Answer:
0 C
Explanation:
A chemical formula is given.
CO+C+0
What does the formula describe?
Answer:
carbon and oxygen
Explanation:
c stands for carbon and o stands for oxygen
Write the principle of separation of mixture.
Explanation:
Mixtures can be separated using a variety of techniques. Chromatography involves solvent separation on a solid medium. Distillation takes advantage of differences in boiling points. Evaporation removes a liquid from a solution to leave a solid material.
A 475 cm3 sample of gas at standard temperature (273 K) and pressure
(1 atm) is allowed to expand until it occupies a volume of 600. cm3. What
temperature would be needed to return the gas to standard pressure (1 atm)?
(n = constant
Answer:
T₂ = 344.8 K
Explanation:
Given data:
Initial volume of gas = 475 cm³
Initial temperature = 273 K
Final volume = 600 cm³
Final temperature = ?
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₂ = T₁V₂/V₁
T₂ = 273 K × 600 cm³ / 475 cm³
T₂ = 163800K . cm³ / 475 cm³
T₂ = 344.8 K
14. How do you describe an atom in which the number of protons is equal
to the number of electrons?
what does it mean if elements are in the same group on the periodic table?
Answer:
mostly metals
Explanation:
just learned
Orbital diagram for an iron atom
Which table best summarizes the subatomic particles and their electrical charge?
H
F proton
negative
positive
no charge
neutron
electron
positive
no charge
negative
proton
neutron
electron
G proton
neutron
electron
positive
negative
no charge
proton
neutron
electron
no charge
positive
negative
Answer:
Proton - Positive charge
Neutron - No charge
Electron - negative charge
Explanation:
An atom is the smallest particle of matter that takes part in a chemical reaction.
It is made up of three fundamental subatomic particles.
Protons are the positively charged particles in an atom. Neutrons do not carry any charges and are neutralElectrons are negatively chargedBoth the protons and neutrons occupy a tiny center where the mass of the atom is concentrated. The region is called the nucleus.
Acetone molecule polor or nonpolar?
what is the covalent bond for Hydrogen + Chlorine (HCI)
Answer:
HCl, also known as hydrochloric acid, has a covalent bond. The hydrogen (H) atom shares an electron with the chlorine (Cl) to form the bond.
Explanation:
Consequently, the bonding electrons in hydrogen chloride are shared unequally in a polar covalent bond. The molecule is represented by the conventional Lewis structure, even though the shared electron pair is associated to a larger extent with chlorine than with hydrogen.
What is the role for dna in determining an organisms traits?
Answer:
DNA contains the genes or the genetic material of an organism. Its role is to store information that are essential in controlling the genetic makeup or producing a certain characteristic of an organism.
What information does not need to be included a chemical waste label? Select one: Relative amounts of chemical compounds in the container. The date the waste container was filled completely. A description of the experiment the chemicals were used for. Names of the chemical compounds present in the container.
Answer:
A description of the experiment the chemicals were used for.
Explanation:
A chemical waste label is required to provide information about any hazardous waste present in the container. Some details are mandatory to mention of the chemical waste label to prevent any accident while doing the experiment, that includes:
Chemical compound's name present in the container.Composition and physical state of the waste.Hazardous properties of the waste.The date of manufacturing.Amount of chemical compounds filled in the container.A chemical waste label does not mention or describe the experiment for which the chemicals were used for, scientists, teacher or students should have knowledge of the chemical composition by reading their names and evaluate themselves on which chemical should be used for which experiment.
Hence, the correct answer is "A description of the experiment the chemicals were used for."
The correct answer is A description of the experiment the chemicals were used for.
A chemical waste label must contain all the information about any hazardous waste present in the container. It should clearly indicate the composition of the waste, the date of manufacturing and the amount of chemical compounds filled in the container. A chemical waste label does not need to mention the experiment for which the chemicals were used.
Learn more;
https://brainly.com/question/20368258
Solid formation begins with the weathering of ____?
Subsoil
Humus
Rock
Litter
Im giving brainliest to the correct answer
Answer:
The weathering of Rocks
Explanation:
C
of the following which element is the heaviest? helium argon lithium aluminum
Answer:
Lithium
Explanation:
it is the only metal listed.
Which choice is not an example of a molecule?
Which of the following molecules has a trigonal planar shape?
Answer:
BF 3
Explanation:
The geometry of the BF 3 molecule is called trigonal planar The fluorine atoms are positioned at the vertices of an equilateral triangle. The F-B-F angle is 120° and all four atoms lie in the same plane.
Answer:
BF3
Explanation:
A p ex
Diffusion of Ammonia in an Aqueous Solution. An ammonia (A)-water (B) solution at 278 K and 4.0 mm thick is in contact at one surface with an organic liquid at this interface. The concentration of ammonia in the organic phase is held constant and is such that the equilibrium concentration of ammonia in the water at this surface is 2.0 wt 'Yo ammonia (density of aqueous solution is 991.7 kg/m3) and the concentration of ammonia in water at the other end of the film 4.0 mm away is 10 wt % (density of 961.7 kg/m3). Water and the organic are insoluble in each other. The diffusion coefficient ofNH3 in water is 1.24 x 10- 9 m 2/sCalculate the flux N_B. Explain.
Answer:
The Flux N_B = 0
Explanation:
So, we are given the following set of data or parameters which is going to help in solving this particular Question. So, let us take each at a time;
=> "An ammonia (A)-water (B) solution at 278 K and 4.0 mm thick is in contact at one surface with an organic liquid at this interface."
=>" 2.0 wt 'Yo ammonia (density of aqueous solution is 991.7 kg/m3) and the concentration of ammonia in water at the other end of the film 4.0 mm away is 10 wt % (density of 961.7 kg/m3). ''
With the information above, we can determine the N_A(which the question did not specify that we should calculate).
For the value of N_B, it will be equals to zero(0) because the insolubility of water in organic solvent.
When a liquid freezes it’s particles get what?
When a liquid is cooled, the average energy of the molecules decreases. At some point, the amount of heat removed is great enough that the attractive forces between molecules draw the molecules close together, and the liquid freezes to a solid.
Its particles no longer have enough energy to overcome the force of attraction between them.hope this help!
Plz help! The best answer will be marked as brainliest!
Make a funny sentence for the beneficial or great uses of magnesium
Here is an example for Mercury, it HAS to for Magnesium
¨I have a long history of use in fluorescent lighting so I can light up any room ¨
I heard Magnesium and Oxygen were going out.
So I was like, "OMg!"
The image represents a(n)
A) ion of xenon.
B) atom of xenon.
C) molecule of xenon.
D) compound containing xenon.
Answer:
B) atom of Xenon
Explanation:
Xenon is already stable alone, because it has a complete octet, or 8 electrons. This graph is not an ion because it shows xenon is its default state, consisting of 8 electrons.
It is not a molecule because a molecule is a group of atoms, or a compound, what is shown is a singular atom.
Earth Layers: describe each layer of makeup, location, and physical properties.be sure to include which layers are compositional and watch are mechanical
Answer:
Ok so the earth layers are
Crust, the surface of the earth
Mantle, where the lava usually comes from or how volcanos form due to the tectonic plates moving
outer core
inner core is the hottest
if you are asking for the compositional and mechanical layers that would be
Crust, mantle, core, Lithosphere, Asthenoshpere, Mesosphere, out core, and inner core
Mechanical: Lithosphere, Asthenosphere, mesosphere, outer and inner core
Compostional: Crust, Mantle, and core
which force is a noncontact force
Answer:
A magnet attracting metal
Which of the following is a clue that something is pseudoscience?
A
the presence of empirical evidence
B
the use of a famous athlete for support
C
the support of a respected scientist
D
the use of the scientific method
Pseudoscience has been the belief that are proportions that look scientific but are not. The use of the celebrated athlete for sponsorship is an example of pseudoscience. Thus, option B is correct.
What is pseudoscience?Pseudoscience has been defined as the claim and beliefs that are not testable and looks scientific but actually are not. They are the findings and propositions that can be considered scientific erroneously.
It includes subjective ideas and explanations based on various ideas and beliefs that are not proven scientifically. The use of an athlete for promotional and supporting a claim is an example of pseudoscience as the claim made is not proved scientifically but rather based on some famous person's statement.
Therefore, option B. the famous athlete for support is an example of pseudoscience.
Learn more about pseudoscience, here:
https://brainly.com/question/12257058
#SPJ2
Describe how gasoline, as a fuel, can undergo a chemical change.
Answer with Explanation:
A "chemical change" occurs when the structure of the molecules change. If there's no change in structure, it is called a "physical change." This also means that a chemical reaction has to occur for something to be considered a chemical change.
Gasoline when used as a fuel is being transformed into other forms of energy. It undergoes a process called "combustion."
When used as a fuel for cars, the gasoline is being burned to produce heat energy. This energy is then converted into mechanical energy that allows the car to move. Clearly, the gasoline has undergone a chemical change.
A lead fishing weight of 39.7g is submerged in a graduated cylinder of water containing 75.0mL of water. The water level will increase to what volume in the cylinder?
Answer:
78.5 mL
Explanation:
Step 1: Given data
Mass of the lead fishing weight: 39.7 g
Volume of water in the graduated cylinder: 75.0 mL
Step 2: Calculate the volume of the lead fishing weight
The density of lead is 11.34 g/mL.
39.7 g × (1 mL/11.34 g) = 3.50 mL
Step 3: Calculate to what volume will increase the water level
The final volume of water will be equal to its initial value plus the volume displaced by the lead fishing weight.
V = 75.0 mL + 3.50 mL = 78.5 mL
How would you obtain ethanol from rice starch?
Answer:
By putting the rice in water
Explanation:
if a baseball player hits a baseball from 4 feet off the ground with an initial velocity of 64 feet per second, how long will it take the baseball to hit the ground? use the equation h= -16t^2+4t + 4 round your answer to the nearest tenth hundredth
Answer:
4.06
Explanation:
what happens to the particles of a substance as it's temperature increases
PLES help me for brainless
Answer:
a 1 doesn't belong
Explanation:
Gas has fast moving molecules.
Liquids have slow moving molecules.
Solids have vibrating molecules.
Observe the nature changing around your home. You can observe plants, animals, and parts of your actual home as you begin to notice changes in matter. Collect data for two examples of changes in matter. Use the Changes in Matter observation questions to determine if your examples are physical or chemical changes.
Your answer should include two examples, the types of changes observed, and evidence of how the examples were formed. You can use this format:
Example 1:
Type of Change:
Evidence:
Answer:
Example 1. One change I observed was when cooking, I needed to boil water. The water was later evaporated due to the increase of heat from the stove below the pot. Heat traveled and transferred from the stove to the pot then the water. This change is from liquid to gas.
Example 2. I was mixing sugar into my tea, the sugar dissolved into the tea. This is an example of dissolving a solid into a liquid. The tea took the properties of the sugar and turned the drink sweet.
Extra, taking a hot shower and steam leaves the shower. This change is of evaporation.
Explanation:
Hope this helps, even though it was late! <3 :)
Joe bought a roll of gray duct tape containing 5400 inches. If there are 5280 feet in a mile, how
many miles long is Joe's roll of duct tape?
Answer:
STANDARD: 0.085 mi, 450 ft, or 150 yds
METRIC: 0.137 km, 137.16 m, or 13716 cm
Explanation: