The table compares the number of electrons in two unknown neutral atoms.
Comparison of Electrons
Atom Number of Electrons
A9
D11
Use this information to determine the number of valence electrons in the atoms. Which of the following correctly compares the stability of the two atoms?
O Both are unreactive.
O Both are highly reactive.
OA is unreactive and D is reactive.
OA is reactive and D is unreactive.

Density Of A Nickel:-

8.902 (25°C)

Explanation of why does nickel have a high density:-

Nickel is the only element named after the devil. The name comes from the German word Kupfernickel, meaning "Old Nick's copper," a term used by German miners. They tried to remove copper from an ore that looked like copper ore, but they were unsuccessful. ... Nickel is also used in the manufacture of many other alloys.

Hope This has helped you, mark me as brainliest if it did..

4. True

5. The amplitude of the ripples decreases as the circumference of the circle increases.

A wave is a disturbance that moves energy from one place to another.

Radio waves, gamma-rays, visible light, and all the other parts of the electromagnetic spectrum are electromagnetic radiation. Electromagnetic radiation can be described in terms of a stream of mass-less particles, called photons, each travelling in a wave-like pattern at the speed of light. Hence, the statement is true.

As the disturbance moves outwards the energy it carries is spread over a larger and larger region called the wavefront. For example, the ripples in the water lie in a circle with an ever-increasing circumference. The amplitude of the ripples decreases as the circumference of the circle increases.

Learn more about the Electromagnetic wave here:

https://brainly.com/question/3101711

#SPJ1

Answer:

A

Explanation:

The answer to this question is A. Both ripening and spoiling are chemical reactions.

Spoiling is a chemical reaction because spoiled food has bad smell and taste and it changes colour too.

Ripening of fruits is a chemical change. For example the colour could change as well as the texture.

Answer:

option a) chemical reaction, chemical reaction.

Explanation:

Changes in which new substances with different properties are formed are called chemical changes. Cooking of food, burning of substances are chemical changes as entirely new substances are formed. Burning of a candle wax releases carbon dioxide and water vapour (new substances). in here ripening and spoiling is a change that cannot be reversed which makes it a chemical change.

The relation between the speed of impact and the dropping height is

[tex]\rm h =\dfrac{1}{2g}v^2[/tex]

It is defined as the speed of an object when it falls from a height  and makes an impact with the ground or any other object.

As the object is falling from the height , its velocity will be continuously changing

Assuming it has no initial velocity , u = 0

let the final velocity is  [tex]\rm v_f[/tex] = [tex]\rm \sqrt {2gh}[/tex]

the potential energy at the height  h as  mgh

the kinetic energy when it reaches the bottom as  [tex]\rm \dfrac{1}{2}mv^2[/tex]

As the energy is always conserved

 [tex]\rm mgh = \dfrac{1}{2}mv^2[/tex]

[tex]\rm h =\dfrac{1}{2g}v^2[/tex]

This is the relation between the speed of impact and the dropping height.

To know more about Speed of Impact

https://brainly.com/question/15339245

#SPJ1

Explanation:

The definition of a god is an image, person or thing that is worshiped, honored or believed to be all-powerful or the creator and ruler of the universe. An example of a god is Ganesha, a Hindu diety.

Answer:

A.  -10,000

Explanation:

When x approaches zero, the graph tells us that F(x) either becomes extremely large or extremely small.  The best answer is therefore A:  -10,000.  Best, because we aren't given the exact value of x, but clearly the other results require that x be greater than 1 or less than -1, which is far from zero.

The number of moles of hydrogen atoms contained in 1 mole of c6h12 is 12.

Hydrogen can be produced from various domestic resources such as fossil fuels, biomass, and the electrolysis of water by electricity. The environmental sustainability and energy efficiency of hydrogen depends on how hydrogen is produced.

Hydrogen is the simplest element. Each hydrogen atom has only one proton. Hydrogen is also the most abundant element in the universe. Stars like the Sun are mainly made of hydrogen. The sun is essentially a giant sphere of hydrogen and helium gas.

Some facts about hydrogen:

Fuel cell vehicles are very similar to traditional gasoline vehicles

Click here for more information on hydrogen atoms: https: //brainly.com/question/16847428

# SPJ10

Answer:

answer will be b

Explanation:

mole is given 0.20

you have to find mass so just convert it into mass

remember if you move away from mole you multiply and if you move towards mole you divide so

just multiply mole with molar mass of glucose

so

0.20×180 = 36 grams

simple keep learning.......

Answer:

habitat destruction I think

Explanation:

0.216 moles of gas can the container hold if a sealed container can hold 0.325 L of gas at 1.00 atm and 293 K.

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

PV=nRT, where n is the moles and R is the gas constant. Then divide the given mass by the number of moles to get molar mass.

Given data:

R = gas constant = 0.08206 L.atm / mol K  

T = temperature, Kelvin  

V=5 L

P = 1.05 atm

T = 296 K

Putting value in the given equation:

[tex]\frac{PV}{RT}=n[/tex]

[tex]n= \frac{1.05 atm\; X \;5 L}{ 0.08206 L.atm / mol K X 296 K}[/tex]

Moles = 0.216 moles

Hence, 0.216 moles of gas can the container hold if a sealed container can hold 0.325 L of gas at 1.00 atm and 293 K.

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ1

Answer:

0.014

Explanation:

Use the formula PV=nRT; there are calculators for it online as well.

The volume of the solution in mL needed to deliver 0.078 moles of glucose to the patient is 250mL.

The volume of a solution can be calculated by using the following formula:

Molarity = n/V

Where;

According to this question, an intravenous solution is noted as having a concentration of glucose equal to 0.312 M. The volume that will be needed is as follows:

volume = 0.078 moles ÷ 0.312M

volume = 0.25L = 250mL

Therefore, the volume of the solution in mL needed to deliver 0.078 moles of glucose to the patient is 250mL.

Learn more about volume at: https://brainly.com/question/20714769

#SPJ1

Answer:

4560 torr

Explanation:

PV = K

4 x 1.5 = k

k = 6

V = k / p

V = 6 / 1

V = 6

atm to torr = 1 to 760

760 x 6 = 4560

Answer:

4560 Torr

Explanation:

Boyle's Law

[tex]\sf P_1 \cdot V_1=P_2 \cdot V_2[/tex]

where:

Given:

Substituting the given values into the formula:

[tex]\implies \sf 1.5 \cdot 4=P_2 \cdot 1[/tex]

[tex]\implies \sf P_2=6\:atm[/tex]

To convert atm to Torr, multiply atm by 760:

[tex]\implies \sf P_2=6\cdot 760=4560\:Torr[/tex]

Based on consumption of fossil fuels today, It can be predicted Fossil Fuels will eventually be used up and a new energy developed to supply energy needs of the world.

Fossil fuels are made from decomposing plants and animals.

These fuels are found in the Earth's crust and contain carbon and hydrogen, which can be burned for energy.

Coal, oil, and natural gas are examples of fossil fuels.

Above given fossil fuels are expected to be used up and a new energy developed to supply energy needs of the world.

Therefore, Based on consumption of fossil fuels today, It can be predicted Fossil Fuels will eventually be used up and a new energy developed to supply energy needs of the world.

Learn more about Fossil Fuels here ;

https://brainly.com/question/1793470

#SPJ1

Answer:

B. Mixing a few teaspoons of salt into the water

Explanation:

Pure water doesn't contain any ions, therefore it cannot conduct electricity. Adding salt (NaCl) to the water causes the salt to ionize into Na⁺ and Cl⁻ ions, and the movement of the ions completes the circuit, causing the bulb to glow.

The thickness of the walls of each hollow lump of iron ore is: 0.295cm. This is determined using the knowledge of the Volume of a Hollow Sphere.

The formula for the Volume of a Hollow Sphere is give as:

Volume of a Hollow = 4/3 R³ – 4/3 r³

Step 1 - Find the apparent volume of 8cm diameter sphere including the wall the the hollow inside

V = 4/3 r³

V = (4/3) (8)³

V = (4/3) * (22/7) * 512

V = 2145.52cm³

Step 2 - Determine the mass of Gold required for the sphere to achieve the density of iron ore if the apparent volume is as given in Step 1 above.

Recall that Mass = Density * Volume

Mass = 5.15 *  2145.52

Mass = 11049.45

Step 3 - Find volume of gold based on mass calculated in Step 2 above

Recall that :

Volume = Mass/Density

Thus,

V = 11049.4/19.3

Thus, Volume = 572.51cm³

Step 4 - Find the width of the wall of a hollow sphere for the volume realized in step 3

Recall the initial formula:

Volume of a Hollow = 4/3 R³ – 4/3 r³

Thus, 572.51 = (4/3) (8³ - (8 - t)³)

572.51 = (4/3) *(22.7) *(8³ - (8 - t)³)

572.51 = (88/21) *(8³ - (8 - t)³)

Multiply both sides by 21 and we have

88 (512 - (8 - t)³) = 12,022.71

Simplify further
(8 - t)³ = 357.38

t = 0.9035cm

Learn more about Volume of a Hollow Sphere at:
https://brainly.com/question/15244746
#SPJ1

5 moles of MnO form from 5.0 mol Mn. Details about stoichiometry can be found below.

The number of moles of a substance can be calculated stoichiometrically as follows:

According to this question, the following chemical equation is given as follows:

2Mn + O₂ → 2MnO

2 moles of Mn forms 2 moles of MnO

Hence, 5 moles of Mn will form 5 × 2/2 = 5 moles of MnO.

Therefore, 5 moles of MnO form from 5.0 mol Mn.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Answer: 10.0

Explanation: i took the test

The molarity of the sodium ion in the solution is 0.450 M.

The molarity of the sodium ion in a solution can be determined by the dissociation of the given solution Na2SO4(sodium sulfate).

The dissociation of Na2SO4 is computed as follows:

i.e.

[tex]\mathbf{Na_2SO_4 \to 2Na^{+} + SO_4^{2-}}[/tex]

The molarity for sodium-ion [Na+] is:

= 2 × 0.225 M

= 0.450 M

Learn more about the molarity of a substance here:

https://brainly.com/question/10608366

#SPJ11

Answer:

The point at which the lines intersect represents the triple point.

Answer:

See below

Explanation:

The way to calculate this

  speed of light =  wavelength * frequency

   3 x 10 ^8 m/s   =   wavelength * 2450000000 Hz

       wavelength = .12245 meters

                    = 1.2245 x 10^-1  Meters  

The wavelength of a microwave with a frequency of 2450 mhz is 1.2245 x 10⁻¹ meters.

The wavelength is the time period or spatial period between the periodic wave and the distance between two waves. A microwave is a form of electromagnetic radiation.

The frequency of a microwave, f = 2450 MHz

We need to find the wavelength and the period of the microwaves

c = f λ

c = speed of light = 3 x 10 m/sec. 8 c = λf where λ = wavelength, f = frequency. Length

The relation between the wavelength and frequency is given by

The speed of light =  wavelength x frequency

3 x 10⁸ m/s   =   wavelength x 24500 Hz

Wavelength = .12245 meters

1.2245 x 10⁻¹  Meters  

Therefore, the wavelength of a microwave with a frequency of 2450 MHz is 1.2245 x 10⁻¹ meters.

To learn more about wavelength, refer to the link:

https://brainly.com/question/13091031

#SPJ5

The 3 common gases that give off reactions are Hydrogen sulfide, Carbon monoxide, Nitrogen oxides.

Off reactions are defined as chemical reactions that occurs when something burns or during combustion of materials which gives off energy.

Some gases that give off reaction are:

Note that these gases are mostly poisonous.

Therefore, the 3 common gases that give off reactions are Hydrogen sulfide, Carbon monoxide, Nitrogen oxides.

Learn more about off reactions here:

https://brainly.com/question/16416932

#SPJ12

3531.23 J is the energy used to heat tin when 229.2 g of tin was heated from 46.3 to 115.7°C.

The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases by 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).

Q=mcΔT

Give data:

m=229.2 g

c=0.222 J/g x °C

ΔT=115.7°C - 46.3°C

ΔT= 69.4 °C

Putting value in the equation:

Q=mcΔT

Q=229.2 g x 0.222 J/g°C x 69.4 °C

Q= 3531.23 J

Hence, 3531.23 J is the energy used to heat tin.

Learn more about the specific heat capacity here:

https://brainly.com/question/27919379

#SPJ1

Answer:

Explanation:

Using Intersecting Chords Theorem,

AB × CB = BE × BD

A is the initial reaction when a chlorine bond splits into two chlorine radicals.

In chemistry, a radical is an atom, molecule, or ion that has an unpaired valence electron.

The question is based on Radical Chain Reaction. And these reactions have three different phases: Initiation, Propagation and Termination.

Reaction A- Initiation

Reaction B- Termination

Reaction C- propagation

Learn more about the radicals here:

https://brainly.com/question/1369233

#SPJ1

Answer:

chemical reactions In our daily environment are

1) Cooking food

2) Photosynthesis

3) rusting

4) painting

5) respiration

6) combustion

7) Electrochemistry (including chemical batteries)

8)Digestion

9)Soap and detergent reactions

10)Acid-base reactions

11) fermentation

12) oxidation

13 ) burning of paper

14) riping of fruits

15) frying egg

16) souring of milk

17) baking

18) heating sugar

19) burning wood

20) rising bread

0.5 moles of ethanoic acid are required to produce 0.5 mol of the ester , Option B is the right answer.

The reaction in which a carboxylic acid combine with an alcohol to form ester and water is called esterification reaction.

It is given in the question that

Ethanoic acid reacts with ethanol to form an ester and water

C₂H₅OH  +  CH₃​COOH  →   CH₃COOH  +  H₂O

The moles of ethanoic acid required to produce 0.5 mole of ester.

In the following reaction it can be seen that the mole fraction of ethanoic acid to ester is 1: 1

Therefore 0.5 mole of ethanoic acid will be required to produce 0.5 mol of ester.

To know more about Esterification Reaction

https://brainly.com/question/10391293

#SPJ1

When the potato is put into the distilled water, it will absorb the water. The water is trying to dilute the salt inside the potato.

What is the meaning of concentrated?

The concentration of a solution is a measure of the amount of solute that has been dissolved in a given amount of solvent or solution.

When the potato is put into the distilled water, it will absorb the water. The water is trying to dilute the salt inside the potato.

Since potatoes already contain sugar, less water will diffuse out of the potato placed in sugar water. The slice placed in water will be rigid since it will absorb water.

Learn more about the concentration here:

https://brainly.com/question/17242527

#SPJ1

Answer:

yes so for example one

Explanation:

yeah so

Answer:

It has protons, neutrons and electrons