The fraction of the substance remaining is 6.25%.
What is the amount left?The amount of substance left is calculated as follows;
N = N₀(1/2)^(t/T)
where;
N₀ is the initial amount of the substanceN is the amount remaining after time tT is the half-life of the substance,
we have;
N₀ = 100g,
T = 5670 years, and
t = 22680 years
N = 100 x (1/2)^(22680/5670)
N = 6.25 g
The fraction remaining is calculated as follows
fraction remaining = N/N₀
fraction remaining = 6.25/100
fraction remaining = 0.0625 or 6.25%
Learn more about half life here: https://brainly.com/question/2320811
#SPJ1
what needs to happen to the index of refraction to produce a rainbow
To produce a rainbow, the index of refraction needs to vary with wavelength, which causes the different colors of light to refract at slightly different angles.
This occurs when light enters a water droplet and is bent, or refracted, as it slows down due to the higher index of refraction of water compared to air. The different colors of light then reflect off the inner surface of the droplet and are refracted again as they exit the droplet, creating a spectrum of colors. This process is called dispersion and is what creates the beautiful colors of a rainbow.
To produce a rainbow, the index of refraction needs to vary with the wavelength of light. This phenomenon, called dispersion, causes different colors (wavelengths) of light to bend at slightly different angles when passing through a medium like water droplets in the atmosphere. The variation in the index of refraction leads to the separation of colors and the formation of a rainbow.
Learn more about refraction here:-
https://brainly.com/question/14760207
#SPJ11
A 200-kg machine is attached to the end of a cantilever beam of length L=
2. 5 m, elastic modulus E= 200x109 N/m2
, and area moment of inertia I =
1. 8x10–6 m4. Assuming the mass of the beam is small compared to the mass
of the machine, what is the stiffness of the beam?
The cantilever beam has a stiffness of 2074.4 N/m, meaning it needs 2074.4 N of force to produce a unit of deflection. The beam's mass is assumed to be insignificant compared to the machine's mass, which is valid for calculating its stiffness.
The stiffness of a beam is defined as the amount of force required to produce a unit of deflection. In this case, we need to find the stiffness of the cantilever beam given the machine's mass, the beam's length, elastic modulus, and area moment of inertia.
To determine the stiffness, we can use the equation:
Stiffness (k) = [tex](3 \times E \times I) / L^3[/tex]
Where E is the elastic modulus, I is the area moment of inertia, and L is the length of the beam. Substituting the given values, we get:
[tex]k = (3 \times 200 \times 10^9 N/m^2 \times 1.8 \times 10^{-6} m^4) / (2.5 m)^3[/tex]
Simplifying this equation gives:
k = 2074.4 N/m
Therefore, the stiffness of the cantilever beam is 2074.4 N/m, which means that it requires a force of 2074.4 N to produce a unit of deflection. It is important to note that the mass of the beam was assumed to be negligible compared to the mass of the machine, which is a valid assumption for the calculation of the beam's stiffness.
To know more about force refer here:
https://brainly.com/question/26115859#
#SPJ11
you pull a friend up a 50 m rocky slope with tension force in the rope of 490 N the slope is very steep what work will you need to do in order to pull up your friend
Explanation:
F x d = work
490 N * 50 m = 24 500 J of work
how does the epa calculator determine co2 for gas VS electric cars?
Answer:
The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.
Explanation:
The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.
Ice (the solid phase of water) has a lower density than water because:
Choose which has more gravitational energy
odiver with a mass of 450 n diving from a height of 20 feet
diver has a mass of 400 n standing at a height of 20 feet
diver with a mass of 450 n standing at a height of 20 feet
Based on the given information, the diver with a mass of 450 N standing at a height of 20 feet has more gravitational potential energy.
Gravitational potential energy can be calculated using the formula: PE = mgh, where PE represents potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point.
In this case, the diver with a mass of 450 N at a height of 20 feet has a greater mass, resulting in a higher gravitational potential energy compared to the diver with a mass of 400 N at the same height.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
Please help me
how do elliptical galaxies typically compare to spiral galaxies?
a. elliptical are redder and rounder
b. elliptical are always much smaller
c. elliptical are bluer and flattened
d. elliptical are blue and rounded
e. elliptical galaxies are redder and flattened
Elliptical are redder and rounder than spiral galaxies. Option a is correct.
Elliptical galaxies are redder and rounder than spiral galaxies. Elliptical galaxies are so named because they have a shape that ranges from nearly spherical to highly elongated. They are generally redder than spiral galaxies, as they contain an older population of stars that are cooler and emit less blue light.
Spiral galaxies, on the other hand, are typically bluer due to their younger, hotter stars that emit more blue light. Elliptical galaxies also lack the distinctive spiral arms and central bulge of spiral galaxies, making them appear rounder in shape. The correct answer is (a).
To know more about galaxies, here
brainly.com/question/31361315
#SPJ4
When removing a wool sweater, a static discharge of 6. 43 µC dissipates 5. 72 10-3 J of energy. What voltage was involved?
The voltage involved in the static discharge is 2.98 kV (kilovolts).
The voltage involved in a static discharge can be determined using the equation:
V = √(2E/q)
where V is the voltage, E is the energy dissipated, and q is the charge involved in the discharge.
Substituting the given values, we get:
V = √(2 * 5.72 x [tex]10^{-3[/tex]J / 6.43 x [tex]10^{-6[/tex] C)
V = √(8.889 J/C)
V = 2.98 x [tex]10^3[/tex] V
It's worth noting that static electricity is a common phenomenon that occurs when two objects with different electrical charges come into contact and then separate.
The friction between the objects can cause electrons to transfer from one object to the other, resulting in a buildup of charge.
When the charge buildup becomes large enough, a static discharge can occur, which can be seen as a spark or shock.
Understanding the properties and behavior of static electricity is important in many areas of science and technology, from materials science and electronics to meteorology and environmental science.
To know more about static discharge refer here
https://brainly.com/question/30525800#
#SPJ11
Nerve impulses travel through your nervous system from neurons to other neurons or body structures
The statement "Nerve impulses travel through your nervous system from neurons to other neurons or body structures" is true because they allow us to perceive and respond to the world around us.
Nerve impulses, also known as action potentials, travel through the nervous system from neurons to other neurons or body structures such as muscles and glands. This communication between neurons is what allows us to perceive, process, and respond to information from our environment.
The process of nerve impulse transmission begins when a neuron is stimulated by a change in its environment. This change can be chemical, mechanical, or electrical. Once the neuron is stimulated, it generates an electrical signal that travels down its axon, a long extension of the neuron.
The electrical signal, or nerve impulse, travels down the axon until it reaches the end of the neuron, known as the axon terminal. At the axon terminal, the impulse triggers the release of neurotransmitters, which are chemical messengers that carry the impulse across the synaptic gap to the next neuron or body structure.
In summary, nerve impulses travel through the nervous system from neurons to other neurons or body structures, allowing us to perceive and respond to the world around us.
To know more about nervous system refer here:
https://brainly.com/question/29355295#
#SPJ11
Complete Question:
Nerve impulses travel through your nervous system from neurons to other neurons or body structures. True or False.
Question 5 of 15
In which reaction are the atoms of elements rearranged?
O A. Two isotopes of hydrogen fuse to form helium.
O B. Uranium-235 breaks apart into krypton, barium, and three
neutrons.
O C. Methane gas combines with oxygen to form carbon dioxide and
water.
O D. Plutonium-240 breaks apart into xenon, zirconium, and three
neutrons.
SUBMIT
The correct answer is C. Methane gas combines with oxygen to form carbon dioxide and water.
Methane gas combines with oxygen to form carbon dioxide and water. This is a chemical reaction where the atoms of the reactants (methane and oxygen) are rearranged to form the products (carbon dioxide and water). In the other reactions mentioned, either nuclear fusion or nuclear fission occurs, which involves changes in the nuclei of the atoms, but not a rearrangement of the atoms themselves.
Know more about Methane Gas here:
https://brainly.com/question/12645635
#SPJ11
You hold a meter stick at one end with the same mass suspended at the opposite end. Rank the torque needed to keep the stick steady, from largest to smallest
The torque needed to keep the stick steady, ranked from largest to smallest, would be: highest when the suspended mass is at the far end of the stick, lower when the suspended mass is closer to the pivot point, and lowest when the suspended mass is at the pivot point itself.
To rank the torque needed to keep the stick steady from largest to smallest, we need to consider the factors that affect torque.
Torque is the rotational equivalent of force, and it depends on the distance between the pivot point (the end of the meter stick you are holding) and the point where the force is applied (the suspended mass), as well as the magnitude of the force.
In this scenario, the torque needed to keep the stick steady will be highest when the suspended mass is at the far end of the stick, i.e. as far away from the pivot point as possible.
This is because the greater the distance between the pivot point and the force, the more torque is required to counteract the force's rotational effect. Therefore, the torque needed to keep the stick steady will be highest when the suspended mass is at the end of the meter stick farthest away from the pivot point.
Conversely, the torque needed to keep the stick steady will be lowest when the suspended mass is at the pivot point itself, as there is no rotational effect to counteract in this scenario.
Therefore, the torque needed to keep the stick steady will be lowest when the suspended mass is at the end of the meter stick closest to the pivot point.
To know more about torque refer here
https://brainly.com/question/25708791#
#SPJ11
CASE BASED QUESTION
if two or more resistance or connected in such a way that the same potential difference get applied to each of them,then they are said to be connected in the parallel. The current flowing through the two resistors in parallel is , however not the same. When we have to or more resistances joined in parallel to one other then the same current get additional paths to flow and the overall resistance decreases. The equivalent resistance is given by 1/Rp=1/R1 + 1/R2 +1/R3.
(1)Three resistances,2 ohm , 6 ohm , 8 ohm are connected in parallel , then the equivalent resistance is
(2) a wire of resistance 12 ohm is cut into 3 equal pieces and then twisted their ends together then the equivalent resistance is
When three resistances (2 ohms, 6 ohms, 8 ohms) are connected in parallel their equivalent resistance is 24/13 ohms, and when a wire of resistance 12 ohms is cut into 3 equal pieces its equivalent resistance is 4/3 ohms.
(1) To find the equivalent resistance of three resistances (2 ohms, 6 ohms, 8 ohms) connected in parallel, we can use the formula 1/Rp = 1/R1 + 1/R2 + 1/R3.
1/Rp = 1/2 + 1/6 + 1/8
1/Rp = 6/24 + 4/24 + 3/24
1/Rp = 13/24
To find Rp, take the reciprocal:
Rp = 24/13
So, the equivalent resistance is 24/13 ohms.
(2) When a wire of resistance 12 ohms is cut into 3 equal pieces, each piece will have a resistance of 12/3 = 4 ohms. If these pieces are connected in parallel, we can use the same formula as before:
1/Rp = 1/4 + 1/4 + 1/4
1/Rp = 3/4
Taking the reciprocal:
Rp = 4/3 ohms
So, the equivalent resistance is 4/3 ohms.
Know more about equivalent resistance here:
https://brainly.com/question/21082756
#SPJ11
Why does the tail of a comet point away from the sun.
The tail of a comet points away from the sun due to the effect of solar wind. Solar wind is a stream of charged particles that flow outward from the sun at high speeds.
When these particles interact with the comet, they cause the material that makes up the coma and tail of the comet to be pushed away from the sun. This effect is called radiation pressure.
The radiation pressure is stronger on the side of the comet facing the sun, so the tail is pushed away from the sun. This is why the tail of a comet always points away from the sun.
Know more about radiation pressure here
https://brainly.com/question/18120262#
#SPJ11
What kind of acceleration occurs when an object speeds up?
Ans. positive acceleration
When an object is speeding up, the acceleration is in the same direction as the velocity. Thus, this object has a positive acceleration.
What is the speed of the wave of its frequency is 8.0 hertz?
The speed of the wave is 16 m/s. And the right option is B. 16 m/s.
What is speed?Speed is the rate of change of displacement.
To calculate the speed of the wave, we use the formula below
Formula:
v = λf....................... Equation 1Where:
v = Velocity of the waveλ = Wavelength of wavef = Frequency of the waveFrom the question,
Given:
λ = 6/3 = 2 mf = 8 HzSubstitute these values into equation 1
v = 2×8v = 16 m/sLearn more about speed here: https://brainly.com/question/24739297
#SPJ1
What does the square of the wave function represent?.
The wave function is a mathematical function that describes the behavior of a particle in terms of its wave-like properties, and it satisfies the Schrödinger equation.
The wave function itself cannot be directly measured or observed, but rather it is used to calculate probabilities of different outcomes of measurements.
The square of the wave function, on the other hand, gives a measurable quantity - the probability density - which can be used to calculate the likelihood of finding a particle in a particular location.
In quantum mechanics, the square of the wave function, denoted as
|Ψ[tex](x)|^2[/tex], gives the probability density of finding a particle at a particular location in space. The probability density is proportional to the probability of finding the particle at a specific position.
The wave function itself, denoted as Ψ(x), gives the complete description of the quantum state of the particle, including its energy, momentum, and other properties.
To know more about wave function refer here
https://brainly.com/question/17484291#
#SPJ11
A 2000-kg ferris wheel accelerates from rest to an angular speed of 20 rad/s in 12 s. approximate the ferris wheel as a circular disk with a radius of 30 m. what is the net torque on the wheel
The net torque on the Ferris wheel is approximately 1,500,000 N*m.
To find the net torque on the Ferris wheel, we'll need to use the following formula: τ = I * α, where τ represents torque, I is the moment of inertia, and α is the angular acceleration.
First, we need to find the angular acceleration (α). Since the Ferris wheel accelerates from rest (initial angular speed = 0) to an angular speed of 20 rad/s in 12 s, we can use the formula: α = (final angular speed - initial angular speed) / time.
α = (20 rad/s - 0 rad/s) / 12 s = 20/12 rad/s² = 5/3 rad/s²
Next, we'll find the moment of inertia (I) for a circular disk with a mass (m) of 2000 kg and a radius (r) of 30 m: I = (1/2) * m * r².
I = (1/2) * 2000 kg * (30 m)² = 1000 kg * 900 m² = 900,000 kg*m²
Now, we can find the net torque (τ) using the formula: τ = I * α.
τ = 900,000 kg*m² * 5/3 rad/s² ≈ 1,500,000 N*m
So, the net torque on the Ferris wheel is approximately 1,500,000 N*m.
To learn more about inertia, refer below:
https://brainly.com/question/3268780
#SPJ11
Based on information in the article, which of these
statements is TRUE?
A. The sun's gravity makes the planets orbit
around it.
B. Earth's gravity pulls floating astronauts to
Earth's floor.
C. Only large objects have a pull of gravity on
Earth.
D. Gravity keeps the planets moving in a straight
line.
Based on information the statement that is true is A. The sun's gravity makes the planets orbit around it.
What is the justification?Gravity is a fundamental force of nature that exists between all objects with mass or energy. The force of gravity depends on the mass of the objects and the distance between them. In the case of the solar system, the sun's gravity is the dominant force that controls the motion of the planets.
The planets are constantly pulled towards the sun by its gravitational force, causing them to orbit around it in elliptical paths. This is known as Kepler's laws of planetary motion.
Learn more about Gravity at:
https://brainly.com/question/557206
#SPJ1
Charges of 4. 0 PC and -6. 0 PC are placed at two corners of an equilateral triangle with sides of 0. 10 m. What is
the magnitude of the electric field created by these two charges at the third corner of the triangle?
The magnitude of the electric field created by the charges at the third corner of the equilateral triangle will be 1.8 x 10¹⁴N/C.
The magnitude of the electric field at the third corner of the equilateral triangle can be found using Coulomb's law, which states that the magnitude of the electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. The electric field is defined as the force per unit charge.
Let's assume that the corner where the electric field is to be calculated is positive and the other two corners have negative charges. Let Q₁ = +4.0 PC and Q₂ = -6.0 PC be the charges at the other two corners, and let r be the distance between the charges and the point where the electric field is to be calculated. Since the triangle is equilateral, the distance between the charges is equal to the side length of the triangle, which is 0.10 m.
The magnitude of the electric field at the third corner can be calculated as follows:
= k * |Q₁ + Q₂| / r²
where k is the Coulomb constant, which is equal to 9.0 x 10⁹ N·m²/C².
Substituting the values, we get:
E = 9.0 x 10⁹ N·m²/C² * |4.0 PC - 6.0 PC| / (0.10 m)²
E = 9.0 x 10₉ N·m²/C² * 2.0 PC / 0.01 m²
E = 1.8 x 10¹⁴N/C
Therefore, the magnitude of the electric field created by the charges at the third corner of the equilateral triangle is 1.8 x 10¹⁴N/C.
To know more about magnitude
https://brainly.com/question/16815247
#SPJ4
A block of weight 500n is pushed up a slope by a force of 250n.assume there is no friction .calculate a.ama b.vr c.the length of the slope if the height of the slope is 10m.
a. The mechanical advantage is 2.
b. The length of the slope (input distance) is 5 meters.
a. To calculate the mechanical advantage (MA) in this scenario, we can use the formula:
MA = F_out / F_in
where F_out is the output force (the weight of the block) and F_in is the input force (the force applied to push the block).
In this case, the weight of the block is 500 N (newtons) and the force applied to push the block is 250 N.
MA = 500 N / 250 N
MA = 2
Therefore, the mechanical advantage is 2.
b. To calculate the velocity ratio (VR), we can use the formula:
VR = d_out / d_in
where d_out is the output distance (the height the block is lifted) and d_in is the input distance (the length of the slope).
In this case, the height of the slope is given as 10 m.
VR = 10 m / d_in
To find the input distance (d_in), we need to rearrange the formula:
d_in = d_out / VR
Since the mechanical advantage (MA) is equal to the velocity ratio (VR) in an ideal scenario without friction, we can substitute the MA value of 2 into the formula:
d_in = 10 m / 2
d_in = 5 m
Therefore, the length of the slope (input distance) is 5 meters.
To know more about mechanical refer here
https://brainly.com/question/20434227#
#SPJ11
A roller coaster has a cart with a mass of 150 kg and a track that spans 75 meters. what is the average velocity of the cart if it took 3 minutes to complete the track?
The average velocity of the 150 kg cart on the 75-meter roller coaster track is approximately 0.42 meters per second.
To find the average velocity of the cart, we need to use the formula:
Average velocity = Total displacement / Total time
In this case, the total displacement is 75 meters (the length of the track) and the total time is 3 minutes, which we need to convert to seconds (1 minute = 60 seconds, so 3 minutes = 180 seconds).
Average velocity = 75 meters / 180 seconds
Average velocity ≈ 0.42 meters per second
So, the average velocity of the 150 kg cart on the 75-meter roller coaster track is approximately 0.42 meters per second.
To learn more about velocity, refer below:
https://brainly.com/question/17127206
#SPJ11
The density of mercury is 13. 6 g/cm³
Calculate the mass of :
a) 1 cm³ of mercury
b) 10 cm³ of mercury
1). The mass of 1 cm³ of mercury is 13.6 g.
2). The mass of 10 cm³ of mercury is 136 g.
1) The mass of 1 cm³ of mercury can be calculated using the density formula:
density = mass / volume
Rearranging the formula to solve for mass, we get:
mass = density x volume
Plugging in the values:
density = 13.6 g/cm³
volume = 1 cm³
mass = 13.6 g/cm³ x 1 cm³
mass = 13.6 g
b) Similarly, to find the mass of 10 cm³ of mercury, we can use the same formula:
mass = density x volume
Plugging in the values:
density = 13.6 g/cm³
volume = 10 cm³
mass = 13.6 g/cm³ x 10 cm³
mass = 136 g
To know more about mercury refer here
https://brainly.com/question/28422859#
#SPJ11
How is the ares 4 mav made light enough to get into a high martian orbit?.
The Ares 4 MAV (Mars Ascent Vehicle) has been designed to be as light as possible to make it easier to get into a high Martian orbit.
The main body of the vehicle is constructed out of lightweight materials such as aluminium and titanium. This helps reduce the overall weight of the MAV, making it easier to launch into orbit.
Additionally, the MAV is powered by an advanced propulsion system that is designed to provide maximum efficiency with minimal fuel use. This ensures that the MAV is able to reach its destination with minimal fuel, helping to keep the weight of the craft to a minimum.
Finally, the MAV is equipped with a range of advanced navigation and guidance systems that help to keep the craft on its desired trajectory.
These systems help to ensure the MAV is able to reach its destination with minimal fuel, keeping the craft light and helping it to reach its desired orbit.
Know more about Craft light here
https://brainly.com/question/31200758#
#SPJ11
Doug places a toy car at the top of the first hill and releases it. The car stops at point X. Which change to the model would allow the toy car to travel over all three hills?
A. Add a loop after the tallest hill in order to maximize the kinetic energy of the car.
B. Order the three hills from shortest to tallest so that the potential energy builds up according to the height of each hill.
C. Order the three hills from tallest to shortest to provide the potential energy needed for the car to make it over each hill
Adding a loop after the tallest hill in order to maximize the kinetic energy of the car change to the model would allow the toy car to travel over all three hills. Therefore, the correct answer is option A.
The toy car stopping at point X indicates that it lacks sufficient energy to overcome the potential energy barriers of the subsequent hills. In order to allow the toy car to travel over all three hills, we need to provide it with more kinetic energy.
Therefore, adding a loop after the tallest hill could provide the car with enough kinetic energy to overcome the subsequent hills. Option B, which orders the hills from shortest to tallest, would not provide the car with enough potential energy to overcome the tallest hill, let alone the subsequent hills.
On the other hand, option C, which orders the hills from tallest to shortest, would provide too much potential energy to the car at the beginning, resulting in the car overshooting the first hill and losing energy in the process.
In conclusion, adding a loop after the tallest hill would be the most appropriate change to the model to allow the toy car to travel over all three hills. Therefore, the correct answer is option A.
To know more about kinetic energy refer here:
https://brainly.com/question/7674744#
#SPJ11
Angle axc is 180°. if angle axb is 132º, what is the measure of angle bxc?
The measure of angle BXC is 48°.
To find the measure of angle BXC. Let's elaborate on the process.
In the given scenario, we have angle AXB measuring 132° and angle AXC measuring 180°. To find the measure of angle BXC, we subtract the measure of angle AXB from angle AXC.
angle BXC = angle AXC - angle AXB
Substituting the given measures, we have:
angle BXC = 180° - 132°
Now, performing the subtraction:
angle BXC = 48°
Therefore, the measure of angle BXC is 48°.
This method relies on the fact that the sum of the angles in a triangle is always 180°. Since angle AXC is a straight angle (measuring 180°) and angle AXB is a known angle (measuring 132°), subtracting angle AXB from angle AXC gives us the measure of angle BXC.
By using this subtraction, we determine that angle BXC measures 48°.
It's important to remember that angle measures can be added or subtracted to find unknown angles or relationships between angles. In this case, subtracting the known angle AXB from the known angle AXC allowed us to find the measure of angle BXC.
To learn more about angle, refer below:
https://brainly.com/question/28451077
#SPJ11
A spring is stretched 0. 50 m and the force was 30000 N. What is the spring constant?
The spring constant for this particular spring is 60,000 N/m.
To calculate the spring constant (k) for a spring, you can use Hooke's Law, which states that the force (F) required to stretch or compress a spring by a certain distance (x) is proportional to that distance. The formula for Hooke's Law is:
F = k * x
In your question, the spring is stretched 0.50 m (x) and the force applied is 30,000 N (F). We need to find the spring constant (k). To do this, we can rearrange the formula:
k = F / x
Now, we can plug in the given values:
k = 30,000 N / 0.50 m
k = 60,000 N/m
So, the spring constant for this particular spring is 60,000 N/m. This value represents the stiffness of the spring, meaning that it takes 60,000 Newtons of force to stretch the spring by one meter. A higher spring constant indicates a stiffer spring, whereas a lower spring constant means the spring is more easily stretched or compressed. In this case, the spring is relatively stiff, requiring a substantial amount of force to change its length.
For more about spring constant:
https://brainly.com/question/20388857
#SPJ11
6 points
A van traveling with constant velocity of 15 m-s1 passes a pedestrian crossing zone, where the speed limit is 10. M-5-1. Just as the van passes, a JMPD police
officer on a motorcycle stopped at the crossing starts off in pursuit with constant acceleration of 3. 0 m. 5-2
Save Answer
(a) How much time elapses before the officer catches up with the van? (2 marks)
(b) What is the officer's speed at that point? (2 marks)
(c) What is the total distance each vehicle has traveled at that point? (2 marks)
The total distance traveled by the van is 75 meters and the total distance traveled by the police officer is 37.5 meters at the point of catching up with the van.
What is Velocity?
Velocity is a physical quantity that describes the rate at which an object changes its position with respect to time. It is a vector quantity, which means it has both magnitude and direction. The magnitude of velocity is the speed of the object, while the direction of velocity is the direction in which the object is moving.
The van's speed is greater than the speed limit, so it will maintain a constant speed of 15 m/s. The police officer starts from rest and has a constant acceleration of 3.0 m/[tex]s^{2}[/tex]. Let's denote the time it takes for the police officer to catch up to the van as t. Using the equation of motion for the police officer's velocity, we have:
[tex]v_{police[/tex] = [tex]a_{police * t[/tex]
Using the equation of motion for the van's displacement, we have:
[tex]d_van[/tex]= [tex]v_van * t[/tex]
At the point when the police officer catches up with the van, their displacements will be equal, so we can set these two equations equal to each other and solve for t:
v_[tex]v_{police * t[/tex] = [tex]d_{van[/tex]
[tex]a_{police[/tex] *[tex]t^{2}[/tex] = [tex]v_{van[/tex] * t
3.0 * t^2 = 15 * t
t = 5 seconds
Therefore, it will take the police officer 5 seconds to catch up with the van.
(b) To find the officer's speed at that point, we can use the equation of motion for the police officer's displacement:
[tex]d_{police[/tex] = (1/2) *[tex]a_{police[/tex] *
[tex]d_{police[/tex] = (1/2) * 3.0 * [tex]5^{2}[/tex]
[tex]d_{police[/tex] = 37.5 m
Using the time t = 5 seconds, we can now find the officer's speed at that point using the equation:
[tex]v_{police[/tex]= [tex]a_{police[/tex] * t
[tex]v_{police[/tex] = 3.0 * 5
[tex]v_{police[/tex] = 15 m/s
Therefore, the officer's speed at the point of catching up with the van is 15 m/s.
(c) To find the total distance each vehicle has traveled at that point, we can use the equations of motion for each vehicle:
[tex]d_{van[/tex] = [tex]v_{van[/tex] * t
[tex]d_{police[/tex] = (1/2) * [tex]a_{police[/tex] * [tex]t^{2}[/tex]
Using the time t = 5 seconds, we can substitute the values of [tex]v_{van[/tex] and [tex]a_{police[/tex]:
[tex]d_{van[/tex] = 15 * 5
[tex]d_{van[/tex]= 75 m
[tex]d_{police[/tex]= (1/2) * 3.0 *[tex]5^{2}[/tex]
[tex]d_{police[/tex]= 37.5 m
To know more about Velocity visit;
https://brainly.com/question/80295
#SPJ4
a 1.90-m-long wire having a mass of 0.100 kg is fixed at both ends. the tension in the wire is maintained at 21.0 n.
The fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and tension of 21.0 N is approximately 5.24 Hz.
Given the information provided, we have a 1.90-m-long wire with a mass of 0.100 kg that is fixed at both ends and has a tension of 21.0 N.
To find the linear mass density (µ) of the wire, we can use the following formula:
µ = mass/length
Using the given values, we can calculate µ as follows:
µ = 0.100 kg / 1.90 m = 0.05263 kg/m
Now that we have the linear mass density, we can find the fundamental frequency (f) using the formula:
f = (1 / 2L) × √(T / µ)
Where:
f = fundamental frequency
L = length of the wire
T = tension
µ = linear mass density
Substituting the values we found earlier, we get:
f = (1 / 2 × 1.90 m) × √(21.0 N / 0.05263 kg/m)
f ≈ 0.263 × √(399.2) ≈ 5.24 Hz
So, the fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and a tension of 21.0 N is approximately
5.24 Hz.
Learn more about frequency here:-
https://brainly.com/question/5102661
#SPJ11
Using a lever, a person applies 60 n of force and moves the lever 1 m. this moves a 200-newton rock at the other end by 0. 2 m
The force required to move the 200-newton rock using the lever is 300 N.
We can use the principle of mechanical advantage to determine the force required to move the rock using the lever. Mechanical advantage is the ratio of the output force (the force required to move the rock) to the input force (the force applied by the person). It is given by the formula:
mechanical advantage = output force / input force
In this case, the input force is 60 N and the output force is the force required to move the rock, which we can calculate as follows:
output force = input force x mechanical advantage
The mechanical advantage of a lever is determined by the ratio of the distance from the input force to the fulcrum (the pivot point) to the distance from the output force to the fulcrum. This is known as the lever arm ratio.
In this question, we are told that the person moves the lever 1 m and the rock moves 0.2 m. Therefore, the lever arm ratio is:
lever arm ratio = output distance / input distance
= 0.2 m / 1 m
= 0.2
The mechanical advantage is the inverse of the lever arm ratio:
mechanical advantage = 1 / lever arm ratio
= 1 / 0.2
= 5
Substituting this value in the formula for output force, we get:
output force = input force x mechanical advantage
= 60 N x 5
= 300 N
To know more about lever, here
https://brainly.com/question/3977835
#SPJ4
A 0. 41 kg spike is hammered into a railroad
tie. The initial speed of the spike is equal to
1. 4 m/s. If the tie and spike together absorb 40. 4
percent of the spikeâs initial kinetic energy
as internal energy, calculate the increase in
internal energy of the tie and spike.
Answer in units of J.
please and thank you
A 0.41 kg spike is hammered into a railroad tie with 1.4 m/s initial speed. They absorb 40.4% of its initial kinetic energy as internal energy, resulting in an increase of 0.164 J in their internal energy.
To solve this problem, we need to use the conservation of energy principle, which states that the total energy in a closed system remains constant. In this case, the initial kinetic energy of the spike is converted into internal energy of the spike and tie.
The initial kinetic energy of the spike is given by:
[tex]KEi = (1/2) \times m \times v^2[/tex]
[tex]KEi = (1/2) \times 0.41 kg \times (1.4 m/s)^2[/tex]
KEi = 0.4054 J
The internal energy gained by the spike and tie is given by:
[tex]\Delta E = KEi \times 40.4\%[/tex]
[tex]\Delta E = 0.4054 J \times 0.404[/tex]
ΔE = 0.164 J
Therefore, the increase in internal energy of the spike and tie is 0.164 J.
In summary, a 0.41 kg spike is hammered into a railroad tie with an initial speed of 1.4 m/s. The tie and spike absorb 40.4% of the spike's initial kinetic energy as internal energy. Using the conservation of energy principle, we calculate that the increase in internal energy of the tie and spike is 0.164 J.
To know more about kinetic energy refer here:
https://brainly.com/question/7674744#
#SPJ11