A moonbow is occurred due to reflection and refraction of moonlight.
What is Moonbow?A moonbow also known as a lunar rainbow. It is the phenomenon occurs when the moonlight is refracted through water droplets in the air. The amount of light available from the full moon is very less than that produced by the sun. So, the moonbows are the type of rainbow, produced by the moonlight refraction and reflection through water droplets. Moonbows are fainter than rainbows.
Thus, a moonbow is occurred due to reflection and refraction of moonlight.
Learn more about Moonbow.
https://brainly.com/question/20098585
#SPJ1
help me please.....●_●
Answer:
Length -> meter
Mass -> kilogram
Time -> second
g for gram
mg for milligram
t for time
μm for micrometer
ms for millisecond
300cm = 3m
500g = 0.5kg
1500m = 1.5km
250ms = 0.25s
3.65×10^4g = 36.5kg
The brain can be best described as which classification of the body?
o bone
o organ
ogland
O muscle
An electron and a 0.0500-kg bullet each have a velocity of magnitude 510 m/s, accurate to within 0.0100%. Within what lower limit could we determine the position of each object along the direction of the velocity
The lower limit that could be used to determine the position of each object along the direction of the velocity is 1.136 x 10⁻³ m.
Uncertainty in the position of the electronThe uncertainty in the position of the electron is calculated as follows;
[tex]\Delta x = \frac{h}{4\pi m\Delta v}[/tex]
where;
h is Planck's constant = 6.63 x 10⁻³⁴ Jsm is mass of electronΔv uncertainty in velocity = (0.01 x 10⁻²) x 510 = 0.051 m/s[tex]\Delta x = \frac{6.63 \times 10^{-34} }{4\pi \times 9.11 \times 10^{-31} \times 0.051} \\\\\Delta x = 1.136 \times 10^{-3} \ m[/tex]
Thus, the lower limit that could be used to determine the position of each object along the direction of the velocity is 1.136 x 10⁻³ m.
Learn more about uncertainty in position here: https://brainly.com/question/1970053
#SPJ1
In real number multiplication, if uv1=uv2 and u does not equal zero we can cancel out u and conclude that v1=v2. Does the same rule hold for the dot product?
The conclusion v₁=v₂ can not be made. Let u=(1,1,1),v₁=(2,3,-5),v₂=(4,-1,-3). The dot product of u.v₁=uv₂ is satisfied,but v₁≠v₂.The correct answer is c.
What is dot product?The dot product, also known as the scalar product, is an algebraic operation that yields a single integer from two equal-length sequences of numbers.
The dot product of two vectors' Cartesian coordinates is commonly used in Euclidean geometry.
Because there may be more than the 1 vectors satisfying the expression.
[tex]\rm uv_1 = 1 \times 2 +1 \times 3 +1 \times(-5)=0[/tex]
[tex]\rm uv_2= 4-1-3 =0[/tex]
The v₁ is not found equal to the v₂.
The conclusion v₁=v₂ can not be made. Let u=(1,1,1),v₁=(2,3,-5),v₂=(4,-1,-3). The dot product of u.v₁=uv₂ is satisfied,but v₁≠v₂.The correct answer is c.
Hence, the correct answer is c.
To learn more about the dot product, refer to the link;
https://brainly.com/question/26550859
#SPJ4
Comets that come from the oort cloud have orbits that:
a. decay over time, bringing them closer to the sun each year.
b. have random tilts and orbits, sharing little with each other.
c. have very short orbits for their size and distance from the sun.
d. are evenly distributed between retrograde and prograde.
Comets that come from the Oort cloud have orbits that decay over time, bringing them closer to the sun each year. Option A is correct.
What are comets?Comets are frozen leftovers from the formation of the solar system composed of dust, rock, and ice.
They range from a few miles to tens of miles wide, but as they orbit closer to the Sun, they heat up and spew gases and dust into a glowing head that can be larger than a plane.
Comets that come from the Oort cloud have orbits that decay over time, bringing them closer to the sun each year.
Hence,option A is correct.
To learn more about comet refer:
https://brainly.com/question/12443607
#SPJ1
Answer:
B) have random tilts and orbits, sharing little with each other
Explanation:
Hope this helps, have a great rest of your day/ restful night!
* if air is blown with a speed of 15 m/sec across the top of one side of a u-tube containing water, what will be the difference between the water levels on the two sides?
if air is blown with a speed of 15 m/sec across the top of one side of a u-tube containing water, the difference between the water levels on the two sides is 1.3 cm.
What is density?The density is the ratio of the mass and volume of the particular object or liquid.
Applying the Bernoulli's equation across the ends of the tube A and B, we have
[tex]P_{A} = P_{B} - \dfrac{1}{2} \rho Av^{2}[/tex]
Substituting ρ = 1.2 , v = 15 and [tex]P_{B }=P_{0 }[/tex]
[tex]P_{A}= P_{B} -135[/tex]
In the left limb, [tex]P_{A}= P_{C}[/tex]
In the right limb, [tex]P_{D}= P_{o} + \rho g h[/tex]
The pressure at C and D are same.
[tex]P_{D}= P_{C}[/tex]
Substituting from the above equations , we have,
h = -1.3 cm
The height to the left limb is greater.
The difference between the water levels on the two sides is 1.3 cm.
Learn more about density.
https://brainly.com/question/15164682
#SPJ4
Both a transverse wave and a longitudinal wave have.
Answer:
Both waves are mechanical waves
The trait for flower color in a plant has red and white alleles. The red color is the dominant trait. What is the phenotypic ratio for a cross between plants with red (Rr) flowers and red (Rr) flowers?
4 red : 0 white
3 red : 1 white
2 red : 2 white
1 red : 1 white
Answer:
1.4 red : 0 white
Explanation:
Answer: A
Explanation:
A mouse eats 20 kJ of energy. The mouse uses 8 kJ of energy moving around. What would most of the leftover energy be turned into? ant is the leftover energy useful or wasted?
Answer:
to be turned into glycogen not wasted
Explanation:
Since the body has a lot of energy left it will turn that energy into glycogen which is a storage form of glucose which will when neccassary will be converted into glucose from the horomone glucagon and be given to the body to be used as energy so the energy is never wasted
The capacitor can withstand a peak voltage of 670 v. If the voltage source operates at the resonance frequency
The value of maximum voltage, when the capacitor can withstand a peak voltage of 670 v is 47.6 volts.
What is resonance frequency?Resonance frequency is the natural frequency of an particle or object. At this frequency, the object tries to vibrate at higher amplitude. It can be calculated with the following formula:
[tex]f=\dfrac{1}{2\pi LC}[/tex]
Here, L is the induction and C is the capacitance.
Let for an L-R-C circuit, the value of resistance is 400 ohm, induction is 0.380 Haney and capacitance is 1.20×10⁻² μF.
Put the values in above formula,
[tex]f=\dfrac{1}{2\pi(0.380)(1.20\times10^{-8})}\\f=2356.8\rm\; Hz[/tex]
The capacitor can withstand a peak voltage of 670 v. Use the following formula to find the value of current as,
[tex]I=2\pi fC\times Vc\\I=2\pi (2356.8)(1.20\times10^{-8})\times 670\\I=0.119\rm\; A[/tex]
The value of resistance is 400 ohms. Thus, the voltage is,
[tex]V=IR\\V=(0.119)(400)\\V=47.6\rm\; V[/tex]
Thus, the value of maximum voltage, when the capacitor can withstand a peak voltage of 670 v is 47.6 volts.
Learn more about the resonance frequency here:
https://brainly.com/question/3292140
#SPJ4
An object has a velocity of 8 m/s and a kinetic energy of 480 J. What is the mass of the object? (Formula: ) 7. 5 kg 15 kg 60 kg 120 kg.
Answer:
15 kg
Explanation:
KE = 1/2 * m * v² ⇒ m = (2*KE) / v²
m = (2*480) / 8²
m=15 kg
a seismic wave has a measured wavelength of 0.50 km. its frequency is 27 hz. what is the velocity of the wave?
Answer:V=13500m/s
As
V=fλ
Where v is velocity, f is frequency and λ is the wavelength
f=27hz or 27/s
λ=0.50km=0.50*1000m=500m
Putting given values in the formula
V=(27/s)*(500m)
V=13500m/sss
A wire is run through a large piece of paper, forming a perpendicular angle with the paper. A bunch of magentically senstive iron shavings are spread across the paper and a current is run through the wire. Which of the following would be the most accurate description of what would happen?
A. The filings would shape themselves into a square shape around the wire, each corner of the square perpendicular to the central wire
B. The filings would form parallel lines across the paper, each one forming a perpendicular angle with the central wire
C. The filings would shape themselves into a circular shape around the wire, the direction rotating based on the direction of the flow of current
D. The filings would all be attracted magnetically towards the wire and will all be pulled into a central mass in close proximity to the wire and will leave the outer part of the sheet of paper bare
Answer:
Option C
Explanation:
As they are iron shavings they are magnetic i.e they can be attracted by magnet .So when electric current is passed through the wire they would form an electromagnetic field .And the shape is circularDuring a car accident, a 125 kg driver is moving at 31 m/s and in 1.5 seconds is brought to rest by an inflating air bag. what is the magnitude of the change in momentum of the driver? 4.0 kg • meters per second 21 kg • meters per second 47 kg • meters per second 3900 kg • meters per second
The magnitude of the change in momentum of the driver is 3900kgm/s.
Hence option D) 3900 kg • meters per second is the correct answer.
What is Momentum?Momentum is simply the product of the mass of an object and its velocity.
Its is expressed as;
P = m × v
Where m is the mass of the object and v is its velocity.
Given the data in the question;
Mass of the driver m = 125kgVelocity v = 31m/sTime elapsed t = 1.5sWe substitute the given values into the expression above to determine the initial momentum of the driver before he was brought to rest.
P initial = m × v
P initial = 125kg × 31m/s
P initial = 3875 kgm/s ≈ 3900kgm/s
Now, as the driver is brought to rest, final velocity becomes zero
P final = 125kg × 0
P final = 0
This means that the change in momentum of the driver is his initial momentum which is 3900kgm/s.
Therefore, the magnitude of the change in momentum of the driver is 3900kgm/s.
Hence option D) 3900 kg • meters per second is the correct answer.
Learn more about momentum here: brainly.com/question/14952164
#SPJ4
Answer:
D for edge
Explanation:
GO GO GO TRUST ME
physics 13
physics geniuses where r u need help!!!
----------------------
pls also check other questions!
Answer:
Microphone
Explanation:
Microphone is the device which converts sound into electrical energy by electromagnetic induction
What amount of charge passes through a 3.0 amp television in 1.3 hours?
Answer:
60
Explanation
Dont judge me but I convert 1.3 hours to 78 minutes, then divide with 3.0 and we end up with 60C
The amount of charge that passes through a 3.0 amp television in 1.3 hours would be 14040 Coulombs.
What is an electric charge?Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.
I = Q / T
As given in the problem, we have to find out what amount of charge passes through a 3.0 amp television in 1.3 hours.
Let us first convert the time period of hours into seconds
1 hour = 3600 seconds
1.3 hours = 1.3 × 3600 seconds
= 4680 seconds
By using the above relation between electric current and electric charge
and by substituting the respective values of the charge and the time period
I = Q / T
3 = Q / 4680
Q = 3 × 4680
= 14040 Coulombs
Thus, the amount of charge that passes through a 3.0 amp television in 1.3 hours would be 14040 Coulombs.
To learn more about an electric charge from here, refer to the link given below ;
brainly.com/question/8163163
#SPJ5
What question is maya most likely trying to answer? how does the type of material used in the core affect the strength of an electromagnet? how does the number of loops of wire affect the strength of an electromagnet? how does the speed at which an iron bar is removed from wire loops affect the strength of an electromagnet? how does the thickness of the wire affect the strength of an electromagnet?
The question is maya most likely trying to answer is, how does the thickness of the wire affect the strength of an electromagnet?
What is effect of thickness of wire on strength of electromagnet?
From the experimental set-up by maya, we can determine the effect of thickness of wire on strength of electromagnet.
R ∝ 1/A
where;
R is resistance of the wiresA is area of the wires (from thickness or radius of the wire)As the thickness of the wire increases, the area of the wire increases and the resistance of the wire will decrease. As the resistance of the wire decreases, the current flowing in the wire increases as well.
Thus, the increase in the thickness of a wires increases, the strength of an electromagnet.
Learn more about strength of an electromagnet here: https://brainly.com/question/2331156
#SPJ4
Answer:
A
Explanation:
Which types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light? Select two options. Radio waves infrared light microwaves gamma rays visible light X-rays.
Answer:
the answer is equal to the microwave gamma rays visible light x-rays.
Ip three resistors, r1r1r_1 = 11 ωω , r2r2r_2 = 68 ωω , and r3=rr3=r, are connected in series with a 24. 0 vv battery. The total current flowing through the battery is 0. 20 aa
The three resistances are connected in series, their equivalent is equal to the addition of all the resistances. The unknown value of resistance is 1.74 ohm.
What is resistance?The resistance is the opposition offered to the flow of current.
Given the value of resistance R₁ is 1 ohm, R₂ is 68 ohm and R₃ is R.
The total current flowing through the battery of voltage 24 V is 0.20 Amperes.
From the ohms law, The equivalent resistance is
[tex]R_{eq}[/tex] = Voltage / Current
The equivalent resistance is
[tex]R_{eq}[/tex] = R₁+ R₂+R₃
24 / 0.20 = 1+68+R
R = 1.74 ohm
The unknown value of resistance is 1.74 ohm.
Learn more about resistance.
https://brainly.com/question/11431009
#SPJ4
A string of 5 (Five) 15 ohm Christmas tree lights are connected in parallel. One burns out, the rest will stay lit. Calculate the total resistance when one of the bulbs is out.
Pt 2.
Those five 15 ohm, series connected Christmas tree lights, calculate the total current in the circuit if they are connected to a 115 V source. What would be total power?
Pt. 3
Those five 15 ohm parallel connected Christmas tree lights. Calculate the total current in the circuit if they are connected to a 115 V source. Calculate total Power.
Please list formula and data etc etc
Answer:
r = 15 ohms for a single bulb
1 / R = 1 / r + 1 / r + 1 / r + 1 / r
R = r / 4 = 15 / 4 = 3.75 ohms total resistance
part II
If bulbs are in series R = 5 * 15 ohm = 75 ohm total resistance
P = I V = V / R * V = V^2 / R
P = 115^2 / 75 = 176 watts
part III
If the bulbs are in parallel then
R = 15 / 5 = 3 ohms for the circuit
I = 115 / 3 = 38.3 amps for circuit
P = 115^2 / 3 = 4400 watts
Check: P = I V = 38.3 * 115 = 4400 watts
As altitude increases, what happens to air pressure?
it fluctuates.
it increases.
it decreases.
it stays the same.
As altitude increases, air pressure decreases. hence option C is correct.
What is Atmospheric pressure ?It is pressure exerted by the weight of the atmosphere at sea level. its value is 101,325 Pascal which we call it as 1 atmospheric pressure expressed as 1 atm. i.e. 1 atm = 101,325 N/m².
Like water has pressure when we go long inside the water, our atmosphere has also pressure from top to surface of the earth.
There are different layers of atmosphere from bottom to top which are Troposphere, Stratosphere, Mesosphere, Thermosphere and Exosphere.
Each layer has its own range and weight.
When we are on the surface of the earth, all layers of atmosphere will apply pressure. but when we increase altitude(height), the number layers reduces and its weight too.
Hence as altitude increases, air pressure decreases.
To know more about pressure, click :
https://brainly.com/question/12497098
#SPJ5
What portion of the electromagnetic spectrum is used for mass spectrometry
The energy of the electromagnetic spectrum is not used in mass spectrography to make measurements.
What is mass spectrometry?In physics and chemistry, mass spectrometry refers to statistical analytical techniques that allow scientists to determine the mass distribution of various types of molecules based on their mass on a substance.
The energy of the electromagnetic spectrum is not used in mass spectrography to make measurements. The process of mass spectrometry is primarily based on the interaction of molecules with a beam of electrons (rather than photons) and the subsequent measurement.
Hence the energy of the electromagnetic spectrum is not used in mass spectrography to make measurements.
To know more about Mass spectrometry follow
https://brainly.com/question/17368088
#SPJ4
What are voltage and current in electricity?
Answer:
Voltage, electric potential difference, electric pressure or electric tension is the difference in electric potential between two points, which is defined as the work needed per unit of charge to move a test charge between the two points.
0.318 cm. What is the ideal mechanical advantage?
The ideal mechanical advantage will be 8.017. The ideal mechanical advantage value may be grater than the actual value of mechanical advantage.
What is mechanical advantage ?
Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtained efficiency of forces in levers and pulley.
The ideal mechanical advantage is found as;
[tex]\rm IMA = \frac{d \pi}{l} \\\\ \rm IMA = \frac{0.812 \times \pi}{0.318} \\\\ IMA=8.017[/tex]
The ideal mechanical advantage will be 8.017.
To learn more about the mechanical advantage, refer to the link;
https://brainly.com/question/7638820
#SPJ1
The magnitude of the earth pulling on you is equivalent to your body weight.
O A. True
OB. False
Answer:
I think its O A. True.
What is an animal that lays eggs in nests and some of it's genuses lack the ability
hint: it is 5 letters long
another hint : _ _ r _ s
Answer:
I think is cookoo because i learn it from web
Explanation:
I found it in web so yea
1- The wave length is the distance between the middle of a crest to the middle of the next trough
true
or
false
Answer:
False
Explanation:
Middle of crest to middle of NEXT CREST is wavelength
the period of a 400 hertz sound wave is ___ second
Answer:
0.0025 sec
Explanation:
Period = 1 / frequency = 1/400 = 0.0025 sec
At what point of a projectile motion, acceleration and velocity are perpendicular to each other?
Answer:
At the topmost point where the velocity has only horizontal component whereas the acceleration is vertical.
Explanation:
There is only a horizontal component of velocity at the ap3x of the projectile, and acceleration is vertically downwards owing to gravitation, therefore velocity and acceleration are perpendicular to one another.
Explain How did Aristotle's inability to detect parallax lead him to propose a geocentric model of the solar system?
Answer:
Aristotle was blind, therefore could not see change in positions. Aristotle could see no detectable change in the positions of the stars, thought Earth was immovable.
Explanation: