The scalar components of vector c are:
cx = 57 m/scy = -3 m/s.How to find the difference between the vectors?
Here we have the vectors:
a = <35m/s, 15m/s>
b = <-22 m/s, 18 m/s>
And we want to find the difference, which is given by:
c = a - b = <35m/s, 15m/s> - <-22 m/s, 18 m/s>
The difference is computed component by component, so we get:
c = <35m/s + 22m/s, 15m/s - 18m/s>
c = <57 m/s, -3 m/s>
Then the scalar components of vector c are:
cx = 57 m/s
cy = -3 m/s.
If you want to learn more about vectors:
https://brainly.com/question/3184914
#SPJ11
A proton moves in the negative x-direction through a uniform magnetic field in the negative y-direction what is the direction of the magnetic force acting on the proton?
out of the page
into the page
in the positive y-direction
in the negative y-direction
Prakash kicks a ball of mass 500 g which moves with a velocity of 10 m/s. Passang kicks the same ball and it moves with a velocity of 20 m/s. Compare the kinetic energy acquired by the ball in the two cases. TL Thou Prakash kicks a ball of mass 500 g which moves with a velocity of 10 m / s . Passang kicks the same ball and it moves with a velocity of 20 m / s . Compare the kinetic energy acquired by the ball in the two cases . TL Thou
Answer:
750
Explanation:
The kinetic formula is 1 over 2 *mass * velocity Square
We have an Atwood device, two blocks connect by a string strung over a pulley, but the twist this time is that both blocks are on perfectly smooth inclines. The upper block is on an incline 15 degrees to the horizontal and has a mass of 7kg. The lower block is on an incline of 65 degrees to the horizontal and has a mass of 11kg. Find the acceleration of the system?
The Acceleration of the system is 6.41 m/s².
Given,
α= 15°, m₁ = 7kg
β= 65°, m₂ = 11 kg
Let, a be the acceleration and T is the tensions at the end it's the cord.
Let, the mass m₂ be coming down along the inclined plane along the inclined surface towards downward m₂g sin β and the tension in the upward direction,
Resultant force, m₂a=m₂g sin β -T
11a=((11) ×g sin 65°) -T ...(i)
Now, considering the motion of m₁ which moves downwards, the forces are m₁g sinα, and T both are acting downwards.
Resultant force m₁a = m₁g sin α+T
7a =7g sin 15°+T ...(ii)
Solving both the equations by adding them,
18a=11gsin 65°+7g sin 15°-T+T
18a=11gsin 65°+7g sin 15°=115.45
a=115.45/18=6.41 m/s²
Hence, the Acceleration of the system is 6.41 m/s².
Learn more about the acceleration here:
https://brainly.com/question/22048837
#SPJ10
a note of frequency 200Hz has a velocity of 400m/s. what is the wavelength of the note
Answer:
[tex]\huge\boxed{\sf \lambda = 2 m}[/tex]
Explanation:
Given data:Frequency = f = 200 Hz
Velocity = v = 400 m/s
Required:Wavelength = λ = ?
Formula:v = fλ
Solution:Put the givens in the formula
400 = (200)λ
Divide 200 to both sides
400/200 = λ
2 m = λ
λ = 2 m
[tex]\rule[225]{225}{2}[/tex]
In one day, a large tree sheds 82 gallons of water through its leaves into the atmosphere. how many cubic meters of water is this?
Answer:
0.372779 cubic meters
Explanation:
Answer:
.3104 m^3
Explanation:
1 gal (US) = .00378541178 m^3
An extraterrestrial civilisation lives on a planet with a very elliptical orbit. Additionally, thousands of large asteroids orbit their solar system. The civilisation uses the light from their home star to count the number of asteroids in the direct line between the star and their planet. For a first measurement, they count the asteroids for 60 days and detect 1000 objects. Several months later, they start a second measurement: This time, they count for 80 days. How many asteroids will they detect during the second measurement? Explain why. (Note: Assume that the asteroids are homogeneously distributed in their solar system.)
i will mark as a brainiest please help me as soon
For Kepler's third law this can be solved as normal ratios
1000/60=x/80100/6=x/806x=8000x=8000/6x=1333.34asteroidsThe number of asteroids which will be detected during the second measurement is 1333.34.
What is an Asteroid?These are referred to objects which revolve round the sun and are characterized by their small rocky shape.
Kepler's third law can be used to solved it using normal ratios
1000/60=x/80
100/6 = x/80
6x = 8000
x= 8000/6
x=1333.34asteroids
Read more about Asteroids here https://brainly.com/question/11996385
#SPJ9
Why is CH4 not a suitable proxy for the surface pressure?
Explanation:
Methane (CH4) is 30 times stronger than carbon dioxide as an absorber of infrared radiation.
Answer:
The main reasons why CH4 has a higher vapor pressure at a given temperature when compared to CH3Cl is that CH4.
And Is 30 Times Stronger than Carbon dioxide...
Explanation:
Hope It Helps!!!
define reference point
Answer:
A reference point is a place or object used for comparison to determine if something is in motion. An object is in motion if it changes position relative to a reference point.
Hope this helps:)
Many medicines started out as natural products. Aspirin was originally made from _______________
A. The bark of the willow tree
B. Poppies
C. Mold
D. The foxglove flower.
Answer:
A
Explanation:
ASA was found in the bark of willow trees.
The strength of a magnetic field around a wire carrying a current of 20 A is 0.004 T. What is the strength of the magnetic field if the current is changed to 40 A ?
Given the increased current, the strength of the magnetic field around the wire carrying the current increases to 0.008T
What is the strength of the magnetic field if the current is changed to 40 A ?Given that;
First scenario
Strength of magnetic field B = 0.004TCurrent A = 20ASecond scenario
Strength of magnetic field B' = ?Current I' = 40AFirst, we determine the strength of the magnetic field.
B/I = B'/I'
0.004T/20A = B'/40A
B' = ( 0.004T × 40A ) / 20A
B' = 0.16AT / 20A
B' = 0.008T
Given the increased current, the strength of the magnetic field around the wire carrying the current increases to 0.008T
Learn more about magnetic field here: brainly.com/question/15695203
#SPJ12
which of the following best decribes
the 12-lead ecg shows st-segment elevation in leads v2 and v3 of ≥ 0.2 mv. what is this finding indicative of?
The 12-lead ECG test that shows st-segment elevation in leads v2 and v3 of ≥ 0.2 mv, could be a diagnostic for myocardial infarction.
What is 12 - lead ECG test?
A 12-lead electrocardiogram (ECG) is a medical test that is recorded using leads, or nodes, attached to the body.
Electrocardiograms, sometimes referred to as ECGs, capture the electrical activity of the heart and transfer it to graphed paper.
When a 12-lead ECG shows st-segment elevation in leads v2 and v3 of ≥ 0.2 mv, it could be a diagnostic for myocardial infarction.
Learn more about 12 - lead ECG test here: https://brainly.com/question/9328700
#SPJ11
Explain how differences in air pressure allows us to breathe
Difference in air pressure helps us by contraction and relaxation of lungs which forces air in and out of the lungs.
What is pressure?The pressure is the amount of force applied per unit area. It is represented as
Pressure p = Force/Area
The atmospheric pressure is constant. The flow of air is determined by how much above or below atmospheric pressure. The pressure inside the lungs rises or falls. The diaphragm in the lung contracts and relaxes which forces air in and out of the lungs.
Hence, the person uses diaphragm of lungs to breathe.
Learn more about pressure.
https://brainly.com/question/12971272
#SPJ1
matter falling into a black hole arranges itself in the shape of a ____.
Matter falling into a black hole arranges itself in the shape of a disk that is thick at the outer edge, thin along the inner ring.
What is black hole?A black hole is a region of space time where gravity is so strong that nothing or no particles or even electromagnetic radiation such as light can escape from it.
Thus, matter falling into a black hole arranges itself in the shape of a disk that is thick at the outer edge, thin along the inner ring.
Learn more about black hole here: https://brainly.com/question/10597324
#SPJ11
5. On a hot summer day the grass feels cooler than the sidewalk, because
O
O
the grass has a higher specific heat
the grass has a smaller surface area
the sidewalk is at a higher temperature
Answer:
because the side walk is at high temperature
The farther you bring charged objects
Answer:
Weaker, stronger
Explanation:
hope this helped!
Answer:
[tex]\fbox {weaker, stronger}[/tex]
Explanation:
The farther you bring charged objects from each other, the weaker the electrical force between them, and the bigger the charges on the objects, the stronger the electrical force between them.
Proving
Here we need the formula for Coulomb's Law, which is :
[tex]\boxed {F = \frac{1}{4\pi\epsilon_{0}}\times\frac{q_{1}q_{2}}{r^{2}}}[/tex]
As we can see, when the distance increases, the overall force will decrease as they are inversely proportional.
Similarly, as the product of charges is directly proportional to the electrical force produced, as the charges increase, the force increases.
51. A balloon starts rising from the ground, vertically upwards, uniformly at the rate of 1 m s-1. At the end of 4 seconds, a body is released from the balloon. Calculate the time taken by the released body to reach the ground. 51. A balloon starts rising from the ground , vertically upwards , uniformly at the rate of 1 m s - 1 . At the end of 4 seconds , a body is released from the balloon . Calculate the time taken by the released body to reach the ground
Answer:
4s
Explanation:
when a bOdy rises into the air,the time it takes to reach a particular height is the same as the time it will take the body to fall from that height to the ground.
a girl swims along the length of 80m in swimming pool and comes back in 1.5sec. find her distance and displacement
the distance is the first 80m+the second 80m she came back. So the distance is 160m. but the displacement is 0, because she came back by the direction she went.
what should be done to protect forest ?
Plant trees on places where forests have been chopped down to restore damaged ecosystems. Encourage individuals to live in a way that is environmentally friendly. Create parks to conserve the rainforests and animals. Companies that operate in environmentally friendly methods should be supported.
durning which type of process does pressure remain consistent
A.Isothermal
B.isolated
C.Adiabatic
D.Isobaric
Answer:
[tex]\fbox {D. Isobaric}[/tex]
Explanation:
The process during which pressure remains constant is called an isobaric process.
What did johannes kepler contribute to the study of planets? he formulated the universal law of gravitation. he identified the first moons of jupiter. he collected detailed data that led to the proposal of the heliocentric model. he provided mathematical support for the heliocentric model.
Johannes Kepler contributed to the study of planets : He provided mathematical support for the heliocentric model.
What is Kepler's first law of planetary motion?Kepler's first law of planetary motion states that the planets revolve around the Sun in orbits elliptical in shape with the Sun at its one of the focus.
As the planets rotate around the Sun, the relative distance between the Sun and planets increases and decreases.
The heliocentric model in which the Earth and planets revolve around the Sun at the center of the universe. Johannes gave the mathematical calculations of this model.
Thus, last option is correct.
Learn more about Kepler's first law of planetary motion.
https://brainly.com/question/4978861
#SPJ1
Answer:
D
Explanation:
You are riding a bicycle you apply forward force of 50 n, and you and the bicycle have a combined mass of 100kg. What is the acceleration of the bicycle?
Answer:
a = 0.5m.s²
Explanation:
Fnet = m×a
50 = 100×a
a = 0.5
Suppose the resistance of a copper wire is 1.05 ohms at 30°C. Find the temperature at which the resistance becomes 1.50 ohms.
Suppose the resistance of a copper wire is 1.05 ohms at 30°C. the temperature is mathematically given as
T=139.89
What is the temperature at which the resistance becomes 1.50 ohms.?Generally, the equation for the coefficient of change is mathematically given as
[tex]\mu_k= 0.2+(0.043)3\\\\\mu_k=0.2+(0.043)(4.343)[/tex]
[tex]\mu_k=0.387[/tex]
In conclusion, the Temperature of copper
[tex]R=R_0( 1+ \alpha(T-T1))[/tex]
1.5(1+0.005(T-30))
T=139.89
Read more about temperature
https://brainly.com/question/24238338
#SPJ1
You have a wooden bench in your living room. You set your backpack on the bench and lean your hand against the wall. Name two action-reaction pairs that are present in this situation
The action-reaction pairs in the given situation are:
the backpack and the bench the and and the wallWhat are action-reaction pairs?Action-reaction pairs are two forces which are equal but oppositely directed in their line of action.
Action-reaction pairs are according to Newton's third law of motion.
The action-reaction pairs in the given situation are:
the backpack and the bench the and and the wallLearn more about action-reaction pairs at: https://brainly.com/question/12800382
#SPJ1
The compass uses a pendulous system to improve?
The compass is designed and developed to use a pendulous system to improve horizontality.
What is a compass?A compass can be defined as a scientific instrument that contains a magnetized pointer, which is used to show and indicate the following four (4) main cardinal directions:
North (N)South (S)West (W)East (E)Basically, the compass is a scientific instrument that's designed and developed to use a pendulous system to improve horizontality.
Read more on compass here: https://brainly.com/question/11165627
#SPJ12
How would the number 13,900 be written using scientific notation?
a. 13.9 x 104
C.
b. 1.39 x 104
1.39 x 10³
d. 1.39 x 105
Which one is it??
Answer:
um d. but I am guessing this ans
a lunar probe is moving 1670 m/s at a 73.0 angle. it needs to land on the moon 3.71 x 10^8 m away in a 46.0 direction in 8.64 x 10^4 s. what is the magnitude of the acceleration that the engine must produce?
The magnitude of the acceleration that the engine must produce is 0.065 m/s².
What is acceleration?Acceleration is given by the ratio of Resultant or total force acting on any object and the its mass.
It can also be defined as the rate change of velocity with time.
acceleration a = (Δv) / (Δt)
Given is a lunar probe is moving 1670 m/s at a 73° angle. it needs to land on the moon 3.71 x 10⁸ m away in a 46° direction in 8.64 x 10⁴ s.
The initial velocity will be
1670 x cos (73°-46°) = 1487.981 m/s
Using the second equation of motion, we have
s = ut + 1/2 at²
The final velocity will be zero after landing on Moon.
Substituting the values, we have
3.71 x 10⁸= 1487.981 x 8.64 x 10⁴ + 1/2 a ( 8.64 x 10⁴)²
Solving the equation, we get
acceleration, a = 0.065 m/s²
Thus, the magnitude of the acceleration that the engine must produce is 0.065 m/s²
Learn more about acceleration.
https://brainly.com/question/12550364
#SPJ1
Answer:
The direction is 30.6
Explanation:
Which processes occur during the second stage of technological design? Check all that apply.
designing a solution
studying relevant information
rebuilding and retesting
reporting a solution
defining criteria of success
identifying a problem
building a prototype
Answer:
designing a solution
Explanation:
after knowing & identifying a problem we start putting a solution
A 10-cm long pencil is placed upright 50 cm from a concave mirror with focal length 0.50 m. What will be
the characteristics of any image that is formed?
A virtual and erect image is formed by concave mirror.
What is focal length?The focal length of the mirror is the distance between the lens and the image sensor.
It is also defined as the distance from a lens or mirror to the focal point.
It is also stated by the formula
[tex]\frac{1}{y} +\frac{1}{u} = \frac{1}{f}[/tex]
u = -50 cm and f = 0.50 m (50cm)
[tex]\frac{1}{v} +\frac{1}{-50} =\frac{1}{50}[/tex]
v= -50 cm
where - sign shows that image is virtual.
Magnification m= [tex]\frac{v}{u}[/tex]
m = -50/50
m = 0
hence, virtual and erect image will be formed.
For more Focal length question visit
https://brainly.com/question/16188698
#SPJ1
Two cars, with the same mass and traveling at the same speed, hit large trees head-on. One car has a rigid body that undergoes little or no deformation in the collision. The other has ``crumple zones'': portions of the body designed to crumple and deform in such a collision. How does this improve the chances that the driver of the second car will survive the event
The crumple zones in the second car will improve the chance of survival of the driver because it will act as shock absorber, reducing the impact of the force on the driver.
Newton's third law of motion
According to Newton's third law of motion, action and reaction are equal and opposite.
The car with rigid body will exert maximum force to the driver while the car with crumple zone will exert lesser force to the driver since the crumple zone will act as shock absorber, reducing the impact of the force on the driver.
Thus, the crumple zones in the second car will improve the chance of survival of the driver because it will act as shock absorber, reducing the impact of the force on the driver.
Learn more about Newton's third law of motion here: https://brainly.com/question/25998091
#SPJ1