The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.
The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula
Time = distance / speed
Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.
In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).
Plugging in these values into the formula, we get
Time = 89.5 m / 343 m/s
Time = 0.261 seconds
Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.
To know more about time here
https://brainly.com/question/22594054
#SPJ4
Describe the ways the reading addresses how some people use ""uncertainty"" as a way to undermine science:
The reading addresses how some people use "uncertainty" as a way to undermine science: by pointing out that these individuals often exploit the inherent limitations and ambiguities present in scientific research.
They tend to focus on the fact that scientific findings are often provisional, and conclusions can change with the introduction of new evidence or advancements in methodologies. By emphasizing the uncertainty aspect, they attempt to discredit or cast doubt on the overall credibility of scientific results.
Furthermore, these individuals may cherry-pick data or studies that support their preconceived beliefs, while ignoring the broader consensus within the scientific community. This selective presentation of evidence contributes to misinformation and public confusion about scientific issues, such as climate change or vaccinations.
In some cases, those who use uncertainty to undermine science may have ulterior motives, such as protecting vested interests or promoting a specific political or ideological agenda. By sowing doubt and mistrust in scientific findings, they can manipulate public opinion and obstruct the development or implementation of evidence-based policies.
To counteract these attempts to undermine science, it is essential for the scientific community and the public to recognize and appreciate the inherent uncertainties within the scientific process.
By fostering critical thinking, encouraging open and transparent communication, and supporting continued research and education, we can help build resilience against misinformation and promote a better understanding of the role of uncertainty in scientific progress.
To know more about scientific research, refer here:
https://brainly.com/question/30336884#
#SPJ11
An open steel can of volume 216 L
is filled to the top with gasoline at
13. 5°C. When it warms to
36. 0°C, how much gas spills
over? (Don't forget, both the can
and the gasoline are expanding. )
B = 36•10-6 C-1
a = 12•10-6 0-1
Iron or Steel
Gasoline
B = 950•10-6C-1
(Unit = L)
Because the gasoline expands more quickly than the steel can,4.44 L is the amount that will overflow
Define thermal expansion.
The propensity of matter to vary in volume in response to temperature changes is known as thermal expansion. A substance's particles move more when it is heated, maintaining a greater average separation. Thermosets experience linear thermal expansion since they are employed in solid form.
The phenomena known as thermal expansion can be seen in solids, liquids, and gases. An object or body expands during this process when heat (temperature) is applied. The term "thermal expansion" refers to an object's propensity to change its dimensions as a result of heat, including length, density, area, and volume.
volume 216 L
Temperature T1 is 13. 5°C, T2 is 36. 0°C
T will be 22.5 K
Amount of gasoline that overflows:
9.14 x 10(-6)/K *V*T^2
9.14 x 10(-6)/K x 216 L x 22.5 K x 22.5 K = 4.44 L
To learn more about thermal expansion :
https://brainly.com/question/15320204
#SPJ4
Which list shows the correct order of processes that occur before and during ovulation?
egg released from ovary Right arrow. Hormones send signal Right arrow. Egg travels to fallopian tube
egg travels to fallopian tube Right arrow. Egg is released from ovary Right arrow. Hormones send signal
hormones send signal Right arrow. Egg travels to fallopian tube Right arrow. Egg released from ovary
hormones send signal Right arrow. Egg released from ovary Right arrow. Egg travels to fallopian tube
Hormones send signal → Egg released from ovary → Egg travels to fallopian tube.
Hormones send signal: The process of ovulation is triggered by hormonal signals. In the female reproductive system, the pituitary gland releases follicle-stimulating hormone (FSH) and luteinizing hormone (LH) in response to the signals from the hypothalamus. These hormones play a crucial role in the maturation of ovarian follicles and the release of an egg from the ovary.
Egg is released from the ovary: Once the hormonal signals are received, the dominant ovarian follicle (containing a developing egg) reaches maturity.
The surge in luteinizing hormone (LH) triggers the release of the egg from the ovary. This is known as ovulation. The released egg is then available for potential fertilization.
Egg travels to the fallopian tube: After ovulation, the released egg, also known as the ovum or oocyte, travels through the fallopian tube. The fallopian tubes, also called uterine tubes, are structures that connect the ovaries to the uterus.
The fallopian tubes have finger-like projections called fimbriae that help capture the released egg and guide it into the tube.
In summary, the correct order of processes before and during ovulation is as follows:
Hormones send signal
Egg is released from the ovary
Egg travels to the fallopian tube
These processes are essential for successful reproduction in females and are part of the menstrual cycle.
To learn more about fallopian, refer below:
https://brainly.com/question/3477462
#SPJ11
Answer:
d
Explanation:
edge
What was King Louis XVI's goal for Jacques-Louis David's Oath of the Horatil, 1784
1) to send a moral message
2) to educate the public about antiquity
3) to discourage a revolution
4) to decorate his palace
Number 3 is wrong
mary is an avid game show fan and one of the contestants on a popular game show. she spins the wheel, and after 5.5 revolutions, the wheel comes to rest on a space that has a $1500 value prize. if the initial angular speed of the wheel is 3.35 rad/s, find the angle through which the wheel has turned when the angular speed reaches
The angle through which the wheel has turned when the angular speed reaches 0 is 5.60 radians.
To find the angle through which the wheel has turned when the angular speed reaches a certain value, we can use the formula for angular displacement. Angular displacement is the change in the angle of rotation of an object and is measured in radians.
The formula for angular displacement is given by:
θ = ω*t + (1/2)αt^2
where θ is the angular displacement in radians, ω is the initial angular speed in radians per second, α is the angular acceleration in radians per second squared, and t is the time in seconds.
In this problem, we need to find the angle through which the wheel has turned when the angular speed reaches some value. Let's call this final angular speed ω₁. We can set up two equations using the given information and the formula for angular displacement:
5.5 revolutions = 5.5*2π radians = 34.56 radians
θ = 34.56 radians - 0 radians (initial position)
θ = ω*t + (1/2)αt^2
At the point where the wheel comes to rest, ω₁ = 0, so we can solve for the time t it takes for the wheel to come to rest:
ω₁ = ω + α*t
0 = 3.35 rad/s + α*t
t = -3.35/α
Substituting this expression for t into the equation for angular displacement, we get:
θ = ω*(-3.35/α) + (1/2)α(-3.35/α)^2
Simplifying, we get:
θ = -3.35*(3.35/α) + (1/2)*3.35^2/α
θ = -11.2225/α + 5.625
Now we can use the fact that the final prize value is $1500 to solve for the angular acceleration α:
$1500 = (1/2)Iω_f^2
The moment of inertia I for a disc is (1/2)mr^2, where m is the mass and r is the radius. We can assume a reasonable value for the radius of the wheel, say 0.3 meters, and the mass of the wheel is not given, so we will leave it as a variable m:
$1500 = (1/2)(1/2)m(0.3)^2(0)^2
Solving for m, we get:
m = 6666.67 kg
The angular acceleration can be found using the formula:
α = (τ/I)
where τ is the torque and I is the moment of inertia.
The torque τ can be found using the formula:
τ = r*F
where r is the radius and F is the force.
We can assume a reasonable force, say 100 N:
τ = 0.3100 = 30 Nm
Substituting the values for moment of inertia and torque, we get:
α = (30/((1/2)m(0.3)^2))
α = 139.87 rad/s^2
Now we can substitute this value for α into the equation for angular displacement to get:
θ = -11.2225/139.87 + 5.625
θ = 5.60 radians
To learn more about wheel click on,
https://brainly.com/question/13891016
#SPJ4
a. Calculate the gravitational force between two objects of mass 25 kg and 20 kg separated by a distance of 5 m. (1.33 × JO⁹N) 1030 1.
Answer:
The gravitational force between two objects of mass 25 kg and 20 kg separated by a distance of 5 m is [tex]1.334 * 10^-9[/tex]
Explanation:
Given
Mass of the body (MA)= 25kg
Mass of the other body (MB)= 20kg
Distance of separation between them (R)= 5m
We know that
The gravitational force between two masses
[tex]F= (G*MA*MB)/R^2[/tex] N
where
[tex]G=6.67 * 10^-11 m^3 kg^-1 s^-2[/tex]
Putting all the values in the above formula,
[tex]F=(6.67*10^-11 *25*20)/5*5[/tex] N
[tex]F=1.33*10^-9 N[/tex]
To learn more about Gravity among two bodies
https://brainly.in/question/29339927#:~:text=Answer%3A,the%20distance%20between%20their%20centers.
Q1) The molar specific heat of a diatomic gas is measured at constant volume and found to be 29. 1 J/mol. K. The types of energy that are contributing to the molar specific heat are: (a) translation only (b) translation and rotation only (c) translation and vibration only (d) translation, rotation, and vibration. And why?
The molar specific heat of a diatomic gas measured at constant volume and found to be 29.1 J/mol·K indicates that the types of energy contributing to the molar specific heat are: (b) translation and rotation only.
This is because diatomic molecules have 5 degrees of freedom: 3 translational and 2 rotational. The molar specific heat at constant volume (Cv) can be calculated using the formula Cv = (f/2)R, where f is the degrees of freedom and R is the gas constant (8.314 J/mol·K).
For diatomic molecules with 5 degrees of freedom, Cv = (5/2)R = 20.785 J/mol·K. However, given the value of 29.1 J/mol·K, it is close to the expected value of (7/2)R = 29.09 J/mol·K, which represents the 3 translational and 2 rotational degrees of freedom without including vibrational energy.
Thus, only translation and rotation are contributing to the molar specific heat in this case.
To learn more about energy, refer below:
https://brainly.com/question/1932868
#SPJ11
Name these lonic Compounds using the "Periodic Table of Food":
1. BPo
2. Bl2Tu
3. Cr2Sn
4. LiSr2
5. Or3
6. Ba2
The name of lonic Compounds are 1. BPo - Boron Phosphorus , 2. Bl₂Tu - Bismuth Tin , 3. Cr₂Sn - Chromium Tin , 4. LiSr₂ - Lithium Strontium, 5. Or₃ - Oxygen Ruthenium , 6. Ba₂ - Barium.
What is lonic Compound?Lonic compounds are organic compounds that contain both a cation and an anion in the same molecule. They are also known as ionic salts, or simply salts. The cation is typically a metal, and the anion is typically a polyatomic ion, such as a nitrate, sulfate, or carbonate. Lonic compounds are formed when a metal cation reacts with a polyatomic anion, resulting in an exchange of electrons. These compounds are common in nature, and they are important in many industrial processes. They are also the basis of many pharmaceuticals and consumer products. In addition to their industrial uses, lonic compounds are also used in medicine, to treat a wide variety of conditions.
To learn more about lonic Compound
https://brainly.com/question/14089971
#SPJ4
yalll pls help 20 points ) How is BMI weight calculated?
Responses
Divide weight by 678.
Double weight.
Subtract weight from heart rate.
Multiply weight by 703.
How to find Vdsq from Vdst? How did they find the value of 7 for Vdsq?
Vdst and Vdsq are different measurements of the voltage drop across the drain-source terminals of a MOSFET transistor, and to find Vdsq from Vdst, we need to measure Vdst and use a formula that takes into account Vgs and Vth.
To understand how to find Vdsq from Vdst, we need to first understand what these terms represent.
Vdst is the voltage drop across the drain-source terminals of a MOSFET transistor when it is in its ON state. This voltage drop is caused by the current flowing through the transistor, and it is a dynamic value that changes as the current changes.
Vdsq, on the other hand, is the voltage drop across the drain-source terminals of a MOSFET transistor when it is in its steady-state or quiescent state. This voltage drop is caused by the biasing of the transistor and is a static value that remains constant as long as the biasing conditions remain the same.
To find Vdsq from Vdst, we need to first measure the value of Vdst while the transistor is in its ON state. This can be done using a multimeter or an oscilloscope. Once we have the value of Vdst, we can then calculate Vdsq using the following formula:
Vdsq = Vdst + Vgs - Vth
where Vgs is the voltage applied to the gate of the transistor and Vth is the threshold voltage of the transistor.
As for how the value of 7 for Vdsq was found, it is impossible to say without more context. It could have been calculated using the formula above, or it could have been measured using experimental methods.
To learn more about transistors
https://brainly.com/question/31052620
#SPJ4
If the current in a circuit is 3. 2 mA and the resistance of the wire used in the circuit is 250 Ω, what is the voltage of the fuel cell being used?
Formula;
Calculation;
Answer:
If the current in a circuit is 3. 2 mA and the resistance of the wire used in the circuit is 250 Ω, the voltage of the fuel cell being used in the circuit is 0.8 volts.
To calculate the voltage of the fuel cell being used in a circuit, we can use Ohm's law, which states that the voltage (V) equals the current (I) multiplied by the resistance (R): V = I x R.
In this case, the current is 3.2 mA (milliamperes), and the resistance of the wire used in the circuit is 250 Ω (ohms). We first need to convert the current to amperes by dividing it by 1000: 3.2 mA ÷ 1000 = 0.0032 A.
Next, we can substitute these values into the formula to calculate the voltage: [tex]V = 0.0032 \;A \times 250 \;\Omega = 0.8 \;volts.[/tex]
Therefore, the voltage of the fuel cell being used in the circuit is 0.8 volts.
In summary, to calculate the voltage of a fuel cell being used in a circuit, we can use Ohm's law, which states that voltage equals current multiplied by resistance.
By converting the current from milliamperes to amperes and substituting the values into the formula, we can determine the voltage of the fuel cell in volts.
To know more about resistance refer here:
https://brainly.com/question/30155623#
#SPJ11
When a single neutron hits a Uranium-235 atom, a chain reaction can occur, releasing a huge amount of energy. When a single neutron slams into a Uranium-235 atom, the Uranium-235 decays into Barium-141, Krypton-92, and an amount of neutrons
When a single neutron hits a Uranium-235 atom, a chain reaction can occur, releasing a huge amount of energy, this process, known as nuclear fission, occurs when the Uranium-235 atom absorbs the neutron and becomes unstable.
As a result, the unstable Uranium-235 atom decays into smaller elements, specifically Barium-141 and Krypton-92. In addition to these two elements, a certain number of neutrons are also released during the decay process.
These newly released neutrons can go on to collide with other Uranium-235 atoms, perpetuating the chain reaction and leading to the release of a massive amount of energy. This phenomenon is the basis for nuclear power generation and atomic weapons.
To know more about nuclear fission, refer here:
https://brainly.com/question/29541275#
#SPJ11
QUESTION 2
A model airplane with mass, m = 0. 50 kg is tethered by a wire so that it flies in a circle 0. 20 m in radius. The airplane engine provides a net thrust of
0. 6 N perpendicular to tethering wire. Find the angular acceleration of the airplane when it is level flight. (Take moment of inertia I = mr2
O a.
12. 6 rad/ s2
Ob. 0. 58 rad/s2
Oc.
5. 08 rad/ s
od 6 rad/s?
The net force acting on the airplane is the centripetal force required to keep the airplane moving in a circular path. The angular acceleration of the airplane is 12.25 [tex]rad/s^2.[/tex]
The centripetal force is given by:
[tex]F = m * a_c[/tex]
where
F is the net force,
m is the mass of the airplane, and
[tex]a_c[/tex] is the centripetal acceleration.
The centripetal acceleration is given by:
[tex]a_c = v^2 / r[/tex]
where
v is the speed of the airplane and
r is the radius of the circle.
Since the airplane is in level flight, the net thrust of the engine is perpendicular to the tethering wire.
Therefore, it does not contribute to the centripetal force. The centripetal force is provided by the tension in the wire.
The tension in the wire is given by:
[tex]T = F_c = m * a_c[/tex]
where [tex]F_c[/tex] is the centripetal force.
The angular acceleration of the airplane is given by:
[tex]\alpha = a_c / r[/tex]
Substituting the values given:
[tex]F_c = m * a_c[/tex]
= T = 0.6 N
[tex]a_c = v^2 / r[/tex]
[tex]0.6 N = m * v^2 / r[/tex]
[tex]v^2 = F_c * r / m[/tex]
[tex]v = \sqrt{ (F_c * r / m)[/tex]
[tex]=\sqrt{(0.6 N * 0.2 m / 0.5 kg)[/tex]
= 0.49 m/s
[tex]a_c = v^2 / r[/tex]
= 0.49 m/s / 0.2 m
= 2.45 [tex]m/s^2[/tex]
[tex]\alpha = a_c / r[/tex]
[tex]= 2.45 m/s^2 / 0.2 m[/tex]
= 12.25 [tex]rad/s^2[/tex]
Therefore, the angular acceleration of the airplane is 12.25 [tex]rad/s^2.[/tex]
To know more about centripetal force refer here
brainly.com/question/14249440#
#SPJ11
A toy car has a 1. 5-a current, and its resistance is 2. How much voltage does the car require? v.
The voltage required by the toy car is 3 volts.
Ohm's Law states that the voltage (V) across a resistor is equal to the product of the current (I) flowing through it and the resistance (R). Mathematically, it can be expressed as:
V = I * R
In this case, we are given that the current (I) flowing through the toy car is 1.5 A (amperes), and the resistance (R) of the car is 2 Ω (ohms).
Substituting these values into the equation, we can calculate the voltage (V) required by the car:
V = 1.5 A * 2 Ω
V = 3 V
So, the voltage required by the toy car is 3 volts. This means that to operate the toy car properly, a power source or battery with a voltage output of 3 volts is needed.
The voltage provides the electrical potential necessary for the current to flow through the car's circuit, overcoming the resistance and powering the car's motor or other components.
To know more about voltage refer here
brainly.com/question/32002804#
#SPJ11
A researcher wants to investigate the relationship between pressure and temperature in carbon dioxide gas (CO 2 ) by using a pressure sensor on an airtight flask
In Step 1 of the investigation, the student adds CO 2 to the flask at 20 degrees*c
A. Step 2: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure. Step 3: Repeat with different sizes of flasks to account for volume.
B. Step 2: Keep the volume of the flask constant. Step 3 Turn on the hot plate to increase the temperature of the gas and record the resulting pressure.
A. Step 2: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure. Step 3: Repeat with different sizes of flasks to account for volume.
D. Step 2 : Keep the volume of the flask constant. Step 3: Turn on the hot plate to increase the temperature of the gas and record the resulting pressure.
Which steps should the student next and what would be the expected results?
Choice A
Choice B
Choice C
Choice D
The correct answer is D. The next step for the student should be to keep the volume of the flask constant and turn on the hot plate to increase the temperature of the gas while recording the resulting pressure.
By keeping the volume of the flask constant, the student can isolate the effect of temperature on the pressure of C02 gas. This will allow them to accurately investigate the relationship between pressure and temperature.
The expected result is that as the temperature of the gas increases, the pressure will also increase due to the direct relationship between pressure and temperature in gases, as described by the gas laws( PV=nRT). By keeping the volume of the flask constant, the student can ensure that any changes in pressure are solely due to changes in temperature.
As the temperature of the gas increases, the gas molecules move faster and collide with the walls of the flask more frequently and with greater force, leading to an increase in pressure.
To know more about the volume, click here;
https://brainly.com/question/23409099
#SPJ11
The speed of light in a certain medium is 2. 2 × 108 m/s. What is the index of refraction of this medium?
The index of refraction of this medium is 1.36. The index of refraction (n) of a medium is the ratio of the speed of light in vacuum (c) to the speed of light in the medium (v): n = c/v
Given the speed of light in the medium as 2.2 × 10^8 m/s, we can calculate the index of refraction as: n = c/v = (3.0 × 10^8 m/s) / (2.2 × 10^8 m/s) = 1.36
Therefore, the index of refraction of this medium is 1.36. This indicates that light travels slower in this medium compared to a vacuum and is bent when it enters the medium at an angle, a phenomenon called refraction.
To know more about index of refraction, refer here:
https://brainly.com/question/31106652#
#SPJ11
Assume you are performing the calibration step of experiment 8 and you begin with 60 g of water at 20 oc and 60 g of water at 80 oc. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment, you determine the temperature of the mixed portions of water to be 45 oc. What is the heat capacity of the calorimeter?.
To determine the heat capacity of the calorimeter, we can use the principle of heat transfer and the equation:
q = m * c * ΔT,
where:
q is the heat transferred,
m is the mass of the water,
c is the specific heat capacity of water, and
ΔT is the change in temperature.
In this case, we have two portions of water with masses of 60 g each, mixed together, and the resulting temperature is 45°C.
Let's calculate the heat transferred for each portion of water:
q1 = m1 * c * ΔT1,
q2 = m2 * c * ΔT2,
where:
m1 = 60 g (mass of water at 20°C),
m2 = 60 g (mass of water at 80°C),
c = specific heat capacity of water (approximately 4.18 J/g°C), and
ΔT1 = 45°C - 20°C,
ΔT2 = 45°C - 80°C.
Now, let's calculate the heat transferred for each portion of water:
q1 = 60 g * 4.18 J/g°C * (45°C - 20°C),
q2 = 60 g * 4.18 J/g°C * (45°C - 80°C).
The total heat transferred in the calorimeter setup is the sum of the heat transferred for each portion of water:
q_total = q1 + q2.
Since the heat transferred in the calorimeter is equal to the negative of the heat transferred by the water (q_total = -q_calorimeter), we can write:
-q_calorimeter = q_total.
Therefore, the heat capacity of the calorimeter (C_calorimeter) can be calculated as:
C_calorimeter = -q_calorimeter / ΔT_total,
where ΔT_total is the change in temperature of the combined water portions.
Substituting the calculated values into the equation will give you the heat capacity of the calorimeter.
To know more about calorimeter refer here
https://brainly.com/question/799930#
#SPJ11
PLEASE HELP
There is a thought experiment about the law of large numbers and the finite combinations of letters in the english language that suggests that a room of primates banging away on typewriters will eventually produce the entire collected works of William Shakespeare. For an art installation you assemble just such a room, but noise ordinance states that you canât exceed 90 dB on this block. If you find that a single typewriter and monkey workstation has a relative intensity of 76 dB, what is the intensity of a single station and how many monkey-typewriter stations can you set up?
The relative intensity of a single monkey-typewriter station is given as 76 dB, and the noise ordinance limits the overall sound intensity to 90 dB.
The sound intensity is proportional to the number of stations, so we can use a logarithmic equation to determine the maximum number of stations:
[tex]I1/I2 = (d1/d2)^2[/tex]
where I1 is the desired overall sound intensity (90 dB), I2 is the intensity of a single station (unknown), d1 is the maximum distance from the installation at which the sound level must be below the limit (let's say 10 meters), and d2 is the distance from the installation to a single station (also unknown).
Solving for I2, we get:
[tex]I2 = I1 \times (d2/d1)^2 = 76 dB \times (10 m / d2)^2[/tex]
To determine the maximum number of stations, we can set I2 to the maximum allowable intensity (90 dB) and solve for d2:
[tex]90 dB = 76 dB \times (10 m / d2)^2[/tex]
[tex]d2 = \sqrt{[(76\; dB \times 10 m^2) / 90\; dB]} = 3.27 meters[/tex]
Therefore, each station must be at least 3.27 meters apart from each other to ensure that the overall sound intensity does not exceed 90 dB.
In summary, we can use the logarithmic equation for sound intensity to determine the maximum number of monkey-typewriter stations that can be set up in a room without exceeding a noise ordinance of 90 dB. We found that each station must be at least 3.27 meters apart from each other to ensure compliance.
To know more about sound intensity refer here:
https://brainly.com/question/30546291#
#SPJ11
A 1. 5 V battery is connected to a 1,000 μF capacitor in series with a 150 Ω resistor. A. What is the maximum current that flows through the resistor during charging? b. What is the maximum charge on the capacitor? c. How long does the capacitor take to reach a potential of 1. 0V?
The maximum current across the resistor is 0.01 amps.
The capacitor can hold a maximum charge of 1500 C.
It takes 0.15 seconds for the capacitor to reach.
a) The maximum current that flows through the resistor during charging can be calculated using the formula I = V/R, where V is the voltage of the battery and R is the resistance of the circuit. Therefore, I = 1.5V / 150Ω = 0.01 A.
b) The maximum charge on the capacitor can be calculated using the formula Q = CV, where C is the capacitance of the capacitor and V is the maximum voltage across the capacitor during charging. Therefore, Q = (1000 μF) * (1.5V) = 1500 μC.
c) The time it takes for the capacitor to reach a potential of 1.0V can be calculated using the formula t = RC, where R is the resistance of the circuit and C is the capacitance of the capacitor. Therefore, t = (150Ω) * (1000 μF) = 0.15 s.
To know more about the Capacitor, here
https://brainly.com/question/31064008
#SPJ4
-Which phase of the Moon occurs when the Earth is located directly between the Moon and the Sun?
-New moon
-First quarter
-Full moon
-Last quarter
pls help
Answer: new moon
Explanation:
Calculate the magnitude of the electrostatic force between a + 8. 0μC charged particle and a + 9. 0μC charged particle separated by 0. 5 cm.
(Hint: μ is 10-6 and c is 10-2)
The magnitude of the electrostatic force between the two charged particles is 2.59 * 10^4 N.
To calculate the magnitude of the electrostatic force between the two charged particles, we can use Coulomb's law which states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
So, the formula to calculate the electrostatic force between two charged particles is:
F = (k * q1 * q2) / r^2
where F is the electrostatic force, k is Coulomb's constant (9 * 10^9 N*m^2/C^2), q1 and q2 are the charges of the two particles and r is the distance between them.
In this case, q1 = +8.0 μC = +8.0 * 10^-6 C, q2 = +9.0 μC = +9.0 * 10^-6 C, and r = 0.5 cm = 0.5 * 10^-2 m.
Substituting these values into the formula, we get:
F = (9 * 10^9 * 8.0 * 10^-6 * 9.0 * 10^-6) / (0.5 * 10^-2)^2
F = 2.59 * 10^4 N
To know more about, electrostatic force, click here;
https://brainly.com/question/9774180
#SPJ11
A wheel of diameter 40. 0 cm starts from rest and rotates with a constant angular acceleration of 4rpm. At the instant the wheel has computed its second revolution, compute the radial acceleration of a point on the rim in two ways: (a) using the relationship a_rad = w^2r and (b) from the relationship a_rad = v^2/r
(a) Using a_rad = [tex]\omega^{2r[/tex]: Approximately 100.53 m/s²
(b) Using a_rad = [tex]v^{2/r[/tex]: Approximately 31.42 m/s²
To solve the problem, let's first convert the angular acceleration from revolutions per minute (rpm) to radians per second squared (rad/s²):
Given:
Diameter of the wheel (D) = 40.0 cm
Radius of the wheel (r) = D/2 = 20.0 cm = 0.20 m
Angular acceleration (α) = 4 rpm
(a) Using the relationship a_rad = [tex]\omega^{2r[/tex]:
The angular acceleration (α) can be converted to angular velocity (ω) using the formula:
ω = αt, where t is the time taken to complete two revolutions.
Since the wheel starts from rest, the time taken to complete two revolutions is given by:
t = (2 rev) / (4 rpm) = 0.5 min = 30 s
Now we can calculate the angular velocity (ω):
ω = αt = (4 rpm) × (2π rad/1 min) × (1 min/60 s) × (30 s) = 4π rad/s
Using the relationship a_rad = [tex]\omega^{2r[/tex], we can calculate the radial acceleration:
a_rad = [tex]\omega^{2r[/tex] = (4π rad/s)² × 0.20 m
a_rad = 16π² × 0.20 m ≈ 100.53 m/s²
Therefore, the radial acceleration of a point on the rim, calculated using a_rad = [tex]\omega^{2r[/tex], is approximately 100.53 m/s².
(b) Using the relationship a_rad = [tex]v^{2/r[/tex]:
The wheel starts from rest, so its initial linear velocity (v) is zero.
The final linear velocity (v) can be calculated using the formula:
v = ωr
The time taken to complete two revolutions is already calculated as 30 seconds, so we can find the final angular velocity (ω) as follows:
ω = αt = 4π rad/s (same as before)
Now we can calculate the final linear velocity (v):
v = ωr = (4π rad/s) × 0.20 m ≈ 2.513 m/s
Using the relationship a_rad = [tex]v^{2/r[/tex], we can calculate the radial acceleration:
a_rad = [tex]v^{2/r[/tex] = (2.513 m/s)² / 0.20 m
a_rad ≈ 31.42 m/s²
Therefore, the radial acceleration of a point on the rim, calculated using a_rad = [tex]v^{2/r[/tex], is approximately 31.42 m/s².
To know more about angular acceleration refer here
https://brainly.com/question/30237820#
#SPJ11
A person gets their 800 kg car stuck in a rut, then spend the remaining 4 hours of the afternoon trying to push the car out of the rut. How much work did the person do over those 4 hours?
To calculate the amount of work done, we need to know the force exerted by the person and the distance the car was moved. Work is calculated using the formula: Work = Force × Distance. Without the information about the force exerted and the distance the car was moved, it is not possible to determine the exact amount of work done by the person over the 4 hours spent pushing the 800 kg car.
Visit https://brainly.com/question/18094932 to know more about Work.
#SPJ11
A gas has a temperature of 14 °C, and a volume of 4. 5 L. If the temperature is raised to 29 °C and the pressure is not changed, what is the new volume of the gas? A. 4. 7 L B. 4. 9 L C. 5. 3 L D. 5. 5 L
The new volume of the gas when the temperature is raised to 29°C and the pressure is not changed is approximately :4.73 L. The correct option is A.
To determine the new volume of a gas when its temperature is changed, we can use Charles' Law. Charles' Law states that the volume of a gas is directly proportional to its temperature, provided that the pressure remains constant. Your initial temperature (T1) is 14°C, and the initial volume (V1) is 4.5 L.
The final temperature (T2) is 29°C, and we need to find the new volume (V2). Remember to convert the temperatures from Celsius to Kelvin by adding 273.15 to each value (T1 = 287.15 K, T2 = 302.15 K).
Using Charles' Law, we have:
V1/T1 = V2/T2
Now, we can plug in the values:
(4.5 L)/(287.15 K) = V2/(302.15 K)
To find V2, multiply both sides by 302.15 K:
V2 = (4.5 L x 302.15 K) / 287.15 K
V2 ≈ 4.73 L
The new volume of the gas when the temperature is raised to 29°C and the pressure is not changed is approximately 4.73 L. The correct option is A.
To know more about temperature, refer here:
https://brainly.com/question/13694966#
#SPJ11
Complete question:
A gas has a temperature of 14 °C, and a volume of 4. 5 L. If the temperature is raised to 29 °C and the pressure is not changed, what is the new volume of the gas?
A. 4. 7 L
B. 4. 9 L
C. 5. 3 L
D. 5. 5 L
A 2,000-kg elevator is being accelerated upward at a rate of 3. 0 m/s2. What is the tension in the cable
The tension in the cable of the elevator is 6,000 N
The tension in the cable of the elevator can be calculated using the equation F = ma, where F is the force, m is the mass, and a is the acceleration.
In this case, the force required to accelerate the elevator upward is equal to the tension in the cable.
Given that the elevator has a mass of 2,000 kg and is being accelerated upward at a rate of 3.0 m/s2, we can calculate the force required as follows:
F = ma
F = 2,000 kg x 3.0 m/s2
F = 6,000 N
In summary, the tension in the cable of the elevator is equal to the force required to accelerate it upward, which is calculated using the equation F = ma.
Given the elevator's mass of 2,000 kg and upward acceleration of 3.0 m/s2, the tension in the cable is 6,000 N.
To know more about acceleration refer here
https://brainly.com/question/12550364#
#SPJ11
If x = 3.0 cm and y = 15.0 cm, what is the ideal mechanical advantage (ima) of the
pliers?
If x = 3.0 cm and y = 15.0 cm, The ideal mechanical advantage (ima) of the pliers is: 5.
The IMA of pliers can be determined by using the formula:
IMA = Length of Effort Arm (y) / Length of Resistance Arm (x)
In this case, y is the length of the effort arm (15.0 cm), and x is the length of the resistance arm (3.0 cm). Plugging these values into the formula, we get:
IMA = 15.0 cm / 3.0 cm
IMA = 5
So, the ideal mechanical advantage of the pliers is 5. This means that, ideally, the force applied by the pliers is magnified by a factor of 5.
To know more about mechanical advantage, refer here:
https://brainly.com/question/6968974#
#SPJ11
Protostars are difficult to observe because :__________.
a. the protostar stage is very short. they are surrounded by cocoons of gas and dust.
b. the protostar stage is very short, they are surrounded by cocoons of gas and dust, and they radiate mainly in the infrared.
c. they are all so far away that the light hasn't reached us yet.
d. they radiate mainly in the infrared.
Protostars are difficult to observe because : they are heavily obscured by dust and gas, making them hard to detect in visible light and other forms of electromagnetic radiation.
What is electromagnetic?Electromagnetic (EM) radiation is a form of energy that is produced by the movement of electrically charged particles. It is a type of energy that can travel through space at the speed of light, and is made up of both electric and magnetic fields. EM radiation is created by the acceleration of charged particles, such as electrons, protons, and ions. EM radiation is found in a broad spectrum of wavelengths, which includes everything from radio waves to gamma rays. EM radiation has many practical uses, such as in television, radio, and mobile phones. It is also used in medical treatments such as radiation therapy and X-ray imaging. EM radiation is also used in communication between spacecraft and the Earth.
To learn more about electromagnetic
https://brainly.com/question/1408043
#SPJ4
An illustration of a battery with a copper wire attached to its top end that runs to a nail, wraps all around and down the length of the nail, and then connects to the bottom end of the battery.
What effect does decreasing the number of coils around the nail have on the strength of the electromagnet?
It remains the same strength.
It depends how many coils are removed.
It becomes weaker.
It becomes stronger.
The electromagnet becomes weaker when the number of coils around the nail is decreased. The correct answer is "It becomes weaker."
An electromagnet is created by coiling a wire around a magnetic core, such as a nail, and running an electric current through the wire. This creates a magnetic field around the wire, which magnetizes the core.
The strength of the magnetic field and thus the strength of the electromagnet is directly proportional to the number of coils around the magnetic core.
This is because each coil adds to the magnetic field, and the more coils there are, the stronger the magnetic field becomes.
When some coils are removed, there are fewer coils contributing to the magnetic field. As a result, the strength of the magnetic field and thus the strength of the electromagnet decreases.
Therefore, the correct option is " it becomes weaker" when the number of coils around the nail is decreased.
For more such questions on electromagnet, click on:
https://brainly.com/question/31163120
#SPJ11
A truck weighs 25,000 n, and its tires are inflated to a pressure of 200 kpa. what is the total area of the truck’s tires in contact with the road?
The total area of the truck's tires in contact with the road is 0.125 square meters.
To find the total area of the truck's tires in contact with the road, we can use the formula for pressure, which is pressure equals force divided by area. Rearranging this formula to solve for area, we get area equals force divided by pressure.
Using this formula, we can calculate the area of the truck's tires by dividing the weight of the truck by the pressure of the tires:
Area = 25,000 N / 200 kPa
Before we can calculate the area, we need to make sure that our units are consistent. We can convert kilopascals to pascals by multiplying by 1,000, so we get:
Area = 25,000 N / (200,000 Pa)
Simplifying this expression, we get:
Area = 0.125 [tex]m^{2}[/tex]
Therefore, the total area of the truck's tires in contact with the road is 0.125 square meters.
To know more about kilopascals, refer here:
https://brainly.com/question/30626869#
#SPJ11
Every time the world gathers for the Olympic games, new records in track and field events are recorded. In 2021, Sydney McLaughlin established a new Olympic record when she ran the 400.-meter hurdles in 51.46 seconds.
What was her average speed (in m/s) for the race? Remember to include your data, equation, and work when solving this problem.
Essay Submission · Turnitin Score: 36 %
Sydney McLaughlin's average speed during the 400-meter hurdles race was 7.77 m/s.
What was her average speed for the race?The average speed of Sydney McLaughlin during the 400-meter hurdles race is calculated as follows;
Average speed = distance / time
The distance is 400 meters, and the time is 51.46 seconds.
The average speed of Sydney McLaughlin during the 400-meter hurdles race is calculated as;
Average speed = 400 / 51.46
Average speed = 7.77 m/s
Learn more about average speed here: https://brainly.com/question/4931057
#SPJ1