The ISS can, at times, be seen from Earth.

True or false

Answer:

At the topmost point where the velocity has only horizontal component whereas the acceleration is vertical.

Explanation:

There is only a horizontal component of velocity at the ap3x of the projectile, and acceleration is vertically downwards owing to gravitation, therefore velocity and acceleration are perpendicular to one another.

The vessel's average speed for the entire journey will be 5.86 knots. The area of the distance-time graph shows the velocity.

Distance is a numerical representation of the distance between two objects or locations.

Distance can refer to a physical length or an estimate based on other factors in physics or common use. |AB| is a symbol for the distance between two points A and B.

The given data in the problem is;

Distance travelled 1 (D₁)= 6 nautical miles

Velocity (V₁) 8 knots.

Time (T₁)=

Distance travelled 2 (D₂)=5 nautical miles,

Time taken(T₂)=45 minutes=0.75 hour

Time taken(T₃)=30 minutes

Time for anchor 1 (t₁)=1 hour

Time for anchor 2(t₂)=0.5 hour

Time to sailing back to port(t₄) = 1 hour

The time for the first phase of motion;

[tex]\rm d = v\times t \\\\ t_1= \frac{D_1}{v} \\\\ t_1= \frac{6}{8} \\\\ t_1= 0.75 \ houe[/tex]

The average speed is found as;

[tex]\rm V_{avg}= \frac{Total \ distance }{Total \ time } \\\\ \rm V_{avg}= \frac{6+5+6+5}{0.75+0.5+1+0.5+1} \\\\ V_{avg}=5.866 \ knots[/tex]

Hence, the vessel's average speed for the entire journey will be 5.86 knots.

To learn more about the distance, refer to the link;

https://brainly.com/question/26711747

#SPJ1

pH water = 7 = [H⁺] = 10⁻⁷

Mr. Galonski one hundred times more acidic than water = 100 times more H⁺ = 10⁻⁵ ⇒ pH = 5

Baron von Base has a pH of 11

The furthest from neutral (pH=7) on the pH scale = Baron von Base

The magnitude of the change in momentum of the driver is 3900kgm/s.

Hence option D) 3900 kg • meters per second is the correct answer.

Momentum is simply the product of the mass of an object and its velocity.

Its is expressed as;

P = m × v

Where m is the mass of the object and v is its velocity.

Given the data in the question;

We substitute the given values into the expression above to determine the initial momentum of the driver before he was brought to rest.

P initial = m × v

P initial = 125kg × 31m/s

P initial = 3875 kgm/s ≈ 3900kgm/s

Now, as the driver is brought to rest, final velocity becomes zero

P final = 125kg × 0

P final = 0

This means that the change in momentum of the driver is his initial momentum which is 3900kgm/s.

Therefore, the magnitude of the change in momentum of the driver is 3900kgm/s.

Hence option D) 3900 kg • meters per second is the correct answer.

Learn more about momentum here: brainly.com/question/14952164

#SPJ4

Answer:

D for edge

Explanation:

GO GO GO TRUST ME

Answer:V=13500m/s

As

V=fλ

Where v is velocity, f is frequency and λ is the wavelength

f=27hz or 27/s

λ=0.50km=0.50*1000m=500m

Putting given values in the formula

V=(27/s)*(500m)

V=13500m/sss

The count of the number of tools is fundamental because it allows us to design a suitable experimental procedure.

An experimental procedure is a step of the scientific method based on a process to validate or reject our working hypothesis.

The experimental procedure needs to have into account the different tools required for the experiment to be carried out by the researcher.

In conclusion, the count of the number of tools is fundamental because it allows us to design a suitable experimental procedure.

Learn more about the experimental procedure here:

https://brainly.com/question/17274244

#SPJ1

The dust, accumulated at the time of the formation of the solar system that are  preserved in asteroids, meteoroids, and meteorites are called chondrules.

The solar system is composed of the earth and the planets. The solar system was formed millions of years ago.

The dust, accumulated at the time of the formation of the solar system that are  preserved in asteroids, meteoroids, and meteorites are called chondrules.

Learn more about meteoroids:https://brainly.com/question/1939309

#SPJ1

True,Voltage is only produced when the wire is moving but not when the magnet is moving.

The physical interplay of electric charges, magnetic moments, and the electromagnetic field is known as electromagnetism.

The electromagnetic field can be static, moving slowly, or forming waves. Electromagnetic waves are commonly referred to as light and are subject to optics laws.

True,Voltage is only produced when the wire is moving but not when the magnet is moving.

To learn more about the electromagnetism, refer to the link;

https://brainly.com/question/3427992

#SPJ1

Answer:

The pressure of the gas will increase

Explanation:

When gas is put into a container, for example, a balloon, the gas expands to fill the space it can occupy. Since gas is not a solid or a liquid, its particles are all over the place - they are constantly moving and vibrating. As such, when too much gas is blown into a balloon, it will pop. So, when the volume of the container decreases, the pressure of the gas will increase the smaller it gets. Vice versa, the greater the space, the less pressure that will be present in the container.

The lower limit that could be used to determine the position of each object along the direction of the velocity is 1.136 x 10⁻³ m.

The uncertainty in the position of the electron is calculated as follows;

[tex]\Delta x = \frac{h}{4\pi m\Delta v}[/tex]

where;

[tex]\Delta x = \frac{6.63 \times 10^{-34} }{4\pi \times 9.11 \times 10^{-31} \times 0.051} \\\\\Delta x = 1.136 \times 10^{-3} \ m[/tex]

Thus, the lower limit that could be used to determine the position of each object along the direction of the velocity is 1.136 x 10⁻³ m.

Learn more about uncertainty in position here: https://brainly.com/question/1970053

#SPJ1

Answer:

when two electrons are in close proximity Each atom's electron begins to detect the proton of the other atom. As a result, it is attracted to not just its own proton, but also the proton of the other atom.

The force advantage of the direction changing pulley shown  is 1. The correct option is b.

Force is the mechanical physical quantity. The force advantage is equivalent to the mechanical advantage equal to the ratio of output to the input force.

In the single fixed pulley, there is only one rope segment that pulls up on the load, so,

The force advantage is

F.A = 50 N / 50 N  = 1

Thus, the force advantage of the direction changing pulley shown  is 1. The correct option is b.

Learn more about force advantage.

https://brainly.com/question/16558799

#SPJ1

The conclusion v₁=v₂ can not be made. Let u=(1,1,1),v₁=(2,3,-5),v₂=(4,-1,-3). The dot product of u.v₁=uv₂ is satisfied,but v₁≠v₂.The correct answer is c.

The dot product, also known as the scalar product, is an algebraic operation that yields a single integer from two equal-length sequences of numbers.

The dot product of two vectors' Cartesian coordinates is commonly used in Euclidean geometry.

Because there may be more than the 1 vectors satisfying the expression.

[tex]\rm uv_1 = 1 \times 2 +1 \times 3 +1 \times(-5)=0[/tex]

[tex]\rm uv_2= 4-1-3 =0[/tex]

The v₁ is not found equal to the v₂.

The conclusion v₁=v₂ can not be made. Let u=(1,1,1),v₁=(2,3,-5),v₂=(4,-1,-3). The dot product of u.v₁=uv₂ is satisfied,but v₁≠v₂.The correct answer is c.

Hence, the correct answer is c.

To learn more about the dot product, refer to the link;

https://brainly.com/question/26550859

#SPJ4

Answer:

Length -> meter

Mass -> kilogram

Time -> second

g for gram

mg for milligram

t for time

μm for micrometer

ms for millisecond

300cm = 3m

500g = 0.5kg

1500m = 1.5km

250ms = 0.25s

3.65×10^4g = 36.5kg

Answer:

1. By streching

2. false

3. building stronger muscles and bones

4. riding your bike

Explanation:

The routine of exercise begins with the usual basic step of stretching the body.

An essential component of a healthy lifestyle is exercise. Exercise can help you cope with stress and prevent health issues while also enhancing energy and strength. It can also help you control your appetite and keep your weight in a healthy range.

Here,

1. The routine of exercise begins with the usual basic step of stretching the body.

2. People don't have to necessarily go to the gym to get exercise, because exercise includes the activities from the basic one to difficult methods. So, you can do some kind of exercise at the home itself. So, the statement is false.

3. An advantage to exercising is building stronger muscles and bones.

4. Riding your bike is an example of exercise.

Hence,

The routine of exercise begins with the usual basic step of stretching the body.

To learn more about exercise, click:

https://brainly.com/question/13128077

#SPJ2

The Properties of good conductor are given below:

Explanation:

1.It posses very low resistance or specific resistance.

2.It posses more conductance and there by conducts electricity readily through it.

3.It is a good conductor of heat.

4.It is highly resistance to corrosion by liquid.

5.It must be malleable and ductile.

6.It must be flexible.

7.It should not react with climatic conditions.

8.It can be drawn in very fine wires.

The value of change in kinetic energy, when fish with mass 0. 65 kg is leaping to the right at 15 m/s, is 93.1 J.

Kinetic energy is a type of energy, which a body is posses due to its motion. The kinetic energy of a body can be found with the following formula,

[tex]KE=\dfrac{1}{2}mv^2[/tex]

Here, (m) is the mass of the body, and (v) is the speed of the body.

When the two objects collides, then the initial collision of the two body is equal to the final collision of two bodies by the law of conservation of momentum.

[tex]m_1u_1 + m_2u_2 = (m_1+m_2)v[/tex]

Here, (m) is the mass, (u) is initial velocity before collision, v is final velocity after collision and (subscript 1,2) are used for fish 1 and 2.

The mass of the first fish is 0. 65 kg. This fish leaping to the right at 15.0 m/s collides inelastically with another fish with mass 0.950 kg leaping to the left at 13.5 m/s. Put the values,

[tex]m_1u_1 + m_2u_2 = (m_1+m_2)v\\0.65\times15 +0.95\times(-13.5) = (0.65 + 0.95)\times v[/tex]

The value of initial velocity of the second fish is taken negative as it is leaping to the left.

[tex]0.65\times15 +0.95\times(-13.5) = (0.65 + 0.95)\times v\\v=-\dfrac{3.075}{1.6}\\v=-1.9219\rm\; m/s[/tex]

This is the final velocity. Now to find the change in kinetic energy use the formula of kinetic energy,

[tex]\Delta KE=\dfrac{1}{2}(0.65)(12-(-1.9219))^2\\\Delta KE=93.1\rm\; J[/tex]

Thus, the value of change in kinetic energy, when fish with mass 0. 65 kg is leaping to the right at 15 m/s, is 93.1 J.

Learn more about the kinetic energy here;

https://brainly.com/question/25959744

#SPJ4

Answer:

number 1 is ( Some objects fall faster than other objects due to air  resistance . If there is no air resistance , then all objects will fall at the same rate.)  number two is (How do parachutes use air resistance to help skydivers land safely (page 3)? The air resistance overwhelms  the doward force of gravity.) Explanation:

Answer:

15 kg

Explanation:

KE = 1/2 * m * v²   ⇒  m = (2*KE) / v²

m = (2*480) / 8²

m=15 kg

The question is maya most likely trying to answer is, how does the thickness of the wire affect the strength of an electromagnet?

From the experimental set-up by maya, we can determine the effect of thickness of wire on strength of electromagnet.

R ∝ 1/A

where;

As the thickness of the wire increases, the area of the wire increases and the resistance of the wire will decrease. As the resistance of the wire decreases, the current flowing in the wire increases as well.

Thus, the increase in the thickness of a wires increases, the strength of an electromagnet.

Learn more about strength of an electromagnet here: https://brainly.com/question/2331156

#SPJ4

Answer:

A

Explanation:

The ideal mechanical advantage will be 8.017. The ideal mechanical advantage value may be grater than the actual value of mechanical advantage.

Mechanical advantage is a measure of the ratio of output force to input force in a system, it is used to obtained efficiency of  forces in levers and pulley.

The ideal mechanical advantage is found as;

[tex]\rm IMA = \frac{d \pi}{l} \\\\ \rm IMA = \frac{0.812 \times \pi}{0.318} \\\\ IMA=8.017[/tex]

The ideal mechanical advantage will be 8.017.

To learn more about the mechanical advantage, refer to the link;

https://brainly.com/question/7638820

#SPJ1

Answer:

60

Explanation

Dont judge me but I convert 1.3 hours to 78 minutes, then divide with 3.0 and we end up with 60C

The amount of charge that passes through a 3.0 amp television in 1.3 hours would be 14040 Coulombs.

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.

I = Q / T

As given in the problem, we have to find out what amount of charge passes through a 3.0 amp television in 1.3 hours.

Let us first convert the time period of hours into seconds

1 hour = 3600 seconds

1.3 hours = 1.3 × 3600 seconds

               =  4680 seconds

By using the above relation between electric current and electric charge

and by substituting the respective values of the charge and the time period

I = Q / T

3 = Q / 4680

Q = 3 × 4680

   = 14040 Coulombs

Thus, the amount of charge that passes through a 3.0 amp television in 1.3 hours would be 14040 Coulombs.

To learn more about an electric charge from here, refer to the link given below ;

brainly.com/question/8163163

#SPJ5

The amount of exhaust heat discharged per hour from the plant which produces electric energy at the rate of 1. 5 gw, is 9.36×10¹⁹ J/h.

The heat is discharged per hour is equal to the different of total power and actual power.

The plant produces electric energy at the rate of 1. 5 gw. Let assume the efficiency of this power plant is 64% between the temperature of 660 degree C to 330 degree Celsius.

Thus, the maximum efficiency is,

[tex]\eta_{max}=1-\dfrac{660+273}{330+273}\\\eta_{max}=0.55[/tex]

The total power is,

[tex]P_t=\dfrac{P_A}{\eta_{max}\times0.64}\\P_t=\dfrac{1.5}{0.55\times0.64}\\P_t=4.26\rm\; GW[/tex]

Thus, the heat discharged per hour is,

[tex]Q=4.26-1.5\\Q=2.76\text{GW}\\[/tex]

Multiply the value with 3600 to convert it in s/h,

[tex]Q=2.76\times10^9\times3600\text{ J/h}\\Q=9.36\times10^{19}\text{ J/h}\\[/tex]

Thus, the amount of exhaust heat discharged per hour from the plant which produces electric energy at the rate of 1. 5 gw, is 9.36×10¹⁹ J/h.

Learn more about the heat discharged per hour here;

https://brainly.com/question/19666326

#SPJ4

The value of maximum voltage, when the capacitor can withstand a peak voltage of 670 v is 47.6 volts.

Resonance frequency is the natural frequency of an particle or object. At this frequency, the object tries to vibrate at higher amplitude. It can be calculated with the following formula:

[tex]f=\dfrac{1}{2\pi LC}[/tex]

Here, L is the induction and C is the capacitance.

Let for an L-R-C circuit, the value of resistance is 400 ohm, induction is 0.380 Haney and capacitance is 1.20×10⁻² μF.

Put the values in above formula,

[tex]f=\dfrac{1}{2\pi(0.380)(1.20\times10^{-8})}\\f=2356.8\rm\; Hz[/tex]

The capacitor can withstand a peak voltage of 670 v. Use the following formula to find the value of current as,

[tex]I=2\pi fC\times Vc\\I=2\pi (2356.8)(1.20\times10^{-8})\times 670\\I=0.119\rm\; A[/tex]

The value of resistance is 400 ohms. Thus, the voltage is,

[tex]V=IR\\V=(0.119)(400)\\V=47.6\rm\; V[/tex]

Thus, the value of maximum voltage, when the capacitor can withstand a peak voltage of 670 v is 47.6 volts.

Learn more about the resonance frequency here:

https://brainly.com/question/3292140

#SPJ4

you cant what done is done unless you start over. well think of a game it is its own dimension created by man for our entertainment but its not perfect there are glitches and modifications. but you are not the main character only one is and He gives us our own controler our brain. but if your athiest then ask me in the comments. i can explain both ways

Answer:

The world as we know it has three dimensions of space—length, width, and depth—and one dimension of time. But there's the mind-bending possibility that many more dimensions exist out there. According to string theory, one of the leading physics models of the last half-century, the universe operates with 10 dimensions. A dimension arises when a force is generated that allows movement into a new domain. Yes, I personally do believe in them for reasons I can't explain. Dimensional shifts were a phenomenon whereby an object or person is transported from one location to another via folded-space transport or shifted to a parallel universe on a different dimensional plane.

Explanation:

Have a great rest of your day
#TheWizzer