Use the electron-transfer method to balance this equation:


solid copper and dilute nitric acid react to produce copper(ii) nitrate, water, and nitrogen monoxide gas (no)

Answer: C. law of conservation of mass

Explanation:

The answer is  is approximately 344.16 L.

To find the volume of 34.6 mol O2 at 2.5 atm and 30°C, we can use the Ideal Gas Law equation: PV = nRT.

In this equation:
P = pressure (2.5 atm)
V = volume (which we need to find)
n = moles of gas (34.6 mol O2)
R = ideal gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin (30°C + 273.15 = 303.15 K)

Rearrange the equation to solve for V: V = nRT / P

Now, plug in the values: V = (34.6 mol)(0.0821 L atm/mol K)(303.15 K) / (2.5 atm)

Calculate the volume: V ≈ 344.16 L

The volume of 34.6 mol O2 at 2.5 atm and 30°C is approximately 344.16 L.

To know more about Ideal gas law:

https://brainly.com/question/27870704

#SPJ11

The retentate flow rate is 5,021.862 kg/h and the permeate flow rate is 5,021.862 kg/h. The membrane surface area required is 3,517.948 m².

Permeate flow is the rate at which a fluid passes through a membrane. It is a measure of the membrane's permeability, which is the ability of a substance to pass through a membrane. Permeate flow is used in many industrial processes, such as purification of fluids, separation of compounds, and concentration of liquids.

The first step is to calculate the mass flow rate of the feed. This is given by the equation:

Mass flow rate (kg/h) = Feed flow rate (kg/h) x Feed concentration (wt%)

Mass flow rate = 9,905 kg/h x 57.5 wt% = 5,686.625 kg/h

Next, we need to calculate the flow rate of the retentate and permeate in kg/h. This is given by the equation:

Flow rate (kg/h) = Mass flow rate (kg/h) x Retentate/Permeate concentration (wt%)

Retentate flow rate = 5,686.625 kg/h x 16.4 wt% = 931.939 kg/h

Permeate flow rate = 5,686.625 kg/h x 88.2 wt% = 5,021.862 kg/h

Finally, we need to calculate the membrane surface area in m². This is given by the equation:

Membrane surface area (m²) = Permeate flow rate (kg/h) / Total permeate mass flux (kg/m²-h)

Membrane surface area = 5,021.862 kg/h / 1.43 kg/m²-h = 3,517.948 m².

To learn more about permeate flow

https://brainly.com/question/31377281

#SPJ4

The percent yield of KOH is 60.26%.

To calculate the percent yield, we first need to find the theoretical yield and then compare it with the actual yield. In this case, the actual yield is given as 75.00 grams.

1. Find moles of water (H2O):
40.0 g H2O × (1 mol H2O / 18.02 g H2O) = 2.2198 mol H2O

2. Use the balanced chemical equation to find moles of KOH:
H2O + KO → KOH + 1/2 H2
From the balanced equation, 1 mol of H2O produces 1 mol of KOH. Thus,
2.2198 mol H2O × (1 mol KOH / 1 mol H2O) = 2.2198 mol KOH

3. Find the theoretical mass of KOH:
2.2198 mol KOH × (56.11 g KOH / 1 mol KOH) = 124.44 g KOH

Now that we have the theoretical yield (124.44 g KOH) and the actual yield (75.00 g KOH), we can calculate the percent yield:

Percent Yield = (Actual Yield / Theoretical Yield) × 100
Percent Yield = (75.00 g KOH / 124.44 g KOH) × 100 = 60.26%

So, the percent yield of KOH is 60.26%.

To learn more about yield, refer below:

https://brainly.com/question/30700754

#SPJ11

57.49 g of HCl reacting with 98.20 g of [tex]AgNO_3[/tex] will produce 62.3 g of AgCl precipitate.

To determine the grams of AgCl (s) precipitate produced, we first need to write and balance the chemical equation for the reaction between hydrochloric acid (HCl) and silver nitrate ([tex]AgNO_3[/tex]) that produces silver chloride (AgCl) precipitate:

HCl (aq) + [tex]AgNO_3[/tex]  (aq) → AgCl (s) + [tex]HNO_3[/tex] (aq)

From the balanced equation, we can see that one mole of [tex]AgNO_3[/tex] reacts with one mole of HCl to produce one mole of AgCl.

To determine the limiting reactant in the reaction, we need to calculate the number of moles of each reactant:

moles of HCl = 57.49 g / 36.46 g/mol = 1.577 mol

moles of [tex]AgNO_3[/tex] = 98.20 g / 169.87 g/mol = 0.578 mol

Since [tex]AgNO_3[/tex] has fewer moles than HCl, it is the limiting reactant. This means that all of the [tex]AgNO_3[/tex] will be consumed in the reaction, and any excess HCl will be left over.

The number of moles of AgCl produced can be calculated from the number of moles of [tex]AgNO_3[/tex] :

moles of AgCl = moles of [tex]AgNO_3[/tex] = 0.578 mol

The mass of AgCl produced can be calculated using the molar mass of AgCl:

mass of AgCl = moles of AgCl x molar mass of AgCl

mass of AgCl = 0.578 mol x (107.87 g/mol) = 62.3 g

For more question on precipitate click on

https://brainly.com/question/20469884

#SPJ11

The normal boiling point of the 3.45 mol solution of KBr is 104.7384°C.

The normal boiling point of a 3.45 mol solution of KBr with a density of 1.10 g/mL can be calculated using the formula:

ΔT = Kb * molality

where ΔT is the boiling point elevation, Kb is the molal boiling point elevation constant for water (0.512°C kg/mol), and molality is the number of moles of solute per kilogram of solvent.

First, we need to calculate the mass of the solvent (water) required to dissolve 3.45 mol of KBr. The molar mass of KBr is 119 g/mol, so 3.45 mol of KBr would weigh 409.55 g.

Since the density of the solution is given as 1.10 g/mL, the volume of the solution is:

V = m / ρ = 409.55 g / 1.10 g/mL = 372.32 mL

So, the mass of the water is:

mH2O = V * ρH2O = 372.32 mL * 1 g/mL = 372.32 g

The molality of the solution can be calculated as follows:

molality = moles of solute / mass of solvent (in kg) = 3.45 mol / 0.37232 kg = 9.27 mol/kg

Substituting the values in the formula for boiling point elevation:

ΔT = 0.512°C kg/mol * 9.27 mol/kg = 4.7384°C

The normal boiling point of pure water is 100°C, so the boiling point of the KBr solution would be:

Boiling point = 100°C + ΔT = 100°C + 4.7384°C = 104.7384°C

To know more about boiling point, refer here:

https://brainly.com/question/14771622#

#SPJ11

The mass of oxygen is 16 g

The mass of oxygen is 2.4 g

We know from the balanced reaction equation that;

[tex]CH_{4}[/tex]+ 2[tex]O_{2}[/tex] ---> [tex]CO_{2}[/tex] + 2[tex]H_{2} O[/tex]

Number of moles of[tex]CH_{4}[/tex] = 4.06 g/16 g/mol

= 0.25 moles

If 1 mole of [tex]CH{4}[/tex] reacts with 2 moles of[tex]O_{2}[/tex]

0.25 moles of [tex]CH_{4}[/tex] reacts with 0.25 * 2/1

= 0.5 moles

Mass of the oxygen = 0.5 moles * 32 g/mol

= 16 g

The balanced reaction equation is;

2S[tex]O_{3}[/tex](g)⇋2S[tex]O_{2}[/tex](g)+[tex]O_{2}[/tex](g)

Number of moles of sulfur trioxide = 12.3 g/80 g/mol

= 0.15 moles

If 2 moles of S[tex]O_{3}[/tex] produces 1 mole of oxygen

0.15 moles ofS[tex]O_{3}[/tex]will produce 0.15 * 1/2

= 0.075 moles

Mass of oxygen = 0.075 moles * 32 g/mol

= 2.4 g

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

To determine the mass of copper (II) sulfate in the hydrate, we need to understand the concept of a hydrate. A hydrate is a compound that has water molecules bound to it. Copper (II) sulfate is a hydrate, meaning it has water molecules attached to it. To find the mass of copper (II) sulfate in the hydrate, we need to remove the water molecules from the compound and calculate the remaining mass of the anhydrous salt.

To do this, we need to use the molar mass of the hydrate and the molar mass of the anhydrous salt. The molar mass of copper (II) sulfate pentahydrate is 249.68 g/mol, and the molar mass of anhydrous copper (II) sulfate is 159.61 g/mol. This means that the water molecules in the hydrate account for 90.07 g/mol of the total mass.

Now, let's assume we have 5 grams of the hydrate. We can use this information to calculate the mass of copper (II) sulfate in the hydrate. First, we need to calculate the number of moles of the hydrate by dividing the mass by the molar mass:

5 g / 249.68 g/mol = 0.02002 mol
Next, we need to calculate the number of moles of water in the hydrate by multiplying the total number of moles by the molar mass of water:

0.02002 mol x 18.015 g/mol = 0.3609 g
Finally, we can calculate the mass of anhydrous copper (II) sulfate by subtracting the mass of water from the total mass of the hydrate:
5 g - 0.3609 g = 4.6391 g

Therefore, the mass of copper (II) sulfate in the hydrate is:

4.6391 g * (159.61 g/mol / 249.68 g/mol) = 2.9647 g

In conclusion, to find the mass of copper (II) sulfate in the hydrate, we need to subtract the mass of water from the total mass of the hydrate and then convert the remaining mass to the mass of anhydrous copper (II) sulfate.

To kno wmore about hydrate refer here

https://brainly.com/question/11202174#

#SPJ11

When a 27. 7 g sample of ethylene glycol (C = 2. 42 J/gºC) at 42. 76°C is cooled to 32. 5°C the amount of heat released is  685.87 joule.

To calculate the heat released when a 27.7 g sample of ethylene glycol is cooled from 42.76°C to 32.5°C, you can use the formula:

q = mcΔT

where q represents the heat released, m is the mass (27.7 g), c is the specific heat capacity (2.42 J/gºC), and ΔT is the change in temperature (42.76°C - 32.5°C).

ΔT = 42.76°C - 32.5°C = 10.26°C

Now plug in the values into the formula:

q = (27.7 g) × (2.42 J/gºC) × (10.26°C) = 685.87 J

So, 685.87 Joules of heat are released when the 27.7 g sample of ethylene glycol is cooled from 42.76°C to 32.5°C.

Know more about Specific heat capacity here:

https://brainly.com/question/29766819

#SPJ11

I₂ is a solid, Br₂ is a liquid, while Cl₂ and F₂ are gases because of their increasing molecular size and decreasing strength of their intermolecular forces.

The main factor influencing the physical states of halogens is the strength of the intermolecular forces (Van der Waals forces) between their molecules.

As you move down Group 17 in the periodic table (from F₂ to I₂), the size and mass of the halogen molecules increase. Larger molecules have a greater number of electrons, leading to stronger dispersion forces (a type of Van der Waals forces) between molecules.

For I₂, these forces are strong enough to hold the molecules together in a solid form. For Br₂, the forces are slightly weaker but still strong enough to form a liquid. However, in Cl₂ and F₂, the forces are weaker, allowing the molecules to be in a gaseous state at room temperature.

In summary, the physical states of the halogens depend on the strength of their intermolecular forces, which is influenced by the size and mass of the molecules.

To know more about intermolecular forces click on below link:

https://brainly.com/question/9007693#

#SPJ11

a) To determine the number of grams of I2 needed to react with 36.7 g of N2H4, we need to use stoichiometry.

The balanced equation for the reaction is:

2I2 + N2H4 → 4HI + N2

From the equation, we can see that 2 moles of I2 react with 1 mole of N2H4 to produce 4 moles of HI. So, the mole ratio of I2 to N2H4 is 2:1.

First, we need to determine the number of moles of N2H4 in 36.7 g:

moles of N2H4 = mass / molar mass

moles of N2H4 = 36.7 g / 32.045 g/mol

moles of N2H4 = 1.146 mol

Since the mole ratio of I2 to N2H4 is 2:1, we need half as many moles of I2 as there are moles of N2H4:

moles of I2 = 1.146 mol / 2

moles of I2 = 0.573 mol

Finally, we can calculate the number of grams of I2 needed:

mass of I2 = moles of I2 x molar mass of I2

mass of I2 = 0.573 mol x 253.81 g/mol

mass of I2 = 145.5 g

Therefore, 145.5 grams of I2 are needed to react with 36.7 grams of N2H4.

b) To determine the number of grams of HI produced from the reaction of 115.7 g of N2H4 with excess iodine, we need to use stoichiometry again.

The balanced equation for the reaction is:

2I2 + N2H4 → 4HI + N2

From the equation, we can see that 2 moles of I2 react with 1 mole of N2H4 to produce 4 moles of HI. So, the mole ratio of HI to N2H4 is 4:1.

First, we need to determine the number of moles of N2H4 in 115.7 g:

moles of N2H4 = mass / molar mass

moles of N2H4 = 115.7 g / 32.045 g/mol

moles of N2H4 = 3.609 mol

Since the mole ratio of HI to N2H4 is 4:1, we can calculate the number of moles of HI produced:

moles of HI = 4 x moles of N2H4

moles of HI = 4 x 3.609 mol

moles of HI = 14.436 mol

Finally, we can calculate the number of grams of HI produced:

mass of HI = moles of HI x molar mass of HI

mass of HI = 14.436 mol x 127.91 g/mol

mass of HI = 1846.5 g

Therefore, 1846.5 grams of HI are produced from the reaction of 115.7 grams of N2H4 with excess iodine.

To know more about react refer here

https://brainly.com/question/14168723#

#SPJ11

129.3 mL of NaOH are required to react with all the HCl in the 10.00 mL aliquot.

To solve this problem, we need to use stoichiometry and the concept of limiting reagents.

First, let's calculate the number of moles of HCl used in the reaction:
7.50 mL of 2.00 M HCl = 0.015 mol HCl

Next, let's use stoichiometry to determine the number of moles of CaCO₃ that reacted with the HCl:
1 mol CaCO₃ reacts with 2 mol HCl
0.015 mol HCl x (1 mol CaCO₃ / 2 mol HCl) = 0.0075 mol CaCO₃

Now we can use the mass and molar mass of CaCO₃ to determine the mass of CaCO₃ used:
mass CaCO₃ = number of moles x molar mass
mass CaCO₃ = 0.0075 mol x 100.1 g/mol = 0.751 g

However, this mass was used to make a 125.0 mL solution, so we need to calculate the concentration (in M) of this solution:
0.751 g / 125.0 mL = 0.006008 M

Now we can use the volume and concentration of the NaOH solution to determine the number of moles of NaOH used:
10.00 mL of 0.058 M NaOH = 0.00058 mol NaOH

Finally, we can use stoichiometry to determine the volume of NaOH required to react with all the HCl in the 10.00 mL aliquot:
1 mol HCl reacts with 1 mol NaOH
0.0075 mol HCl x (1 mol NaOH / 1 mol HCl) = 0.0075 mol NaOH
volume of NaOH = number of moles / concentration
volume of NaOH = 0.0075 mol / 0.058 M = 0.1293 L = 129.3 mL

Therefore, 129.3 mL of NaOH are required to react with all the HCl in the 10.00 mL aliquot.

To know more about stoichiometry :

https://brainly.com/question/28780091

#SPJ11

The heat of reaction for the combustion of a mole of Ti in this calorimeter is 15221.209 kJ/mol.

First, we need to calculate the amount of heat absorbed by the calorimeter:

ΔT = 91.60°C - 25.00°C = 66.60°C

q = (9.84 kJ/°C) x (66.60°C) = 655.344 kJ

Since the combustion of 2.060 g of titanium caused this increase in temperature, we can calculate the heat of reaction per mole of titanium:

molar mass of Ti = 47.87 g/mol

moles of Ti combusted = 2.060 g / 47.87 g/mol = 0.043 mol

ΔHrxn = q / n = 655.344 kJ / 0.043 mol = 15221.209 kJ/mol

To know more about combustion refer to-

https://brainly.com/question/15117038

#SPJ11

Answer: 64 I think

Explanation:

unsure of wether or not there is a specific shape given but the original equation for volume is length x width x height so just multiply all..

4 x 4 = 16

16 x 4 = 64

a) A pH of 5 for river water near a factory does suggest a potential pollution problem. The normal pH range for most natural waters is around 6.5-8.5. pH values below 6.5 can indicate acidification, which can be caused by pollutants such as sulfur dioxide and nitrogen oxides from industrial activities, or from natural sources such as acid rain.

A pH of 5 is more acidic than most natural waters and could indicate the presence of acidic pollutants in the water.

Therefore, in terms of b) Other evidence that would be useful to consider before reaching a conclusion about whether the pH of 5 represents a pollution problem includes:

Read more about river water here:

https://brainly.com/question/19609890

#SPJ1

The molar concentration of the solution is 0.25 M.

The molar concentration of a solution, also known as molarity, is defined as the number of moles of solute per liter of solution.

In this case, the amount of Ca(OH)2 dissolved is 0.55 mol and the volume of water used is 2.20 L. Therefore, the molar concentration can be calculated using the formula:

Hence, the molar concentration of the solution is 0.25 M.

To learn more about molar concentration, here

https://brainly.com/question/21841645

#SPJ4

Type of Acid-Base Reactions: Acid-Base Neutralization Reactions. A hydroxide ion (OH-) is an anion with a single hydrogen atom and two oxygen atoms.

Hydrogen is the lightest of all elements, and is a colorless, odorless, tasteless, non-metallic gas. It is the most abundant element in the universe, making up around 75% of all matter. Hydrogen has three isotopes: protium (the most common), deuterium, and tritium. Hydrogen is found on Earth in compounds of other elements, such as water (H2O), and in hydrocarbons, such as natural gas (CH4). It is a key component of many fuels and can be used to generate electricity through fuel cells.

All acid-base neutralization reactions produce a salt and water. The salt will depend on the acid and base used in the reaction.The pH of a 0.25M solution of H3O+ is 0.The pH of a 6.3x10-8M solution of H3O+ is 7.21.The pH of 0.25M solution of H3O+ (0) is a base, while the pH of 6.3x10-8M solution of H3O+ (7.21) is neutral.The pH of 0.25M solution of H3O+ (0) is a strong acid, while the pH of 6.3x10-8M solution of H3O+ (7.21) is a weak acid.

To learn more about hydrogen

https://brainly.com/question/24433860

#SPJ4

The changes that occur in the parent nucleus during gamma decay are limited to the emission of a gamma ray and the associated decrease in energy. The mass and atomic number of the nucleus remain unchanged.

In gamma decay, the parent nucleus does not undergo any changes in terms of its mass or atomic number. Instead, the nucleus emits a gamma ray, which is a high-energy photon. This gamma ray is released as the nucleus transitions from an excited state to a lower energy state.

The emission of a gamma ray does not affect the number of protons or neutrons in the nucleus. This means that the atomic number and mass number of the nucleus remain the same before and after gamma decay.

However, the emission of a gamma ray does result in a decrease in the energy of the nucleus. This is because gamma rays have a very high frequency and carry a lot of energy. By releasing a gamma ray, the nucleus is able to shed some of this excess energy and move to a lower energy state.

For more such questions on nucleus

https://brainly.com/question/5223117

#SPJ11

An object in motion will continue to move at a constant velocity unless acted upon by an external force. This principle is known as Newton's First Law of Motion, also referred to as the law of inertia.

Inertia is the tendency of an object to resist changes in its state of motion.

Similarly, an object at rest will remain at rest unless acted upon by an external force. This means that if an object is not moving, it will continue to stay still until a force is applied to it.

Newton's First Law of Motion is a fundamental concept in physics that explains how objects behave when in motion or at rest. It is important to understand this law because it helps us to predict how objects will move and interact with each other.

Additionally, it is also essential in the design and engineering of machines and structures that require a thorough understanding of motion and force.

To know more about inertia, visit:

https://brainly.com/question/3268780#

#SPJ11

Bright, yellow-orange sunsets only occur when the atmosphere is  fairly clean. The correct option is a.

The sky above is the one aspect of the atmosphere. In the reality, the planet's atmosphere is made up of the numerous layers of the gases. The two gases that are the most prevalent in the Earth's atmosphere are by the far nitrogen and the oxygen. About the 78% of dry air will contains nitrogen, and about the 21% of it is the oxygen.

Fewer than the 1% of the atmosphere is made up of the combination of the gases, including the carbon dioxide and the argon, the Water vapor. Therefore, the correct option is a.

To learn more about atmosphere here

https://brainly.com/question/13129618

#SPJ4

Answer:

Explanation:

From the balanced chemical equation, we can see that one mole of CaCO3 reacts with one mole of CaSO4. Therefore, we can use the molar mass of CaCO3 and the given amount of CaSO4 to calculate the amount of CaCO3 needed, and then convert it to mass.

Number of moles of CaSO4 = Mass / Molar mass

Number of moles of CaSO4 = 136 / 136

Number of moles of CaSO4 = 1

Since the reaction is 1:1, the number of moles of CaCO3 required is also 1. Therefore, we can use the molar mass of CaCO3 to calculate the mass required:

Mass of CaCO3 = Number of moles x Molar mass

Mass of CaCO3 = 1 x 100

Mass of CaCO3 = 100 g

Therefore, the answer is (1) 100 g.

PLS MARK ME BRAINLIEST

The predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype.

To predict the phenotypic and genotypic outcome of a cross between two plants heterozygous for round peas, we need to first understand the genetics involved.

Round peas are dominant over wrinkled peas, which means that the genotype for round peas can be either homozygous dominant (RR) or heterozygous (Rr), while the genotype for wrinkled peas is homozygous recessive (rr).

When two plants heterozygous for round peas are crossed (Rr x Rr), there are three possible genotypic outcomes for their offspring: RR, Rr, or rr. However, because round peas are dominant, any offspring with at least one R allele (RR or Rr) will have a round phenotype.

Therefore, the predicted phenotypic outcome of this cross will be that 75% of the offspring will have a round phenotype, while 25% will have a wrinkled phenotype. The predicted genotypic outcome will be that 25% of the offspring will be homozygous dominant (RR), 50% will be heterozygous (Rr), and 25% will be homozygous recessive (rr).

To know more about phenotype, visit:

https://brainly.com/question/20730322#

#SPJ11

Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.

To determine which fertilizer, ammonium sulfate or ammonium phosphate, would yield the largest amount of corn for ethanol production, you need to consider the nitrogen content in each fertilizer.

Ammonium sulfate has the chemical formula (NH4)2SO4. It contains 2 nitrogen atoms (N), 8 hydrogen atoms (H), 1 sulfur atom (S), and 4 oxygen atoms (O). The molar mass of nitrogen is 14 g/mol, so the nitrogen content in ammonium sulfate is:
2(N) = 2(14 g/mol) = 28 g/mol.

The molar mass of ammonium sulfate is 132.14 g/mol. To calculate the percent of nitrogen in ammonium sulfate, divide the nitrogen mass by the total molar mass and multiply by 100:
(28 g/mol) / (132.14 g/mol) × 100 = 21.2%.

Ammonium phosphate has the chemical formula (NH4)3PO4. It contains 3 nitrogen atoms, 12 hydrogen atoms, 1 phosphorus atom, and 4 oxygen atoms. The nitrogen content in ammonium phosphate is:
3(N) = 3(14 g/mol) = 42 g/mol.

The molar mass of ammonium phosphate is 149.09 g/mol. To calculate the percent of nitrogen in ammonium phosphate, divide the nitrogen mass by the total molar mass and multiply by 100:
(42 g/mol) / (149.09 g/mol) × 100 = 28.2%.

Based on the nitrogen content, you should choose ammonium phosphate as it contains a higher percentage of nitrogen (28.2%) compared to ammonium sulfate (21.2%), which will potentially yield a larger corn crop for ethanol production.

To know more about ethanol production refer here: https://brainly.com/question/31574140#

#SPJ11

According to the law of conservation of mass, the total mass of the reactants in a chemical reaction is equal to the total mass of the products.

This means that the mass of the reactants before the reaction is the same as the mass of the products after the reaction. In other words, mass is neither created nor destroyed during a chemical reaction, it is only transformed from the reactants into the products.

Therefore, the masses of the reactants and the products in a chemical reaction are directly related and must balance each other. This relationship is fundamental in chemistry and is used to calculate the amount of reactants and products in a chemical reaction, as well as to predict the outcome of the reaction.

To know more about the conservation of mass refer here :

https://brainly.com/question/14549722#

#SPJ11

The concentration of Cu(OH) is 0.185 M.

To find the concentration of Cu(OH), we need to use the balanced chemical equation for the neutralization reaction:
Cu(OH)₂ + 2 H₂(C₂₀₄)  → Cu(C₂₀₄) )₂ + 4H2O

From the equation, we can see that 2 moles of  H₂(C₂₀₄)  react with 1 mole of Cu(OH)₂.

Therefore, we can use the following equation to calculate the moles of Cu(OH)₂:
moles of Cu(OH)₂ = moles of  H₂(C₂₀₄) / 2

To find the moles of  H₂(C₂₀₄) , we can use the concentration and volume of the H₂(C₂₀₄)  solution:
moles of  H₂(C₂₀₄)  = concentration of  H₂(C₂₀₄)  x volume of  H₂(C₂₀₄)  (in liters)

We need to convert the volume of the  H₂(C₂₀₄)  solution from milliliters to liters:
volume of  H₂(C₂₀₄)  = 47.8 mL = 0.0478 L

Substituting the given values, we get:
moles of H₂(C₂₀₄) = 0.56 M x 0.0478 L = 0.026768 moles

Now we can calculate the moles of Cu(OH)₂:
moles of Cu(OH)₂ = 0.026768 moles / 2 = 0.013384 moles

To find the concentration of Cu(OH), we need to divide the moles of Cu(OH)₂ by the volume of the Cu(OH) solution in liters:
concentration of Cu(OH) = moles of Cu(OH)₂ / volume of Cu(OH) (in liters)

We need to convert the volume of the Cu(OH) solution from milliliters to liters:
volume of Cu(OH) = 72.4 mL = 0.0724 L

Substituting the calculated values, we get:
concentration of Cu(OH) = 0.013384 moles / 0.0724 L = 0.185 M
Therefore, the concentration of Cu(OH) is 0.185 M.

To know more about neutralization reaction :

https://brainly.com/question/28970253

#SPJ11

When selenium (Se) is found in the compound SEO42-, it has undergone hybridization to form sp3 hybrid orbitals.

Hybridization is the process by which atomic orbitals of different energy levels combine to form hybrid orbitals with the same energy level. In SEO42-, the Se atom is bonded to four oxygen (O) atoms, and to form these bonds, the Se atom has to hybridize its orbitals.

In its ground state, Se has six valence electrons in its outermost shell - two in the 4s orbital and four in the 4p orbital. To form the four bonds with O, Se hybridizes its orbitals by promoting an electron from the 4s orbital to the 4p orbital. This gives Se four half-filled 4p orbitals, which then hybridize to form four sp3 hybrid orbitals.

Each of these hybrid orbitals is then used to form a sigma bond with one of the four O atoms.

In summary, when Se is found in SEO42-, it undergoes sp3 hybridization to form four sp3 hybrid orbitals, each of which is used to form a sigma bond with one of the four O atoms. This hybridization results in a tetrahedral arrangement of the atoms around the Se atom in the molecule.

To know more about hybridization, visit:

https://brainly.com/question/14140731#

#SPJ11

Answer:

This data gives a relationship between amount of solute and volume of solution: 5.67 g KCl /. 100.0 mL. To find molarity we must convert grams KCl to moles hope this helps

Explanation:

In the 17th group of the modern periodic table, fluorine has the highest ability to receive electrons.

This is because it has the highest electronegativity among the elements in this group, making it more likely to attract and accept electrons from other elements during chemical reactions.

Fluorine is indeed the most electronegative element in the periodic table. Electronegativity is a measure of an atom's tendency to attract electrons in a chemical bond.

Fluorine's high electronegativity arises from its small atomic size and strong nuclear charge, which results in a strong attraction for electrons.

Due to its high electronegativity, fluorine has a strong ability to attract and accept electrons from other elements during chemical reactions. It readily forms covalent bonds by sharing electrons with less electronegative elements.

Fluorine's electron affinity and its ability to form stable, negatively charged ions make it a strong oxidizing agent.

It's worth noting that the trend of increasing electronegativity generally follows from left to right across a period and decreases down a group in the periodic table.

Therefore, while fluorine is the most electronegative element in Group 17 (the halogens), it may not necessarily have the highest ability to receive electrons among all elements in the 17th group.

To learn more about elements, refer below:

https://brainly.com/question/13025901

#SPJ11

The air temperature difference in 2050 from 2000 could be 1.8 - 4.0 degrees Celsius.

Temperatures refer to the degree of hotness or coldness of a substance or environment. Temperatures are usually measured with thermometers, which measure the thermal energy of a system. Temperatures can be measured in Fahrenheit, Celsius, or Kelvin. In general, temperatures tend to increase as the amount of thermal energy in a system increases.

It is impossible to accurately predict the exact air temperature difference in 2050 from 2000 without more information. However, it is estimated that the global average temperature could increase anywhere from 1.8 - 4.0 degrees Celsius by 2050, compared to pre-industrial levels. Therefore, a reasonable range of the air temperature difference in 2050 from 2000 could be 1.8 - 4.0 degrees Celsius.

To learn more about temperatures

https://brainly.com/question/29867784

#SPJ4

The molarity is 0.37 M

The molality is 1.71 m

Molarity is a unit of concentration used to measure the amount of a solute in a solution. It is defined as the number of moles of solute dissolved per liter of solution (mol/L). In other words, molarity tells us how many moles of solute are present in each liter of solution.

The formula for calculating molarity is:

Molarity (M) = moles of solute ÷ volume of solution in liters

Molarity = 100g/180 g/mol * 1/1.5 L

= 0.37 M,

Molality = 200g/58.5g/mol * 1/2 Kg

1.71 m

Learn more about molarity:https://brainly.com/question/8732513

#SPJ1