Answer:
Well to start, as fragile as the eggs are, there should be a more durable material you feel me? Like maybe try something such as a rubbery product but one that isn't so tough on outside but not too soft on the inside. Basically a cushion but where is accessible for the eggs. We also dont want a material that is way to hard because it leaves no room for the eggs and its a very difficult workspace.
Explanation:
Hope this helps and good luck on your project :)
Reactivity of a_______ depends on how easily an electron(e-) can be removed. (This is lonization energy)
Answer:
1. How is ionization energy related to how easily an electron can be lost from an atom? The easier it is to lose an electron the smaller the amount of energy needed to remove it (smaller ionization energy). ... The amount of positive charge increases as the number of protons increase from left to right across a period.
Explanation:
The atomic mass in Phosphorus is a decimal because __________. Neutrons aren't always the same mass. It is charged. proton number varies. It is the average mass of all phosphorus elements in nature.
Answer:
"It is the average mass of all phosphorus elements in nature."
Explanation:
I don't really know why, I just got it right on this quiz with this answer. Hope it helps :)
if 22.0 aluminum chloride is added to 26.0 g of silver nitrate, how many g of that solid product is expected to form
Answer:
21.95 g of AgCl.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
AlCl3(aq) + 3AgNO3(aq) —> 3AgCl(s) + Al(NO3)3(aq)
Next, we shall determine the masses of AlCl3 and AgNO3 that reacted and the mass of AgCl produced from the balanced equation. This is illustrated below:
Molar mass of AlCl3 = 27 + (3×35.5) = 133.5 g/mol
Mass of AlCl3 from the balanced equation = 1 × 133.5 = 133.5 g
Molar mass of AgNO3 = 108 + 14 + (3×16) = 170 g/mol
Mass of AgNO3 from the balanced equation = 3 × 170 = 510 g
Molar mass of AgCl = 108 + 35.5 = 143.5 g/mol
Mass of AgCl from the balanced equation = 3 × 143.5 = 430.5 g
From the balanced equation above,
133.5 g of AlCl3 reacted with 510 g of AgNO3 to produce 430.5 g of AgCl.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
133.5 g of AlCl3 reacted with 510 g of AgNO3.
Therefore,
22 g of AlCl3 will react with =
(22 × 510)/133.5 = 84.04 g of AgNO3.
Thus, we can see that it will require a higher mass (i.e 84.04 g) of AgNO3 than what was given (i.e 26 g) to react completely with 22 g of AlCl3. Therefore, AgNO3 is the limiting reactant and AlCl3 is the excess reactant.
Finally, we shall determine the mass of the solid product (AgCl) produced from the reaction.
In this case the limiting reactant will be used because, it will produce the maximum yield of the reaction since all of it is used up in the reaction.
The limiting reactant is AgNO3 and the mass of AgCl produced can be obtained as follow:
From the balanced equation above,
510 g of AgNO3 reacted to produce 430.5 g of AgCl.
Therefore, 26 g of AgNO3 will react to produce = (26 × 430.5)/510 = 21.95 g of AgCl.
Thus, the mass of the solid product (AgCl) produced is 21.95 g
In the titration of a monoprotic acid with a monoprotic base, the point at which the same number of moles of acid and base have been added is called the ______________.
Answer:
The correct approach is "Equivalence point ".
Explanation:
The equivalence point seems to be the exact or actual point at which the chemical compound stops in a combination of titrations. Titration is also conducted to assess a substance's concentration in something like a solution. We would have to utilize a titrant with either a standard solution and can interfere with either the product unless the substance remains established or recognized.Joshua has learned that the human body is made up of many body systems that work together to function for life which of the following does not provide an example of two human body systems working together A heart pumps oxygen-rich blood from the lungs to the body B storing waste products for later illumination C  shivering in response to sensing cold D hormones are released into the bloodstream
Answer:
Explanation:B storing waste materials
I miss school for personal reasons and now im back and i don’t understand anything please help i dont want to fail
Answer:
E = 2.80×10⁻¹⁶ j
E = 5.37×10⁻¹⁷j
Explanation:
Given data:
Frequency of photon = 4.23 ×10¹⁷ Hz
Energy of photon = ?
Solution:
Formula:
E = h× f
E = 6.63×10⁻³⁴ js ×4.23 ×10¹⁷ Hz
Hz = s⁻¹
E = 28.0×10⁻¹⁷ j
E = 2.80×10⁻¹⁶ j
2)
Given data:
Frequency of photon = 8.10×10¹⁶ Hz
Energy of photon = ?
Solution:
E = h× f
E = 6.63×10⁻³⁴ js × 8.10×10¹⁶ Hz
Hz = s⁻¹
E = 53.7×10⁻¹⁸j
E = 5.37×10⁻¹⁷j
Which of these choices is true about any map that shows the entire world?
Multiple Choice | 1.00pts
Land is always brown, and the ocean is always blue.
Lines of latitude and longitude are always perpendicular.
Some distortion exists somewhere in the map.
The map is always rectangular.
Answer:
Some distortion exists somewhere in the map.
Explanation:
Any map that shows the entire world will have some distortion somewhere in the map. This is because we are transforming a spherical body to a flat rectangular dimensional surface.
The earth is a 3-dimensional body and a map, is usually 2-dimensionalShapes are usually distorted in order to accommodate this transposition. Some continents will appear smaller or bigger than expected. The nature of the projection used will determine the inherent distortion.A 200. g piece of metal is boiled in ethanol for 3 minutes and then transferred to a styrofoam cup containing 250. mL of water at 23 C. The metal and water are allowed to come to thermal equilibrium at a temperature of 27.5 C. If ethanol boils at a temperature of 78 C:
a. What is the delta T for the metal
b. What is the delta T for the water
c. what is the specific heat capacity for the unknown metal?
ΔT for the metal = 50.5 °C
ΔT for the water = 4.5 °C
The specific heat capacity for the unknown metal : 0.466 J/g° C
Further explanationThe law of conservation of energy can be applied to heat changes, i.e. the heat received/absorbed is the same as the heat released
Q in = Q out
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
A 200. g piece of metal is boiled in ethanol (boiling point: 78 C), so :
m metal = 200 g
Ti metal(initial temperature of metal)=78 C
T(system temperature at equilibrium)=27.5
m water = 250 ml x 1 g/ml = 250 g
c water = 4.18 joules / g ° C
Tiw(initial temperature of water) = 23
a. ΔT metal[tex]\tt 78-27.5=50.5^oC[/tex]
b. ΔT water[tex]\tt 27.5-23=4.5^oC[/tex]
c. the specific heat capacity for the unknown metal[tex]\tt Q~metal=Q~water\\\\200\times c\times (78-27.5)=250\times 4.18\times (27.5-23)\\\\10100\times c=4702.5\\\\c=0.466~J/g^oC[/tex]
Write a balanced half-reaction for the reduction of solid manganese dioxide MnO2 to manganese ion Mn 2 in acidic aqueous solution. Be sure to add physical state symbols where appropriate.
Answer:
2 e⁻ + 4 H⁺(aq) + MnO₂(s) → Mn²⁺(aq) + 2 H₂O(l)
Explanation:
Let's write the half-reaction for the reduction of solid manganese dioxide MnO₂ to manganese ion Mn²⁺ in acidic aqueous solution.
MnO₂(s) → Mn²⁺(aq)
To balance the oxygen atoms, we will add 2 moles of water on the right side. To compensate for the hydrogen atoms added, we will add 4 hydrogen ions on the left side.
4 H⁺(aq) + MnO₂(s) → Mn²⁺(aq) + 2 H₂O(l)
Finally, we will balance the charges by adding 2 electrons on the left side.
2 e⁻ + 4 H⁺(aq) + MnO₂(s) → Mn²⁺(aq) + 2 H₂O(l)
What are the major characteristics of metals
which two body systems work together to deliever oxygen to the cells
Answer:
circulatory and respiratory
Explanation:
your welcome :)
What kind of bond would two nonmetals typically make?
A. An ionic bond
B. A covalent bond
C. A metallic bond
D. An ionic solid
Answer:
covalent bond
Explanation:
g Determine the percent enantiomeric excess of a sample with specific rotation of 14 compared to an enantiomerically pure reference stereoisomer of the sample that has specific rotation -24
Answer:
Explanation:
Enantiomeric excess of this compound X is given by the formula
EE= Observed specific rotation*100 / maximum specific rotation
EE= 14*100/24 = 58.33%
Percentage enantiomeric excess
%(-) = EE/2 +50
= 58.33/2 + 50
= 79.12% OF (-)X and 20.88% of (+) X
The density of Germanium is 5.32 g/cm. You
measure out 37.72 g. What is its volume?
Correct units and significant figures must be
included for full credit.
please help
Answer:
7.09 cm³
Explanation:
From the question given above, the following data were obtained:
Density of Germanium = 5.32 g/cm³
Mass of Germanium = 37.72 g
Volume of Germanium =?
The density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically it is expressed as:
Density = mass / volume
Thus, with the above formula, we can obtain the volume of Germanium as shown below:
Density of Germanium = 5.32 g/cm³
Mass of Germanium = 37.72 g
Volume of Germanium =?
Density = mass /volume
5.32 = 37.72 / volume
Cross multiply
5.32 × Volume = 37.72
Divide both side by 5.32
Volume = 37.72 / 5.32
Volume of Germanium = 7.09 cm³
A sample has a nitrate concentration of 4.39 mg/L (4.39 ppm nitrate). Calculate its molar concentration (in moles/L). (This primarily involves unit conversions).
Answer:
[tex]0.0000708\ \text{mol/L}[/tex]
Explanation:
The nitrate concentration of the sample = [tex]4.39\ \text{mg/L}=4.39\times 10^{-3}\ \text{g/L}[/tex]
Molar mass of [tex]NO^-_3=62.0049\ \text{g/mol}[/tex]
The molar concentration is obtained when we divide the concentration by its molar mass in the approriate units.
[tex]\dfrac{4.39\times 10^{-3}}{62.0049}=0.0000708\ \text{mol/L}[/tex]
The molar concentration is [tex]0.0000708\ \text{mol/L}[/tex]
what is the same about map view and cross section
Answer:
(a) Map view and (b) cross-section view of location results for lower and upper groups overlapping with faults. Green dashed lines, magenta dots and blue dots refer to preexisting faults, lower events and upper events, respectively. (For interpretation of the references to color in this figure legend, the reader is referred to the web version of this article.)
(a) Map view and (b) cross-section view of location results for lower and upper groups overlapping with faults. Green dashed lines, magenta dots and blue dots refer to preexisting faults, lower events and upper events, respectively. (For interpretation of the references to color in this figure legend, the reader is referred to the web version of this article.)
When 0.627 g of biphenyl (CH) combusts in a bomb calorimeter, the temperature rises from 21.9 C to 26.6 C. What is U for the reaction in kJ/mol biphenyl
Answer:
[tex]U=-6852\frac{kJ}{mol}[/tex]
Explanation:
Hello there!
In this case, since the heat capacity of the bomb calorimeter, we can use this found value on ethernet: 5.86 kJ/°C, thus, we can compute the heat gained by the calorimeter:
[tex]Q_{calorimeter}=C\Delta T=5.86kJ/\°C*(26.6-21.9)\°C=27.54kJ[/tex]
Thus, since the heat gained by the calorimeter is actually the heat released due to the combustion of byphenyl, we compute it as the negative of that of the calorimeter:
[tex]Q_{combustion}=-Q_{calorimeter}=-27.54kJ[/tex]
Finally the energy of reaction, U, in kJ/mol for the combustion of byphenyl (molar mass = 154 g/mol) is:
[tex]U=\frac{-27.54kJ}{0.627g*\frac{1mol}{156g} } \\\\U=-6852\frac{kJ}{mol}[/tex]
Best regards!
NiCl2 —> Ni + Cl2
What is the type of reaction? Also the reactants and products?
Match the scientist with his discovery or contribution.
Match Term Definition
J. J. Thomson A) Electrons
John Dalton B) Atoms
Ernest Rutherford C) Neutrons
James Chadwick D) Protons
Answer:
J. J. Thomson - Electrons
John Dalton - Atoms
Ernest Rutherford - Protons
James Chadwick - Neutrons
Answer:
Look at the picture :)
Squalene, an important intermediate in the biosynthesis of steroids, has the molecular formula C30H50 and has no triple bonds. (a) What is the index of hydrogen deficiency of squalene
Answer:
6
Explanation:
Molecular Formular = C30H50
Degree of saturation = (2C + 2 - H ) / 2
Degree of saturation = [ 2(30) + 2 - 50 ] / 2
Degree of saturation = ( 62 -50 ) / 2 = 12 / 2 = 6
Which of the following has an (S) Configuration
Answer:
As opposed to this, if the arrow goes counterclockwise then the absolute configuration is S.
Explanation:
A chemistry graduate student is given of a hydrocyanic acid solution. Hydrocyanic acid is a weak acid with . What mass of should the student dissolve in the solution to turn it into a buffer with pH
Here is the full question:
A chemistry graduate student was given 500 mL of a 1.60 M hydrocyanic acid (HCN) solution. Hydrocyanic acid is a weak acid with [tex]K_a = 4.9 \times 10^{-10}[/tex]. What mass of KCN should the student dissolve in the HCN solution to turn it into a buffer with pH = 9.16?
Answer:
36.85 g
Explanation:
From the given information above:
Recall that number of moles of HCN = mass of HCN / molar mass of HCN= mass of HCN / molar mass of HCN
Therefore;
the number of moles of HCN = [tex]\dfrac{500 \times 1.60}{1000}[/tex]
the number of moles of HCN = [tex]\dfrac{800}{1000}[/tex]
the number of moles of HCN = 0.8
The acid dissociation constant [tex]K_a[/tex] = [tex]4.9 \times 10^{-10}[/tex]
Thus the pKa = [tex]- log (4.9 \times 10^{-10})[/tex]
pKa = 9.31
However, the pH is given as:
[tex]pH = pKa + log \bigg ( \dfrac{KCN}{HCN} \bigg )[/tex]
[tex]9,16 =9.31 + log \bigg ( \dfrac{KCN}{0.8} \bigg )[/tex]
[tex]9,16 -9.31 =log \bigg ( \dfrac{KCN}{0.8} \bigg )[/tex]
[tex]-0.15 =log \bigg ( \dfrac{KCN}{0.8} \bigg )[/tex]
KCN = 0.566 mol
The standard molar mass of KCN = 65.11 g/mol
Thus, the mass of KCN = number of moles of KCN × molar mass of KCN
the mass of KCN = 0.566 × 65.11
the mass of KCN that the student needs to dissolve in HCN is = 36.85 g
What is the formula mass of (NH4)3 PO4? (Show work)
Answer:
Mass = 149g
Explanation:
N3 = 3x14u = 42
H12 = 12x1u = 12
P = 1x31u = 31
O4 = 4x16u = 64
42+12+31+64 = 149g
mixed nuts, halo-halo and buko sald
are exam
examples of what kina
of mixtured
Answer:
heterogeneous mixture
Explanation:
I'm not sure what halo halo or buko is but with mixed nuts you can see the mixture elements so that would be heterogeneous.
If you can't see the individual pieces in a mixture like ex: milk. that is a homogenous mixture.
What is the mass percent of water in nickel(II) sulfate hexahydrate?
The mass percent of water in nickel (II) sulfate hexahydrate is 41.129 %.
The chemical formula of nickel (II) sulfate hexahydrate is NiSO₄.6H₂O.
The mass of 1 mole of NiSO₄.6H₂O is:
[tex]mNiSO_4.6H_2O = mNi + mS + 10mO + 12mH \\= 58.69 g + 32.07 g + 10 \times 16.00 g + 12 \times 1.01 g = 262.88 g[/tex]
The mass of H₂O in 1 mole of NiSO₄.6H₂O is:
[tex]mH_2O = 6 \times (2mH + mO) = 6 \times (2 \times 1.01 g + 16.00 g) = 108.12 g[/tex]
The mass percent of H₂O in NiSO₄.6H₂O is:
[tex]\% H_2O = \frac{mH_2O}{mNiSO_4.6H_2O} \times 100 \% = \frac{108.12 g}{262.88 g} \times 100 \% = 41.129 \%[/tex]
The mass percent of water in nickel (II) sulfate hexahydrate is 41.129 %.
You can learn more about percent composition here: https://brainly.com/question/17505281
A given sample of a gas has a volume of 3.0 L at a pressure of 4.0 atm. If the temperature remains constant and the pressure is Changed to 6.0 atm, why is the new volume?
Answer:
2L
Explanation:
P1xV1=P2xV2
P1=4 atm
V1=3L
P2=6 atm
V2= ?
V2= (4 x 3)/ 6
V2=2L
what is the minimum amount of water is needed to dissolve 3.0 mol potassium dichromate (k2cr2o7)
Answer:
6.79 litres
Explanation:
Potassium dichromate is K2Cr2O7
Its molar mass = 294.18 g/mol
If,
1 mole = 294.18 g
3 mole = 3 x 294.18 g
= 882.54 g
Solubility of K2Cr2O7 is
4.9 g/100 mL at 0⁰c
13 g/100 mL at 20⁰c
102 g/100 mL at 100⁰c
No specific temperature is given so I have used 20⁰C since it is close to room temperature.
at 20⁰C:
13 g of K2Cr2O7 would dissolve in = 100 mL
So 1 g of K2Cr2O7 dissolves in = (100/13)
= 7.692
882.54 g of K2Cr2O7 dissolves in = 882.54 x 7.692
= 6788.59mL
We convert to litres
= 6.79 L
In which layer of the atmosphere do meteors burn up?
A: Thermosphere
B: Stratosphere
C: Mesosphere
D: Troposphere
Answer:
C Mesosphere
Explanation:
the meteors will travel through the exosphere and thermosphere without much trouble due to the lack of air in those layers but when they hit the middle layer which is the mesosphere there are enough gases to cause friction and create heat burn up in the mesosphere
(I did research on a helpful site! I hope this helps)
:)
Which susbatances are combinations of nonmetals
Which of the following would you get from playing too much tennis?
A. Muscular Dystrophy
B. Cerebral Palsy
C. Tendonitis
D. ALS
Answer:
a
Explanation: