a. The comparative advantage for the Costco Company is in USD. b. The quality spread differential in this swap is 1.46%. c. The interest costs for each company if there is no financial intermediary in this swap transaction is B × 2.48%. d. The interest costs for each company if a financial intermediary charge is 10% of the swap benefit in this swap transaction is 0.00988B.
a. Comparative advantage for Costco company:
In this scenario, the comparative advantage for the Costco company can be determined by finding the lower borrowing rate in USD compared to Euro. The borrowing rate for Costco is lower in USD, i.e. 2.48% compared to 4.15% in Euro. Thus, the comparative advantage for the Costco company is in USD.
b. Quality spread differential in this swap:
Quality spread differential (QSD) refers to the difference in borrowing rates between two countries.
Here, the QSD can be found by subtracting the borrowing rate of Ikea from Costco.
For Euro, QSD = 4.15% - 3.42% = 0.73%For USD, QSD = 2.48% - 1.02% = 1.46%
c. Interest costs for each company without a financial intermediary:
Without any financial intermediary, the interest costs can be calculated as follows:
For Ikea, Interest cost = (Borrowing amount × Borrowing rate) = (B × 3.42%)
For Costco, Interest cost = (Borrowing amount × Borrowing rate) = (B × 2.48%)
where B is the borrowing amount.
For the given swap, 40% of the swap benefit goes to the Costco company, and the rest goes to Ikea.
Thus, the borrowing amount can be found as:
Borrowing amount = Swap benefit / QSD
Swap benefit = (B × QSD) × 40% = (0.4 × B × QSD)
Therefore, Interest cost for Ikea = B × 3.42%
Interest cost for Costco = B × 2.48%
d. Interest costs for each company with a 10% charge on swap benefit:
In this case, a financial intermediary charges 10% of the swap benefit. The swap benefit can be calculated as follows:
Swap benefit = (B × QSD) × (1 – 10%) = (B × QSD) × 0.9
Therefore, the borrowing amount can be calculated as:
Borrowing amount = Swap benefit / QSD = (B × QSD) × 0.9 / QSD = 0.9B
For Ikea, Interest cost = (B × QSD) × 0.6 × 3.42%For Costco, Interest cost = (B × QSD) × 0.4 × 2.48%
Thus, Interest cost for Ikea = 0.020664B
Interest cost for Costco = 0.00988B
Note: The 10% charge reduces the swap benefit by 10% of the original amount, i.e., it becomes 0.9 times the original amount. The swap benefit is then divided into 60% for Ikea and 40% for Costco.
Learn more about comparative advantage here: https://brainly.com/question/13236978
#SPJ11
Newly appointed staff would commence work before the end of the year. You have been tasked
to design an orientation/induction programme for them.Explain how you would have the programme run. State any challenge you are likely to encounter
and recommend solutions.
Introduction: An orientation/induction programme is a training programme that familiarizes newly appointed staff with the company's policies, procedures, and culture. It assists newly hired personnel in becoming more acclimated to their new surroundings and co-workers and assists them in becoming more effective and efficient in their new roles. The newly appointed staff will commence work before the end of the year, and the organization must have an orientation/induction programme for them.
Explanation of the orientation/induction programme:An orientation/induction programme is a crucial aspect of any employee's work life cycle. It is a comprehensive programme that is designed to provide new employees with the information they require to perform their job responsibilities effectively. The orientation/induction programme should be structured and tailored to meet the needs of the organization's newly employed staff, and it should be well-organized and run smoothly. Below are the different phases of an effective orientation/induction programme:Phase 1: Welcome new employees: As part of the welcome process, the HR department should provide new employees with a welcome pack that contains essential information about the company, including its history, mission statement, and policies.Phase 2: Introduction to the company: During this phase, new employees should be given an overview of the organization's structure and how it operates. New hires should also be introduced to their co-workers and given a tour of the office.Phase 3: Job-specific training: During this phase, new employees should be given training on the specific job functions that they will be performing. The training should be provided by experienced employees or the department heads, who should explain what is expected of the new employee.Phase 4: Policies and procedures: During this phase, new employees should be familiarized with the company's policies and procedures, including the company's code of conduct, dress code, attendance policy, etc.Phase 5: Feedback and evaluation: Once the orientation/induction programme is complete, feedback and evaluation should be provided to the new employees, giving them a chance to express any concerns or issues they may have.Challenges that might be encountered:Challenges that might be encountered during the orientation/induction programme include:
Scheduling conflicts due to tight schedules of department heads or experienced employees who will be giving job-specific training.
Language barriers may cause communication issues for non-English-speaking new hires.
Resistance to change from veteran employees who are already accustomed to the company's operations and culture.
Recommendations:To overcome the challenges mentioned above, the following recommendations can be made:
Scheduling conflicts: Encourage department heads to have a flexible schedule to accommodate the orientation/induction programme's needs. Alternatively, provide virtual training for employees who cannot attend the physical training.
Language barriers: Hire translators or provide training materials in the new employee's native language to help with the language barrier.
Resistance to change: Train veteran employees on the importance of the orientation/induction programme and how it benefits the organization and new employees. The veteran employees can also be involved in the training process as mentors or coaches to new employees.
To know more about orientation, visit:
https://brainly.com/question/31034695
#SPJ11
In 20 peduciary fees necessary for the administration
of an estate
In 26 CFR § 20.2053, it implies that fiduciary fees needed for the administration of an estate are generally allowed as deductions for estate tax purposes.
What is the fiduciary feesThroughout the administration of an estate, numerous costs arise, such as compensating the responsible fiduciary or executor for their management and distribution of the estate. Fees for fiduciary services such as asset collection, debt and tax payment, investment management, and estate distribution to beneficiaries are a common occurrence.
In compliance with 26 CFR § 20. 2053, the estate tax assessment may exclude the fiduciary fees from the estate's total worth. The permissible reduction applies when the charges are deemed essential for the appropriate management of the inheritance.
Learn more about fiduciary fees from
https://brainly.com/question/17080270
#SPJ4
See text below
In 26 CFR § 20.2053 fiduciary fees necessary for the administration
of an estate is ---
Harris Fabrics computes its plantwide predetermined overhead rate annually on the basis of direct labor-hours. At the beginning of the year a estimated that 27000 direct labor hours would be required for the period's estimated level of production. The company also estimated $595,000 of foxed manufacturing overhead cost for the coming period and variable manufacturing overhead of $300 per direct labor-hour Harms's actual manufacturing overhead cost for the year was $731344 and its actual total direct labor was 27500 hours Required: Compute the company's plantwede predetermined overhead rate for the year
the Harris Fabric's plantwide predetermined overhead rate for the year is $8.87 per direct labor-hour.
Plantwide predetermined overhead rate is an overall overhead rate utilized to allocate overhead expenses to merchandise or service lines with disparate levels of work. The Harris Fabric computes its plantwide predetermined overhead rate yearly on the basis of direct labor-hours.The computation of the company's plantwede predetermined overhead rate for the year is discussed below:The formula to calculate the predetermined overhead rate is:Predetermined Overhead Rate = Estimated Overhead / Estimated Activity LevelThe predetermined overhead rate can be calculated by dividing the estimated overhead by the estimated activity level. The predetermined overhead rate can be used to apply overhead costs to jobs and inventory.In this problem, we have the following data:Estimated total fixed overhead = $595,000Estimated total variable overhead = $300 per direct labor-hourEstimated total direct labor-hours = 27,000Direct labor-hours worked = 27,500Now, we can use the formula for predetermined overhead rate to compute the rate:Predetermined overhead rate = (Estimated total fixed overhead + Estimated total variable overhead) / Estimated total direct labor-hours= ($595,000 + $300 × 27,000) / 27,000= $8.87 per direct labor-hour
To know more about Fabrics visit;
brainly.com/question/22026300
#SPJ11
Thoms Atlantic's 12 percent annual coupon bonds mature in 10 years and sell for $1,000. The firm is selling, at par, $100 preferred stock, which pays 6.51% of par annual dividend, and flotation costs are 7 percent. Thoms Atlantic's beta is 1.2, the risk-free rate is 10 percent, and the market risk premium is 5 percent. What is Thoms Atlantic's cost of newly issued preferred stock?
The flotation costs are equal to 7%. The cost of newly issued preferred stock is the cost of newly issued preferred stock to the company, which is equal to the dividend yield divided by (1 - flotation costs) since flotation costs are a function of the total proceeds from the sale of preferred stock rather than the issue price itself.
The market risk premium is 5%, and the risk-free rate is 10%. The beta is 1.2. The firm sells $100 preferred stock, which pays 6.51% of par annual dividends, at par.The firm is selling $100 preferred stock at par. The annual dividend paid on the preferred stock is 6.51% of par, which is $6.51. The price of the preferred stock is $100. The flotation costs are 7%, so the total proceeds from the sale of the preferred stock are $93 ($100 x (1 - 7%)).The formula for the cost of newly issued preferred stock is as follows:rps = Dp / (Pp * (1 - F))Where:rps = cost of newly issued preferred stockDp = annual dividend on preferred stockPp = price of preferred stockF = flotation costsrps = $6.51 / ($100 * (1 - 7%)) = 7.04%Therefore, Thoms Atlantic's cost of newly issued preferred stock is 7.04%.
To know more about flotation costs visit:
https://brainly.com/question/13501786
#SPJ11
Which of the Amway company’s inputs are fixed inputs? Why?
Please answer the following questions as completely as possible:
Collective bargaining is an essential component of employment relations, not only in South Africa, but also in many other countries in the world. The right to collective bargaining has been acknowledged internationally by the International Labour Organization (ILO).
Considering the above, please explain the nature and role of collective bargaining in South Africa. In the formulation of your answer, focus on the following:
• The main trends in collective bargaining in South Africa.
• The process of collective bargaining.
Collective bargaining is an important component of employment relations in South Africa as it plays a vital role in promoting labor peace and enhancing productivity.
Collective bargaining is the process by which a group of workers negotiate terms and conditions of employment with their employer. The main trends in collective bargaining in South Africa are as follows:
Collective bargaining is recognized as a fundamental right for workers in South Africa. It is protected by the Labor Relations Act (LRA), which establishes institutions and procedures for collective bargaining.
Collective bargaining is conducted by registered trade unions and employers’ organizations, which represent the interests of workers and employers, respectively.
The LRA requires that both parties engage in collective bargaining in good faith and with a view to reaching an agreement.
The parties are required to make every effort to reach an agreement on the matters being negotiated. If the parties are unable to reach an agreement, they may refer the dispute to the Commission for Conciliation, Mediation and Arbitration (CCMA) for mediation or arbitration.
The CCMA is a statutory body that is responsible for resolving labor disputes in South Africa.
To know more about Collective bargaining, visit:
https://brainly.com/question/28727724#
#SPJ11
Exercise Three: On a certain business class at BMCC, the class average on the latest examination was 94.75, with a standard deviation of 8.25. Given your knowledge of the Normal Probability Distribution, (a) find the probability of observing a test score lower than 87.00, (b) find the probability of observing a test score greater than 94.75, (c) find the probability of observing a test score greater than 80 and less than 100 on the given examination.
In statistics, a normal distribution is a continuous probability distribution that has a bell-shaped probability density function. It is a common way to describe real-valued random variables whose distribution is not known.The mean is a measure of central tendency that is used to determine the average value of a dataset.
It is the arithmetic average of all values in the dataset. The standard deviation is a measure of variability that is used to determine how spread out the values in a dataset are from the mean. It is the square root of the variance, which is the average of the squared differences between each value and the mean.The Normal Distribution is an important probability distribution that is widely used in statistical theory. It is characterized by its mean and standard deviation, and its probability density function is a bell-shaped curve that is symmetrical around the mean. There are several properties of the Normal Distribution that make it useful in statistical analysis.To solve the given problem, we need to find the probabilities of observing test scores below or above certain values using the Normal Probability Distribution. The Normal Probability Distribution can be standardized using the z-score formula:
z = (x - μ) / σ, where x is the value we want to standardize, μ is the mean of the distribution, and σ is the standard deviation of the distribution.
(a) The probability of observing a test score lower than 87.00 can be found by standardizing the value using the z-score formula and looking up the corresponding probability in the Normal Distribution Table:
P(z < (87 - 94.75) / 8.25) = P(z < -0.94) = 0.1711
Therefore, the probability of observing a test score lower than 87.00 is 0.1711.
(b) The probability of observing a test score greater than 94.75 is 0.5, since the Normal Distribution is symmetrical around the mean and 94.75 is the mean
.(c) The probability of observing a test score greater than 80 and less than 100 can be found by standardizing the values using the z-score formula and calculating the area under the curve between the corresponding z-scores:
P((80 - 94.75) / 8.25 < z < (100 - 94.75) / 8.25) = P(-1.80 < z < 0.85) = P(z < 0.85) - P(z < -1.80) = 0.8023 - 0.0359 = 0.7664
Therefore, the probability of observing a test score greater than 80 and less than 100 is 0.7664. In conclusion, the probability of observing a test score lower than 87.00 is 0.1711, the probability of observing a test score greater than 94.75 is 0.5, and the probability of observing a test score greater than 80 and less than 100 is 0.7664.
To know more about probability distribution visit:
https://brainly.com/question/29062095
#SPJ11
List down all the competencies required to become student of
Bachelors in Human Resource Management
The competencies required to become a student of Bachelors in Human Resource Management are as given as follows.
What are they?1. Communication Skills: The ability to communicate in an effective and efficient manner is a key requirement in human resource management. HR managers must be able to convey complex ideas to people in a way that is easy to understand.
2. Leadership Skills: The ability to lead and manage others is essential in the field of HR. HR managers must be able to motivate their employees and create a positive work environment.
3. Analytical Skills: HR managers must have strong analytical skills to evaluate data and make informed decisions. They need to be able to identify trends and patterns in data that can help them solve problems.
4. Interpersonal Skills: HR managers must have strong interpersonal skills to build and maintain relationships with employees, management, and other stakeholders. They should be able to develop strong working relationships with employees and other stakeholders.
5. Organizational Skills: HR managers must have strong organizational skills to manage various tasks such as recruitment, employee training, benefits administration, and performance evaluations. They need to be able to prioritize tasks and manage their time effectively.
6. Problem-Solving Skills: HR managers must have strong problem-solving skills to identify and resolve issues in the workplace. They need to be able to analyze problems and develop creative solutions.
7. Ethics: HR managers should have a strong sense of ethics and the ability to adhere to ethical principles. They should be able to act in an ethical manner and make decisions that are in the best interest of the organization and its employees.
To know more Human Resource Management visit:
https://brainly.com/question/29871347
#SPJ11
Recording bond issuance and discount amortization LO P2 Paulson Company issues 7%, four-year bonds, on January 1 of this year, with a par value of $109,000 and semiannual interest payments Semiannual Period-End Unamortized Discount Carrying Value (0) January 1, issuance $ 6,913 $ 102,087 (1) June 30, first payment 6,049 102,951 (2) December 31, second payment 5,185 103, 815 Use the above straight-line bond amortization table and prepare journal entries for the following. (a) The issuance of bonds on January 1 (b) The first interest payment on June 30. (c) The second interest payment on December 31 View transaction list Journal entry worksheet 1 2 3 > Record the issuance of the bonds on January 1. Note: Enter debits before credits Debit Credit General Journal Date January 01
The journal entries for the three transactions have been prepared as follows:
Given Data: Par value of bonds = $109,000
Semiannual interest payments = 7%Semiannual Period-End Unamortized Discount:
(0) January 1, issuance $6,913 $102,087 (1) June 30, first payment 6,049 102,951 (2) December 31, second payment 5,185 103,815
Now, it is required to prepare journal entries for the following transactions:
(a) The issuance of bonds on January 1
(b) The first interest payment on June 30.
(c) The second interest payment on December 31.
(a) The issuance of bonds on January 1Debit Credit Cash $102,087 Discount on bonds payable $6,913 Bonds payable $109,000 (b)
The first interest payment on June 30Debit Credit Interest expense $3,817 Discount on bonds payable $233 Cash $4,050 ([$109,000 * 7%]/2) - $6,913 = $3,817
[Discount on bond payable is calculated by subtracting the carrying value from the face value] ($6,913/8) = $866(rounded) [Straight-line amortization of discount]
(c) The second interest payment on December 31Debit Credit Interest expense $3,817 Discount on bonds payable $320 Cash $4,497 ([$109,000 * 7%]/2) - $5,185 = $3,817
[Discount on bond payable is calculated by subtracting the carrying value from the face value] $866 (amortization value) - $546 (1st semi-annual period amortization value) = $320
[Discount on bond payable is reduced from the carrying value]
To know more about journal entries visit:
https://brainly.com/question/20421012
#SPJ11
1. Identify, and support with evidence, real problems faced by
Jacques Trumen
Jacques Trumen is a character in the novel "The Murder on the Links" by Agatha Christie.
Some of the real problems faced by Jacques Trumen are as follows:
1. Financial Troubles:Jacques Trumen was going through severe financial troubles and this is one of the primary reasons that he was a murder suspect. He had incurred heavy losses in the stock market and his business ventures had failed miserably.
2. Gambling Addiction:Jacques Trumen had a compulsive gambling habit and it was one of the reasons why he was facing financial difficulties. Evidence to support this can be found in the novel when Hercule Poirot confronts him about it.
3. Infidelity:Jacques Trumen was having an affair with Madame Daubreuil, who was the wife of another suspect, Paul Renauld. This is evidenced in the novel when Hercule Poirot and Arthur Hastings visit her house and find his cigarette case.
4. Suspect in a Murder Investigation:Jacques Trumen became a suspect in the murder investigation of Paul Renauld, a wealthy businessman who was found dead in a shallow grave. This added to his problems and made his life more difficult.
Learn more about Agatha Christie’s novel at:
https://brainly.com/question/22973812
#SPJ11
A customer has invested in mutual funds and chooses to have dividends and capital gains automatically reinvested. All of the following statements are true about this: _______
When a customer chooses to have dividends and capital gains automatically reinvested after investing in mutual funds, the following statements are true:Reinvesting dividends and capital gains allows the customer to make additional investments without paying additional transaction fees.
When dividends and capital gains are reinvested, the customer receives additional shares in the mutual fund instead of cash, which can lead to compounding returns over time.The customer may still owe taxes on the reinvested dividends and capital gains, even though they did not receive the money in cash.Furthermore, the customer's investment will grow more than if he or she had chosen to receive the dividends and capital gains in cash. This is because reinvesting the money results in additional shares, which will generate more dividends and capital gains in the future.Finally, it is worth noting that some mutual funds offer a dividend reinvestment program (DRIP), which automatically reinvests dividends and capital gains for the customer. This can make the process more seamless and convenient for the customer, as they do not need to remember to reinvest the money manually. In conclusion, when a customer chooses to have dividends and capital gains automatically reinvested after investing in mutual funds, they can benefit from additional shares in the mutual fund, compounding returns, and potential tax implications.
To know more about funds visit;
brainly.com/question/20383417
#SPJ11
Accounts receivable represent credit extended by suppliers to a firm when it purchases:_________
Accounts receivable represent credit extended by suppliers to a firm when it purchases goods or services on credit.
When a firm buys goods or services from a supplier and agrees to make payment at a later date, the supplier records the transaction as an account receivable. This means that the supplier has provided the goods or services to the firm but has not yet received payment.
Accounts receivable reflect the amount of money owed by the firm to its suppliers for the purchases made on credit. The firm is expected to pay the amount owed within the agreed-upon terms, typically within a specified number of days or months.
To know more about Account related question visit:
https://brainly.com/question/26435867
#SPJ11
Project A and B are mutually exclusive, based on this which of the following statements is incorrect? O Project A and B can not be chosen together. O The selection of Project A means project B can not be chosen O If Project A and B are both profitable then they can be chosen together. O All of the above are correc
If project A and project B are mutually exclusive, the statement that is incorrect is “If Project A and B are both profitable then they can be chosen together.”Mutually exclusive projects are defined as projects that cannot be conducted simultaneously due to limited resources. The selection of one project leads to the cancellation of the other project. Because of this characteristic, it is not possible to choose project A and B together. Therefore, the first statement that “Project A and B can not be chosen together” is correct.In other words, mutually exclusive projects are projects where selecting one project means canceling the other project. Therefore, the second statement that "The selection of Project A means project B can not be chosen" is correct.The third statement which states that “If Project A and B are both profitable, then they can be chosen together” is incorrect. If two projects are mutually exclusive, selecting one means the other one cannot be chosen, regardless of their profitability. Therefore, all the above statements are not correct except statement three, which is incorrect.If two projects are mutually exclusive, you have to choose one and cancel the other. You cannot choose both projects. So, if project A is chosen, it means project B has been canceled. The projects cannot be done simultaneously as they are mutually exclusive.
The claim that "If Project A and Project B are both profitable then they can be chosen together" is untrue if they are mutually exclusive. You cannot choose projects A and B simultaneously. Therefore, option (A) is accurate.
A project is any endeavor that is deliberately planned to accomplish a certain objective, whether it is carried out alone or in collaboration with others and may involve research or design.
An alternate perspective describes a project as a series of connected activities that must be completed within specific time, budget, and other constraints.
Rather of being a permanent exclusive social structure, a project may be staffed by teams from several organizations to complete certain tasks within a set amount of time.
Learn more about Project, from :
brainly.com/question/30407333
#SPJ4
Which of the following is a difference between "quantitative easing" and ordinary open-market operations? Multiple Choice Open-market operations involve forward commitment; quantitative easing is intentionally vague to maintain flexibility Quantitative easing is done in order to lower interest rates, open-market operations are merely intended to Increase bank reserves Open-market operations are focused exclusively on U.S. government bonds; quantitative easing also includes the buying and selling of debt issued by government agencies and government sponsored entities There is no difference between the two policy tools.
Quantitative easing is done in order to lower interest rates, while open-market operations are merely intended to increase bank reserves.
The difference between "quantitative easing" and ordinary open-market operations is: Quantitative easing (QE) is a monetary policy tool used by central banks to stimulate the economy by purchasing long-term government bonds or other financial assets from the market. The primary objective of QE is to lower interest rates and increase the money supply to encourage lending and investment. On the other hand, ordinary open-market operations involve the buying and selling of short-term government securities (usually U.S. Treasury bills) by central banks to control the money supply and manage short-term interest rates. The primary goal of open-market operations is to adjust bank reserves in the banking system.
The correct difference between "quantitative easing" and ordinary open-market operations is that quantitative easing is done in order to lower interest rates, while open-market operations are merely intended to increase bank reserves.
To know more about Quantitative easing visit:
brainly.com/question/28586399
#SPJ11
According to the principle of insufficient punishment, which of the following parentaltechniques should be most effective in changing a child’s behavior permanently (i.e.,even behavior that occurs in the absence of the parent)?a.ignoring the child’s troublesome behaviorb.threat of severe punishmentc.threat of mild punishmentd.severe punishment
By ignoring negative behavior, the child is no longer rewarded for it, and hence the behavior will no longer be reinforced.
The Principle of Insufficient Punishment, developed by Azrin and Holz, implies that the most effective parental technique to change a child’s behavior permanently is ignoring the child’s troublesome behavior.Parenting styles are important in raising a child. Parenting techniques that make use of discipline and punishment are often used to correct children's negative behaviors. However, there is a difference between discipline and punishment.Discipline is the use of techniques that direct the child's behavior in a positive manner, while punishment is the use of negative or unpleasant results to discipline a child. This is where the Principle of Insufficient Punishment (PIP) comes in. It proposes that insufficient punishment can lead to the likelihood of continued misbehavior from the child. According to the principle, the most effective technique in changing a child’s behavior permanently is ignoring the child's troublesome behavior.In other words, not giving attention to the misbehavior of the child makes the child lose interest and eventually stop the action.Punishment, on the other hand, has been shown to produce short-term change. When a child misbehaves, ignoring the behavior can create a lack of reinforcement that can lead to the behavior no longer being repeated.
To know more about negative behavior visit:
https://brainly.com/question/30228525
#SPJ11
Distinguish between
Safety hazards and Health hazards. Discuss the three standards to
refuse hazardous work.
Safety hazards refer to risks that can cause physical harm or injury, such as slippery floors or exposed wires. Health hazards involve risks to overall well-being, including exposure to chemicals or harmful work conditions. The three standards to refuse hazardous work are imminent danger, reasonable belief, and good faith.
Safety hazards refer to potential risks or dangers that can cause physical harm or injury to individuals in the workplace. These hazards are typically associated with unsafe conditions, equipment, or practices, such as slippery floors, exposed wires, or inadequate protective gear.
Health hazards, on the other hand, involve potential risks to an individual's overall well-being and can result in illnesses or long-term health effects. These hazards often arise from exposure to hazardous substances, such as chemicals, toxins, or biological agents, or from harmful work conditions, such as excessive noise or poor ventilation.
There are three standards to refuse hazardous work:
1. Imminent danger: If an employee believes that performing a specific task poses an immediate threat to their life or health, they have the right to refuse to carry out the work until the hazard is eliminated or adequately controlled.
2. Reasonable belief: If an employee has a reasonable belief that a workplace condition or practice poses a risk of serious harm, even if it may not be an imminent danger, they have the right to refuse the work and request that the hazard be addressed.
3. Good faith: The refusal to perform hazardous work must be done in good faith, meaning the employee genuinely believes that the task or condition is hazardous based on their knowledge, training, and understanding of the situation.
To know more about health hazards, refer to the link:
https://brainly.com/question/31443382#
#SPJ11.
Discuss the four aspects of the Flow Sheet Stage of a design
(i.e. Process Hazard Study 2).
In the context of a Process Hazard Study, the Flow Sheet Stage focuses on analyzing the process flow sheet or diagram of a design.
There are four key aspects to consider during this stage:1. Identification of Major Equipment,2. Material Balance.3. Stream Composition,4. Stream Conditions
1. Identification of Major Equipment: In this aspect, the major equipment items within the process are identified and documented. This includes equipment such as reactors, pumps, heat exchangers, and distillation columns. Understanding the purpose, specifications, and operational conditions of each major equipment item is crucial for evaluating potential hazards.
2. Material Balance: Material balance involves quantifying the input and output streams of the process. It is essential to ensure that the quantities of materials entering and leaving each unit operation are accurately accounted for. This helps identify any discrepancies or potential issues in the flow of materials within the system.
3. Stream Composition: This aspect focuses on the composition of the process streams. It includes identifying the types and concentrations of chemicals or substances present in each stream. Analyzing stream composition is important for assessing the potential for chemical reactions, phase changes, or other interactions that could lead to hazards.
c: The conditions of process streams, such as temperature, pressure, and flow rates, are examined in this aspect. It is crucial to understand the operating conditions of each stream to evaluate potential hazards associated with extreme temperatures, high pressures, or flow imbalances that could cause equipment failures or process upsets.
During the Flow Sheet Stage, these four aspects work together to provide a comprehensive understanding of the process design. This understanding enables the identification and evaluation of potential hazards, allowing for the implementation of appropriate safety measures to mitigate risks and ensure the safe operation of the process. The findings from the Flow Sheet Stage serve as inputs for subsequent stages of the Process Hazard Study, such as the Hazard Identification and Risk Assessment stages.
Learn more about evaluate here:
https://brainly.com/question/20067491
#SPJ11
Please choose a company that interests you. After reviewing the business environment exhibit n share how you think the business you chose is currently affected by the listed environmental variables that surround it. For example, in regards to the competitive environment, Apple has pledged billions of dollars towards making original content in order to enter the enormous streaming market with Netflix, Amazon, Hulu, etc. (Be sure to include your sources)
The company that interests me is Tesla. As a business that produces electric cars, Tesla is directly impacted by several environmental factors.
Some of the environmental variables that surround Tesla include the following:1. Competitive environment- In the competitive environment, Tesla has several competitors, including Rivian, Ford, and General Motors, among others. Tesla's competitive advantage, however, lies in its brand, innovation, and the focus on electric cars.2. Economic environment- Tesla's economic environment is affected by macroeconomic factors such as inflation, recession, exchange rates, and interest rates. The company, however, is trying to adapt by producing cheaper models like Model 3 and expanding to different markets.3. Technological environment- Tesla's success is mainly due to its innovative electric car technology.
The company's innovation in electric vehicles, battery technology, and autonomous driving is vital to their growth. Tesla, therefore, must focus on continuous innovation to maintain its competitive edge.4. Political and legal environment- Tesla's political and legal environment is affected by regulations and policies related to environmental conservation, safety standards, tax incentives, and import/export rules. For example, in some countries, electric vehicles have favorable tax treatment, while in others, they are considered a luxury item.5. Social environment- The social environment affects Tesla through consumer preferences, public attitudes, and media influence.
In this environment, Tesla's success is impacted by changing consumer preferences towards eco-friendliness, green energy, and sustainability. Tesla must, therefore, consider these factors when designing and marketing its products. Source: www.tesla.com, https://www.statista.com/topics/4694/tesla/.
To know more about interests visit:
brainly.com/question/30393144
#SPJ11
In a traditional job costing system, the issuance of indirect
materials to a production department increases: (CPA adapted)
Multiple Choice
A. Stores Control.
B. Work-in-Process Control.
C. Manufactur
In a traditional job costing system, the issuance of indirect materials to a production department increases: B) Work-in-Process Control.
Indirect materials are defined as the materials that are required in the production process but do not form part of the final product.Explanation:Indirect materials include lubricants, oil, cleaning supplies, and other supplies used in the manufacturing process but do not form part of the final product. Direct materials, on the other hand, are the materials that can be traced directly to a specific product, such as wood, screws, and glue.
Indirect materials are allocated to work in progress in a traditional job costing system. Work in progress refers to products that are partially completed but have not yet been completed.Indirect materials are tracked in stores control until they are issued to the production department. When they are issued to the production department, they increase Work-in-Process Control. Work-in-Process Control is a control account that is used to track the cost of goods that are currently being produced. So the answer is B. Work-in-Process Control.
Learn more about Work-in-Process Control: https://brainly.com/question/29318444
#SPJ11
Entity XYZ acquires a machine for CU100,000. The machine has an estimated useful life of 5 years and zero salvage value. For tax purposes, however, the useful life is 4 years. Net income before taxes equals CU110,000 each year. Every year XYZ has tax-free revenues CU10,000. The statutory tax rate is 20%.
Required:
1. Calculate the current tax, the tax expense, and the deferred tax asset or liability for each year.
2. Calculate the effective tax rate and the current tax rate and comment on them.
The effective tax rate is the ratio of total tax expense (CU20,000 for each year) to the net income before taxes (CU110,000 for each year), which is 18.18% [(CU20,000 / CU110,000) x 100%].
Year 1:
Current tax: CU20,000 (CU110,000 x 20%)
Tax expense: CU20,000 (same as current tax since there are no temporary differences)
Deferred tax asset/liability: CU0 (no temporary differences)
Year 2:
Current tax: CU20,000 (CU110,000 x 20%)
Tax expense: CU20,000 (same as current tax)
Deferred tax asset/liability: CU0 (no temporary differences)
Year 3:
Current tax: CU20,000 (CU110,000 x 20%)
Tax expense: CU20,000 (same as current tax)
Deferred tax asset/liability: CU0 (no temporary differences)
Year 4:
Current tax: CU20,000 (CU110,000 x 20%)
Tax expense: CU20,000 (same as current tax)
Deferred tax asset/liability: CU20,000 (temporary difference due to accelerated tax depreciation)
Year 5:
Current tax: CU20,000 (CU110,000 x 20%)
Tax expense: CU20,000 (same as current tax)
Deferred tax asset/liability: CU40,000 (temporary difference due to accelerated tax depreciation)
The current tax is calculated by multiplying the taxable income (net income before taxes) by the statutory tax rate of 20%. In this case, the taxable income is constant at CU110,000 each year, so the current tax remains the same throughout.
The tax expense is equal to the current tax since there are no temporary differences between the accounting and tax bases.
The deferred tax asset or liability arises from temporary differences between the accounting and tax bases. In this case, the temporary difference is due to the difference in the useful life of the machine for accounting purposes (5 years) and tax purposes (4 years). This results in accelerated tax depreciation, creating a temporary difference.
In Year 4, the deferred tax liability is calculated as the tax rate (20%) multiplied by the temporary difference (CU100,000 - CU0) resulting from the accelerated tax depreciation, which is CU20,000.
In Year 5, the deferred tax liability is calculated as the tax rate (20%) multiplied by the temporary difference (CU100,000 - CU20,000) resulting from the accelerated tax depreciation, which is CU40,000.
The effective tax rate is the ratio of total tax expense (CU20,000 for each year) to the net income before taxes (CU110,000 for each year), which is 18.18% [(CU20,000 / CU110,000) x 100%]. The current tax rate is equal to the statutory tax rate of 20%.
The effective tax rate is lower than the statutory tax rate due to the tax-free revenues of CU10,000 each year. The current tax rate and the effective tax rate are relatively close, indicating that there are no significant temporary differences impacting the tax liability.
To know more about tax, visit:
https://brainly.com/question/30157668
#SPJ11
1. Explain the theory of fiscal policy? 2. Describe how aggregate supply affects fiscal Policy? 3. Discuss the evolution of fiscal policy? 4. Discuss the fiscal impact of the federal budget and debt.?
The theory of fiscal policy revolves around the use of government spending and taxation to influence the overall state of the economy. Fiscal policy aims to stabilize the economy, promote growth, and address economic challenges such as inflation, unemployment, and recession. There are two main types of fiscal policy:
a) Expansionary fiscal policy: This involves increasing government spending and/or reducing taxes to stimulate aggregate demand and boost economic activity. It is typically used during economic downturns to combat unemployment and encourage investment and consumption.
b) Contractionary fiscal policy: This refers to decreasing government spending and/or increasing taxes to reduce aggregate demand and control inflation. It is typically employed when the economy is overheating, and inflationary pressures need to be curbed.
Aggregate supply influences fiscal policy through its impact on the overall production capacity of the economy. If aggregate supply is low due to factors like limited resources, technological constraints, or supply-side shocks, fiscal policy may have limitations in stimulating economic growth. In such cases, fiscal policy measures may lead to inflationary pressures rather than increased output.
The evolution of fiscal policy can be traced back to the early theories of John Maynard Keynes in the 20th century. Keynes argued that during economic downturns, government intervention through fiscal policy was necessary to stimulate demand and restore economic equilibrium. This gave rise to the concept of countercyclical fiscal policy, where government spending and taxation are adjusted to offset fluctuations in the business cycle.
Over time, the understanding and implementation of fiscal policy have evolved. Policy frameworks have been refined, and the role of fiscal policy has expanded beyond countercyclical measures to include long-term economic planning, addressing income inequality, and promoting sustainable development.
The federal budget and debt have a significant fiscal impact. The federal budget outlines the government's planned spending and revenue for a specific period. If government spending exceeds revenue, it results in a budget deficit. On the other hand, if revenue exceeds spending, it leads to a budget surplus.
A budget deficit often necessitates borrowing to cover the shortfall, resulting in an increase in the national debt. The level of debt has implications for fiscal policy. High levels of debt can crowd out private investment, increase interest rates, and limit the government's ability to respond effectively to economic downturns.
Managing the fiscal impact of the federal budget and debt requires balancing expenditure priorities, revenue generation, and debt sustainability. It often involves making decisions about government spending, taxation policies, and debt management strategies to ensure fiscal stability, economic growth, and long-term sustainability.
To know more about economic growth click this link-
https://brainly.com/question/29621837
#SPJ11
Critz Company was started on January 1, Year 1. During the month of January, Critz earned $6,600 of revenue and incurred $4,000 of expenses. During the remainder of Year 1, Critz earned $62,000 and incurred $52,000 of expenses. Critz closes its books on December 31 of each year.
Required
Determine the balance in the Retained Earnings account as of January 31, Year 1.
Determine the balance in the Revenue and Expense accounts as of January 31, Year 1.
Determine the balance in the Retained Earnings account as of December 31, Year 1, before closing.
Determine the balances in the Revenue and Expense accounts as of December 31, Year 1, before closing.
Determine the balance in the Retained Earnings account as of January 1, Year 2.
Determine the balance in the Revenue and Expense accounts as of January 1, Year 2.
Balance in January 31, Year 1: $2,600, Balances in January 31, Year 1: Rev. = $6,600, Exp.= $4,000, Balance in December 31, Year 1, before closing: $10,600, Balances in December 31, Year 1, before closing: Rev.= $68,600, Exp.= $56,000, Balance in January 1, Year 2: $10,600, and Balances in January 1, Year 2 will be zero.
To determine the balances in the Retained Earnings, Revenue, and Expense accounts for the given scenarios, we need to consider the income statement and closing entries. Let's calculate each balance step by step:
Balance in Retained Earnings as of January 31, Year 1:
The Retained Earnings balance at the beginning of the year is usually zero for a newly started company. Therefore, the balance as of January 31, Year 1, will be the net income for the month of January. Net income will be calculated as Revenue minus Expenses:
Net Income = Revenue - Expenses
Net Income = $6,600 - $4,000
Net Income = $2,600
So, the balance in the Retained Earnings account as of January 31, Year 1, is $2,600.
Balance in Revenue and Expense accounts as of January 31, Year 1:
Since January is the first month of operations, there are no opening balances in the Revenue and Expense accounts. The balances as of January 31, Year 1, will be the amounts earned and incurred during the month of January:
Revenue = $6,600
Expenses = $4,000
Balance in Retained Earnings as of December 31, Year 1, before closing:
To calculate the balance in the Retained Earnings account before closing, we need to consider the net income for the entire year. The net income is calculated as the sum of revenues and gains minus the sum of expenses and losses. In this case:
Net Income = (Revenue + Gains) - (Expenses + Losses)
Net Income = ($6,600 + $62,000) - ($4,000 + $52,000)
Net Income = $66,600 - $56,000
Net Income = $10,600
So, the balance in the Retained Earnings account as of December 31, Year 1, before closing is $10,600.
Balances in Revenue and Expense accounts as of December 31, Year 1, before closing:
The balances in the Revenue and Expense accounts as of December 31, Year 1, before closing will be the amounts earned and incurred throughout the year. In this case:
Revenue = $6,600 + $62,000 = $68,600
Expenses = $4,000 + $52,000 = $56,000
Balance in Retained Earnings as of January 1, Year 2:
The balance in the Retained Earnings account as of January 1, Year 2, is the same as the balance as of December 31, Year 1, after the closing entries. Therefore, it will be $10,600.
Balance in Revenue and Expense accounts as of January 1, Year 2:
After the closing entries, the Revenue and Expense accounts are reset to zero at the beginning of the new accounting period. So, the balances in these accounts will be zero.
To know more about Retained Earnings here
https://brainly.com/question/14529006
#SPJ4
Whoville Marble Works (WMW) produces Bespoke Marble Kits (BMKs) for discerning marble connoisseurs. To produce their BMKS, WMW uses raw materials, labor and energy, and their production function is given by q = 20r^0.4 l^0.25 m^0.35, where q= WMW's monthly output, measured in BMKS, r = WMW's monthly raw material input, measured in tons, l = WMW's monthly labor input, measured in hours of labor, m = WMW's monthly energy input, measured in megawatt hours. Raw material costs WMW $100/ton, labor costs WMW $30/hour and energy costs WMW $50/megawatt hour. Find the input levels of raw materials, labor and energy that maximize WMW's output, given that their monthly production budget is $30,000. What is the minimum cost?
The minimum cost for WMW to produce their desired output is $84,000 after optimizing their production function.
To find the input levels of raw materials, labor, and energy that maximize WMW's output, we need to optimize their production function subject to the budget constraint.
Let's set up the optimization problem:
Maximize q = 20r^0.4 l^0.25 m^0.35
Subject to the budget constraint: 100r + 30l + 50m ≤ 30,000
To solve this problem, we can use the method of Lagrange multipliers. The Lagrangian function is:
L(r, l, m, λ) = 20r^0.4 l^0.25 m^0.35 + λ(30,000 - 100r - 30l - 50m)
We need to find the critical points by taking partial derivatives and setting them equal to zero:
∂L/∂r = 8r^(-0.6) l^0.25 m^0.35 - 100λ = 0
∂L/∂l = 5r^0.4 l^(-0.75) m^0.35 - 30λ = 0
∂L/∂m = 7r^0.4 l^0.25 m^(-0.65) - 50λ = 0
Solving these equations simultaneously, we get:
8r^(-0.6) l^0.25 m^0.35 = 100λ
5r^0.4 l^(-0.75) m^0.35 = 30λ
7r^0.4 l^0.25 m^(-0.65) = 50λ
Dividing the equations, we have:
(8r^(-0.6) l^0.25 m^0.35) / (5r^0.4 l^(-0.75) m^0.35) = (100λ) / (30λ) = 10/3
Simplifying further, we obtain:
8r^(-0.6 - 0.4) l^(0.25 + 0.75) m^(0.35 - 0.35) = 10/3
8r^(-1) l^1 m^0 = 10/3
8l/r = 10/3
24l = 10r
Substituting this relationship into the budget constraint, we have:
100r + 30l + 50m = 30,000
100r + 30(10r/24) + 50m = 30,000
100r + 5r + 50m = 30,000
105r + 50m = 30,000
21r + 10m = 6,000
Now we have a system of two equations:
21r + 10m = 6,000
24l = 10r
Solving these equations simultaneously, we find:
r = 600
l = 250
m = 300
Therefore, the input levels that maximize WMW's output while staying within their budget are: 600 tons of raw materials, 250 hours of labor, and 300 megawatt hours of energy. The minimum cost can be calculated by substituting these values into the cost function:
Cost = 100(600) + 30(250) + 50(300) = $84,000
Hence, the minimum cost for WMW to produce their desired output is $84,000.
To know more about production function, plesae click on:
https://brainly.com/question/13755609
#SPJ11
Purpose: Assignment 4 - the Individual Reflective Journal - is
designed to ensure each student is able to document a critical
reflection of their personal learning process, as experienced
during this
The Individual Reflective Journal assignment serves the purpose of allowing students to engage in critical reflection on their personal learning journey throughout the course.
It provides an opportunity for students to document their thoughts, insights, and reflections on the knowledge and skills they have gained and the overall learning experience.
Through this reflective journal, students are encouraged to examine their own growth, challenges, and achievements, as well as the strategies they employed to overcome obstacles and enhance their learning. They can explore how the course content, activities, and discussions have impacted their understanding, perspectives, and abilities in relation to the subject matter.
The journal prompts students to delve deeper into their learning process, encouraging them to analyze their strengths and areas for improvement, identify connections between theory and practice, and consider the relevance and applicability of the acquired knowledge in their personal and professional lives.
Ultimately, the Individual Reflective Journal provides a platform for students to actively engage in self-reflection, fostering a deeper understanding of their learning experience and facilitating continuous personal and professional development.
Learn more about journey here
https://brainly.com/question/28942733
#SPJ11
Your client is new to real estate and wants to purchase a home to flip. Your client says I am going to sell the property within 3 to 6 months.
He asks you what type of loan should I get?
1. What is a a 30 year fixed (fully amortized loan) and what is a straight note (interest only)?
2. Should he get a 30 year fixed (fully amortized loan) or Should he get a straight note (interest only). Explain why?
1. A 30-year fixed fully amortized loan is a mortgage loan where the borrower makes regular monthly payments over a period of 30 years. Each payment includes both principal and interest, gradually reducing the outstanding balance until the loan is fully repaid at the end of the 30-year term.
On the other hand, a straight note (interest-only loan) is a type of loan where the borrower only pays the interest portion for a specified period, typically for a few years. The principal amount remains unchanged during this period, and at the end of the term, the borrower must pay the remaining principal balance in full.
It is recommended that your client should consider getting a straight note (interest-only loan) for a short-term flip project, intending to sell the property within 3 to 6 months.
2. The reason for this is that an interest-only loan allows your client to minimize their monthly payments during the holding period since they are only paying the interest portion and not the principal. This can help improve cash flow and provide flexibility for the short-term investment.
In contrast, a 30-year fixed fully amortized loan would require higher monthly payments as it includes both principal and interest. This type of loan is more suitable for long-term homeownership rather than a short-term investment strategy like flipping.
However, it's essential to note that your client should carefully consider their financial situation, risk tolerance, and consult with a mortgage professional to determine the best loan option for their specific circumstances and goals.
Learn more about investment , click here https://brainly.com/question/15105766
#SPJ11
In the North, the Civil War especially elevated the power of:
A. business leaders
B. family farmers
C. ministers
D. teachers
E. industrial workers
(A). Business leaders. The power of business leaders was particularly elevated during the Civil War in the North due to their involvement in supplying the military and meeting the demands of the war effort.
During the Civil War in the North, the power of business leaders was especially elevated. The war created a significant demand for supplies, weapons, and other goods needed for the Union Army. As a result, business leaders and industrialists who were able to meet these demands and contribute to the war effort gained considerable influence and wealth.
Industrialization and the growth of manufacturing industries during this period further strengthened the position of business leaders. They played a crucial role in supplying the military, expanding production capacities, and benefiting from government contracts.
While other groups, such as family farmers and industrial workers, also had their roles and significance during the war, it was the business leaders who experienced a significant increase in power and influence due to their involvement in wartime production and economic activities.
The power of business leaders was particularly elevated during the Civil War in the North due to their involvement in supplying the military and meeting the demands of the war effort.
To know more about business visit:
https://brainly.com/question/18307610
#SPJ11
A manufacturer sells widgets for $260. The cost of a widget is $141 and the manufacturer turns its inventory 13.3 times per year. If the manufacturer's annual holding cost percentage is 24%. Round your answer to two decimal places. What is the holding cost for each widget? dollars
The holding cost for each widget is approximately $2.011. we need to determine the holding cost percentage and apply it to the cost of a widget.
The holding cost percentage is given as 24%.
First, we need to calculate the average inventory period, which is the reciprocal of the inventory turnover ratio. The inventory turnover ratio is the number of times the inventory is sold and replaced in a given period. In this case, the manufacturer turns its inventory 13.3 times per year.
Average inventory period = 1 / Inventory turnover ratio
Average inventory period = 1 / 13.3
Average inventory period ≈ 0.0752 years
Next, we can calculate the holding cost for each widget:
Holding cost per widget = Holding cost percentage * Cost of a widget * Average inventory period
Holding cost per widget = 0.24 * $141 * 0.0752
Holding cost per widget ≈ $2.011
To know more about widget visit:
https://brainly.com/question/32338215
#SPJ11
A company has established a joint venture with another company to build a toll road. The initial investment is paving equipment is 38 million. the equipment will be fully depreciated using the straight-line method over its economic life of five years. Earnings before interest, taxes and depreciation collected from the toll road are projected to be 4 million per annum for 29 years starting from the end of the first year. The corporate tax rate is 30%. The required rate of return for the project under all-equity financing is 13%. The pretax cost of debt for the joint partnership is 7%. To encourage investment in the country's infrastructure, the government will subsidize the project with an 22 million, 10-year loan at an interest rate of 4% per year. All principal will be repaid in one balloon payment at the end of year 10. what is the NPV of the project (keep two decimal places)?
To calculate the net present value (NPV) of the project, we need to determine the cash flows associated with the project and discount them to their present value. Here's how we can calculate the NPV:
1. Initial investment: The initial investment in paving equipment is $38 million. This is considered an outflow and occurs at the beginning of the project.
2. Annual cash flows: The project is expected to generate earnings before interest, taxes, and depreciation (EBITDA) of $4 million per year for 29 years, starting from the end of the first year. We need to calculate the after-tax cash flows for each year by considering the tax rate.
Year 1 to Year 5:
EBITDA = $4 million
Tax = EBITDA * Tax Rate = $4 million * 30% = $1.2 million
Depreciation = Initial Investment / Economic Life = $38 million / 5 = $7.6 million
Taxable Income = EBITDA - Depreciation = $4 million - $7.6 million = -$3.6 million (tax shield)
After-Tax Cash Flow = EBITDA - Tax = $4 million - $1.2 million = $2.8 million
Year 6 to Year 29:
EBITDA = $4 million
Tax = EBITDA * Tax Rate = $4 million * 30% = $1.2 million
After-Tax Cash Flow = EBITDA - Tax = $4 million - $1.2 million = $2.8 million
3. Loan subsidy: The government will provide a loan subsidy of $22 million at an interest rate of 4% per year for 10 years. The principal will be repaid in a balloon payment at the end of Year 10. This loan subsidy is considered an inflow.
4. Discount rate: The required rate of return for the project under all-equity financing is 13%. We will use this rate to discount the cash flows.
Now, we can calculate the NPV of the project by discounting the cash flows to their present value:
NPV = (-Initial Investment) + (Annual Cash Flows / (1 + Discount Rate)^Year) + (Loan Subsidy / (1 + Discount Rate)^10)
NPV = (-$38 million) + ($2.8 million / (1 + 0.13)^1 + $2.8 million / (1 + 0.13)^2 + ... + $2.8 million / (1 + 0.13)^29) + ($22 million / (1 + 0.13)^10)
Calculating this equation will give you the NPV of the project. Please note that the equation involves a summation of cash flows over the 29-year period, which can be time-consuming to calculate manually. It's recommended to use a financial calculator or spreadsheet software to perform the calculations.
To know more about interest visit-
brainly.com/question/28787592
#SPJ11
The PC Richard Company had the following transactions occur during 2021:
(a) Issued 8,000 shares of common stock to the founders for land valued at $275,000. Par value of the common stock is $1 per share.
(b) Issued 4,000 shares of $100 par preferred stock for cash at $120 per share.
(c) Sold 2,500 shares of common stock to the company president for $45 per share.
(d) Purchased 750 shares of outstanding preferred stock issued in (b) for cash at par.
(e) Purchased 2,000 shares of the outstanding common stock issued in (a) for $39 per share.
(f) Reissued 400 shares of repurchased preferred stock at $112.
(g) Reissued 500 shares of reacquired common stock for $45 per share.
(h-1) Repurchased 200 shares of the common stock sold in (g) for $43 per share. (h-2)These same 200 shares were later reissued for $40 per share.
(i) A dividend of $3 per share was declared on outstanding preferred stock.
INSTRUCTIONS:
Prepare the necessary entries for the common stock transactions assuming that the cost method is used for recording treasury stock.
Answer:
(a) Dr. Land $275,000; Cr. Common Stock $8,000; Cr. Paid-in Capital in Excess of Par—Common Stock $267,000
(b) Dr. Cash $480,000; Cr. Preferred Stock $400,000; Cr. Paid-in Capital in Excess of Par—Preferred Stock $80,000
(c) Dr. Cash $112,500; Cr. Common Stock $2,500; Cr. Paid-in Capital in Excess of Par—Common Stock $110,000
(e) Dr. Treasury Stock—Common $78,000; Cr. Cash $78,000
(g) Dr. Cash $22,500; Cr. Treasury Stock—Common $22,500
(h-1) Dr. Treasury Stock—Common $8,600; Cr. Cash $8,600
(h-2) Dr. Cash $8,000; Cr. Treasury Stock—Common $8,000
Explanation:
The journal entries for the common stock transactions assuming that the cost method is used for recording treasury stock:
(a)
Dr. Land $275,000
Cr. Common Stock $8,000
Cr. Paid-in Capital in Excess of Par—Common Stock $267,000
(b)
Dr. Cash $480,000
Cr. Preferred Stock $400,000
Cr. Paid-in Capital in Excess of Par—Preferred Stock $80,000
(c)
Dr. Cash $112,500
Cr. Common Stock $2,500
Cr. Paid-in Capital in Excess of Par—Common Stock $110,000
(e)
Dr. Treasury Stock—Common $78,000
Cr. Cash $78,000
(g)
Dr. Cash $22,500
Cr. Treasury Stock—Common $22,500
(h-1)
Dr. Treasury Stock—Common $8,600
Cr. Cash $8,600
(h-2)
Dr. Cash $8,000
Cr. Treasury Stock—Common $8,000
Learn more about Stock transactions.
https://brainly.com/question/32716713
#SPJ11
Learn more about
https://brainly.com/question/32716713
#SPJ11
Analyse the joint venture model of Slimline and discuss the
benefits of this joint venture to each of the participating
companies.
The joint venture model of Slimline is one of the most successful ventures in the world. The joint venture is an agreement between two or more companies to work together on a project or series of projects.
The benefits of this joint venture are numerous to each of the participating companies. Here are some benefits of this joint venture to each of the participating companies: Slimline is a company that produces and sells high-quality slimming products. The company has been operating in the market for many years and has gained a reputation for producing high-quality products. Slimline's joint venture with another company has helped them increase their production capacity and sales volume. The joint venture has also helped them reduce costs and increase profits.
In conclusion, the joint venture model of Slimline has been very beneficial to both Slimline and the participating company. The joint venture has helped both companies increase their production capacity, reduce costs, and increase their profits. The joint venture has also given them access to new markets and technologies.
To learn more about joint ventures, visit:
https://brainly.com/question/29879369
#SPJ11