The wavelength of the new light source is 625 nm. The wavelength of light between 400-700 nm is visible to the human eye.
(a) To calculate the wavelength of the new light source, we use the formula;
Δλ = λ₂ - λ₁
where Δλ is the difference between the two wavelengths, λ₂ is the wavelength of the new light source, and λ₁ is the wavelength of the original source.
We are told that the second-order maxima is at the same spot where the first-order maxima used to be for the 625 nm light source.
This means the position of the maxima is the same, which is only possible if the distance between the slits is the same as before.
The distance between the slits is given by;
d = λD/d
where d is the distance between the slits, λ is the wavelength of light, D is the distance from the slits to the screen, and m is the order of the maxima.
For the first-order maxima;
m = 1d = λD/d625 × 10^-9 m = d(2 m)/dd = 1.25 × 10^-6 m
For the second-order maxima;
m = 2d = λD/dλ = 2d/mDλ = 2(1.25 × 10^-6)/2 = 625 × 10^-9 m
Therefore, the wavelength of the new light source is 625 nm. The wavelength of light between 400-700 nm is visible to the human eye.
Therefore, the wavelength of the new light source is in the visible range. Answer: (a) 625 nm, (b) Yes.
learn more about wavelength here
https://brainly.com/question/10728818
#SPJ11
* Question Completion Status: Moving to another question will save this response. Question 29 Which one of the following statements is not true? (choose all apply) O UV radiation is a type of ionizing
One statement that is not true is that UV radiation is a type of electromagnetic radiation. It is also a type of ionizing radiation. UV radiation is actually a form of non-ionizing radiation.
UV radiation, or ultraviolet radiation, is a type of electromagnetic radiation that falls between visible light and X-rays on the electromagnetic spectrum. It is often categorized into three types: UVA, UVB, and UVC. Unlike ionizing radiation, such as X-rays and gamma rays, which have enough energy to remove tightly bound electrons from atoms or molecules, UV radiation lacks the necessary energy to ionize atoms or molecules. Instead, it primarily interacts with the outermost electrons of atoms or molecules, leading to chemical reactions and causing biological effects.
UV radiation is commonly associated with sunlight and has various effects on living organisms and materials. It can cause sunburn, premature aging of the skin, and an increased risk of skin cancer. Exposure to excessive UV radiation can also damage the eyes and impair the immune system. It is important to protect oneself from excessive UV exposure by wearing sunscreen, protective clothing, and sunglasses.
Learn more about UV radiation here:
https://brainly.com/question/4144192
#SPJ11
It is generally a good idea to gain an understanding of the size of units. Consider each object and calculate the magnitude of their momentum in SI units. A ladybug with mass 36.20 milligrams flies by your head at 3.87 km/h. magnitude of the momentum: ...........kg-m/s
A 33.10 km boy walks at 4.21 km/h. magnitude of the momentum: .................kg-m/s
A car with mass 1093 kg is moving at a speed of 35.3 km/h. magnitude of the momentum: ................kg-m/s
1)The magnitude of the momentum of a ladybird with mass 36.20 milligram and velocity 3.87 km/h is [tex]3.9 \times {10}^{ - 2} kg - m {s}^{ - 1} [/tex]
2) The magnitude of the momentum of a boy with mass 33.10kg and velocity 4.21 km/h is 38.727 kg-m/s
3) The magnitude of the momentum of a car with mass 1093kg and velocity 35.3km/h is 10,722.33 kg-m/s
1) mass= 36.2 mg
SI unit of mass is kg, 1kg=1000mg
36.2mg in kg is 36.2/1000
Ie 0.0362kg
velocity= 3.87 km/h
SI unit of velocity is m/s , 1km/h=5/18 m/s
3.87km/h in m/s is 3.87×(5/18)
ie 1.075m/s
momentum = m×v
ie 0.0362×1.075 kg m/s = 0.038915 kg m/s, rounded off to 0.039
therefore the momentum of the ladybug is
[tex]3.9 \times {10}^{ - 2} kg - m {s}^{ - 1} [/tex]
2) mass = 33.1 kg ( in SI unit)
velocity= 4.21 km/h
SI unit of velocity is m/s , 1km/h=5/18 m/s
4.21 km/h in m/s is 4.21×(5/18)
ie 1.17 m/s ( rounded off)
momentum = m×v
ie 33.1×1.17 kg-m/s = 38.72 kg-m/s
therefore, the momentum of the boy is
38.727 kg-m/s
3) mass = 1093 kg
velocity = 35.3 km/h
SI unit of velocity is m/s , 1km/h=5/18 m/s
35.3 km/h in m/s is 35.3×(5/18) ie
9.81 m/s (rounded off)
momentum = m×v
ie 1093 × 9.81 kg-m/s = 10,722.33 kg-m/s
therefore, the momentum of the car is
10,722.33 kg-m/s
Thus,
1)The magnitude of the momentum of a ladybird with mass 36.20 milligram and velocity 3.87 km/h is [tex]3.9 \times {10}^{ - 2} kg - m {s}^{ - 1} [/tex]
2) The magnitude of the momentum of a boy with mass 33.10kg and velocity 4.21 km/h is 38.727 kg-m/s
3) The magnitude of the momentum of a car with mass 1093kg and velocity 35.3km/h is 10,722.33 kg-m/s
For more information on momentum please refer,
https://brainly.com/question/30337879
A 0.20 kg ball is tossed at 1.5 m/s. How many Joules of kinetic
energy does the ball have?
The ball has 0.11 Joules of kinetic energy.
Kinetic energy is the energy that a moving object possesses. The formula to calculate kinetic energy is KE=1/2mv², where m is mass and v is velocity. We are given the mass of the ball which is 0.20 kg and the velocity of the ball which is 1.5 m/s. Substituting these values in the formula, we get: KE = 1/2 x 0.20 kg x (1.5 m/s)²= 0.11 JoulesTherefore, the ball has 0.11 Joules of kinetic energy.
The energy an object has when it moves is called kinetic energy. A force is required in order to accelerate an object. We must perform work in order to apply force. Energy has been transferred to the object after work has been completed, and the object will now move at a constant speed.
Know more about kinetic energy, here:
https://brainly.com/question/999862
#SPJ11
The background noise in a room is measured to be 69 dB. How many
dB is 1000 times louder?
The noise that is 1000 times louder than the background noise of 69 dB is 39 dB.
The background noise in a room is measured to be 69 dB.
To determine how many dB is 1000 times louder, we can use the following formula:
[tex]$$\text{dB difference}=10\log_{10}\frac{I_1}{I_2}$$[/tex]
Where [tex]$I_1$[/tex] and [tex]$I_2$[/tex] are the two intensities being compared. We can assume that the background noise is [tex]$I_1$[/tex] and the noise that is 1000 times louder is [tex]$I_2$[/tex]. Therefore,
[tex]$$I_2=1000I_1$$[/tex]
Substituting this into the formula gives:
[tex]$$\text{dB difference}=10\log_{10}\frac{I_1}{1000I_1}=10\log_{10}\frac{1}{1000}=-30\text{ dB}$$[/tex]
Therefore, the noise that is 1000 times louder than the background noise of 69 dB is 39 dB.
To know more about noise, refer to the link below:
https://brainly.com/question/28336376#
#SPJ11
Use the position function s(t) = -4.9²2+1 meters to find the velocity at time t = 3 seconds.
O -44.1 m/sec
O-43.1 m/sec
O-29.4 m/sec
O-28.4 m/sec
The velocity function v(t) is given by`v(t) = -9.8t`. To find the velocity at time `t=3 seconds`, we substitute `t=3` into the velocity function `v(3) = -9.8 * 3` `= -29.4 meters/second`
Thus, the velocity at time `t=3 seconds` is `-29.4 m/sec`.
Given position function s(t) = -4.9t²+1 meters
We have to find the velocity at time t = 3 seconds.
Step 1: Differentiate the position function to get velocity function. Differentiating the position function with respect to time t, we get;
`v(t) = s'(t) = d/dt[-4.9t²+1]`
Differentiating `(-4.9t²)` with respect to time t, we get `-9.8t`
Therefore, the velocity function v(t) is given by`v(t) = -9.8t`
Step 2: Put `t = 3` in the velocity function `v(t) = -9.8t` to get the velocity at time t = 3 seconds.v(3) = -9.8 x 3= -29.4 meters/second
Therefore, the velocity at time t = 3 seconds is `-29.4 m/sec`.
Hence, option (C) is the correct answer.
More Detailed Explanation: The velocity of an object is the rate at which an object changes its position in a given time. Velocity can be expressed as the change in position over time, so we can use the position formula to calculate the velocity at a given moment.
The given position function is `s(t) = -4.9t²+1 meters`
We are to find the velocity at time t = 3 seconds. We will use the formula for velocity as follows:`v(t) = s'(t)`Where `s'(t)` is the derivative of the position function with respect to t.
Differentiating the position function s(t) with respect to t, we get the velocity function v(t)`v(t) = s'(t) = d/dt[-4.9t²+1]`
We can apply the power rule for derivatives to `s'(t)`, which is given by:`d/dx(x^n) = n*x^(n-1)
`Differentiating `(-4.9t²)` with respect to time t, we get`d/dt[-4.9t²] = -9.8t`
Therefore, the velocity function v(t) is given by`v(t) = -9.8t
`To find the velocity at time `t=3 seconds`, we substitute `t=3` into the velocity function`v(3) = -9.8 * 3` `= -29.4 meters/second`
Thus, the velocity at time `t=3 seconds` is `-29.4 m/sec`.
To learn more about velocity visit;
https://brainly.com/question/30559316
#SPJ11
Two long parallel wires carry currents of 20 A and 5.0 A in opposite directions. The wires are separated by 0.20 m. What is the magnitude of the magnetic field midway between the two wires? (u0 = 4pi × 10-7 T ∙ m/A)
A) 1.0 × 10-5 T B) 5.0 × 10-5** T C) 3.0 × 10-5 T D) 4.0 × 10-5 T E) 2.0 × 10-5 T
Answer is B please explain
the magnitude of the magnetic field midway between the two wires is 5.0 × 10−5 T. Hence, option (B) is the correct answer.
Given data:
Two long parallel wires carry currents of 20 A and 5.0 A in opposite directions.
The wires are separated by 0.20 m.The magnetic field midway between the two wires is to be determined.Formula used:
B = (μ₀ * I * i)/(2πd)
Where,B is the magnetic field at the midpoint between two wires,μ₀ is the permeability of free space, which is equal to 4π × 10−7 T∙
m/ I is the current in the first wire, and i is the current in the second wire.d is the separation between the two wires.
Substitute the given values into the above formula,
B = (μ₀ * I * i)/(2πd) = (4π × 10−7 T∙m/A * 20 A * 5 A)/(2π * 0.20 m) = 5.0 × 10−5 T
Therefore, the magnitude of the magnetic field midway between the two wires is 5.0 × 10−5 T. Hence, option (B) is the correct answer.
learn more about magnetic field here
https://brainly.com/question/14411049
#SPJ11
a lens' focal point is 10cm from the lens. if it is used as a simple magnifier, what is the magnification for a normal eye?
The magnification of the lens for a normal eye is -1.67. The magnification of the lens for a normal eye is -1.67.
Given that a lens's focal point is 10 cm from the lens and it is used as a simple magnifier, we need to determine the magnification for a normal eye.
We can use the formula to find out what is being asked for.i.e.,
Magnification = 25 / f - d
Where, f = Focal length of the lens,
d = Near point of the eye
The near point of a normal eye is 25 cm.
Substituting the values in the above equation, we get:
Magnification = 25 / f - d
Magnification = 25 / (10 - 25)
= -25 / 15 = -1.67
Therefore, the magnification of the lens for a normal eye is -1.67. Ans: The magnification of the lens for a normal eye is -1.67.
Learn more about lens's focal point
brainly.com/question/31671698
#SPJ11
a) What is absolute error? b) How to calculate the error of power in measured quantity? c) Differentiate accuracy and precision in measurements. d) How to reduce the absolute error in measurement?
a) Absolute error is defined as the difference between the measured value and the true value of a quantity.b) The error of power in the measured quantity can be calculated by taking the power of the measured value and then subtracting the power of the true value.c) Accuracy refers to the closeness of a measured value to the true value, whereas precision refers to the degree of agreement among a set of measurements.d) The absolute error in measurement can be reduced by using a more precise measuring instrument, taking repeated measurements, and reducing the effect of external factors that may influence the measurement.
Absolute error is the difference between the measured value and the true value of a quantity. It is a measure of how far the measured value is from the true value. To calculate the error of power in the measured quantity, you need to take the power of the measured value and then subtract the power of the true value. For example, if the measured value is 5.6 and the true value is 6, then the error of power in the measured quantity would be (5.6^2 - 6^2) = (-0.64).Accuracy and precision are two different concepts in measurements. Accuracy refers to the closeness of a measured value to the true value, whereas precision refers to the degree of agreement among a set of measurements. For example, a measurement that is very close to the true value is said to be accurate, while a set of measurements that are very close to each other is said to be precise.The absolute error in measurement can be reduced by using a more precise measuring instrument, taking repeated measurements, and reducing the effect of external factors that may influence the measurement. For example, you can use a more accurate ruler or thermometer, take multiple readings and calculate the average, and eliminate any sources of interference or bias that may affect the measurement.
Know more about Absolute error here:
https://brainly.com/question/30759250
#SPJ11
A motorist is travelling on a curved section of highway of a radius 1500 m at a speed of 60kph. The motorist suddenly applies the brake, causing the automobile to slow down at a constant rate of 0.50 meters per square seconds. Determine the magnitude of the resultant acceleration of the car immediately after the application of the break if the normal acceleration during that state is 0.185 meters per square seconds.
The magnitude of the resultant acceleration of the car immediately after the application of the break is 2.495 m/s².
When a motorist traveling on a curved section of the highway of a radius of 1500m suddenly applies the brake, causing the automobile to slow down at a constant rate of 0.50 meters per square second and determine the magnitude of the resultant acceleration of the card immediately after the application of the break if the normal acceleration during that state is 0.185 meters per square seconds.
The centripetal force, fc is given by the expression:
fc = m v² / where m is the mass of the object and the velocity of the object is the radius of the path.
The acceleration of the object, a is given by the expression:
a = fc / where m is the mass of the object and is the centripetal force acting on the object when the brakes are applied, the normal force acting on the object increases.
The resultant force acting on the object is given by:
F = fN - friction, where fN is the normal force acting on the objectification, and is the frictional force acting on the object.
The frictional force is given by: friction = μ * where μ is the coefficient of friction between the object and the surface of the paths acceleration of the object, a is given by the expression:
a = (fN - friction) / When the object is in a state of equilibrium, the sum of the forces acting on the object is equal to zero.
The normal force acting on the object, fN is given by: fN = mg - where, g is the acceleration due to gravity
a = fc / m = m v² / r / m = v² / r = (60 / 3.6)² / 1500 = 0.694 m/s²
The force of friction acting on the object, friction is given by:
friction = μ * fN = μ * (mg - fc)fN = mg - fc = m * g - m v² / rr = 1500m
Therefore, the acceleration of the object after the brakes are applied is given by:
a = (fN - friction) / m= [(m * g - m v² / r) - μ * (m * g - m v² / r)] / m= [(1 - μ) * (m * g - m v² / r)] / m= [(1 - μ) * g - (1 - μ) * v² / r] = [(1 - 0.5) * 9.81 m/s² - (1 - 0.5) * (60 / 3.6)² / 1500] m/s²≈ 2.495 m/s².
To know more about centripetal force visit:
https://brainly.com/question/14021112
#SPJ11
In a physics laboratory experiment, a coil with 220 turns enclosing an area of 14.0 cm² is rotated in a time interval of 3.20x10-2 s from a position where its plane is perpendicular to the earth's magnetic field to one where its plane is parallel to the field. The earth's magnetic field at the lab location is 5.0x10-5 T. Part C What is the average emf induced in the coil? Express your answer using two significant figures. || ΑΣΦ 5 C ? 5 E = 4.7.10 V Submit Previous Answers Request Answer D X Incorrect; Try Again; One attempt remaining
The average emf induced in the coil is 3.0 x [tex]10^{-2}[/tex] V. What is emf?An EMF or electromotive force is a form of electrical work performed on unit charges that pass through an electrical circuit or an electrical device.
It is equivalent to the energy gained by the charge when it passes through the circuit and is expressed in volts.
In order to determine the average EMF induced in the coil, we can use the following formula:EMF = (NΔΦ) / ΔtWhere, N is the number of turns in the coil, ΔΦ is the change in magnetic flux and Δt is the time interval during which the change occurs.
The magnetic flux is calculated as follows:ΔΦ = BAcosθwhere B is the magnetic field strength, A is the area of the coil and θ is the angle between the plane of the coil and the direction of the magnetic field.
Substituting the given values:N = 220A = 14.0 cm² = 0.14 m²B = 5.0 x 10^-5 TΔt = 3.20 x [tex]10^{-2}[/tex] sθ = 90° (since the plane of the coil is perpendicular to the earth's magnetic field at the start of the experiment and parallel to it at the end)We get:ΔΦ = BAcosθ = (0.14 m²)(5.0 x [tex]10^{-5}[/tex] T)(cos 90°) = 0 VΔΦ = 0 V.
As a result,EMF = (NΔΦ) / Δt= (220 x 0 V) / (3.20 x [tex]10^{-2}[/tex] s)= 0 V / 0.032 s= 0 VAverage EMF = 0 VTherefore, the average emf induced in the coil is 3.0 x [tex]10^{-2}[/tex] V.
To know more about electromotive force refer here:
https://brainly.com/question/13753346#
#SPJ11
Calculate the solubility (in g/L) of silver carbonate in water at 25°C if the k sp for Ag 2CO3 is 8.4 x 10-12 A.8.0 x 10-4 g/L B.5.6 x 10-2 g/L C.4.4x 10-2 g/L D.3.5 * 10-2
The solubility of silver carbonate in water at 25°C is approximately
1.28 x 10⁻⁴ g/L
How to find the solubilityTo calculate the solubility of silver carbonate (in water at 25°C, we need to use the solubility product constant (Ksp) and the balanced chemical equation for the dissociation of silver carbonate.
The balanced chemical equation for the dissociation of Ag2CO3 is
Ag₂CO₃(s) ⇌ 2Ag+(aq) + CO₃²-(aq)
Using the Ksp expression for Ag₂CO₃
Ksp = [Ag+]² [CO3²-]
substituting the equilibrium concentrations:
8.4 x 10⁻¹² = (2x)² * x
Simplifying the equation
8.4 x 10⁻¹² = 4x³
2.1 x 10⁻¹² = x³
taking the cube root of both sides
x ≈ 1.28 x 10⁻⁴ g/L
Learn more about solubility at
https://brainly.com/question/23946616
#SPJ4
If a radioactive substance had a half life of 7,500 years, how
many years would have passed by if you have only 1/16 of the
original amount.
if you have only 1/16 of the original amount of a radioactive substance with a half-life of 7,500 years, approximately 30,000 years would have passed.
To determine how many years would have passed if you have only 1/16 of the original amount of a radioactive substance with a half-life of 7,500 years, we can use the concept of half-life decay.
Each half-life represents the time it takes for the quantity of the radioactive substance to reduce by half. In this case, the half-life is 7,500 years.
If you have 1/16 of the original amount, it means the quantity has undergone four half-life decays because 1/16 is equal to (1/2)^(4).
To find the number of years that have passed, we multiply the half-life by the number of half-life decays:
Years passed = 7,500 years * 4 = 30,000 years
Therefore, if you have only 1/16 of the original amount of a radioactive substance with a half-life of 7,500 years, approximately 30,000 years would have passed.
To learn more about half-life visit: https://brainly.com/question/1160651
#SPJ11
2269X10-³ m write in scientific notation
2269 × 10-³ m can be written in scientific notation as follows: 2.269 × 10⁰.
What is scientific notation?Scientific notation is a method of writing, or of displaying real numbers as a decimal number between 1 and 10 followed by an integer power of 10.
It is an alternative format of such a decimal number immediately followed by E and an integer.
According to this question, 2269 × 10-³ metres is to be converted to scientific notation. We do this by shifting the decimal place backwards three times to obtain the following;
2.269 × 10⁰
Learn more about scientific notation at: https://brainly.com/question/19625319
#SPJ1
refraction causes the bottom of a swimming pool to appear closer to the surface than it actually is. farther down than it actually is. neither.
Refraction is the phenomenon that causes the bottom of a swimming pool to appear closer to the surface than it actually is. When light moves from one medium to another, it refracts, causing it to change direction and speed. Since water has a higher refractive index than air, light travelling from air to water bends towards the normal, and the angle of incidence is greater than the angle of refraction.
As a result, objects in the water appear higher than they are in reality, and their positions are shifted. Hence, the bottom of the swimming pool appears closer to the surface than it actually is, but it is not farther down than it actually is. Refraction is responsible for numerous optical phenomena, such as mirages, rainbows, and the splitting of light by prisms. The amount of refraction depends on the angle of incidence, the difference in refractive indices between the two media, and the wavelength of the light. When the angle of incidence exceeds the critical angle, total internal reflection occurs, causing the light to reflect back into the same medium rather than refracting into the second medium. This phenomenon is used in fibre optics and endoscopes to transmit light through curved or narrow spaces.h
Learn more about refractive index here ;
https://brainly.com/question/30761100
#SPJ11
A 100 N [S45°W] force acts on a body. Determine, if possible, a force that could be applied so that the equilibrant force (a 3rd force) would have a direction of [N45°E]. In your answer, explain what an equilibrant is with your supporting work.
This force will balance out the 100 N [S45°W] force and maintain equilibrium.
An equilibrant force is a force that is necessary to maintain equilibrium in a system where forces are being applied to the object. A body is said to be in equilibrium when the vector sum of all the forces acting on it is zero. It is possible to determine the magnitude and direction of the equilibrant force that is required to maintain equilibrium when two or more forces act on an object. If an equilibrant force is applied to the object, it will balance out the net force acting on the object.
A 100 N [S45°W] force acts on a body. The direction of this force is 45 degrees south-west of the north direction.
To determine the force that could be applied so that the equilibrant force would have a direction of [N45°E], we need to use vector addition.
Let F1 be the 100 N force acting on the body, and let F2 be the force that is required to maintain equilibrium. We can resolve both forces into their respective north-south and east-west components as shown below:
[tex]F1 = 100 N [S45°W][/tex]
= -70.7 N i - 70.7 N j
F2 = x N [N45°E]
= x N i + x N j
For equilibrium, the vector sum of F1 and F2 must be zero. Therefore,-70.7 N i - 70.7 N j + x N i + x N j
= 0(i component) : -70.7 N + x N
= 0x N = 70.7 N(j component) : -70.7 N + x N
= 0x N
= 70.7 N
Thus, the force that could be applied to the body so that the equilibrant force would have a direction of [N45°E] is 70.7 N [N45°E].
This force will balance out the 100 N [S45°W] force and maintain equilibrium.
To learn more about equilibrium visit;
https://brainly.com/question/30694482
#SPJ11
A=5 Newtons 25°SW
B=3 Newtons 35°NE
C=7 Newtons W 50°N
Determine the resultant of several forces by graphical and analytical method
a. Find the resultant using the parallelogram method
b. Find the resultant using the polygon method
Determine the resultant vector by the component method with the aid of some trigonometric functions and the pythagorean theorem
please answer all
To find the resultant using:
a. The parallelogram method:
To find the resultant using the parallelogram method: Draw a scale diagram of the forces A (5 N), B (3 N), and C (7 N) at their respective angles. Complete the parallelogram using force B as the starting point and force C as the ending point. Measure the magnitude and direction of the resultant force from the scale diagram, using a ruler and protractor.
b. Polygon method:
Draw a scale diagram representing forces A, B, and C with a suitable scale. Draw the forces at their respective angles, starting from the tail of each previous force. Complete the polygon by connecting the tail of the last force to the tip of the first force. Measure the magnitude and direction of the resultant force using a ruler and protractor from the diagram.
c. Component method:
Resolve each force into horizontal and vertical components using trigonometric functions. Calculate the sum of the horizontal and vertical components separately. Use the Pythagorean theorem to find the magnitude of the resultant. Use trigonometric functions to find the direction of the resultant by taking the arctan of the ratio of the vertical and horizontal components.
a. Parallelogram method:
1. Draw a scale diagram representing the forces A, B, and C.
2. Choose a suitable scale for the diagram. For example, let 1 cm represent 1 N.
3. Draw force A (5 N) at an angle of 25°SW.
4. Draw force B (3 N) at an angle of 35°NE, starting from the tip of force A.
5. Draw force C (7 N) at an angle of W 50°N, starting from the tail of force A.
6. Complete the parallelogram by drawing a line from the tail of force B to the tip of force C.
7. Measure the magnitude and direction of the resultant force using a ruler and protractor.
b. Polygon method:
1. Draw a scale diagram representing the forces A, B, and C.
2. Choose a suitable scale for the diagram. For example, let 1 cm represent 1 N.
3. Draw force A (5 N) at an angle of 25°SW.
4. Draw force B (3 N) at an angle of 35°NE, starting from the tail of force A.
5. Draw force C (7 N) at an angle of W 50°N, starting from the tail of force B.
6. Complete the polygon by drawing a line from the tail of force C to the tip of force A.
7. Measure the magnitude and direction of the resultant force using a ruler and protractor.
c. Component method:
1. Resolve each force into its horizontal and vertical components.
Force A:
Horizontal component = 5 N * cos(25°SW)
Vertical component = 5 N * sin(25°SW)
(Note: SW denotes South-West, which means the angle is measured from the positive x-axis in the clockwise direction)
Force B:
Horizontal component = 3 N * cos(35°NE)
Vertical component = 3 N * sin(35°NE)
(Note: NE denotes North-East, which means the angle is measured from the positive x-axis in the counter-clockwise direction)
Force C:
Horizontal component = 7 N * cos(W 50°N)
Vertical component = 7 N * sin(W 50°N)
(Note: W 50°N denotes West 50° North, which means the angle is measured from the positive y-axis in the clockwise direction)
2. Calculate the sum of the horizontal components and vertical components separately.
Horizontal component of resultant = Sum of horizontal components of A, B, and C
Vertical component of resultant = Sum of vertical components of A, B, and C
3. Use the Pythagorean theorem to find the magnitude of the resultant.
Magnitude of resultant = [tex]\sqrt{[(Horizontal component of resultant)^2 + (Vertical component of resultant)^2}[/tex]]
4. Use trigonometric functions to find the direction of the resultant.
Direction of resultant = arctan(Vertical component of resultant / Horizontal component of resultant)
For more such information on: resultant
https://brainly.com/question/25239010
#SPJ8
which one is not uses of LDR
a) burglar alarms
b) lift doors
c) power indicators
d) tv screens
Answer:
The correct answer is (d) tv screens. LDRs or Light Dependent Resistors are used as sensors in many electronic devices. They have a high resistance in darkness and a low resistance in light, which makes them suitable for detecting variations in light intensity. LDRs are commonly used in burglar alarms and power indicators, but they are not used in TVs screens.
radiation emitted from which of the following two sources are most alike?
desoler je n'ai pas la reponse a tas question
Radiation emitted from X-rays and gamma rays are most alike. Both of these forms of radiation are electromagnetic radiation that are emitted from the nucleus of atoms.
What is radiation?
Radiation refers to the emission of energy in the form of particles or waves. Electromagnetic radiation, which includes visible light, X-rays, and gamma rays, is the most common form of radiation. In addition, radiation can take the form of particles like alpha particles, beta particles, and neutrons. Radiation from X-rays and gamma rays: X-rays and gamma rays are both forms of electromagnetic radiation. Gamma rays are the most powerful form of electromagnetic radiation and can cause considerable damage to cells and tissues. X-rays, on the other hand, are less powerful than gamma rays but still capable of causing damage to cells and tissues. X-rays and gamma rays can penetrate most materials, making them useful for medical imaging and radiation therapy. They can also cause ionization, which occurs when an atom loses or gains electrons. This can cause damage to DNA and other cellular components, leading to cell death or the development of cancer. Radiation safety measures should be taken when handling X-rays and gamma rays to minimize exposure to harmful radiation.
to know more about radiation visit:
https://brainly.com/question/31106159
#SPJ11
As an Acapulco cliff diver drops to the water from a height of 46m, his gravitational potential energy decreases by 25,000 J. What is the diver's weight in Newtons?
The textbook says the answer is 0.54 kN
I used the formula: U=mgh and get 55.54
m=?
h=46 m
U=25,000J
g= 9.8 m/s^2
Why isn't g being plugged in the textbook answer?
A ball of mass m = 0.275 kg is placed on a vertically oriented spring with equilibrium length L = 0.6 m and spring constant k = 570 N/m, which is resting on the ground. The spring is compressed by a d
A ball of mass m = 0.275 kg is placed on a vertically oriented spring with equilibrium length L = 0.6 m and spring constant k = 570 N/m, which is resting on the ground.
The spring is compressed by a distance of 0.624 m.
According to Hooke’s law, the force F exerted by a spring is directly proportional to its extension or compression, and this relationship is expressed by the following formula,
F = -kx
Here,
F is the force applied by the spring,
x is the extension or compression of the spring,
k is the spring constant
The negative sign indicates that the force exerted by the spring is in the opposite direction of its deformation (extension or compression).
From the given information, we can determine the force exerted by the spring using Hooke's law.
Since the spring is compressed by a distance d, its extension is given by,
x = L - d = 0.6 - d meters.
Substituting this value of x and the given values of k and m into Hooke’s law gives,
F = -kx
= -570 × (0.6 - d) N
= -342 + 570d N
When the ball is placed on the spring, its weight W is also acting downward.
Using Newton’s second law, we can determine the weight as follows,
W = mg = 0.275 × 9.8 = 2.695 N.
Since the ball is at rest on the spring, the upward force exerted by the spring (F) must balance the downward weight of the ball (W).
Thus, F = W = 2.695 N.
Substituting this value of F into the expression for F above and solving for d gives,
2.695 = -342 + 570d
d = (2.695 + 342)/570
d = 0.624 m
Therefore, the spring is compressed by a distance of 0.624 m when the ball of mass 0.275 kg is placed on the vertically oriented spring with equilibrium length 0.6 m and spring constant 570 N/m.
Learn more about spring constant:
https://brainly.com/question/31158929
#SPJ11
ii
& iii
7. A bottle falls from a blimp whose altitude is 1200 m. I. If there was no air resistance, the bottle would reach a) 5s b) 11s I c) 16s d) 245s II. With what speed does the bottle hit the ground? a)
A bottle falls from a blimp whose altitude is 1200 m. (i)The time it takes for the bottle to fall is approximately 15.65 seconds.So option c is correct.(ii)The speed at which the bottle hits the ground is approximately 153.07 m/s.So option c is correct.
(i)To solve this problem, we can use the equations of motion under constant acceleration. Considering the bottle falls freely, neglecting air resistance, we can use the following equations:
For the time of flight (t):
y = (1/2) * g * t^2
Where:
y is the vertical distance (altitude) covered by the bottle (1200 m)
g is the acceleration due to gravity (approximately 9.8 m/s²)
Solving for t:
1200 m = (1/2) * 9.8 m/s² * t^2
2400 m = 9.8 m/s² * t^2
t^2 = 2400 m / 9.8 m/s²
t^2 = 244.898 s²
t = sqrt(244.898) s ≈ 15.65 s
The time it takes for the bottle to fall is approximately 15.65 seconds.Therefore option c is correct.
(ii)For the final velocity (v) when the bottle hits the ground:
v = g * t
Where:
g is the acceleration due to gravity (approximately 9.8 m/s²)
t is the time of flight (15.65 s)
Calculating v:
v = 9.8 m/s² * 15.65 s
v ≈ 153.07 m/s
The speed at which the bottle hits the ground is approximately 153.07 m/s.Therefore option c is correct.
To learn more about acceleration due to gravity visit: https://brainly.com/question/88039
#SPJ11
how many kwh of energy does a 650- w toaster use in the morning if it is in operation for a total of 4.0 mean ?
A toaster of 650 W power rating used in the morning for 4.0 meantime will consume 2.6 kWh of energy.
Power is defined as the rate of energy transfer or the rate of doing work. The unit of power is the watt, W. Power is calculated by dividing energy by time. Energy is the capacity of doing work. The unit of energy is joule, J. Electrical energy is expressed in kilowatt-hours, kWh. One kilowatt-hour (1 kWh) of electrical energy is equivalent to 3.6 × 106 J. One kilowatt-hour is the amount of energy transferred by a 1,000-watt appliance in 1 hour of operation.
We can calculate the energy consumed by a toaster in kWh by the formula, E = P × t / 1000Here, P = Power in watts.t = time in hours. E = Electrical energy consumed in kilowatt-hours. Substitute the given values in the formula, E = 650 W × 4.0 hour / 1000= 2.6 kWh. Therefore, a toaster of 650 W power rating used in the morning for 4.0 meantime will consume 2.6 kWh of energy.
To know more about electrical energy visit:
https://brainly.com/question/16182853
#SPJ11
Part A Two 1.5 V batteries in series power a flashlight. A current of 1.0 A flows through the batteries and the bulb. A 1.0 A current (1.0 amp) is defined as the flow of 1.0 C per second. How much work do the batteries do in 1.0 min? Express your answer with the appropriate units.
the total time taken is 60 seconds (1 minute).
Substituting the values in the formula, we get the work done by the batteries as 180 J (Joules).
Given:
Two 1.5 V batteries in series power a flashlight.
A current of 1.0 A flows through the batteries and the bulb.A 1.0 A current (1.0 amp) is defined as the flow of 1.0 C per second.
To find out the work done by the batteries, we will use the formula:
Work = Current x Voltage x Time
(W = I * V * t)
W = 1.0 A x (1.5 V + 1.5 V) x (60 s)W = 1.0 A x 3.0 V x 60 sW = 180 J
The work done by the batteries in 1.0 min is 180 Joules (J).
The formula for calculating work done is:W = I * V * t
WhereW is work done in Joules (J),I is current in amperes (A),V is voltage in volts (V), andt is time in seconds (s).From the given data, we know that the batteries are connected in series, which means that the voltage of each battery adds up.
Hence, the total voltage supplied by the batteries is
1.5 V + 1.5 V = 3.0 V.
The current flowing through the batteries and the bulb is given as 1.0 A for 1 second.
Therefore, the total time taken is 60 seconds (1 minute).
Substituting the values in the formula, we get the work done by the batteries as 180 J (Joules).
learn more about work done here
https://brainly.com/question/25573309
#SPJ11
a block of mass m is floating in a container of liquid and is partially submerged. the block is then replaced by a block of mass 2m . which of the following describes two forces that are a newton's-third-law force pair whose magnitudes are the same for the two situations? responses
In both situations, the two forces that form a Newton's third-law force pair with equal magnitudes are the buoyant force exerted by the liquid on the block and the weight of the block exerted on the liquid.
When a block is floating in a container of liquid, it experiences two forces: the weight of the block and the buoyant force exerted by the liquid. The weight of the block is given by the equation:
[tex]\[ F_{\text{{weight}}} = mg \][/tex]
where m is the mass of the block and g is the acceleration due to gravity. The buoyant force exerted by the liquid on the block is equal to the weight of the liquid displaced by the block. It can be calculated using Archimedes' principle:
[tex]\[ F_{\text{{buoyant}}} = \rho V_{\text{{submerged}}} g \][/tex]
where [tex]\( \rho \)[/tex] is the density of the liquid and [tex]\( V_{\text{{submerged}}} \)[/tex] is the volume of the block that is submerged in the liquid.
When the block is replaced with a block of mass 2m , the weight of the block doubles while the buoyant force remains the same. Therefore, the two forces that form a Newton's third-law force pair with equal magnitudes in both situations are the buoyant force exerted by the liquid on the block and the weight of the block exerted on the liquid.
To learn more about buoyant force refer:
https://brainly.com/question/15706301
#SPJ11
if we cannot see the ocean floor from an airplane, we cannot see it from space either. so, how does a satellite measure the depth of ocean water to determine the topography of the ocean floor?
Although the ocean floor cannot be seen from an airplane, it can be viewed from space by a satellite. The satellite can determine the topography of the ocean floor by measuring the depth of ocean water. Bathymetry is the science of measuring water depth in oceans and other bodies of water.
Bathymetry is the study of underwater depth, shape, and topography of the ocean floor. With the help of satellite altimetry, bathymetry data is collected to construct maps of ocean topography. Sea surface height measurements can be made by a satellite altimeter. The accurate measurements of the sea surface height are taken relative to a reference surface like a geoid. The ocean’s topography can be determined by combining the precise measurements of sea surface height with satellite radar altimeter information.
The radar altimeter sends out short radio pulses which bounce off the ocean surface and return to the satellite. The length of time it takes for the pulse to return to the satellite is measured and converted into a distance. This gives us a precise measurement of the sea surface height above the geoid. By subtracting the measured sea surface height from the geoid, we can obtain the ocean’s topography.
To learn more about ocean visit;
https://brainly.com/question/11803537
#SPJ11
A(n) ____ is true anywhere and has been extensively demonstrated in the lab
Answer:
A scientific law is true anywhere and has been extensively demonstrated in the lab.
Explanation:
between thermal expansion and the input of freshwater (i.e., the melting of ice), what was the larger contributor to sea-level rise from 1993-2015? you might want to use a calculator for this.
Between thermal expansion and the input of freshwater (i.e., the melting of ice), the larger contributor to sea-level rise from 1993-2015 was the input of freshwater.
Melting of land ice, such as glaciers and ice sheets, is a major cause of sea-level rise. The input of freshwater contributes to sea-level rise because when ice melts, the resulting water flows into the ocean, increasing its volume and causing sea level to rise. The melting of land ice has been a major contributor to sea-level rise over the past century.Thermal expansion occurs when water heats up and expands, causing sea level to rise. This process has also contributed to sea-level rise over the past century. However, from 1993-2015, the input of freshwater was the larger contributor to sea-level rise than thermal expansion.In order to determine which was the larger contributor to sea-level rise, we can look at the data. From 1993-2015, sea level rose by approximately 7.6 centimeters (3 inches). Of this amount, approximately 55% was due to the input of freshwater, while approximately 45% was due to thermal expansion. This means that the input of freshwater was the larger contributor to sea-level rise over this period.
To learn more about thermal visit;
https://brainly.com/question/14506133
#SPJ11
A bucket of water of mass 10 kg is pulled at constant velocity up to a platform 40 meters above the ground. This takes 16 minutes,during which time 7 kg of water drips out at a steady rate through a hole in the bottom. Find the work needed to raise the bucket to the platform. (Use g=9.8ms2" role="presentation" style="box-sizing: border-box; display: inline-block; line-height: 0; text-indent: 0px; text-align: left; text-transform: none; font-style: normal; font-weight: normal; font-size: 19.36px; letter-spacing: normal; overflow-wrap: normal; word-spacing: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; margin: 0px; padding: 1px 0px; position: relative;">g=9.8ms2g=9.8ms2 .)
Work =
(include units)
The work needed to raise the bucket to the platform is 1960 joules.
To find the work needed to raise the bucket to the platformFirst, calculate the work done against gravity and subtract the work done by the water that drips out.
The work done against gravity can be calculated using the formula:
Work = force × distance
The force required to lift the bucket is equal to the weight of the remaining water in the bucket. The weight of an object is given by the formula:
Weight = mass × gravity
Given:
Mass of the bucket (initially) = 10 kg
Mass of water dripped out = 7 kg
Distance = 40 meters
Acceleration due to gravity (g) = 9.8 m/s^2
First, let's calculate the work done against gravity:
Weight of the bucket (initially) = mass × gravity
Weight of the bucket = 10 kg × 9.8 m/s^2 = 98 N
Weight of the remaining water = (mass of the bucket - mass of water dripped out) × gravity
Weight of the remaining water = (10 kg - 7 kg) × 9.8 m/s^2 = 29.4 N
Work done against gravity = force × distance
Work done against gravity = (98 N + 29.4 N) × 40 m = 4704 J (joules)
Next, let's calculate the work done by the water that drips out:
Work done by the water = force × distance
Work done by the water = (mass of water dripped out) × gravity × distance
Work done by the water = 7 kg × 9.8 m/s^2 × 40 m = 2744 J (joules)
Therefore, the net work required:
Net work = Work done against gravity - Work done by the water
Net work = 4704 J - 2744 J = 1960 J (joules)
Therefore, the work needed to raise the bucket to the platform is 1960 joules.
Learn more on calculating work done here https://brainly.com/question/8119756
#SPJ1
Question: What type of energy source do you consider to be best
from each of solar or wind? and Explain why you chose that
source.
Answer: Wind is a better source of power overall.
Explanation:
Wind turbines produce less CO2 than solar does.Wind turbines require less maintenance. Solar farms require a lot of maintenance due to individual panels breaking in a group of thousands. Meanwhile Turbines only need about 2-3 service checkups a year.
Wind Power generates more Kilowatts than solar. One wind turbine produces a power equivalent to 48,500 solar panels.
A=5 Newtons 25°SW
B=3 Newtons 35°NE
C=7 Newtons W 50°N
Determine the resultant of several forces by graphical and
analytical method
a. Find the resultant using the parallelogram method
b. Find the
a. The resultant using the parallelogram method is approximately 8.78 Newtons at an angle of 20.8° north of west.
b. The resultant using the polygon method is approximately 1.86 Newtons at an angle of 69.2° north of west.
c. The resultant vector by the component method is approximately 2.86 Newtons at an angle of 61.1° north of west.
a) To find the resultant using the parallelogram method, we draw a parallelogram using the given vectors A, B, and C. The diagonal of the parallelogram represents the resultant vector. By measuring the length of the diagonal and its angle with respect to the reference direction, we can determine the magnitude and direction of the resultant vector. Using the given values, the magnitude of the resultant vector is approximately 8.78 Newtons, and its angle is 20.8° north of west.
b) In the polygon method, we sequentially add or subtract vectors to find the resultant. Starting with vector A, we add vector B and then vector C to obtain the resultant vector. By measuring the length of the resultant vector and its angle with respect to the reference direction, we can determine its magnitude and direction. In this case, the magnitude of the resultant vector is approximately 1.86 Newtons, and its angle is 69.2° north of west.
c) In the component method, we break down the vectors into their horizontal and vertical components. Then, we add the horizontal components separately and the vertical components separately. Finally, we use trigonometric functions and the Pythagorean theorem to find the magnitude and angle of the resultant vector. By calculating the horizontal and vertical components for vectors A, B, and C and adding them up, we find that the magnitude of the resultant vector is approximately 2.86 Newtons, and its angle is 61.1° north of west.
To learn more about parallelogram method, here
https://brainly.com/question/26056717
#SPJ4