance = 6/5 * R
Particles q1 = +8.0 uC, q2 = +3.5 uC, and
93 = -2.5 uC are in a line. Particles q1 and q2 are
separated by 0.10 m and particles q2 and q3 are
separated by 0.15 m. What is the net force on
particle q2?
Answers
Answer:
11.1845088571 N
Explanation:
F = k(q1q2)/(d^2)
is vectors and motion in plane same?
Answers
Answer:
Plane Motion
Plane Motion One of the most common examples of motion in a plane is Projectile motion.