[tex] \\ [/tex]
Frequency, f, is how many cycles of an oscillation occur per second and is measured in cycles per second or hertz (Hz). The period of a wave, T, is the amount of time it takes a wave to vibrate one full cycle. These two terms are inversely proportional to each other: f = 1/T and T = 1/f.
[tex] \\ [/tex]
Hope It Helps!
Answer:
Inverse
Explanation:
Frequency is the number of cycles in a second. Frequency is the inverse of a period
frequency = 1 / period
A cork dropped into a water filled beaker floats with volume V1 representing the portion of cork above water. When it is dropped in a beaker containing corn syrup, it floats with its volume V2 (again, the portion of cork above syrup). How do these volumes compare?A. V1 = V2.B. V1 > V2.C. V1 < V2.D. V1 ≥ V2.
Answer:
C. V1 < V2
Explanation:
The computation is shown below:
As we know that
Byoyancy force represent the displaced water weight
[tex]B = V_{in},_{w}P_{w}g[/tex]
[tex]V_{in},_{w}[/tex] denotes cork volume that inside the water
[tex]P_{w}[/tex] denotes water density
And, byoyancy force represent the displaced weight of corn syrup
[tex]B = V_{in},_{syr}P_{syr}g[/tex]
[tex]V_{in},_{syr}[/tex] denotes the cork volume that inside the water
[tex]P_{syr}[/tex] denotes syrup density
Now
[tex]P_{syr}>P_{w}\\\\V_{in},_{syr}<V_{in},_{wat}\\\\V_2>V_1 or V_1 <V_2[/tex]
Hence, the option c is correct
True or False 1-10
1. When air temperature falls, the air can hold more water vapor.
2. Cloudy days tend to have a greater range of temperatures than clear days.
3. Water vapor condenses when air temperature reaches the dew point.
4. A cloud consists of billions of individual water droplets.
5. Dust or other particles are needed for clouds to form.
6. Only high clouds consist of ice crystals.
7. Stratocumulus clouds rarely bring precipitation.
8. Advection fog forms when warm humid air travels up a hillside and cools.
9. All precipitation falls from clouds.
10. Hail forms in cumulonimbus clouds with strong updrafts.
Answer:
in order of questions asked:
f
t
t
t
t
t
f
t
f
t
When air temperature falls, the air can hold more water vapor, this statement if false because air doesn't hold more water in this case.
Cloudy days tend to have a greater range of temperatures than clear days. This assertion is true.
Water vapor condenses when air temperature reaches the dew point. This assertion is true.
A cloud consists of billions of individual water droplets. This assertion is true
Dust or other particles are needed for clouds to form. This assertion is true.
Only high clouds consist of ice crystals. This assertion is true.
Stratocumulus clouds rarely bring precipitation. This assertion is false.
Advection fog forms when warm humid air travels up a hillside and cools. True.
All precipitation falls from clouds. False.
Hail forms in cumulonimbus clouds with strong updrafts. True.
Learn more about clouds here: https://brainly.com/question/1783904
#SPJ2
what causes most thing to expand on heating and contracts on cooling draw a diagram to support the answer
Answer:
air and oxygen makes in bigger
Explanation:
Wave 1 has a wavelength 0.5 m and wave 2 has a wavelength= 0.05m. which wave carries higher energy?
Answer & Explanation:
The energy of a wave depends upon its amplitude, frequency and wave speed.
Assuming that both these waves are light waves, they have the same speed and amplitude can be assumed to be constant.
Wave 2 has a smaller wavelength and hence a higher frequency as c = λf, where
c is the speed of light,
λ is the wavelength and
f is the frequency of the wave.
Since wave 2 has a higher frequency, it has more energy.
DOES ANYONE KNOW HOW TO DO THIS?
Question:
Convert 68 MHz to Hz.
Answer:
68000
Explanation:
1 MHz = 1000 Hz
just multiply by 1000 :)
A car turns a certain curve of radius 24.98 m with constant linear speed of
15.67 m/s. If the centripetal force experienced by that car is 34.652 kN, what is the
mass of the car?
Answer:
3525.19 kg
Explanation:
The computation of the mass of the car is shown below:
As we know that
Fc = m × V^2 ÷ R
m = Fc × R ÷ V^2
Provided that:
Fc = 34.652 kN = 34652 N
R = Radius = 24.98 m
V = speed = 15.67 m/s
So,
m = 34652 × 24.98 ÷ 15.67^2
= 3525.19 kg
A Carnot engine operates between 1350 °F and 125 °F. If it rejects 55 Btu as heat, determine the work output.
a. W =68.54 Btu
b. W=145.19 Btu
c. W = 115.12 Btu
d. W=235.7 Blu
Answer:
C. [tex]W = 115.12\,Btu[/tex]
Explanation:
Thermodynamically speaking, a Carnot engine represents an entirely reversible thermal process and its energy efficiency represents the maximum theoretical efficiency that thermal machines can reach. The efficiency of the ideal thermal process ([tex]\eta[/tex]), no unit, is:
[tex]\eta = \left(1-\frac{T_{L}}{T_{H}} \right)[/tex] (1)
Where:
[tex]T_{L}[/tex] - Temperature of the cold reservoir, measured in Rankine.
[tex]T_{H}[/tex] - Temperature of the hot reservoir, measured in Rankine.
If we know that [tex]T_{H} = 1809.67\,R[/tex] and [tex]T_{L} = 584.67\,R[/tex], then the energy efficiency of the ideal thermal process is:
[tex]\eta = 0.678[/tex]
By First Law of Thermodynamics, we calculate the work output:
[tex]W = Q_{H}-Q_{L}[/tex]
[tex]W = \frac{W}{\eta} -Q_{L}[/tex] (By definition of efficiency)
[tex]Q_{L} = \frac{W}{\eta}-W[/tex]
[tex]Q_{L} = \left(\frac{1}{\eta}-1 \right)\cdot W[/tex](2)
Where:
[tex]Q_{H}[/tex] - Heat received by the engine, measured in Btu.
[tex]Q_{L}[/tex] - Heat rejected by the engine, measured in Btu.
[tex]W[/tex] - Work output, measured in Btu.
If we know that [tex]\eta = 0.678[/tex] and [tex]Q_{L} = 55\,Btu[/tex], then the work output of the Carnot engine is:
[tex]W = \frac{Q_{L}}{\frac{1}{\eta}-1 }[/tex]
[tex]W = 115.807\,Btu[/tex]
The work output of the Carnot engine is 115.807 Btu. (Answer: C)
A 107 kg boat that is 7 m in length is initially 7.3 m from the pier. A 53 kg child stands at the end of the boat closest to the pier. The child then notices a turtle on a rock at the far end of the boat and proceeds to walk to the far end of the boat to observe the turtle. 7.3 m 7 m How far is the child from the pier when she reaches the far end of the boat
Answer:
11.98 m
Explanation:
Given that:
mass of the child [tex]m_c[/tex] = 53 kg
mass of the boat [tex]m_b[/tex] = 107 kg
[tex]\text{length of the boat L = 7 m}[/tex]
the distance of the boat from pies l = 7.3 m
initial momentum [tex]P_i = 0[/tex]
Final momentum [tex]P_f = mc \dfrac{L}{f}- (m_c +m_b) \dfrac{x}{l}[/tex]
where;
x = distance moved by boat towards left
t = time taken for the child to travel to the far end of the boat
[tex]P_i =P_f[/tex]
∴
[tex]m_c \dfrac{L}{t}=(m_c +m_b) \dfrac{x}{t}[/tex]
Then;
[tex]x = \dfrac{m_cL}{m_c+m_b}[/tex]
[tex]x = \dfrac{53 \times 7}{53+107}[/tex]
x = 2.32 m
The distance of the child from the pier is:
d = L +(l - x)
d = 7 m + ( 7.3 m - 2.32 m)
d = 7 m + 4.98 m
d = 11.98 m
Two light bulbs are 2.0 m apart. From what distance can these light bulbs be marginally resolved by a small telescope with a 4.50 cm. Assume that the lens is limited only by diffraction and λ = 600 nm
Answer:
R = 1.2295 10⁵ m
Explanation:
After reading your problem they give us the diameter of the lens d = 4.50 cm = 0.0450 m, therefore if we use the Rayleigh criterion for the resolution in the diffraction phenomenon, we have that the minimum separation occurs in the first minimum of diffraction of one of the bodies m = 1 coincides with the central maximum of the other body
θ = 1.22 λ / D
where the constant 1.22 leaves the resolution in polar coordinates and D is the lens aperture
how angles are measured in radians
θ = y / R
where y is the separation of the two bodies (bulbs) y = 2 m and R the distance from the bulbs to the lens
[tex]\frac{y}{R} = 1.22 \frac{ \lambda}{D}[/tex]
R = [tex]\frac{ y \ D}{1.22 \lambda}[/tex]
let's calculate
R = [tex]\frac{ 2 \ 0.045}{ 1.22 \ 600 \ 10^{-9}}[/tex]
R = 1.2295 10⁵ m
Please answer my head is about to explode.
Answer:
290
Explanation:
I tried not so certain abt the answer
Answer:
Explanation:
Givens
Mass: 1450 kg
vi = 0
a = 5 m/s^2
vf=?
Formula
KE = 1/2 m v^2
d = vi * t + 1/2 a t^2
a = (vf - vi)/t
Solution
The final KE = 0 because the final velocity = 0 (The concrete wall saw to that).
Second formula
d = vi*t + 1/2 a t^2
20 = 0 + 1/2 * 5 * t^2
40 = 5*t^2 Divide by 5
40/5 = t^2
8 = t^2
2√2 = t
Third formula
5 = (vf - 0)/2√2 Multiply by 2√2
5* 2√2 = vf
10√2= vf
First formula
KE = 1/2 m * (10√2)^2
KE = 1/2 1450 * 100*2
KE = 1450 * 100 2 and 1/2 cancel out.
KE = 145000
This means that the change in KE is 145000 Joules or 145 kJ
23. Christina wanted to know whether the eating behavior of goldfish is affected by music. She set up a fish
tank. Every day, she played music for the fish and measured how much the fish ate. What is Christina
missing from this experiment?
A. a control group
B. a measurable result
C. a dependent variable
D. different types of fish
Answer:
a control group
Explanation:
To have a succsessful experiment you need something to compare your variable to.
How much work must be done to raise a 1100kg car 2m above the ground?
Answer:
21560 J
Explanation:
Work = mg*h = 1100*9.8*2 = 21560 J
21560 J work must be done to raise an 1100 kg car 2m above the ground.
Work = mass * gravity * height
= 1100 * 9.8 * 2
= 21560 J
What is work done?In precis, work is carried out whilst pressure acts upon an item to purpose a displacement. 3 portions must be regarded in the way to calculate the quantity of work. The ones 3 portions are force, displacement, and the perspective between the pressure and the displacement.
Paints carried out are elaborated in this type of manner that includes both forces exerted on the body and the whole displacement of the body. This block is preceded by a steady force F. The purpose of this pressure is to move the body a certain distance d in an immediate route in the route of the pressure.
Learn more about work here: https://brainly.com/question/1382377
#SPJ2
Light rays travel from one medium into another and refract away from the boundary. What changes about the light to cause this refraction?
A. Its speed increases.
B. Its frequency increases.
C. Its frequency decreases.
D. Its speed decreases.
Answer:
a
Explanation:
I think its a its speed increases.....
If a truck has a mass of 7,692 kg and travels at a speed 51 m/s what is the momentum of the truck
Answer:
Explanation:
Given the following data;
Velocity = 51 m/s
Mass = 7,692 kg
To find the momentum;
Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex] Momentum = mass * velocity [/tex]
Substituting into the equation, we have;
Momentum = 7692 × 51
Momentum = 392292 Kgm/s
What is the angle of muscle pull?
Answer:
The angle formed between the line of pull of a muscle and the longitudinal axis of the bone in which the muscle is acting. The line of pull is usually indicated by the joint angle. It affects the strength of muscle action; at only certain angles of pull can a muscle exert maximal tension.
Explanation:
hope this helps sorry if it doesn't have a good rest of your night :) ❤
A dropped ball gains speed because
its nature is to become closer to Earth,
its velocity changes.
a gravitational force acts on it
Of inertia
Answer:
3 and 3 and 3
Explanation:
I am sure Hope for brain list
A bicyclist rides 5.0 km due east, while the resistive forcefrom the air has a magnitude of 3.0 N and points due west. Therider then turns around and rides 5.0 km due west, back to herstarting point. The resistive force from the air on the return triphas a magnitude of 3.0 N and points due east.
a) Find the work done by the resistive force during the roundtrip.
Based on answer in part A.
b) Is the resistive force a conservative force? explain.
Answer:
a) Find the work done by the resistive force during the roundtrip.
W=-30kJ
b) Is the resistive force a conservative force? explain.
The resistive force is not a conservative force since the work done during the round trip is not zero
Explanation:
The worf done on object y a constant force F is given by:
W= (F cos ∅)S
Where S is the displacement and ∅ is the angle between the force and the displacement.
The displacement of the bicycle during each part of the trip is s=5000m and teh magnitude of teh resistance force is F=3.0N
∅1=180° he angle between the displacement and the force
W1=W2
W1 = (3.0 cos180) 5000m
W1=-15.O kJ
W=W1+W2
W=-30kJ
The resistive force is not a conservative force since the work done during the round trip is not zero
(a) The work done by the resistive force is 15,000 J
(b) The work done the resistive force is non-conservative since the resultant resistive force in not zero.
Work doneWork is said to be when an applied force displaces an object from its initial position.
Work done by resistive forceThe work done by the resistive force is calculated as follows;
W = FΔr
W = 3 x (5,000 - 0)
W = 15,000 J
Thus, the work done the resistive force is non-conservative since the resultant resistive force in not zero.
Learn more about conservative force here: https://brainly.com/question/15357875
Analyze the data to identify the mathematical relationship between the
amplitude and energy of a mechanical wave. If mechanical wave A has an
amplitude of 1 cm and mechanical wave B has an amplitude of 2 cm, what
will be the relationship between the energy carried by the two waves?
Answer:
Energy of of Wave B is four times the energy of Wave A
Explanation:
As we know, the energy carried by a wave is directly proportional to the square of the amplitude of the wave. Mathematically, this expression can be expressed as
[tex]E \alpha A^2[/tex]
Energy of wave A [tex]\alpha 1^2[/tex]
Energy of wave B [tex]\alpha 2^2[/tex]
Energy of wave A/Energy of wave B
[tex]= \frac{1^2}{2^2} \\= \frac{1}{4}[/tex]
This means that the Energy of of Wave B is four times the energy of Wave A
Answer:
Energy of of Wave B is four times the energy of Wave A
Explanation:
I don’t get my physical science hw it’s about ocean currents
A Gaussian surface consists of a bottom surface made of a flat disk of radius R, in the horizontal plane centered on the origin and a top surface consisting of a hemisphere of the same radius R. A dipole is arranged as show where the charges are q both plus and minus and the separation is a. a)(5 points) What is the signof the electric flux FEthrough the entire Gaussian surface
Answer:
electric flux through the entire Gaussian surface will be positive ( + )
Explanation:
The dipole is surrounded by Gaussian surface of charge q
The electric flux will be positive
i.e. Ф = E. ds since the surface is a close one the direction of the area outwardly will be positive . therefore the angle between E and A < 90°
Hence the electric flux through the entire Gaussian surface will be positive
- .
?
y
(っ◔◡◔)っ ♥ chose the answer with the question marks ♥
Answer:
okay I'm a bit confused but I like the little emoji dudw
Answer:
?
Explanation:
.
A particle move in the xy plane so that its position vector r=bcosQi +bsinQj+ ctk, where b, Q and c are constants. show that the partial move with constant speed.
Answer:
The speed of this particle is constantly [tex]c[/tex].
Explanation:
Position vector of this particle at time [tex]t[/tex]:
[tex]\displaystyle \mathbf{r}(t) = b\, \cos(Q)\, \mathbf{i} + b\, \sin(Q) \, \mathbf{j} + c\, t\, \mathbf{k}[/tex].
Write [tex]\mathbf{r}(t)[/tex] as a column vector to distinguish between the components:
[tex]\mathbf{r}(t) = \begin{bmatrix}b\, \cos(Q) \\ b\, \sin(Q) \\ c\, t\end{bmatrix}[/tex].
Both [tex]b[/tex] and [tex]Q[/tex] are constants. Therefore, [tex]b\, \cos(Q)[/tex] and [tex]b \sin (Q)[/tex] would also be constants with respect to [tex]t[/tex]. Hence, [tex]\displaystyle \frac{d}{dt}[b\, \cos(Q)] = 0[/tex] and [tex]\displaystyle \frac{d}{dt}[b\, \sin(Q)] = 0[/tex].
Differentiate [tex]\mathbf{r}(t)[/tex] (component-wise) with respect to time [tex]t[/tex] to find the velocity vector of this particle at time [tex]t\![/tex]:
[tex]\begin{aligned}\mathbf{v}(t) &= \frac{\rm d}{{\rm d} t} [\mathbf{r}(t)] \\ &=\frac{\rm d}{{\rm d} t} \left(\begin{bmatrix}b\, \cos(Q) \\ b\, \sin(Q) \\ c\, t\end{bmatrix}\right) \\ &= \begin{bmatrix}\displaystyle \frac{d}{dt}[b\, \cos(Q)] \\[0.5em] \displaystyle \frac{d}{dt}[b\, \sin(Q)]\\[0.5em]\displaystyle \frac{d}{dt}[c \cdot t]\end{bmatrix} = \begin{bmatrix}0 \\ 0 \\ c\end{bmatrix}\end{aligned}[/tex].
The speed [tex]v[/tex] (a scalar) of a particle is the magnitude of its velocity :
[tex]\begin{aligned}v(t) &= \| \mathbf{v}(t) \| \\ &= \left\|\begin{bmatrix}0 \\ 0 \\ c\end{bmatrix}\right\| \\ &= \sqrt{0^2 + 0^2 + c^2} = c\end{aligned}[/tex].
Therefore, the speed of this particle is constantly [tex]c[/tex] (a constant.)
A 20 cm radius ball is uniformly charged to 70 nC.
(a) What is the ball's charge density?
(b) How much charge is enclosed by spheres of radii 5, 10 and 20 cm?
(c) What is the electric field strength at points 5, 10 and 20 cm from the center?
Answer:
Explanation:
A)
Density= charge/total volume .......eqn(1)
But volume= 4/3πr^3
r= radius= 20 cm= 0.20m
If we substitute into the volume equation, we have
volume= 4/3 * 3.142 *( 0.20)^3
= 0.0335 m^3
The volume= 0.0335 m^3
Charge=71 nC= 71×10^-9
If we substitute into eqn(1) we have
Density= (71 *10^-9C )/0.0335
= 2.11µc/m^3
B) charge enclose= Density × volume
spheres of radii are
5cm
10 cm
20 cm
Volume for 5cm
V= 4/3 * 3.142 *( 0.05)^3 = 0.0005237 m^3
charge enclose=2.11µc/m^3×0.0005237
charge enclose= 2.110 nC
Volume for 10cm
V= 4/3 * 3.142 *( 0.10)^3 = 0.004189 m^3
charge enclose= 2.11µc/m^3 ×0.004189
=8.9 nC
Volume for 20cm
V= 4/3 * 3.142 *( 0.20)^3 = 0.0335 m^3
charge enclose= 71nC
It is necessary to to secure an inflated balloon tightly give reason
The resolution of a telescope is ultimately limited by the diameter of its objective lens or mirror. A typical amateur astronomer's telescope may have a 6.09 in diameter mirror. What is the minimum angular separation (in arc seconds) of two stars that can be resolved with a 6.09 in scope
Answer:
θ = 3.19 arc second
Explanation:
The resolution of a telescope is given by the rayleigh criterion, which establishes that two objects are separated if the principal maximum of diffraction of one of them coincides with the first minimum of diffraction of the second object, based on this the solution is given by the first diffraction minimum, the a slit is
a sin θ = m λ
with m = 1
in the case of circular apertures the equation must be found in polar coordinates, therefore a numerical constant is introduced
a sin θ = 1.22 λ
Angles are measured in radians and in these experiments they are small
sin θ = θ
θ= 1.22 λ / a
in this case a = 6.09 in, the wavelength is wrong = 550 10⁻⁹ m which is the maximum resolution of the human eye
l
et's reduce the magnitudes to the SI system
d = 6.09‘ 2.54 10⁻-2 m / 1 inch = 15.4686 10-2 m
let's calculate
θ = 1.22 550 10-9 / 15.468 10-2
θ = 15.5 10⁻⁶ rad
rad = 2.06 105 s
θ = 15.5 10⁻⁶ rad 2.06 105s/ 1 rad
θ = 3.19 s
A skater with an initial speed of 5.90 m/s stops propelling himself and begins to coast across the ice, eventually coming to rest. Air resistance is negligible. (a) The coefficient of kinetic friction between the ice and the skate blades is 0.0500. Find the deceleration caused by kinetic friction. (b) How far will the skater travel before coming to rest
Answer:a) - 0.4905 m/s² b) distance = 35.48 m
Explanation:
Given that
The initial velocity of the skater = 5.90 m/s
kinetic friction coefficient = 0.0500
final velocity = 0 m/s(since it comes to rest)
deceleration cause by the kinetic friction = ?
we know that
F = μN
and N= mg
Therefore;
F = μ m g....................(1)
also that
F = m a........................(2)
with our common Force, F, equating (1) and (2), we have that
m a = - μ m g
a = - μ g
a = - 0.05 × 9.81
a = - 0.4905 m/s²
The deceleration cause by the kinetic friction is a = - 0.4905 m/s²
b)
The distance the skater travels before stopping
is given as
Vf² = v₀² - 2 a x
final velocity = 0 m/s(since it comes to rest)
Therefore We have that
0 = v₀² - 2 a x
x = - v₀² / 2 a
x = 5.90² / (2 x 0.4905 )
34.81/0.981
x = 35.48 m
Or
using
v²-u² = 2aS final velocity = 0 m/s(since it comes to rest)
0²-5.90² = -2×0.4905×S
34.81=0.981S
S= 34.81/0.981
S=35.48m
The spectral classification of Antares is
Answer:
M1.5Iab-Ib
Explanation:
please help! help! help!.. Two metal spheres of the material and of equal radius R are touching each other .show the force of attraction between them is proportional to
[tex]r {4}[/tex]
Answer:
F ∞ r^4
Explanation:
I can't really write the equation here because its complex
Hope this helps:)
The space probe Deep Space 1 was launched on October 24, 1998. Its mass was 474 kg. The goal of the mission was to test a new kind of engine called an ion propulsion drive. This engine generated only a weak thrust, but it could do so over long periods of time with the consumption of only small amounts of fuel. The mission was spectacularly successful. At a thrust of 56 mN how many days were required for the probe to attain a velocity of 790 m/s (1770 mi/h), assuming that the probe started from rest and that the mass remained nearly constant
Answer:
T = 77.5 days.
Explanation:
Assuming no other forces acting on the probe, according to Newton's 2nd law, we can find the acceleration attained by the probe due to the thrust (assumed constant) as follows:[tex]a = \frac{F}{m} = \frac{56e-3N}{474kg} = 1.18 e-4 N (1)[/tex]
Since the probe started from rest, we can express the final speed applying the definition of acceleration, as follows:[tex]v_{f} = a* t (2)[/tex]
We can solve for t (in seconds) as follows:[tex]t = \frac{v_{f}}{a} = \frac{790m/s}{1.18e-4m/s2} = 6694915 s (3)[/tex]
Since 1 day = 86400 s, we can find the time in days as follows:[tex]t_{days} = \frac{t_{sec} }{1 day} = \frac{6694915s}{86400s} = 77.5 days (4)[/tex]
A sled's mass is 9 kg. It is held in place on a frictionless 16-degree slope by a rope attached to a stake at the top of the slope. What is the tension in the rope if it is parallel to the slope?
Answer:
The tension in the rope if it is parallel to the slope is 24.31 N.
Explanation:
Given;
mass of the sled, m = 9 kg
angle of inclination of the slope, θ = 16⁰
The tension in the rope if it is parallel to the slope is calculated from the parallel component of the tension;
[tex]T_|_| = mgSin \theta\\\\T_|_| = 9 \times 9.8 \times sin(16^0)\\\\T_|_| = 24.31 \ N[/tex]
Therefore, the tension in the rope if it is parallel to the slope is 24.31 N.