the earth travels around the sun in an almost circular orbit at an almost constant speed of 107,300 km/h (or 67,062 mi/h)! which statement(s) are true about the earth's motion about the sun?multiple select question.the earth is going too fast to accelerate any more.the earth is not accelerating since we earthlings do not feel the acceleration.the earth is not accelerating since its speed is constant.the earth has a velocity that is always changing.the earth cannot accelerate since it is in space.the earth is accelerating since the direction of its velocity is changing.

Tasting water to identify which cup contains salty water or fresh water may not be reliable, as taste can be subjective and some individuals may have a weaker sense of taste.

Another approach is to use a conductivity meter or a multimeter with conductivity measurement capabilities to test the water in each cup. Salty water has a higher conductivity than fresh water due to the presence of ions, so the cup with higher conductivity would contain the salty water.

A third approach is to use a refractometer to measure the refractive index of the water. Salty water has a higher refractive index than fresh water due to the presence of dissolved salts, so the cup with a higher refractive index would contain the salty water.

In summary, to determine which cup contains salty water and which contains fresh water, one can use taste, a conductivity meter, a multimeter with conductivity measurement capabilities, or a refractometer.

Each of these methods has its own advantages and disadvantages, and the choice of method depends on factors such as the resources available and the specific characteristics of the water being tested.

To know more about salty water refer here:

https://brainly.com/question/29362135?#

#SPJ11

The index of refraction of the unknown material is 1.5.

The index of refraction (n) of a medium is defined as the ratio of the speed of light in a vacuum (c) to the speed of light in the medium (v):

n = c / v

In this case, the speed of light in the unknown material is given as 2.00 × [tex]10^8[/tex] m/s. The speed of light in a vacuum is approximately 3.00 × [tex]10^8[/tex] m/s. Substituting these values into the formula:

n = (3.00 × [tex]10^8[/tex] m/s) / (2.00 × [tex]10^8[/tex] m/s)

Simplifying the expression:

n = 1.5

To know more about refraction refer here

https://brainly.com/question/14760207#

#SPJ11

If an object is speeding up, the sign of its velocity and acceleration are the same. Option B is correct.

This means that both velocity and acceleration are positive if the object is moving in the positive direction and negative if the object is moving in the negative direction. Acceleration is defined as the rate of change of velocity over time, so if an object is speeding up, its velocity is increasing over time. This increase in velocity can be positive or negative, depending on the direction of motion, but in either case, the acceleration must be in the same direction as the velocity.

Distance and speed are not inversely proportional in this case, as they can both increase or decrease together when an object is speeding up. The magnitude of velocity and acceleration are not always zero, as they can be positive or negative depending on the direction of motion. Option B is correct.

To know more about the Acceleration, here

https://brainly.com/question/30499732

#SPJ4

Charged particles are fundamental to the behavior of electric currents, electric circuits, and resistance. An electric current is the flow of charged particles, typically electrons, through a conductor.

The flow of charged particles generates an electric field that induces a potential difference, or voltage, across the conductor.Electric circuits are constructed by connecting conductors and electrical components, such as resistors, capacitors, and inductors, in a specific configuration. The arrangement of the components determines how the current flows through the circuit.

The flow of current through the circuit depends on the resistance offered by the components in the circuit and the potential difference across the circuit.Resistance is the property of a conductor that opposes the flow of current. The resistance of a conductor is proportional to the number of charged particles in the conductor, the length of the conductor, and the cross-sectional area of the conductor. The resistance can also be affected by the temperature of the conductor and its material properties.

In summary, charged particles are responsible for generating electric currents that flow through electrical circuits. The behavior of the currents is determined by the arrangement of the components in the circuit and the resistance offered by the conductors and components. Resistance is a fundamental property of a conductor that opposes the flow of charged particles and can be affected by various factors.

For more such questions on resistance visit:

https://brainly.com/question/7669692

#SPJ11

This standing wave corresponds to the third harmonic. The fundamental frequency of a guitar string is determined by the length of the string, which in this case is 61 cm.

When a standing wave is produced on the string, the nodes (points where the wave has zero displacement) and antinodes (points of maximum displacement) can be counted to determine the harmonic number. In this case, the number of antinodes is 3, which corresponds to the third harmonic.

The fundamental frequency of the string is determined by the equation f = 1/2L√T/m, where L is the length of the string, T is the tension, and m is the mass per unit length of the string. The third harmonic frequency is three times the fundamental frequency, which is calculated by multiplying the fundamental frequency by 3. Therefore, the third harmonic frequency of the guitar string is three times the fundamental frequency.

In addition, the wavelength of the third harmonic is one-third of the wavelength of the fundamental frequency. This is because the wavelength of a wave is inversely proportional to its frequency. The wavelength of the third harmonic is one-third of the wavelength of the fundamental frequency, and the distance between the antinodes is one-third of the wavelength. Therefore, the standing wave with three antinodes corresponds to the third harmonic.

Know more about displacement here

https://brainly.com/question/11934397#

#SPJ11

Answer:

According to the only context given, the correct answer is induction.

The third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.

We can start the problem by using conservation of momentum. The momentum before the impact is zero since the plate is at rest, and the momentum after the impact is the sum of the momenta of the three pieces.

Since there are no horizontal forces during the crash, the total momentum is conserved in the x and y directions separately.

Let's call the velocity of the third piece v and assume it moves at an angle θ relative to the x-axis. Then we can write the following equations:

Initial momentum in x-direction = Final momentum in x-direction

0 = 0.32 kg * 2.00 m/s + 0.355 kg * 0 m/s + 0.1 kg * v cos(θ)

Initial momentum in y-direction = Final momentum in y-direction

0 = 0.32 kg * 0 m/s + 0.355 kg * 1.50 m/s + 0.1 kg * v sin(θ)

Simplifying these equations, we get:

0.64 = 0.1 v cos(θ)

0.535 = 0.1 v sin(θ)

We can divide the second equation by the first equation to get:

tan(θ) = 0.535/0.64 = 0.836

Taking the inverse tangent of both sides, we get:

θ = 39.8°

Therefore, the third piece moves at an angle of 39.8° relative to the x-axis, which is in the northeast direction.

To know more about momentum refer here

https://brainly.com/question/29220242#

#SPJ11

As for the Voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.

When the switch is in position 1, the circuit is closed and the battery is connected in series with the inductor and resistor. This means that current flows through the circuit, causing a magnetic field to be generated by the inductor. However, when the switch is suddenly moved to position 2, the circuit is opened and the battery is no longer connected.

After the switch is moved, the current in the circuit begins to decrease due to the inductor's opposition to changes in current. The time it takes for the current to decrease to 36.8% of its original value is known as the time constant, which is calculated by dividing the inductance of the inductor by the resistance of the resistor.

After four time constants, the voltage across the resistor can be calculated using the equation V = V0 * e^(-t/RC), where V0 is the initial voltage, t is the time elapsed, R is the resistance, and C is the capacitance. Plugging in the values given, we get V = 193 * e^(-4/RC) = 3.53 volts.

As for the voltage across the inductor, it is equal to zero after four time constants because the current in the circuit has decreased to zero. Therefore, the correct answer for part (b) is zero, not 0.107.

To Learn More About Voltage

https://brainly.com/question/1176850

SPJ11

The speakers in a sports stadium are 89. 5 m from a fan's seat. It takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

The time it takes for sound to travel from the speakers to the fan's seat can be calculated using the formula

Time = distance / speed

Where distance is the distance between the speakers and the fan's seat, and speed is the speed of sound in air.

In this case, the distance between the speakers and the fan's seat is 89.5 m, and the speed of sound in air is 343 m/s (at standard temperature and pressure).

Plugging in these values into the formula, we get

Time = 89.5 m / 343 m/s

Time = 0.261 seconds

Therefore, it takes approximately 0.261 seconds for sound to travel from the speakers to the fan's seat in the sports stadium.

To know more about time here

https://brainly.com/question/22594054

#SPJ4

The object is known as a projectile, and its course is known as its trajectory.

A projectile is an object that moves freely under the effects of gravity and air resistance after being pushed by an external force. Although projectiles are any items in motion across space, they are most typically found in warfare and sports.

The curving route that an object takes when thrown is known as projectile motion.

Learn more about projectiles here:

https://brainly.com/question/24216590

#SPJ1

The momentum of an object is directly proportional to its mass and velocity. Therefore, the momentum of the larger truck can be calculated as follows:

Momentum of larger truck = (2 x mass of smaller truck) x (1/2 x velocity of smaller truck)

Momentum of larger truck = (2 x m) x (0.5 x 20)

Momentum of larger truck = m x 20

This shows that the momentum of the larger truck is equal to the momentum of the smaller truck, as the increased mass is balanced by the decreased velocity.

In other words, the momentum of an object depends on both its mass and velocity, and changes in one factor can be compensated by changes in the other factor to maintain the same momentum.

To know more about Momentum, refer here:

https://brainly.com/question/30677308#

#SPJ11

Hubble concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

In 1929, Edwin Hubble published his first paper on the relationship between redshift and distance. He tentatively concluded that there is a linear redshift-distance relationship; that is, if one galaxy is twice as far away as another, its redshift is twice as large.

This relationship is known as the Hubble relation. If you graph this relation, the slope of the line is the Hubble constant or a measure of the expansion rate of the universe.

More on Hubble's relation can be found here: https://brainly.com/question/29752713

#SPJ1

The period of the electromagnetic wave is 5×10⁻¹⁰ seconds

Period is the time taken for a wave to complete one rotation.

To calculate the period of the wave, we use the formula below.

Formula:

Where:

From the question,

Given:

substitute these values equation 1

Learn  more about period here: https://brainly.com/question/29813582

#SPJ1

Explanation:

To find the average speed of the train, we can use the formula:

average speed = total distance / total time

To find the total distance, we need to calculate the distance traveled during each segment of the trip:

- Distance traveled at 60 km/h for 0.52 hours = 60 km/h * 0.52 h = 31.2 km

- Distance traveled at 30 km/h for 0.24 hours = 30 km/h * 0.24 h = 7.2 km

- Distance traveled at 70 km/h for 0.71 hours = 70 km/h * 0.71 h = 49.7 km

Total distance = 31.2 km + 7.2 km + 49.7 km = 88.1 km

To find the total time, we simply add up the times for each segment:

Total time = 0.52 h + 0.24 h + 0.71 h = 1.47 hours

Now we can use the formula to find the average speed:

average speed = total distance / total time = 88.1 km / 1.47 h ≈ 59.86 km/h

Therefore, the average speed of the train is approximately 59.86 km/h.

The frequency of the wave produced by oscillating one end of the rope up and down 2.0 times a second is also 2.0 Hz (Hertz).

Frequency is defined as the number of oscillations or cycles that a wave completes in one second. In this case, each oscillation of the rope creates one complete cycle of the wave.

Therefore, if the rope is oscillating 2.0 times per second, it is completing 2.0 cycles of the wave each second, which is equivalent to a frequency of 2.0 Hz.

To know more about oscillations, refer here:

https://brainly.com/question/31472633#

#SPJ11

Answer:We can use the kinematic equations of motion to solve this problem. The equation we need to use is:

v^2 = u^2 + 2as

where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (which is -9.81 m/s^2), and s is the displacement.

Initially, the ball is thrown straight down with an initial speed of 4.30 m/s and a height of 8.80 m. Let's take the upward direction as positive. Using the equation of motion for displacement, we can find the time it takes for the ball to reach a height of 5.80 m:

s = ut + (1/2)at^2

-3 = 4.3t + (1/2)(-9.81)t^2

-4.905t^2 + 4.3t - 3 = 0

Using the quadratic formula, we find that the time it takes for the ball to reach a height of 5.80 m is t = 0.956 s (rounded to three significant figures).

Now, we can use the equation of motion for velocity to find the velocity of the ball at this point:

v^2 = u^2 + 2as

v^2 = (4.3 m/s)^2 + 2(-9.81 m/s^2)(-3 m)

v = -5.08 m/s

The negative sign indicates that the velocity is in the downward direction. Therefore, the velocity of the ball when it reaches a height of 5.80 m is 5.08 m/s downward.

Explanation:

If the 50-kg crate starts from rest and achieves a velocity of v = 4 m/s when it travels a distance of 5 m to the right. The magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.

To determine the magnitude of force P acting on the crate, we need to use the equations of motion and the concept of friction. The force acting on the crate can be expressed as the sum of the force due to P and the force due to friction.

First, we can calculate the force due to friction, which is given by the formula Ff = μk x Fn, where Fn is the normal force acting on the crate. Fn can be calculated by multiplying the mass of the crate by the acceleration due to gravity (9.8 m/s²):

Fn = m x g

Fn = 50 kg x 9.8 m/s²

Fn = 490 N.

Therefore, Ff = 0.3 x 490 N = 147 N.

Next, we can use the equations of motion to calculate the force due to P. We can use the formula[tex]v^2 = u^2 + 2as[/tex], where u = 0 m/s (since the crate starts from rest), v = 4 m/s, and s = 5 m.

Solving for a, we get [tex]a = 4^2 / (2 \times 5) = 1.6\; m/s^2.[/tex] The force due to P can be calculated using the formula F = ma, where m is the mass of the crate:[tex]F = 50 \;kg \times 1.6\; m/s^2 = 80 N.[/tex]

Finally, we can add the force due to friction and the force due to P to get the total force: Ftotal = Ff + F = 147 N + 80 N = 227 N.

Therefore, the magnitude of force P acting on the crate is 80 N, and the total force acting on the crate is 227 N.

In summary, to determine the magnitude of force P acting on a crate, we can use the equations of motion and the concept of friction. By calculating the force due to friction and the force due to P, we can add them to get the total force acting on the crate.

To know more about magnitude refer here:

https://brainly.com/question/30827927#

#SPJ11

The cyclist's power output must be equal to 784 N x speed. To climb the same hill at the same speed, the cyclist's power output must be equal to the gravitational force acting on the system (bicycle plus rider) multiplied by the speed at which they are moving.

The gravitational force can be calculated using the formula F = mg, where m is the total mass of the system (80 kg) and g is the acceleration due to gravity (9.8 [tex]m/s^{2}[/tex]). Therefore, the gravitational force acting on the system is 784 N (80 kg x 9.8 [tex]m/s^{2}[/tex]).

Assuming that the speed at which they are moving is constant, the power output required by the cyclist can be calculated using the formula P = F x v, where P is power, F is force, and v is velocity (speed). Therefore, the cyclist's power output must be equal to 784 N x speed.

For example, if the speed is 5 m/s, then the power output required by the cyclist would be 3920 watts (784 N x 5 m/s). However, it's important to note that this is a theoretical calculation and in reality, the power output required may be different due to factors such as air resistance, friction, and the gradient of the hill.

To know more about gravitational force, refer here:

https://brainly.com/question/12528243#

#SPJ11

Vibration of an object about an equilibrium point is called simple harmonic motion when the restoring force is proportional to the displacement from the equilibrium point and is directed towards the equilibrium point.

This is known as Hooke's Law, which states that the force exerted by a spring is directly proportional to the displacement of the spring from its equilibrium position.

Mathematically, this can be expressed as F = -kx, where F is the restoring force, x is the displacement from the equilibrium point, and k is the spring constant, a measure of the stiffness of the spring.

To know more about Hooke's Law refer here

https://brainly.com/question/29126957#

#SPJ11

The linear frequency that should be selected for the power supply for the circuit to operate at resonance is 2077.9 Hz.

To find the linear frequency that should be selected for the power supply for the circuit to operate at resonance, we can use the formula for resonant frequency of an RLC circuit:

f = 1 / (2π√(L*C))

where f is the resonant frequency, L is the inductance in henries, and C is the capacitance in farads.

In this case, the capacitance is given as 77.7 μF, which is equivalent to 0.0777 F, and the inductance is given as 28.6 mH, which is equivalent to 0.0286 H. The resistance is given as 630.5 Ω.

Substituting these values into the formula, we get:

f = 1 / (2π√(0.0286 H * 0.0777 F)) = 2077.9 Hz

At this frequency, the inductive reactance and the capacitive reactance cancel out, and the impedance of the circuit is purely resistive, resulting in maximum current flow and minimum power loss.

To learn more about frequency click on,

https://brainly.com/question/16991418

#SPJ4

The speed of the 8 kg ball must be 0.83 m/s to the right.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of a system of objects is conserved if no external forces act on the system. Before the explosion, the total momentum of the system is zero since both balls are at rest.

After the explosion, the total momentum of the system is still zero, so the momentum of the 5 kg ball to the left must be balanced by the momentum of the 8 kg ball to the right. We can use the formula for momentum, which is momentum = mass x velocity. Let v be the velocity of the 8 kg ball after the explosion.

Then we have

5 kg x (-1.3 m/s) + 8 kg x v = 0

Solving for v, we get:

v = (5 kg x 1.3 m/s) / 8 kg = 0.8125 m/s

Since the velocity is to the right, we get:

v = 0.83 m/s to the right.

To know more about the Speed, here

https://brainly.com/question/31241752

#SPJ4

A copper wire was measured to be 50.0m long with an uncertainty of 1cm and had a thickness of 1.00mm measured with a micrometer screw gauge. The volume of copper used was [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].

The volume of copper used can be calculated by multiplying the length, cross-sectional area, and density of copper. The length is given as 50.0 m with an uncertainty of [tex]\pm 0.01[/tex]m, and the thickness of the wire is given as 1.00 mm, which is equivalent to 0.001 m.

The cross-sectional area of the wire can be calculated using the formula for the area of a circle, which is πr², where r is the radius of the wire.

The radius of the wire can be calculated by dividing its thickness by 2, giving a value of 0.0005 m. Therefore, the cross-sectional area is [tex]\pi (0.0005)^2 = 7.85 \times 10^{-7} m^2[/tex]. The density of copper is 8.96 g/cm³, which is equivalent to [tex]8.96 \times 10^3 \;kg/m^3[/tex].

Using the formula V = L x A, where V is the volume of copper, L is the length of the wire, and A is the cross-sectional area, we get:

[tex]V = (50.0 \pm 0.01 m) \times (7.85 \times 10^{-7} m^2)[/tex]

[tex]V = 3.93 \times 10^{-5} m^3 \pm 7.85 \times 10^{-9} m^3[/tex]

To account for the uncertainties in the measurements, we used significant figures and error propagation rules. The uncertainty in the volume was calculated using the formula for the multiplication of quantities with uncertainties.

In summary, the volume of copper used was found to be [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].

To know more about volume refer here:

https://brainly.com/question/30347304#

#SPJ11

The ultraviolet catastrophe is good evidence for the (B).wave nature of quanta is correct option.

The ultraviolet catastrophe was a problem in classical physics that arose when attempting to explain the spectral distribution of blackbody radiation. According to classical physics, the energy of radiation should increase without limit as the frequency of the radiation increases. However, experiments showed that this was not the case, and there was a maximum frequency beyond which the energy decreased.

This problem was resolved by Max Planck in 1900, who proposed that energy is quantized and can only exist in discrete packets or "quanta". This led to the development of quantum mechanics, which describes the behavior of matter and energy at the atomic and subatomic level.

The wave-particle duality is a fundamental concept in quantum mechanics that describes the dual nature of particles, which can exhibit both wave-like and particle-like behavior depending on the experimental setup. However, the ultraviolet catastrophe is specifically related to the wave nature of quanta, as it was the wave-like behavior of energy that led to the resolution of the problem.

To know more about wave nature

https://brainly.com/question/27077956

#SPJ4

Chico, California, is a diverse ecosystem that includes both physical and biological components. Various factors can disrupt these components and impact the overall ecosystem.

1. Physical Component Disruptions:

a. Climate Change: Climate change can alter temperature and precipitation patterns, leading to changes in the availability of water resources, extended drought periods, increased frequency of extreme weather events, and shifts in seasonal patterns. These changes can disrupt the physical environment, affecting habitats, water availability, and overall ecosystem dynamics.

b. Land Use Changes: Human activities such as urbanization, deforestation, and agriculture can lead to habitat loss, fragmentation, and degradation. These changes in land use can disrupt natural habitats, limit food sources, and alter the physical structure of the ecosystem.

c. Pollution: Pollution from various sources, including industrial activities, agriculture, and urban runoff, can introduce harmful substances into the ecosystem. This pollution can impact water quality, soil health, and air quality, affecting both physical components and the organisms that rely on them.

2. Biological Component Disruptions:

a. Invasive Species: The introduction of non-native species can disrupt the balance of the ecosystem. Invasive species can outcompete native species for resources, prey upon native species, alter habitats, and disrupt ecological interactions. This can lead to a decline in native biodiversity and changes in ecosystem functioning.

b. Habitat Loss and Fragmentation: Destruction and fragmentation of habitats due to human activities can lead to the loss of crucial habitats for various species. This loss can result in reduced biodiversity, decreased populations of native species, and disruptions in ecological relationships.

c. Overexploitation: Unsustainable harvesting or hunting of species can lead to population declines and even extinction. Overfishing, overhunting, and excessive removal of plant species can disrupt food chains, alter ecological dynamics, and impact the overall health of the ecosystem.

d. Disease Outbreaks: Disease outbreaks can impact the population dynamics of species within an ecosystem. Pathogens or parasites can spread among organisms, causing declines in populations or altering the interactions between species.

These disruptions to both the physical and biological components of the ecosystem in Chico, California, can have cascading effects on the overall ecosystem health, leading to changes in species composition, food web dynamics, nutrient cycling, and ecosystem services. It is important to understand and address these disruptions to ensure the long-term sustainability and resilience of the ecosystem.

To know more about ecosystem refer here

https://brainly.com/question/31459119#

#SPJ11

(a) Pb = 2π * N * T

(b) Pf = mf * CV

(c) Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%

To determine the brake power, fuel power, and brake thermal efficiency, we can use the following formulas:

(a) Brake Power (Pb):

Pb = 2π * N * T

Where N is the shaft speed in revolutions per minute (rpm) and T is the torque.

(b) Fuel Power (Pf):

Pf = mf * CV

Where mf is the fuel consumption rate in kilograms per second and CV is the calorific value of the fuel in joules per kilogram.

(c) Brake Thermal Efficiency (ηb):

ηb = (Pb / Pf) * 100%

Let's calculate these values using the given information:

(a) Brake Power:

Shaft Speed N = 2600 rev/min

Torque arm R = 16 cm = 0.16 m

The torque (T) can be calculated using the formula:

T = F * R

Brake Power (Pb) = 2π * N * T

(b) Fuel Power:

Fuel consumption mf = 2 g/s = 0.002 kg/s

Calorific Value (CV) = 42 MJ/kg = 42 × [tex]10^6[/tex] J/kg

Fuel Power (Pf) = mf * CV

(c) Brake Thermal Efficiency:

Brake Thermal Efficiency (ηb) = (Pb / Pf) * 100%

Let's substitute the given values into the equations and calculate the results.

To know more about brake power refer here

https://brainly.com/question/31456389#

#SPJ11

Answer:

.92 T

Explanation:

This is just a plug-and-chug question.

Here is the formula: B = uni

u = vacuum permeability = 4pi * 10^-7 this is a given constant

n = turns per meter = 1040/ (4.4*10^-2)

i = current = 31 A also given by the problem

so B = .92 T

The unit of the magnetic field is Tesla ("T")

When a neutral balloon is rubbed on your hair, the balloon becomes negatively charged because it gains electrons from your hair. The process of triboelectric charging occurs because of the difference in the materials' ability to give up or gain electrons.

When you rub an electrically neutral balloon on your hair, some electrons are transferred from your hair to the surface of the balloon. As a result, the balloon becomes negatively charged, and your hair becomes positively charged.

This is because electrons are negatively charged particles, and when they move from one object to another, the object that loses electrons becomes positively charged, and the object that gains electrons becomes negatively charged.

The process of transferring electrons from one object to another through friction is called triboelectric charging, and it occurs because some materials have a stronger tendency to give up electrons, while others have a stronger tendency to gain electrons.

In summary, when a neutral balloon is rubbed on your hair, the balloon becomes negatively charged because it gains electrons from your hair. The process of triboelectric charging occurs because of the difference in the materials' ability to give up or gain electrons.

To know more about electrons refer here:

https://brainly.com/question/19448078#

#SPJ11

The frequency of the 5th harmonic of a 5 Hz fundamental is 25 Hz.

To find the frequency of the 5th harmonic (h₅) of a 5 Hz fundamental, you need to multiply the fundamental frequency (f₁) by the harmonic number (n). The formula is:

fₙ = n*f₁

where:

fₙ = frequency of the nth harmonic

f₁ = fundamental frequency

n = harmonic number

In this case, the fundamental frequency (f₁) is 5 Hz and the harmonic number (n) is 5. So, the frequency of the 5th harmonic (h₅) would be:

h₅ = 5 * 5

= 25 Hz

To know more about frequency, here

brainly.com/question/5102661

#SPJ4

Answer:Assuming the mass of the spring is not changed, the frequency of the mass-spring system will increase if the length of the spring is cut into one third. This is because the frequency of a mass-spring system is inversely proportional to the square root of the length of the spring. Mathematically, the frequency (f) is given by:

f = 1 / (2π) x √(k/m)

where k is the spring constant and m is the mass of the system. Since the mass of the spring is not changing, if the length of the spring is cut into one third, the square root of the length will become √(1/3) = 0.577. Therefore, the frequency of the system will increase by a factor of 1/0.577, which is approximately 1.73 or √3.

Explanation:

The car will travel a distance of 180 meters in 12 seconds.

To determine the distance traveled by the car, we can use the equation of motion:

Distance (d) = Initial velocity (v₀) × time (t) + 0.5 × acceleration (a) × time squared (t²)

Given:

Initial velocity (v₀) = 0 m/s (starting from rest)

Acceleration (a) = 2.5 m/s²

Time (t) = 12 seconds

Plugging in the values into the equation:

Distance (d) = 0 × 12 + 0.5 × 2.5 × 12²

Distance (d) = 0 + 0.5 × 2.5 × 144

Distance (d) = 0 + 0.5 × 2.5 × 144

Distance (d) = 180 meters

To know more about equation of motion refer here

https://brainly.com/question/14355103#

#SPJ11