The rectangles in the figure below are folded along the dotted lines at 90 * angles to make a completely closed rectangle box with no overlap. What is the volume of the resulting box?

The height of the square pyramid is 35.5 in.

From the given figure we can see that the figure is a pyramid.

The base of the pyramid is a square.

The each side of base square i = 24.8 in.

The slant height is = 37.6 in.

So the right angle formed in between prism has hypotenuse = 37.6 in.

one of the rest two sides = 24.8/2 = 12.4 in.

So another side is the height of the pyramid. Let that side be = x in.

By Pythagoras Theorem we get,

(12.4)² + x² = (37.6)²

153.76 + x² = 1413.76

x² = 1413.76 - 153.76

x² = 1260

x = 35.5 (rounding off to nearest tenth and neglecting the negative value obtained from square root as length cannot be negative.)

Hence the height of the square pyramid is 35.5 in.

To know more about square pyramid here

https://brainly.com/question/22744289

#SPJ1

Answer:

x^1/4 + 8x^1/4 + 12

Step-by-step explanation:

Using the FOIL method, we get x^1/4 + 8x^1/4 + 12

Answer:

1 over 16 is not the same as 16.

1 over 16 is a fraction, which means that it represents a part of a whole. It can be written as 1/16, which means one part out of a total of sixteen equal parts.

On the other hand, 16 is a whole number, which represents a quantity of sixteen units.

So, 1/16 is not equal to 16.

Step-by-step explanation:

Kyle has $306 in his account so, right answer is Option D.

Let Kyle's money = x

Hayden's money = y

Jeremy's money = z

Given that Kyle has three times as much money in his savings account as  Hayden.

x = 3y   .....Eqn 1

Hayden has twice as much money in his savings account  as Jeremy.

z = 2y  ..... Eqn 2

Now Combined Kyle, Hayden, and Jeremy have a total of  $612.

x+y+z=612   .....Eqn 3

Putting value of x and z from Eqn 1 and 2 in Eqn 3

6y = 612

y = 106

Putting in Eqn 1;

x = 306

Thus, Kyle has $306 in his account.

The right answer is Option D.

Learn more about linear equations at:

brainly.com/question/10703930

#SPJ1

The missing side measure is equal to: A. 14.

In Mathematics and Geometry, the scale factor of a geometric figure can be calculated by dividing the dimension of the image (new figure) by the dimension of the pre-image (original figure):

Scale factor = Dimension of image (new figure)/Dimension of pre-image (original figure)

By substituting the given parameters into the formula for scale factor, we have the following;

Scale factor = Dimension of image/Dimension of pre-image

4/5.6 = 10/x

4x = 56

x = 56/4

x = 14

Read more on scale factor here: brainly.com/question/29967135

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

The equation of the line AB,with slope of -1/2 is  y = (-1/2)x + 7/2. We then use the dot product to show that the direction vectors of the lines AB and AC are orthogonal, and the coordinates of point C is (6,7).

In an orthonormal frame (o; i; j), the points A and B are given as A(3;1) and B(1;2), and the line (AC) is given by the equation 2x-y-5=0.

To determine the equation of line (AB), we need to find the slope (or gradient) of the line passing through A and B. We can find this by using the formula

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are the coordinates of two points on the line. Substituting the values of A and B, we get

slope = (2 - 1) / (1 - 3) = -1/2

Now that we have the slope, we can use the point-slope form of a line to find the equation of line (AB). Let (x,y) be any point on the line, then we have

y - 1 = (-1/2)(x - 3)

Simplifying, we get

y = (-1/2)x + 7/2

So the equation of line (AB) is y = (-1/2)x + 7/2.

To show that the direction vectors AB and AC of the lines (AB) and (AC) are orthogonal, we need to find the direction vectors of these lines and show that their dot product is zero. The direction vector of a line is just the vector that "points" in the direction of the line. To find it, we can take any two points on the line and subtract their coordinates to get a vector.

For line (AC), we can take A and C as two points on the line. Since we don't know the coordinates of C yet, we can solve the equation of line (AC) for x to get

x = (y + 5) / 2

Now substituting x by the above expression in the coordinates of point A we get

C((y + 5)/2, y)

Thus, the direction vector of line (AC) is

AC = C - A = ((y + 5)/2 - 3, y - 1) = (y/2 - 7/2, y - 1)

Similarly, we can take A and B as two points on the line (AB) to get the direction vector of line (AB):

AB = B - A = (1-3, 2-1) = (-2, 1)

Now, the dot product of AB and AC is

AB · AC = (-2)(y/2 - 7/2) + (1)(y - 1) = -y + 7

We can see that the dot product is zero when y=7. Hence, direction vectors AB and AC are orthogonal at point C(3,7).

To determine the coordinates of C, we substitute y=7 in the equation of line (AC) we obtained earlier

2x - y - 5 = 0

2x - 7 - 5 = 0

2x = 12

x = 6

Therefore, C has coordinates (6,7).

To know more about orthonormal:

https://brainly.com/question/2289152

#SPJ1

Answer:

First, you distribute the 3 into the brackets,

3(x - 2) + 5x

=3(x) + 3(-2) + 5x

=3x - 6 + 5x

Adding the like terms, 3x and 5x, gives you

=8x - 6

Step-by-step explanation:

The functions have the following characteristics:

A. They have the same y-intercept.

D. They have the same domain.

When a function f(x) is transformed by multiplying its input by a constant "a", it results in a new function g(x) = f(ax). In this case, f(x) = 2x, so when we multiply x by a constant "a", we get g(x) = f(ax) = 2ax.

Therefore, the functions f(x) = 2x and g(x) = 2ax have the same y-intercept (0,0) and the same domain (-∞, +∞).

The range of g(x) is determined by the value of "a", which is different from the range of f(x), so option C is not correct. Asymptotes are not relevant for linear functions, so option B is not correct.

Learn more about functions at https://brainly.com/question/11624077

#SPJ1

The value of k that satisfies the given condition is approximately 0.4041.

In the expansion of (1+kx)⁵, the coefficient of x⁵ is given by the term:

C(5,k) * (kx)⁵ = k⁵ * C(5,k) * x⁵

where C(5,k) is the binomial coefficient or the number of ways to choose 5 items out of k.

So, we have the equation:

k⁵ * C(5,k) = -672

We can use a table of binomial coefficients to find C(5,k) for different values of k, but this can be time-consuming. Alternatively, we can use the fact that C(5,k) = C(5,5-k) and rewrite the equation as:

k⁵ * C(5,5-k) = -672

Expanding C(5,5-k), we get:

k⁵ * C(5,5-k) = k⁵ * C(5,k) = -672

Now, we can use trial and error to solve for k. Using this method, we can find that k = -4 or k ≈ 0.4041. However, since k must be positive (since it appears as a factor in the expansion), the only valid solution is k ≈ 0.4041.

To learn more about coefficient click on,

https://brainly.com/question/14460500

#SPJ1

Answer:

A and D

Step-by-step explanation:

A- when multiplying -5 and -3 it should be positive 15.

D- when dividing 3 they just outta nowhere forgot about the negative, it should've been -5

Answer:

1.235 kg

Step-by-step explanation:

Let's assume that each packet of flour and salt weighs the same.

When we remove 7 packets of flour, we are left with 5 packets of flour and 8 packets of salt. The total number of packets is 13 and their total mass is 9.9 kg.

Therefore, the average mass of each packet is 9.9 kg ÷ 13 = 0.76 kg.

Since we know that 12 packets of flour and 8 packets of salt have a total mass of 19 kg, we can subtract the mass of the 12 packets of flour (12 × 0.76 kg = 9.12 kg) from the total mass to find the mass of the 8 packets of salt:

19 kg - 9.12 kg = 9.88 kg

Finally, we can divide the mass of the 8 packets of salt by the number of packets to find the mass of each packet:

9.88 kg ÷ 8 = 1.235 kg

Therefore, each packet of salt weighs approximately 1.235 kg.

Answer:

Step-by-step explanation:

This problem can be solved using the binomial distribution, which gives the probability of obtaining a certain number of successes in a fixed number of independent trials.

Let p be the probability that a single ibuprofen tablet has a defect, which is given as 15% or 0.15. Then, the probability that a single ibuprofen tablet does not have a defect is 1 - p = 0.85.

The acceptance sampling plan requires that at most one tablet does not meet the required specifications out of 29 tablets. This means that the shipment will be accepted if there are 0 or 1 defective tablets in the sample of 29.

The probability of getting exactly k defective tablets in a sample of n tablets is given by the binomial probability formula:

P(k) = (n choose k) * p^k * (1 - p)^(n - k)

where (n choose k) = n! / (k! * (n - k)!) is the number of ways to choose k defective tablets out of n, and ! denotes the factorial function.

To find the probability that the whole shipment will be accepted, we need to find the probability that there are 0 or 1 defective tablets in the sample of 29:

P(0 or 1 defects) = P(0 defects) + P(1 defect)

= (29 choose 0) * 0.15^0 * 0.85^29 + (29 choose 1) * 0.15^1 * 0.85^28

≈ 0.1098

Therefore, the probability that the whole shipment will be accepted is approximately 0.1098 or 10.98%

The measure of angle ∠4 is 29°, the equation is 3x = 159 and the value of x is 53

Given that, we have

∠2 = 29°

(a)

Angles 2 and 4 are vertical angles

So, we have

∠4 = 29°

(b) and (c)

We have

∠3 = (3x - 8)°

Angles 3 and 4 are angles on a straight line

So, we have the equation to be

3x - 8 + 29 = 180

Solving for x, we have

3x = 159

Divide by 3

x = 53

This means that the equation is 3x = 159 and the value of x is 53

In this section, we have the following side lengths

Lengths = 6, 8 and 10

This means that

Side lengths = 6 and 8

Hypotenuse = 10

Next, we create the right angle using the given lengths of the legs and the hypotenuse

Here, we have

R = 13

r = 8

The exact area is calculated as

A = π(R² - r²)

So, we have

A = π(13² - 8²)

Evaluate

A = 105π

For the approximate area, we have

A = 105 * 22/7

A = 330

This means that the exact area of the brick path is 105π square meters and the approximate area is 330 square meters

Read more about areas at

https://brainly.com/question/24487155

#SPJ1

The appropriate diagram to illustrate the cube is given.

A cube is a three-dimensional shape featureing six equal square faces, with its edges and vertices being of congruent length. It counts as one of the five platonic solids distinguished by all of its features having matching sizes.

The cube can be perceived as a special instance of a rectangular parallelepiped where all six are perfectly square in shape. In order to calculate the volume of such an ordinary cube, the number of its edge needs to be multiplied by itself thrice (V = a³).

Learn more about cube on

https://brainly.com/question/1972490

#SPJ1

Answer: 8.7

Step-by-step explanation:

Given:

hypotenuse = 9

Angle x =75

opposite of angle = x

Solution:

From SOH CAH TOA, use SOH

sin x = [tex]\frac{opposite}{hypotenuse}[/tex]                  > substitute

sin 75  = [tex]\frac{x}{9}[/tex]                           > multiply both sides by 9

9*sin 75 =x

x=8.7

The coordinates of each point after the quadrilateral MNPQ is translated 2 units right and 5 units down are:

M' = (x1 + 2, y1 - 5)

N' = (x2 + 2, y2 - 5)

P' = (x3 + 2, y3 - 5)

Q' = (x4 + 2, y4 - 5)

To calculate the coordinates, we shall assume that the coordinates of the points of the quadrilateral MNPQ are:

M = (x1, y1)

N = (x2, y2)

P = (x3, y3)

Q = (x4, y4)

Next, we translate the quadrilateral 2 units right and 5 units down by adding 2 to the x-coordinate and subtracting 5 from the y-coordinate of each point.

The new coordinates of the points after the translation will be:

M' = (x1 + 2, y1 - 5)

N' = (x2 + 2, y2 - 5)

P' = (x3 + 2, y3 - 5)

Q' = (x4 + 2, y4 - 5)

Therefore, the coordinates of each point after the quadrilateral is translated 2 units right and 5 units down are:

M' = (x1 + 2, y1 - 5)

N' = (x2 + 2, y2 - 5)

P' = (x3 + 2, y3 - 5)

Q' = (x4 + 2, y4 - 5)

Learn more about coordinates at brainly.com/question/31293074

#SPJ1

Question completion:

Although part of your question is missing, you might be referring to the below question:

What are the coordinates of each point after quadrilateral MNPQ is translated 2 units right and 5 units down?

The rate of change is 4/1

Answer:

( -6, 6)

Step-by-step explanation:

Answer:

5.5.5.5.5.5.5.5.5 in exponential notation is 5^9

7.7.7.7.7.7.7.7.7.7.7.7.7.7 in exponential notation is 7^13

Therefore, (5.5.5.5.5.5.5.5.5) (7.7.7.7.7.7.7.7.7.7.7.7.7.7) in exponential notation is:

5^9 * 7^13

Answer:

50° F

Step-by-step explanation:

35 - -15= 50

Check
-15 + 50 = 35

And 35 - 50 = -15

Answer:

The equation of the line parallel to 2y = x – 3 and passing through point (-4,3) in slope-intercept form is y = (1/2)x + 5.

Step-by-step explanation:

To find the equation of a line that is parallel to 2y = x – 3, we need to determine the slope of the given line.

2y = x - 3 can be written in slope-intercept form y = (1/2)x - 3/2.

The slope of this line is 1/2.

Since we want a line parallel to this line, the slope of the new line will also be 1/2.

Next, we can use the point-slope form of a line to write the equation of the new line.

Point-slope form: y - y1 = m(x - x1)

where (x1, y1) is the given point and m is the slope of the line.

Substituting the values, we get:

y - 3 = (1/2)(x - (-4))

Simplifying, we get:

y - 3 = (1/2)x + 2

Adding 3 to both sides, we get the final equation in slope-intercept form:

y = (1/2)x + 5

Therefore, the equation of the line parallel to 2y = x – 3 and passing through point (-4,3) in slope-intercept form is y = (1/2)x + 5.

The required equation of line is y = 2x

A straight line's equation is y=mx+c, where m denotes the gradient and c denotes the height at which the line crosses the y-intercept, also known as the y-axis.

Given points:

(1,2) and (2,4)

then

[tex]Slope of line = \frac{4-2}{2-1}= 2[/tex]

then

y-2 = 2(x-1)

y = 2x - 2 + 2

y = 2x

Thus, required equation of line is y = 2x

To know more about slope, visit:

brainly.com/question/3605446

#SPJ1

This statement describes the relationship between symmetries and rotations

This statement describes a relation between two symmetry operations, denoted by [tex]s_i[/tex] and [tex]s_j[/tex], and a rotation operation denoted by [tex]r_{i-j}[/tex]. The notation [tex]"s_i \circ s_i"[/tex] and [tex]"s_j \circ s_i"[/tex] denotes the composition of these operations, which means applying one operation after the other.

The statement says that [tex]s_i[/tex] and [tex]s_j[/tex] are both symmetries, and that they have a specific relationship with each other: when [tex]s_i[/tex] is composed with itself, it gives the identity operation (denoted by 1), and when [tex]s_j[/tex] is composed with [tex]s_i[/tex], it also gives the identity operation.

Then the statement concludes that this relationship implies that [tex]s_j[/tex] can be obtained by first applying [tex]s_i[/tex] and then applying a rotation operation [tex]r_{i-j}[/tex], and that [tex]s_i[/tex] can be obtained by first applying a rotation operation [tex]r_{i-j}[/tex] and then applying [tex]s_j[/tex].

Read more about symmetries and rotations at

https://brainly.com/question/2762589

#SPJ1

The solution of the matrix is [tex]4G + 2F = \begin{bmatrix}32 &-20 &-32& -8 &-40 \\-24& -28 &4 &36 &8 \\16& 24 &12 &28 &20 \\-16&-12 &0 &-40 &-36\end{bmatrix}[/tex]

A matrix is a rectangular array of numbers arranged in rows and columns. The size of a matrix is given by its dimensions, which indicate the number of rows and columns in the matrix. In this question, both matrices G and F have 4 rows and 5 columns, so we say that they are 4x5 matrices.

Scalar multiplication is performed by multiplying each element of a matrix by a scalar, which is simply a number.

Now, to find the value of 4G + 2F, we need to perform scalar multiplication on each matrix and then add the results. We get:

[tex]4G = 4 * \begin{bmatrix}8 &-5 &-8& -2 &-10 \\-6& -7 &1 &9 &2 \\4& 6 &3 &7 &5 \\-4&-3 &0 &-10 & -9\end{bmatrix}\\= \begin{bmatrix}32 &-20 &-32& -8 &-40 \\-24& -28 &4 &36 &8 \\16& 24 &12 &28 &20 \\-16&-12 &0 &-40 & -36\end{bmatrix}[/tex]

[tex]2F = 2 * \begin{bmatrix}1 &8 &-2& -5 &9 \\-9& 10 &6 &-3 &0 \\4& 5 &-4 &3 &7 \\2&-10 &-6 &-1 & -8\end{bmatrix}= \begin{bmatrix}2 &16 &-4& -10 &18 \\-18& 20 &12 &-6 &0\\8& 10 &-8 &6 &14 \\4&-20 &-12 &-2 & -16\end{bmatrix}[/tex]

Now, we can perform matrix addition on 4G and 2F to get:

[tex]4G + 2F = \begin{bmatrix}32 &-20 &-32& -8 &-40 \\-24& -28 &4 &36 &8 \\16& 24 &12 &28 &20 \\-16&-12 &0 &-40 &-36\end{bmatrix}[/tex]

Therefore, the value of 4G + 2F is the 4x5 matrix given above.

To know more about matrix here

https://brainly.com/question/28180105

#SPJ1

The volume of the composite figure made of a cone and cylinder is derived to be equal to 3388 cubic feet.

We shall calculate for the volumes of the cone and the cylinder, the sum of each volume will give the volume of the composite figure

The cone have;

radius = 7 ft

height = 34ft - 16ft = 18ft

Volume of the cone = 1/3 × 22/7 × 7ft × 7ft × 18ft

Volume of the cone = (22 × 7 × 6) ft³

Volume of the cone = 924 ft³

The cylinder have;

radius = 7 ft

height = 16 ft

Volume of the cylinder = 22/7 × 7ft × 7ft × 16ft

Volume of the cylinder = (22 × 7 × 16) ft³

Volume of the cylinder = 2464 ft³

Volume of the composite figure = 924 ft³ + 2464 ft³

Volume of the composite figure = 3388 ft³

Therefore, the volume of the composite figure made of a cone and cylinder is derived to be equal to 3388 cubic feet.

Read more about volume here:https://brainly.com/question/23935577

#SPJ1

Answer:

do it by yourself what you do while teacher is teaching