The snow globe below is formed by a hemisphere and a cylinder on a cylindrical
base. The dimensions are shown below. The base is slightly wider than the globe
with a diameter of 10cm and height of 1cm.
10 cm
4cm
3cm
Part C: If each globe is individually packaged into a box, what are the minimum
dimensions of the box?

A row parallel to the line y = 4 on a coordinate grid would be represented by a line with an equation of the form y = c.

A coordinate grid is a two-dimensional plane consisting of a horizontal x-axis and a vertical y-axis. The point where the x and y-axes intersect is called the origin, and it has coordinates (0, 0).

An equation in the form y = c, where c is a constant, represents a horizontal line parallel to the x-axis. In this case, the equation y = 4 represents a horizontal line that intersects the y-axis at 4, as all points on the line have a y-coordinate of 4.

To find a row parallel to this line, we need to look for another line that also has a constant y-coordinate of 4. One way to represent this line is by the equation y = 4 again, since all points on this line have a y-coordinate of 4.

Alternatively, we can look for an equation in the form y = mx + b, where m is the slope of the line (which is zero for a horizontal line), and b is the y-intercept (which is 4 in this case). Thus, the equation for the row parallel to y = 4 would also be y = 4, since its slope is zero and it intersects the y-axis at y = 4, just like the line y = 4.

Learn more about coordinate grid

brainly.com/question/17597121

#SPJ11

The average walking rate for Path A is 2.5 mph, path B's is 2 mph and path C's is 3 mph.

Average walking rate = distance/time

for path A = 0.5/12 = 0.0416 mpm

To convert miles per meter into miles per hour it we will multiply the equation by 60 because 1 hour has 60 min

so, for path A = 0.0416 × 60 = 2.5 mph

Similarly , for path B = (1.5/45) × 60 = 2 mph

For path C = (0.75/15)×60 = 3 mph

Table to show the average walking rate

Path     Distance(mi)     Time(min)      Walking rate (mph)

  A              0.5                   12                    2.5

  B              1.5                    45                    2

  C              0.75                 15                     3

To know more about Average click here:

https://brainly.com/question/12322912

#SPJ4

The volume of a rectangular prism is calculated by multiplying the length, width, and height. In this case, we are given the length and width, but not the height. So, we cannot calculate the exact volume without knowing the height.

To find the volume of a rectangular prism, we need to multiply its length, width, and height.

Given:

Length = 2 units

Width = 7 1/3 units

To calculate the volume, we first need to convert the mixed fraction to an improper fraction.

7 1/3 = (7 * 3 + 1) / 3 = 22/3 units.

Now, we can calculate the volume:

Volume = Length * Width * Height

= 2 units * (22/3 units) * Height.

Since the height is not provided, we cannot calculate the exact volume without that information. However, if you provide the height of the rectangular prism, I can help you find the volume by substituting the value into the formula.

To know more about volume of a rectangular prism, refer here:

https://brainly.com/question/29753475

#SPJ11

The value of the domains is given as:

In order to find the results of (fg)(x) and (f/g)(x), we must begin by multiplying and dividing the two functions, respectively:

(fg)(x) = f(x) * g(x) = [tex]3x * 3(x + 1)^2 = 9x(x + 1)^2[/tex]; its domain containing all real numbers.

Similarly, (f/g)(x) = f(x) / g(x) = in a domain that does not [tex]3x / 3(x + 1)^2 = x / (x + 1)^2[/tex]include x = -1 (if g(x) ≠ 0).

Let us now evaluate  (fg)(5) and (f/g)(5):

(fg)(5) =[tex]9(5)(5 + 1)^2 = 9(5)*(6)^2[/tex] = 9(5(36)) = 1620 while  

(f/g)(5) = [tex]5/(5 + 1)^2 = 5/(6)^2[/tex] = 5/36.

Consequently, (fg)(5) equals 1620 and (f/g)(5) is equivalent to 5/36.

Read more about domain here:

https://brainly.com/question/26098895

#SPJ1

Answer:

(-1/5)x + 8 = -x + 4

(4/5)x + 8 = 4

(4/5)x = -4

x = -5, so y = 9

C. There is one unique solution (-5, 9).

The total number of cupcakes charity can make in 8 hours is 384

The total number of cupcakes she can make in 45 minutes is 36

Cupcakes she can make in 1 minute = 36/45

Cupcakes she can make in 1 minute = 0.8

Cupcakes she can make in 8 hours

We will convert hours into minutes

1 hour = 60 min

8 hour = 8 × 60 min

8 hour = 480 min

Cupcakes she can make in 8 hours that is 480 min = 480 × 0.8

Cupcakes she can make in 8 hours = 384

Total number of cupcakes she can make is 384

To know more about numbers click here :

https://brainly.com/question/17429689

#SPJ4

The police dog spends 1/6 of its workday at the police station.

To find the fraction of the police dog's workday spent at the police station, we need to add up the fractions of time spent in each location and subtract them from 1, since the dog spends the rest of the day at the police station.

Fraction of time spent in police car =  [tex]1/3[/tex]

Fraction of time spent in public = [tex]1/2[/tex]

To add these fractions, we need to find a common denominator:

[tex]1/3 = 2/6\\1/2 = 3/6[/tex]

So, the fraction of the dog's day spent at the police station is:

[tex]1 - (2/6 + 3/6) = 1 - 5/6[/tex]

                        = [tex]1/6[/tex]

Therefore, the police dog spends 1/6 of its workday at the police station.

Learn more about Police Station at

brainly.com/question/12816186

#SPJ4

The mean absolute deviation of the given data set is approximately 2.16.

To find the mean absolute deviation (MAD), we first need to calculate the mean of the data set:

Mean = (10 + 10 + 9 + 8 + 10 + 5 + 6 + 4 + 8 + 4) / 10 = 7.4

Next, we calculate the absolute deviation of each data point from the mean:

|10 - 7.4| = 2.6

|10 - 7.4| = 2.6

|9 - 7.4| = 1.6

|8 - 7.4| = 0.6

|10 - 7.4| = 2.6

|5 - 7.4| = 2.4

|6 - 7.4| = 1.4

|4 - 7.4| = 3.4

|8 - 7.4| = 0.6

|4 - 7.4| = 3.4

Then, we find the average of these absolute deviations:

MAD = (2.6 + 2.6 + 1.6 + 0.6 + 2.6 + 2.4 + 1.4 + 3.4 + 0.6 + 3.4) / 10 ≈ 2.16

Therefore, the mean absolute deviation of the given data set is approximately 2.16.

To know more about mean absolute deviation, refer to the link below:

https://brainly.com/question/10528201#

#SPJ11

To find the number of minutes it will take for both Aquarium A and Aquarium B to contain the same amount of water, we can set up an equation using the given information.

Aquarium A starts with 6 gallons and is filled at 2 gallons per minute. The equation for Aquarium A will be:

A = 6 + 2t

Aquarium B starts with 54 gallons and is filled at 1 gallon per minute. The equation for Aquarium B will be:

B = 54 + 1t

We want to find the time 't' when the amount of water in both aquariums is equal, so we can set the equations equal to each other:

6 + 2t = 54 + 1t

Now, solve for 't':
2t - 1t = 54 - 6
t = 48

After 48 minutes, both Aquarium A and Aquarium B will contain the same amount of water.

Learn more about Aquarium at https://brainly.com/question/29416802

#SPJ11

Answer:

A= 225π  ft²

Step-by-step explanation:

A = π r²

A= π 15²

A= 225π  ft²

Answer:

706.86

Step-by-step explanation:

1. A=πr^2 : The formula to find the area of a circle.

2. A = π15^2 : Substitute the given radius value into the equation.

3. Insert equation into calculator

706.86 (Rounded to the nearest hundredth)

To find the number of unique types of sneakers, we need to multiply the number of options for each characteristic:

Number of colors: 6

Number of styles: 4

Number of fabrics: 3

Total number of unique types of sneakers = 6 x 4 x 3 = 72

Therefore, the manufacturer makes 72 unique types of sneakers.

#SP11

The function for the population of Madison t years from now is:[tex]p(t) = 25000 (1.12)^{t}[/tex]

To write a function that gives the population P(t) in Madison t years from now, considering the town has an initial population of 25,000 and an annual increase factor of 1.12, you can use the formula:

[tex]p(t) = P_{0}  (1 + r)^{t}[/tex]

Where:
- P(t) is the population at time t
- P_0 is the initial population (25,000)
- r is the annual increase factor (1.12 - 1 = 0.12)
- t is the number of years

So, the function for the population of Madison t years from now is:
[tex]p(t) = 25000 (1.12)^{t}[/tex]

To know more "Function" refer here:

https://brainly.com/question/10500042#

#SPJ11

The perpendicular distance between the bases of a trapezoid with an area of 337.5 ft² and base lengths of 25 ft and 20 ft is 15 ft.

Area = (1/2) * (Base1 + Base2) * Height

In this case, the area is 337.5 ft², Base1 is 25 ft, and Base2 is 20 ft. We need to solve for the height, which represents the perpendicular distance between the bases.

Plugging in the known values into the formula:

337.5 = (1/2) * (25 + 20) * Height

Simplifying the expression:

337.5 = (1/2) * (45) * Height

Multiplying both sides of the equation by 2 to get rid of the fraction:

675 = 45 * Height

Dividing both sides by 45 to solve for the height:

Height = 675 / 45

Height = 15 ft

Therefore, the perpendicular distance between the bases of the trapezoid is 15 ft.

To learn more about trapezoid: https://brainly.com/question/1410008

#SPJ11

The 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list falls between 0.194 and 0.286.

To construct the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list, we can use the following formula:

[tex]\hat{p} \pm z^* \sqrt{\frac{\hat{p} (1 - \hat{p})}{n}}[/tex]

where [tex]$\hat{p}$[/tex] is the sample proportion, [tex]$n$[/tex] is the sample size, and [tex]$z^*$[/tex] is the z-score corresponding to the desired level of confidence. Since we are looking for an 85% confidence interval, the z-score is 1.440.

First, we can calculate the sample proportion:

[tex]\hat{p} = \frac{109}{455} = 0.240[/tex]

Next, we can plug in the values into the formula:

[tex]$$ 0.240 \pm 1.440 \sqrt{\frac{0.240 (1 - 0.240)}{455}} $$[/tex]

Simplifying this expression, we get:

[tex]$$ 0.240 \pm 0.046 $$[/tex]

Therefore, the 85% confidence interval for the population proportion of people who are captured after appearing on the 10 Most Wanted list is [tex]$(0.194, 0.286)$[/tex].

We can interpret this interval as follows: if we were to draw many samples of size 455 from the population of people who appear on the 10 Most Wanted list, and construct a 85% confidence interval for the proportion of people who are captured based on each sample, about 85% of these intervals would contain the true population proportion.

Furthermore, we are 85% confident that the true population proportion of people who are captured after appearing on the 10 Most Wanted list falls between 0.194 and 0.286.

To learn more about  confidence interval refer here:

https://brainly.com/question/29680703

#SPJ11

The most likely factor to push the price of a company's stock higher is an increase in demand for the company's stock. Option A.

A stock's price will often increase when there is greater demand than there is supply. Various things, such as good news about the company's financial performance, new product releases or innovations, positive analyst reports, or general market trends, can contribute to this increased demand.

The company's financial performance may benefit from a rise in product demand, but if investors do not view it as a key growth engine for the business, it may not necessarily transfer into a higher stock price.

Learn more about stocks:

brainly.com/question/29750557

#SPJ4

The area of the 125 degree sector for a circle with a radius of 12 m is approximately 158 square meters.

To find the area of a 125 degree sector of a circle with a radius of 12 m, we need to use the formula for the area of a sector:

Area of sector = (θ/360) x πr², where θ is the central angle of the sector, r is the radius of the circle, and π is a constant equal to approximately 3.14.

Substituting the given values, we get: Area of sector = (125/360) x π x 12² = (0.3472) x π x 144 = 158.03

Rounding to the nearest whole number, we get the area of the sector as 158 square meters. Therefore, the area of the 125 degree sector for a circle with a radius of 12 m is approximately 158 square meters.

To know more about area of circle, refer here:

https://brainly.com/question/28642423#

#SPJ11

To find the volume and surface area of the composite figure, we need to first find the individual volumes and surface and the right cone, and then add them together.

The volume of a hemisphere with radius r is (2/3)πr^3, and the surface area is 2πr^2.

The volume of a right cone with radius r, height h, and slant s is (1/3)πr^2h, and the surface area is πr^2 + πrs.

In this case, the radius r and slant s are both 6 cm, and the height h of the cone can be found using the Pythagorean theorem: h = √(s^2 - r^2) = √(8^2 - 6^2) = √28 ≈ 5.29 cm.

So, the volume of the hemisphere is (2/3)π(6 cm)^3 = 72π/3 = 24π cubic cm, and the surface area is 2π(6 cm)^2 = 72π square cm.

The volume of the right cone is (1/3)π(6 cm)^2(5.29 cm) = 62.83π/3 ≈ 20.94π cubic cm, and the surface area is π(6 cm)^2 + π(6 cm)(8 cm) = 36π + 48π = 84π square cm.

Therefore, the total volume of the composite figure is 24π + 20.94π = 44.94π cubic cm, and the total surface area is 72π + 84π = 156π square cm.

To know more about composite figure refer here

https://brainly.com/question/27234680#

#SPJ11

Answer:34

Step-by-step explanation:

The slope of the equation is 0.6, which means that for every second, the computer downloads 0.6 megabytes of data, option C is correct.

The linear equation that represents the number of megabytes downloaded per second can be determined by dividing the total amount of data downloaded (3 MB) by the time taken to download it (5 seconds). This gives us the rate of download in megabytes per second (MB/s). Therefore, the equation is:

y = 0.6x

where y represents the number of megabytes downloaded per second and x represents the time taken to download the data. The negative slope values in the other options do not make sense, as the number of megabytes downloaded per second should be a positive value, option C is correct.

To learn more about equation follow the link:

https://brainly.com/question/11897796

#SPJ1

The height of the tree is approximately equal to the tangent of 768 radians multiplied by 50 meters, rounded to the nearest meter.

To find the height of the tree, we can use trigonometry. Let's assume that the height of the tree is represented by the variable "h."

In a right triangle formed by the forester, the base of the tree, and the top of the tree, the tangent of the angle is equal to the opposite side (height of the tree, h) divided by the adjacent side (distance from the base of the tree, 50 m).

Using the tangent function, we can write:

tan(angle) = [tex]\frac{h }{ 50}[/tex]

We can rearrange this equation to solve for h:

h = tan(angle) * 50

Now we can substitute the given angle into the equation and calculate the height:

h = tan(768) * 50

Calculating this in degrees might result in an error because the tangent function expects the angle to be in radians.

Therefore, we need to convert the angle to radians before evaluating the tangent.

There are 180 degrees in pi radians, so we can convert the angle as follows:

angle_radians = [tex]\frac{768 \* \pi }{ 180}[/tex]

Substituting this value into the equation:

h = tan(angle_radians) * 50

Now we can calculate the height using a calculator:

h ≈ [tex]tan(\frac{768 \pi }{ 180}) 50[/tex]

After evaluating this expression, we get the height of the tree. Rounding the answer to the nearest meter will give us the final result.

Learn more about the height of the tree.

brainly.com/question/14579521

#SPJ11

The work done to lift a 90 kg weight by 75 cm is approximately 661.5 joules.

Para calcular el trabajo realizado al elevar una pesa de 90 kg a una altura de 75 cm sobre el piso, necesitamos conocer la fuerza necesaria para levantar la pesa y la distancia que recorre la pesa para llegar a su altura máxima.

El trabajo se define como la energía necesaria para mover un objeto a través de una distancia determinada, y se calcula como el producto de la fuerza aplicada y la distancia recorrida.

En este caso, la fuerza necesaria para levantar la pesa es igual a su peso, que se calcula como su masa multiplicada por la aceleración debido a la gravedad (9.8 m/s²):

peso = masa x gravedad

    = 90 kg x 9.8 m/s²

    = 882 N

La distancia que recorre la pesa para elevarse 75 cm (o 0.75 m) es:

distancia = 0.75 m

Por lo tanto, el trabajo realizado al elevar la pesa es:

trabajo = fuerza x distancia

       = 882 N x 0.75 m

       = 661.5 J

Por lo tanto, se requiere un trabajo de 661.5 J para elevar una pesa de 90 kg a una altura de 75 cm sobre el piso.

Learn more about elevar

brainly.com/question/29331208

#SPJ11

Based on the information on the number line, the numbers that represent the percentages are: 42 (100%), 21 (50%), 63 (150%).

To calculate the number that is equivalent to each percentage we must carry out the following procedure: Rule of three. In this case we must take into account that 42 represents 100% of the people.

Learn more about rule of three at: https://brainly.com/question/9264846

#SPJ1

The domain of the function y = (3/x) - 1 is all real numbers except x = 0

The domain of a function consists of all the valid input values for which the function is defined. In the case of the function y = (3/x) - 1, the only restriction on the domain arises from the presence of the variable x in the denominator.

To determine the domain, we need to find the values of x for which the expression 3/x is defined. Division by zero is undefined, so we must exclude any value of x that makes the denominator equal to zero.

In this case, we set the denominator, x, equal to zero and solve for x:

x = 0

Therefore, x cannot be equal to zero. All other real numbers are valid input values for this function. Therefore, the domain of the function y = (3/x) - 1 is all real numbers except x = 0. In interval notation, we can represent the domain as (-∞, 0) ∪ (0, ∞).

To learn more about domain

https://brainly.com/question/17021562

#SPJ11

The payback period for the auto is approximately 8 years.

Buy-Rite Pharmacy has purchased an auto for delivering prescriptions. The auto was purchased for $26,000, and it has a useful life of 6 years with a $5,500 salvage value. By delivering prescriptions, the pharmacy aims to increase gross revenues by at least $33,500 per year. The pharmacy will incur a cost of $28,000 per year for these prescriptions.

Using the straight-line method, the annual depreciation of the auto is ($26,000 - $5,500) / 6 = $3,917. This means that the total cost of the auto over 6 years will be $26,000 - $5,500 + ($3,917 x 6) = $43,502.

To calculate the payback period, we need to determine how long it will take for the increased gross revenues to cover the cost of the auto.

The net increase in revenues will be $33,500 - $28,000 = $5,500 per year. Therefore, the payback period is $43,502 / $5,500 = 7.9 years, which is rounded to 8 years.

To know more about payback period, refer to the link below:

https://brainly.com/question/13978071#

#SPJ11

The area of the polygon composed of rectangles and triangle is 52 in²

Area is the amount of space occupied by a two dimensional shape or object.

For the first right triangle:

base = 2 in, height = 6 in

Area of first right triangle = 1/2 * base * height = 0.5 * 2 in * 6 in = 6 in²

For the second right triangle:

base = 2 in, height = 6 in

Area of second right triangle = 1/2 * base * height = 0.5 * 2 in * 6 in = 6 in²

For the triangle:

base = (2 + 4 + 2) = 8 in, height = 4 in

Area of triangle = 1/2 * base * height = 0.5 * 8 in * 4 in = 16 in²

For the rectangle:

length = 4 in, width = 6 in

Area of rectangle = length * width = 4 in * 6 in = 24 in²

Area of polygon = 6 + 6 + 16 + 24 = 52 in²

The area of the polygon is 52 in²

Find out more on area at: https://brainly.com/question/2972832

#SPJ1

the measurement of the couch in the scale drawing would be 15 inches.

We can precisely portray locations, areas, structures, and details in scale drawings at a scale that is either smaller or more feasible than the original.

When a drawing is said to be "to scale," it signifies that each piece is proportionate to the real or hypothetical entity; it may be smaller or larger by a specific amount.

When something is described as being "drawn to scale," we assume that it has been printed or drawn to a conventional scale that is accepted as the norm in the construction sector.

When our awareness of scale improves, we are better able to quickly recognize the spaces, zones, and proposed or existent spatial relationships when looking at a drawing at a given scale.

One metre is equivalent to one metre in the actual world. When an object is depicted at a 1:10 scale, it is 10 times smaller than it would be in real life.

You might also remark that 10 units in real life are equivalent to 1 unit in the illustration.

To determine the measurement of the couch in the scale drawing, we can use the scale factor provided:

1/4 inch = 2 feet

This means that every 1/4 inch in the drawing represents 2 feet in real life.

To find the measurement of the couch in the drawing, we need to convert its actual size to the corresponding size in the drawing using the scale factor.

First, we can convert the actual size of the couch to feet:

10 ft = 10 ft x 12 inches/ft = 120 inches

Next, we can use the scale factor to convert the actual size to the corresponding size in the drawing:

1/4 inch = 2 feet

1 inch = 8 feet (multiplying both sides by 4)

So, 120 inches in real life is equal to:

120 inches / 8 feet per inch = 15 inches in the drawing

Therefore, the measurement of the couch in the scale drawing would be 15 inches.

To know more about scale drawing visit :-

https://brainly.com/question/17388747

#SPJ1

he interest he will pay if he takes 2 years to pay his parents back is $153.16. The total amount he will pay if he takes 2 years to pay his parents back is $2,341.12.

To calculate the interest Adam will pay, we need to use the simple interest formula:

Interest = Principal x Rate x Time

The principal is the amount borrowed, which is $2,187.96. The rate is 3.5% per year, or 0.035 in decimal form. The time is 2 years.

Interest = $2,187.96 x 0.035 x 2 = $153.16

Therefore, Adam will pay $153.16 in interest if he takes 2 years to pay his parents back.

To calculate the total amount he will pay, we need to add the interest to the principal:

Total amount = Principal + Interest

Total amount = $2,187.96 + $153.16 = $2,341.12

Therefore, Adam will pay a total of $2,341.12 if he takes 2 years to pay his parents back.

Learn more about simple interest here: https://brainly.com/question/25793394

#SPJ11

Using the t-distribution table with a sample size of 36 and a significance level of 0.05, we find the critical t-value to be ±2.03 (with 34 degrees of freedom, which is n-1).

To explain, we use the t-distribution to find the critical values because the population standard deviation is known. Since the alternative hypothesis is two-tailed (H_A: μ ≠ 40), we need to find two critical values.

With a sample size of 36, the degrees of freedom are 34 (n-1), so we use a t-distribution table with 34 degrees of freedom and a significance level of 0.05. From the table, we find the critical t-value to be ±2.03.

Therefore, if the calculated t-value falls outside of this range, we can reject the null hypothesis H0: μ = 40 in favor of the alternative hypothesis H_A: μ ≠ 40.

Learn more about Hypothesis

brainly.com/question/31804924

#SPJ11