Wetlands are able to remove nutrients and chemicals from water as the water flows through the area. A developer is planning to destroy most of the wetlands near a bay. In three to five sentences, explain how destroying the wetlands would impact the bay’s water quality and ecosystem.

56g is the coreect acsnw

The best choice that explains why atoms of carbon-14 (c-14) are unstable is there are 2 more protons than neutrons in the nucleus

An atom is said to be stable if the number of neutrons in the nucleus is greater than number of protons in the nucleus, because the the neutrons increases the nuclear force which keeps the atom stable.

Thus, the best choice that explains why atoms of carbon-14 (c-14) are unstable is there are 2 more protons than neutrons in the nucleus.

Learn more about stable atom here: https://brainly.com/question/1948879

#SPJ4

Answer:

D. there are 2 more neutrons than protons in the nucleus.

Explanation:

The result of two alpha decay of Thorium 230 is Radon-222.

The radioactive decay results in the release of the subatomic particles resulting in reduction in the mass number by 4, and the atomic number by 2.

The result of alpha decay of thorium 230 is given as:

[tex]\rm ^{230}_{90}Th\;\rightarrow\;^{226}_{88}Ra\;+\;^{4}_{2}\alpha[/tex]

[tex]\rm ^{226}_{88}Ra\;\rightarrow\;^{222}_{86}Rn\;+\;^{4}_{2}\alpha[/tex]

The result of two alpha decay of Thorium 230 is Radon-222.

Learn more about alpha decay, here:

https://brainly.com/question/14081292

#SPJ4

The speed of water waves in the sea, which have wavelength 300 m is 21 m/s.

Speed is the distance travelled by an object in per unit time.

Given that, the wavelength of the waves is 300 m

The frequency of the waves is 0.07 hz

To find the speed

By the formula of speed

Speed = frequency × Wavelength

Putting the value in the equation

Speed = 300  × 0.07 = 21

Thus, the speed of these waves is 21 m/s

Learn more about speed

https://brainly.com/question/7359669

#SPJ4

The molar concentration of Cl⁻ ions in a 1. 00 m solution of AgCl₂ with no excess silver ions is 0.020M.

Molar concentration of Chloride ions present in the silver chloride solution will be calculated by using the formation constant equation as:

Kf = [AgCl₂] / [Ag²⁺][Cl⁻]²

For AgCl₂ value of Kf is 2.5×10⁵.

Chemical reaction with ICE table is:

                           Ag²⁺(aq)  +  2Cl⁻(aq)  →  AgCl₂

Initial:                         0               0                1

Change:                    +x             +2x             -x

Equilibrium:               x                2x             1-x

On putting all the values on the Kf equation, we get

2.5×10⁵ = (1-x) / (x)(2x)²

x is negligible as compared to 1 so the term 1-x becomes 1,

2.5×10⁵ = 1 / 4x³

x = 9.97 × 10⁻³ M

Concentration of chloride ions = 2x = 2(9.97 × 10⁻³) = 0.020M.

Hence the molar concentration of chloride ions is 0.020M.

To know more about molar concentration, visit the below link:

https://brainly.com/question/21841645

#SPJ4

Answer:

Quarts of blood = 72000

Quarts of urine = 720

Explanation:

Here, we know that

1 year = 365 days

For blood

200 × 365 = 72000

For urine

2 × 365 = 720

Thus, The average person's kidney filters 72000 quarts of blood and 720 quarts of urine.

The pH of a solution that is 0.50 M in HCOOH is 2.045.

pH of the solution will be calculated by taking the negative logarithm of the concentration of H⁺ ion.

Given chemical reaction will be:

                            HCOOH(aq)   ⇄   H⁺(aq)   +   HCOO⁻(aq)

Initial:                         0.50                    0                    0

Equilibrium:              0.50-x                  x                    x

Given that, pKa = 3.75

Ka = [tex]10^{-pKa}[/tex]

Ka = [tex]10^{-3.75}[/tex] = 0.000178

Ka for the above equation will be written as:
Ka = [H⁺][HCOO⁻]/[HCOOH]

Ka = (x)² / (0.50-x)

x is negligible as compared to 0.5, so the equation becomes

0.000178 = (x)² / 0.50

x² = (0.000178)(0.5) = 0.000089

x = 0.009

[H⁺] = 0.009M

pH will be calculated as:

pH = -log(0.009) = -(-2.045) = 2.045

Hence pH of the solution is 2.045.

To know more about pH, visit the below link:

https://brainly.com/question/22390063

#SPJ4

Explanation:

It's so because we know that stone is insoluble, ain't it, so it takes space in water & the water level rises.

But, when a spoon of sugar is added to water, it is soluble & hence mixes with water, so it doesn't rise.

I Hope this helps! (ㆁωㆁ)

Answer:

Im pretty sure its B) 43

Explanation:

Answer:

carbon nuclei...........

Answer:

The molecular weight of sodium sulfate is 142.1 g/mol. To calculate the mass of sodium sulfate, substitute the values in the formula. Therefore, the mass of sodium sulfate formed when we start with 200.0 grams of sodium hydroxide and you have excess sulphuric acid is 355.25g.

Answer:

Substances that dissolve most readily in water include ionic compounds and polar covalent compounds. aqueous solution. water that contains dissolved substances. solvent. the dissolving medium in a solution.

Explanation:

The compound that a carbon-carbon double bond is Butene.

Alkene is a hydrocarbon containing at least a carbon–carbon double bond. Alkene is often used as synonym of olefin, that is, any hydrocarbon containing one or more double bonds.

Read more on Alkene:

https://brainly.com/question/24270289

#SPJ1

The energy i.e. needed is 26.8 kJ of energy

The calculation is as follows:

the moles of diethyl ether is

= 1.01 moles

Since one mole of diethyl ether require heat = 26.8 kJ

Now the energy should be the same i.e. 26.8

Learn more: brainly.com/question/5763151?referrer=searchResults

When silver nitrate reacts with potassium sulfate, the products would be silver sulfate and potassium nitrate.

The reaction between silver nitrate and potassium sulfate is a double replacement reaction that is represented by the following equation:

[tex]2 AgNO_3 + K_2SO_4 --- > Ag_2SO_4 + 2 KNO_3[/tex]

Thus, the products are silver sulfate ([tex]Ag_2SO_4[/tex]) and potassium nitrate ([tex]KNO_3[/tex]).

More on double replacement reactions can be found here: https://brainly.com/question/19267538

#SPJ4

Answer:

A

Explanation:

Answer:

a state of matter created when particles, called bosons, are cooled to near absolute zero (-273.15 degrees Celsius, or -460 degrees Fahrenheit).

Explanation:

hope this helps

pls mark brainliest

The individual numbers which are present in chemical formula is subscript.

Chemical formula of any compound of chemistry consist more than one atoms in it and gives idea about the number of atoms present in that compound.

Given chemical formula of glucose is C₆H₁₂O₆.

In the given chemical formula of glucose, number which shows the amount of carbon, hydrogen and oxygen are known as subscripts.

Hence, individual number are subscript.

To know more about chemical formula, visit the below link:
https://brainly.com/question/1603500

#SPJ1

The concentration of the copper half cell with 0.22 V is [tex]\rm \bold{5.7\;\times\;10^{-11}\;M}[/tex].

In the electrochemical cell, the reduction and oxidation takes place in different electrodes, and thereby it is termed as half cell. The standard cell potential of the given cell is 0 V.

The reduction potential of one half cell cathode is considered to be given as 1.6 mM. The cell potential is 0.22 V.

The potential of the half cell is given as:

[tex]\rm E=E^\circ_{cell}-\dfrac{0.059}{n}\;log\dfrac{anode}{cathode}\\\\0.22\;V=0-\dfrac{0.059}{2}\;log\dfrac{anode}{1.6\;\times\;10^-^3\;M}\\\\Anode\;conc.=5.7\;\times\;10^{-11}\;M[/tex]

The concentration of the copper half cell with 0.22 V is [tex]\rm \bold{5.7\;\times\;10^{-11}\;M}[/tex].

Learn more about half-cell, here:

https://brainly.com/question/14213618

#SPJ4

a. pressure increases

Gay Lussac's Law

When the volume constant, the gas pressure is proportional to its absolute temperature

[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

The chemical equation for the reaction between HCl and NaOH  is HCl+NaOH → NaCl+H₂O.

Neutralization reactions are those in which an acid and base reacts for the formation of water molecule and salt.

Chemical reaction between the hydrochloric acid and sodium hydroxide base is shown by the below equation

HCl + NaOH → NaCl + H₂O

Where sodium chloride is a salt.

Hence the chemical equation is HCl + NaOH → NaCl + H₂O.

To know more about neutralization reaction, visit the below link:

https://brainly.com/question/203541

#SPJ4

Half-life is a time in which the concentration of the substance gets reduced to 50% of the initial concentration. The number of tritium that will be left after 51 years is 0.624 kg.

Isotopes are chemical substances that have the same atomic number but different atomic mass because they have a different number of neutrons in the nuclei.

The half-life of the isotope, tritium is 12.3 years. Assuming we have 11 kg of substance and a number of years 51 years.

[tex]11 \times 2 ^{\frac{-51}{12.3}} = 0.6239 \;\rm kg[/tex]

Therefore, the number of tritium that will be left after 51 years is 0.624 kg.

Learn more about half-life here:

https://brainly.com/question/17018072

#SPJ4

Answer: 0.44

Explanation:

The specific heat of iron if 985 J of energy is required to raise the temperature of 158.5 g from 10.0°C to 24.0°C is 0.44J/g°C.

The specific heat capacity of a substance can be calculated using the following formula:

Q = m × c × ∆T

Where;

985 = 158.5 × c × (24°C - 10°C)

985 = 2219c

c = 985/2219

c = 0.44 J/g°C

Therefore, the specific heat of iron if 985 J of energy is required to raise the temperature of 158.5 g from 10.0°C to 24.0°C is 0.44J/g°C.

Learn more about specific heat capacity at: https://brainly.com/question/1747943

#SPJ2

Answer:

given statement is completely true

e.g . water H2O

Answer:

True

Explanation:

Water is amphoteric, which means it can act as both a Braonsted-Lowry acid and a Bronsted-Lowry base. Strong acids and bases ionize completely in aqueous solution, while weak acids and bases ionize only partially. The conjugate base of a Brønsted-Lowry acid is the species formed after an acid donates a proton.

The pressure (in atm) in a 5 L tank with 37.50 grams of oxygen gas at 350 K is 6.715 atm.

Pressure of gas will be calculated by using the ideal gas equation as:
PV = nRT, where

P = pressure = ?

V = volume = 5 L

R = universal gas constant = 0.082 L.atm / K.mol

T = temperature = 350 K

n is the moles of gas and it will be calculated as:
n = W/M, where

W = given mass = 37.50 g

M = molar mass of oxygen = 32g/mol

n = 37.50/32 = 1.17 mol

On putting all these values, we get

P = (1.17)(0.082)(350) / (5) = 6.715 atm

Hence resultant pressure of the oxygen gas is 6.715 atm.

To know more about ideal gas equation, visit the below link:

https://brainly.com/question/1056445

#SPJ4

Answer:

true

Explanation:

Because water has a ability to flow electricity through it

Answer:

Acidic

Explanation:

pOH = - log (9.8 x 10^-11)

pOH = 10

pOH + pH = 14

pH = 14-10

pH = 4

Anything below pH of 7 is acidic.

ΔH for the process is -252.3 cal/mol or -1056 j/mol.

A solid salt compound dissociates in liquid water to form an aqueous solution of its constituent ions.

This is a chemical reaction, with the required heat change at constant pressure termed the enthalpy of solution.

If this value is positive, then the final prepared solution will have a lower temperature than the starting pure solvent.

Conversely, a negative enthalpy value results in a solution temperature that is higher than the starting solvent temperature.

It is given that

NaOH (s) → Na (aq) + OH (aq)

mass of NaOH is 16.9 g

mass of water = 70 g

ΔT = 86.6-22.4 °C = 64.2 °C

q = m × Cg × ΔT

q = amount of energy released or absorbed

m = mass

Cg = specific heat capacity

ΔT = change in temperature

n = m ÷ M

n = moles of solute

m = mass of solute

M = molar mass of solute

ΔHsoln = q ÷ n

ΔHsoln = molar enthalpy (heat) of solution

q = amount of energy (heat) released or absorbed

n = moles of solute

Cg= 1 cal/gm/°C

Now substituting the values in the equation

q = m × Cg × ΔT

q = 16.9 * 1 * 64.2

q = 1085 cal

n = m ÷ M

M= 70/18=3.9

n=16.9/3.9

n=4.3

ΔH = q ÷ n

ΔH =1085 /4.3

ΔH= -252.3 cal/mol or -1056 j/mol

Therefore ΔH for the process

NaOH(s) → Na(aq) + OH(aq)

is -252.3 cal/mol or -1056 j/mol

To know more about Enthalpy of solution

https://brainly.com/question/23768874

#SPJ1

The required volume of 0.10M NaOH solution that student will add is 20 mL.

Volume of any solution which is required to prepare buffer will be calculated by using the below equation as:

M₁V₁ = M₂V₂, where

On putting values, we get

V₁ = (0.1)(20) / (0.1) = 20mL

Hence required volume of NaOH solution is 20mL.

To know more about molarity & volume, visit the below link:

https://brainly.com/question/24305514

#SPJ4

Answer:

his procedure being repeated with the same or similar outcome

Explanation:

For findings to be valid, they must be reproducible. Thus, if others perform the same experiment and they get the same results, then soda might increase your height.

It's like if I claim that by saying bloody mary 3 times in mirror and I saw the ghost. For this to be valid, you and other need to do it and see if you do indeed see the ghost.