We see here that the article is actually talking about: B. Dr. Dituri's Project Neptune 100.
What is an article?A piece of writing known as an article is typically printed in a newspaper, magazine, or journal. It may address a variety of subjects, such as news, features, essays, research findings, and reviews.
We can see here that in the article, being referred to in the question is known as "A Chat With the Scientist Living Underwater for 100 Days,".
From the article, it is very clear that it refers to Dr. Dituri's Project Neptune 100. Retired Navy officer, Joseph Dituri is seeking to break the current record for longest period of time spent submerged.
Note: I can't post the article here. But I have provided the title of the article above.
Learn more about article on https://brainly.com/question/26859358
#SPJ1
What volume of oxygen gas can be collected
at 1.05 atm pressure and 44.0◦C when 42.5 g
of KClO3 decompose by heating, according to
the following equation?
2 KClO3(s) ∆
−−−−→
MnO2
2 KCl(s) + 3 O2(g)
Answer in units of L.
005 1.0 points
The volume of oxygen gas, O₂ collected at 1.05 atm pressure and 44.0 °C when 42.5 g of KClO₃ decomposed is 13.01 L
How do i determine the volume of oxygen gas collected?We shall begin by obtaining the mole in 42.5 g of KClO₃. Details below:
Mass of KClO₃ = 42.5 g Molar mass of KClO₃ = 122.5 g/mol Mole of KClO₃ =?Mole = mass / molar mass
Mole of CaC₂ = 42.5 / 122.5
Mole of CaC₂ = 0.35 mole
Next, we shall determine the mole of oxygen gas, O₂. produced. Details below:
2KClO₃ -> 2KCl + 3O₂
From the balanced equation above,
2 moles of KClO₃ decomposed to produced 3 mole of O₂
Therefore,
0.35 mole of KClO₃ will decompose to produce = (0.35 × 3) / 2 = 0.525 mole O₂
Finally, we shall determine the volume of oxygen gas, O₂ collected. Details below:
Pressure (P) = 1.05 atmTemperature (T) = 44 °C = 44 + 273 = 317 KGas constant (R) = 0.0821 atm.L/mol KNumber of mole (n) = 0.525 moleVolume of gas (V) =?PV = nRT
1.05 × V = 0.525 × 0.0821 × 317
Divide both sides by 1.05
V = (0.525 × 0.0821 × 317) / 1.05
Volume of oxygen gas = 13.01 L
Learn more about volume:
https://brainly.com/question/21838343
#SPJ1
a solution is made by mixing 100 ml of ethanol and 200 mL of water identified the solute of solvent of the solution and calculate the total volume of the solution
The solution has a total volume of 300 mL and is composed of 100 mL of ethanol (the solute) and 200 mL of water (the solvent).
Does a solution form when 50 mL of ethanol and 50 mL of water are combined?Less than 100 ml will result from mixing 50 ml each of ethanol and water in an equal ratio. This happens because ethanol molecules, which are smaller than those of water, may fit inside big water molecules. As a result, the alcohol content in a 250 mL mix of water and alcohol is 60%.
The combined volumes of the ethanol and water make up the total volume of the solution, which is:
Total volume = 100 mL + 200 mL = 300 mL
Therefore, the solution is made up of 100 mL of ethanol (the solute) and 200 mL of water (the solvent), with a total volume of 300 mL.
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
The critical point for water lies at 275 °C and 3.2 atm, calculate the DH°vap of water.
The ΔH°vap of water at the critical point is approximately 0.04614 kJ/mol.
To calculate the ΔH°vap (enthalpy of vaporization) of water at the critical point, we can use the Clausius-Clapeyron equation;
ln(P₂/P₁) = ΔH°vap/R [1/T₁ - 1/T₂]
where P₁ and T₁ are the pressure and temperature at which the enthalpy of vaporization is known (usually at standard conditions of 1 atm and 100 °C), P₂ and T₂ are the pressure and temperature at the critical point, ΔH°vap is the enthalpy of vaporization, and R is the gas constant (8.314 J/mol∙K).
Using the given values, we can plug them into the equation and solve for ΔH°vap;
ln(3.2 atm / 1 atm) = ΔH°vap / R [1/373 K - 1/275 K]
Simplifying;
ln(3.2) = ΔH°vap / R [0.0026819]
ΔH°vap / R = ln(3.2) / 0.0026819
ΔH°vap / R = 5.552
Multiplying both sides by R:
ΔH°vap = 5.552 x R
ΔH°vap = 5.552 x 8.314 J/mol∙K
ΔH°vap = 46.14 J/mol
Converting to kJ/mol;
ΔH°vap = 0.04614 kJ/mol
Therefore, the ΔH°vap of water is 0.04614 kJ/mol.
To know more about enthalpy of vaporization here
https://brainly.com/question/7311854
#SPJ1
How many grams of zinc chloride would be formed if 77.1 grams of zinc reacts?
Zn + HCl -->ZnCl2 + H2
The amount of zinc chloride that would be formed if 77.1 grams of zinc reacts is approximately 160.77 grams
To determine how many grams of zinc chloride ([tex]ZnCl_2[/tex]) would be formed if 77.1 grams of zinc (Zn) reacts, we'll use stoichiometry.
First, we need the molar masses of the substances involved:
Zn: 65.38 g/mol
[tex]ZnCl_2[/tex] : 136.29 g/mol
Now, we'll convert grams of Zn to moles:
77.1 g Zn × (1 mol Zn / 65.38 g Zn) = 1.179 moles Zn
According to the balanced chemical equation, 1 mole of Zn reacts to form 1 mole of [tex]ZnCl_2[/tex]:
1.179 moles Zn × (1 mol ZnCl₂ / 1 mol Zn) = 1.179 moles ZnCl₂
Finally, convert moles of ZnCl₂ to grams:
1.179 moles ZnCl₂ × (136.29 g ZnCl₂ / 1 mol ZnCl₂) ≈ 160.77 g ZnCl₂
So, approximately 160.77 grams of zinc chloride would be formed if 77.1 grams of zinc reacts.
For more question on molar masses
https://brainly.com/question/21334167
#SPJ11
Will we ever send humans to another planet? Most believe that if we were to travel to another planet, Mars would be the best option. Which of these would be a potential problem associated with travel to another planet?
Question 1 options:
we already know everything about Mars
no astronauts would ever volunteer for this mission
Mars has such a high gravity that it would crush humans and our spacecraft
the extended time for humans to be in space
A potential problem associated with travel to another planet is : the extended time for humans to be in space.
What is the potential problem associated with travel to another planet?It is highly likely that humans will travel to another planet, and Mars is currently considered the most viable option for human exploration. However, there are many potential problems associated with this endeavor, and one of the major issues is the extended time that humans would need to spend in space.
Traveling to Mars would take several months, and once there, astronauts would need to spend significant amount of time on planet before returning to Earth. This means that they would be exposed to high levels of radiation and would need to find ways to survive in harsh and unforgiving environment.
To know more about planets, refer
https://brainly.com/question/28430876
#SPJ1
Dimensional analysis with shapes
The surface area of the rectangular prism is 0.034 square meters.
For a rectangular prism with length l, width w, and height h, the surface area is:
Surface area = 2lw + 2lh + 2wh
Substituting the given values, we get:
Surface area = 2(10 cm x 5 cm) + 2(10 cm x 8 cm) + 2(5 cm x 8 cm)
Surface area = 100 cm² + 160 cm² + 80 cm² = 340 cm²
We can use dimensional analysis. So the conversion factor is:
1 m² / 10,000 cm²
Multiplying the surface area by this conversion factor, we get:
Surface area = 340 cm² x (1 m² / 10,000 cm²)
Surface area = 0.034 m²
To know more about rectangular prism, here
brainly.com/question/21308574
#SPJ1
--The complete Question is, What is the surface area of a rectangular prism that has a length of 10 cm, a width of 5 cm, and a height of 8 cm? Use dimensional analysis to convert the answer to square meters--
Explain why group 8 elements of the periodic table are referred to as group 0
Answer: They have eight outer electrons.
Explanation: They don't need any more electrons to be added to them and can't give out any electrons to other groups. They have a complete outer shell.
Three of the primary components of air are
carbon dioxide, nitrogen, and oxygen. In a
sample containing a mixture of only these
gases at exactly one-atmosphere pressure, the partial pressures of carbon dioxide and nitrogen are given as PCO2 = 0.285 torr and
PN2 = 580.502 torr. What is the partial pressure of oxygen?
Answer in units of torr.
The partial pressure of the oxygen is 0.236 atm.
What is partial pressure?The pressure that one gas component in a mixture of gases exerts is known as partial pressure. It is the pressure that the gas would experience if it took up the same amount of space in the mixture at the same temperature on its own.
We know that;
P[tex]CO_{2}[/tex] = 0.285 torr or 0.000375 atm
P[tex]N_{2}[/tex] = 580.502 torr or 0.764 atm
P[tex]O_{2}[/tex] = ?
Total pressure = 1 atm
Then we have that;
PT =P[tex]CO_{2}[/tex] +P[tex]N_{2}[/tex]+ P[tex]O_{2}[/tex]
P[tex]O_{2}[/tex] = PT - (P[tex]CO_{2}[/tex] + P[tex]N_{2}[/tex])
P[tex]O_{2}[/tex] = 1 - (0.000375 + 0.764)
P[tex]O_{2}[/tex]= 0.236 atm
Learn more about partial pressure:https://brainly.com/question/31214700
#SPJ1
What amount of heat, in kJ, is required to vaporize 181.20 g of ethanol (C₂H₅OH)? (∆Hvap = 43.3 kJ/mol)
The amount of heat required to vaporize 181.20 g of ethanol would be 170.1 kJ.
Heat of vaporizationUsing the formula:
Q = n ∆Hvap
where:
Q is the amount of heat required to vaporizen is the number of moles of the substance∆Hvap is the molar heat of vaporization.Moles of 181.20 g of ethanol = 181.20 g / 46.07 g/mol = 3.933 mol
Substituting the values:
Q = 3.933 mol x 43.3 kJ/mol = 170.1 kJ
In other words, the amount of heat required to vaporize 181.20 g of ethanol is 170.1 kJ.
More on heat of vaporization can be found here: https://brainly.com/question/30603212
#SPJ1
What is the minimum concentration of fluoride ions necessary to precipitate CaF2 from a 5.25 x 10-3 M solution of Ca(NO3)2? Ksp of CaF2 = 3.9 x 10-11
The minimum concentration of fluoride ions needed is 2.726 x 10⁻⁴ M.
How to solveTo find the minimum concentration of fluoride ions needed to precipitate CaF₂, we'll use the solubility product constant (Ksp) and the calcium ion concentration.
Ksp = [Ca²⁺][F⁻]²
Given: [Ca²⁺] = 5.25 x 10⁻³ M, Ksp = 3.9 x 10⁻¹¹
3.9 x 10⁻¹¹ = (5.25 x 10⁻³)[F⁻]²
Solve for [F⁻]:
[F⁻]² = (3.9 x 10⁻¹¹) / (5.25 x 10⁻³)
[F⁻]² = 7.4286 x 10⁻⁹
[F⁻] = 2.726 x 10⁻⁴ M
The minimum concentration of fluoride ions needed is 2.726 x 10⁻⁴ M.
Read more about concentration here:
https://brainly.com/question/17206790
#SPJ1
Is the following reaction endothermic or exothermic?
C3H8 + 5 O2 --> 3 CO2 + 4 H2O
H= -2200 kJ
Since the ΔH for the given reaction has negative value, the reaction is exothermic reaction.
A reaction that is exothermic is one in which power is given off as heat or light. In contrast to an endothermic process, which draws energy from its surroundings, an exothermic reaction transfers energy into the environment. The alteration in enthalpy (H) during an exothermic reaction will be negative. Since the ΔH for the given reaction has negative value, the reaction is exothermic reaction.
To know more about exothermic reaction, here:
https://brainly.com/question/10373907
#SPJ1
A solution of thickness 3cm transmits 30%. calculate the concentration of the solution. E= 400dm/mol/cm
The concentration of the solution is 0.000435 mol/dm³.
What is the concentration of the solution?The concentration of a solution is calculated as follows;
Concentration = (Absorbance) / (Molar absorptivity x path length)
the path length = 3cm
the molar absorptivity (E) = 400 dm/mol/cm.
if the solution transmits 30% of the light, it absorbs 70% of the incident light.
Absorbance = log (1/Transmittance)
Absorbance = log (1/0.3)
Absorbance = 0.523
Concentration = (0.523) / (400 dm/mol/cm x 3 cm)
= 0.000435 mol/dm³
Learn more about concentration here: https://brainly.com/question/26255204
#SPJ1
If the reaction A (aq) + B (aq) C(aq) has a Ka value equal to 4.26 x 10-6, what is the G value at 25 °C if the concentrations are as follows:
[A] = 1.50 M
[B] = 1.00 M
[C] = 5.00 x 10-5 M
The ΔG value for the reaction A (aq) + B (aq) → C(aq) at 25 °C and the given concentrations is -8.35 kJ/mol.
The relationship between ΔG and K is given by the following equation:
ΔG = -RTln(K)
where R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin (25 °C = 298.15 K), and ln denotes the natural logarithm.
To calculate K, we need to use the equilibrium expression and the given concentrations:
[tex]K = [C]/([A][B])[/tex]
[tex]K = (5.00 * 10^{-5} M)/((1.50 M)(1.00 M))[/tex]
[tex]K = 3.33 x 10^{-5}[/tex]
Now we can substitute the values for R, T, and K into the equation for ΔG:
ΔG = -RTln(K)
ΔG = [tex]-(8.314 J/(mol.K))(298.15 K)ln(3.33 x 10^{-5})[/tex]
ΔG = -8.35 kJ/mol
Therefore, the ΔG value for the reaction A (aq) + B (aq) → C(aq) at 25 °C and the given concentrations is -8.35 kJ/mol.
Learn more about Concentrations at
brainly.com/question/13872928
#SPJ1
How many moles of solute are in 2 L of an 8.0 M solution?
Answer: 4 moles i think this is right im not sure
How does the presence of coal in Antarctica support Wegener's continental drift hypothesis?
Answer:
Explanation:
Coal deposits have been found in Antarctica, particularly in the Transantarctic Mountains where they are interbedded in sedimentary rocks of the flat-lying Beacon Supergroup. The presence of coal in Antarctica supports Wegener's continental drift hypothesis because it suggests that Antarctica was once part of a larger landmass that had a warm climate suitable for the formation of coal. Coal is formed from ancient plant matter that has been compressed and heated over millions of years. The presence of coal in Antarctica suggests that the continent was once located closer to the equator and had a climate that supported lush vegetation.
Complete combustion of a 0.0200 mol sample of a hydrocarbon, CxHy, gives 4.032 L of CO2 at STP and 3.602 g of H2O.
(a) What is the molecular formula of the hydrocarbon? (b) What is the empirical formula of the hydrocarbon?
The hydrocarbon's molecular structure is [tex]C_9H_20[/tex].The hydrocarbon's empirical formula is [tex]C_9[/tex]/4H5.
To solve this problem, we need to use stoichiometry to relate the amount of [tex]CO__2[/tex] and [tex]H_2O[/tex] produced to the amount of [tex]CxHy[/tex] burned.
(a) To find the molecular formula of the hydrocarbon, we need to first calculate the number of moles of [tex]CO__2[/tex] and [tex]H_2O[/tex] produced. From the ideal gas law, we know that 1 mole of gas at STP (standard temperature and pressure) occupies 22.4 L. Therefore, 4.032 L of [tex]CO__2[/tex] at STP corresponds to:
4.032 L / 22.4 L/mol = 0.180 mol [tex]CO__2[/tex]
Similarly, the mass of H2O produced corresponds to:
3.602 g / 18.02 g/mol = 0.200 mol [tex]H_2O[/tex]
Since the hydrocarbon undergoes complete combustion, it reacts with oxygen to form [tex]CO__2[/tex] and [tex]H_2O[/tex] according to the balanced chemical equation:
[tex]CxHy[/tex] + (x + (y/4))O2 → [tex]CO__2[/tex] + (y/2)[tex]H_2O[/tex]
where x and y are the coefficients of the balanced equation. We can use the stoichiometric ratios to set up two equations:
0.180 mol [tex]CO__2[/tex] = x mol [tex]CxHy[/tex] → x = 0.180 mol / 0.0200 mol = 9
0.200 mol [tex]H_2O[/tex] = (y/2) mol [tex]CxHy[/tex] → y = 0.400 mol / 0.0200 mol = 20
Therefore, the molecular formula of the hydrocarbon is [tex]C_9H_20[/tex].
(b) To find the empirical formula of the hydrocarbon, we need to divide the subscripts by their greatest common factor. In this case, both subscripts are divisible by 4, so we get:
[tex]C_9H_20[/tex] → C9/4H5
Therefore, the empirical formula of the hydrocarbon is C9/4H5.
For more question on molecular
https://brainly.com/question/24191825
#SPJ11
What mass (grams) of sodium sulfate would be formed by the complete reaction of 137.3 grams of sodium hydroxide?
NaOH + H2SO4 --> Na2SO4 + HOH
The mass of sodium sulfate [tex](Na_2SO_4)[/tex] formed by the complete reaction of 137.3 grams of sodium hydroxide [tex](NaOH)[/tex] is 486.74 grams.
The balanced chemical equation for the reaction between sodium hydroxide [tex](NaOH)[/tex] and sulfuric acid [tex](H_2SO_4)[/tex] is:
[tex]NaOH[/tex] + [tex](H_2SO_4)[/tex] → [tex]Na_2SO_4[/tex] + [tex]2H_2O[/tex]
From the balanced equation, we can see that 1 mole of [tex]NaOH[/tex] reacts with 1 mole of [tex](H_2SO_4)[/tex] to produce 1 mole of [tex]Na_2SO_4[/tex] and 2 moles of water [tex](H_2O).[/tex]
The molar mass of [tex]NaOH[/tex] is 40.00 g/mol, which means that 137.3 grams of [tex]NaOH[/tex] is equal to 137.3 g / 40.00 g/mol = 3.4325 moles of [tex]NaOH[/tex].
Since 1 mole of [tex]NaOH[/tex] reacts with 1 mole of [tex](H_2SO_4)[/tex] to produce 1 mole of [tex](Na_2SO_4)[/tex] , we can say that 3.4325 moles of [tex]NaOH[/tex] will react with 3.4325 moles of [tex]H_2SO_4[/tex] to produce 3.4325 moles of [tex]Na_2SO_4[/tex].
The molar mass of [tex](Na_2SO_4)[/tex] is 142.04 g/mol, which means that 1 mole of [tex](Na_2SO_4)[/tex] has a mass of 142.04 g.
Therefore, 3.4325 moles of [tex](Na_2SO_4)[/tex] has a mass of 3.4325 moles x 142.04 g/mol = 486.74 grams.
For more such questions on reaction, click on:
https://brainly.com/question/29470602
#SPJ11
Identity the number of bonding pairs and lone pairs of electrons n2
There are 3 bonding pairs and 7 lone pairs of electrons in N2.
What is an electronAn atom's nucleus is orbited by an electron, a subatomic particle with a negative charge. Along with protons and neutrons, it is one of the elementary particles that make up matter. The mass of an electron is exceedingly small, it is roughly 1/1836 that of a proton.
To determine the number of lone pairs of electrons in N2, we need to subtract the number of bonding pairs from the total number of valence electrons:
Number of lone pairs = Total number of valence electrons - Number of bonding pairs
Number of lone pairs = 10 - 3
Number of lone pairs = 7
Therefore, there are 3 bonding pairs and 7 lone pairs of electrons in N2.
Learn more on covalent bonds here https://brainly.com/question/3447218
#SPJ1
2ch4 and c2h8 how are they different
Answer:
Explanation:
Both 2CH4 and C2H8 have the same number and kind of elements. But practically, 2CH4 will be existing but C2H8 cannot exist.
Haw many valance electrons in the following atoms.
O Na Sr
Answer:O has 6, Na has 1, and Sr has 2.
Explanation:
What is the family puzzle worksheet answer? Please make the pedigree and give me the answers
Interpreting Data:
Joshua's parents must be heterozygous carriers for cystic fibrosis (Nn).Bella's parents must be homozygous for the normal allele (NN).How to analyze family pedigrees?Predicting:
Joshua's brother has a 50% chance of being a carrier for cystic fibrosis (Nn) and a 50% chance of having the normal genotype (NN). This is because Joshua's parents are both carriers, so each of their children has a 50% chance of inheriting the recessive allele.
Communicating:
As a genetic counselor, information about many generations of a family is needed to draw conclusions about a hereditary condition because traits are passed down from generation to generation. By studying the family history, we can identify patterns of inheritance and determine the likelihood that a person has inherited a certain trait. This information can help us make informed decisions about genetic testing and treatment options.
Additionally, knowing the family history can help us determine the risk of passing on a genetic condition to future generations.
Find out more on pedigree here: https://brainly.com/question/14525981
#SPJ1
Image transcribed and complete question:
Family Puzzle
Problem
A husband and wife want to understand the probability that their children might inherit cystic fibrosis. How can you use the information in the labeled Case Study to predict the probability?
Skills Focus
interpreting data, predicting
Materials
12 index cards
scissors marker
Procedure
1. Read the Case Study. In your notebook, draw a pedigree that shows all the family members. Use circles to represent the females, and squares to represent the males. Shade in the circles or squares representing the individuals who have cystic fibrosis.
2. You know that cystic fibrosis is controlled by a recessive allele. To help you figure out Joshua and Bella's family pattern, create a set of cards to represent the alleles. Cut each of six index cards into four smaller cards. On 12 of the small cards, write N to represent the dominant normal allele. On the other 12 small cards, write n for the recessive allele.
Case Study:
Joshua and Bella
• Joshua and Bella have a son named lan. lan has been diagnosed with cystic fibrosis.
⚫ Joshua and Bella are both healthy.
• Bella's parents are both healthy.
• Joshua's parents are both healthy. • Joshua's sister, Sara, has cystic fibrosis.
Analyze and Conclude
Write your answers in the spaces provided.
1. Interpreting Data What were the genotypes of Joshua's parents? What were the genotypes of Bella's parents?
2. Predicting Joshua also has a brother. What is the probability that he has cystic fibrosis? Explain.
3. Communicating Imagine that you are a genetic counselor. A couple asks why you need information about many generations of their families to draw conclusions about a hereditary condition. Write an explanation you can give to them.
More to Explore
Review the pedigree that you just studied. What data suggest that the traits are not sex-linked? Explain.
( + 0₂ (0₂ 1 Is the molecular mas of carbon is 12 and that of oxygen is 32, Calculate the mass of carbon dioxide formed when 24kg of carbon is burnt completely in oxygen and determine the heat thereby released in MJ if the complete combustion of 1kg of carbon releases 33.8MJ of heat
The mass of carbon dioxide formed when 24 kg of carbon is burnt completely in oxygen is 88 kg, and the heat released is 811.2 MJ.
What is Molar Mass?
Molar mass is the mass of one mole of a substance and is expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms in a molecule or formula unit of a compound. The molar mass is used in stoichiometry calculations to convert between mass and moles of a substance.
The balanced equation for the combustion of carbon is:
C + O₂ → CO₂
From the equation, we can see that one mole of carbon reacts with one mole of oxygen to produce one mole of carbon dioxide. The molar mass of carbon dioxide is 12 + (2 × 16) = 44 g/mol.
First, let's find the number of moles of carbon in 24 kg:
n(C) = m/M = 24000 g / 12 g/mol = 2000 mol
Therefore, 2000 mol of CO₂ will be produced.
The mass of CO₂ produced can be calculated as:
m(CO₂) = n(CO₂) × M(CO₂) = 2000 mol × 44 g/mol = 88,000 g = 88 kg
Now, let's calculate the heat released during combustion:
Heat released = 33.8 MJ/kg × 24 kg = 811.2 MJ
Learn more about Molar Mass from the given link
https://brainly.com/question/837939
#SPJ9
Calculate the energy difference (deltaE, in Joules) of an electron's transition from n = 6 to n = 1 in a hydrogen atom.
The energy difference of an electron's transition from n = 6 to n = 1 in a hydrogen atom is approximately -2.17 × 10⁻¹⁸ Joules.
To calculate the energy difference (deltaE) of an electron's transition from n = 6 to n = 1 in a hydrogen atom, we can use the following equation:
deltaE = -13.6 * (1/n_final^2 - 1/n_initial^2) eV
where n_initial is the initial energy level (6 in this case), n_final is the final energy level (1 in this case), and -13.6 eV is the ionization energy of hydrogen.
Converting eV to Joules, we get:
1 eV = 1.602 x 10^-19 J
Therefore, deltaE in Joules can be calculated as follows:
deltaE = -13.6 * (1/1^2 - 1/6^2) * 1.602 x 10^-19 J/eV
deltaE = -2.179 x 10^-18 J
Therefore, the energy difference (deltaE) of an electron's transition from n = 6 to n = 1 in a hydrogen atom is -2.179 x 10^-18 J.
To calculate the energy difference (ΔE) for an electron's transition from n = 6 to n = 1 in a hydrogen atom, you can use the following formula:
ΔE = -13.6 eV * (1/nf² - 1/ni²)
Where ΔE is the energy difference in electron volts (eV), nf is the final energy level (1 in this case), and ni is the initial energy level (6 in this case).
ΔE = -13.6 eV * (1/1² - 1/6²)
ΔE ≈ -13.56 eV
Now convert electron volts to Joules:
1 eV = 1.6 × 10⁻¹⁹ J
ΔE ≈ -13.56 eV * 1.6 × 10⁻¹⁹ J/eV
ΔE ≈ -2.17 × 10⁻¹⁸ J
So, approximately -2.17 × 10⁻¹⁸ Joules is the energy difference of an electron's transition from n = 6 to n = 1 in a hydrogen atom.
For more question on energy difference
https://brainly.com/question/30951970
#SPJ11
* For all 3 trials find the moles of KHC8H4O4 using the grams of KHC8H4O4. Show all work!
* Use the mole ratio from question 1 to find the moles of NaOH used. Remember, in a 1:1 ratio if we use 1 mole of KHC8H4O4, then we use 1 mole of NaOH. Record the moles of NaOH used in each trial below.
Trial 1 ________________
Trial 2 ________________
Trial 3 ________________
At equivalence point, the reaction is seen to consume approximately 0.0024973 moles of KHP and then 0.0024973 moles of NaOH
How to calculate the mole ratio?The primary aim in this problem is to standardize a solution of the sodium hydroxide, NaOH, with the aid of potassium hydrogen phthalate, KHP.
The beginning point in this problem is the balanced chemical equation with respect to this neutralization reaction
KHP (aq] + NaOH(aq] → KNaP(aq] + H₂O(l]
The important thing that we are going to observe is that there is a ratio of 1:1 mole ratio between the two reactants. This suggests to us that the equivalence point can be attained by getting equal number of moles of KHP and of NaOH to react with each other.
We will begin with 0.5100 g of KHP. To obtain the molar amount of acid utilized for the experiment, we will make use of its molar mass of 0.5100g⋅
molar mass of KHP
1 mole KHP 204.22g = 0.0024973 moles KHP
Thus, at equivalence point, the reaction is seen to consume approximately 0.0024973 moles of KHP and then 0.0024973 moles of NaOH, due to the fact that it's what the 1:1 mole ratio suggests to us.
Read more about Mole Ratio at: https://brainly.com/question/30632038
#SPJ1
A 2.550×10−2 M glycerol solution (C3H8O3) in water is at 20.0 ∘C . The sample was created by dissolving a sample of C3H8O3 in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 998.9 mL. The density of water at 20.0 ∘C is 0.9982 g/mL
a.) Calculate the molality of the glycerol solution
b.) Calculate the mole fraction of glycerol in this solution
c.) Calculate the concentration of the glycerol solution in percent by mass
d.) Calculate the concentration of the glycerol solution in parts per million by mass
The molality of the solution is 0.0256 m.
The mole fraction of glycerol is 0.00046
The percent by mass concentration of glycerol is 0.23%
The ppm concentration is 2300 ppm
What is the molality?Molality is a measure of the concentration of a solute in a solution. It is defined as the number of moles of solute per kilogram of solvent.
The formula for molality is:
molality = moles of solute / mass of solvent in kilograms
1) Density of water = mass/volume
Mass of water = Density * volume of water
Mass =[tex]0.9982 g/mL * 998.9 mL[/tex]
Mass =0.997 Kg of water
Number of moles of the glycerol = [tex]2.550* 10^-2 M * 1 L[/tex]
= [tex]2.550*10^-2[/tex] moles
Molality of the solution = [tex]2.550*10^-2[/tex] moles/0.997 Kg
= 0.0256 m
Number of moles of water = 998.9/18 g/mol
= 55.5 mole
Mole fraction of glycerol = [tex]2.550*10^-2[/tex] /[tex]2.550*10^-2[/tex] + 55.5
= 0.00046
By percent by mass;
2.3/1001.2 * 100/1
= 0.23%
Mass of glycerol = 2.3 g
Volume of solution = 1 L
Thus we have concentration in ppm as;
[tex]2.3 * 10^3[/tex] mg/ 1 L =2300 ppm
Learn more about molality:https://brainly.com/question/26921570
#SPJ1
2. A slice of chocolate cake contains 560 Calories. a. Determine the number of calories found in the slice of cake. b. Determine the number of joules of energy for the slice of cake. c. Determine the number of kilojoules of energy for the slice of cake. 3. Determine the number of calories in 1.5 kilojoules of energy.
SHIW WORK
b. To determine the number of joules of energy for the slice of cake, we need to convert the calories to joules using the conversion factor 1 calorie = 4.184 joules:
Number of joules = 560 calories * 4.184 joules/calorie = 2343.04 joules
Therefore, the slice of cake contains 2343.04 joules of energy.
c. To determine the number of kilojoules of energy for the slice of cake, we can divide the number of joules by 1000:
Number of kilojoules = 2343.04 joules / 1000 = 2.34304 kilojoules
Therefore, the slice of cake contains 2.34304 kilojoules of energy.
To determine the number of calories in 1.5 kilojoules of energy, we need to convert kilojoules to calories using the conversion factor 1 kilojoule = 1000 calories:
Number of calories = 1.5 kilojoules * 1000 calories/kilojoule = 1500 calories
Therefore, 1.5 kilojoules of energy contains 1500 calories.
Explanation:
Answer:
2. a. 560 Calories, b. 2343.04 J, c. 2.34304 kJ
3. 358.508604 Cal
Explanation:
2.
a. The number of calories found in the slice of chocolate cake is 56012.
b. To determine the number of joules of energy for the slice of cake, we can use the conversion factor that 1 calorie is equal to 4.184 joules3. Therefore, the number of joules in the slice of cake is:
560 Cal ⋅ 4.184 J/ 1 Cal = 2343.04J
c. To determine the number of kilojoules of energy for the slice of cake, we can use the conversion factor that 1 kilojoule is equal to 1000 joules4. Therefore, the number of kilojoules in the slice of cake is:
2343.04 J ⋅ 1 kJ/1000 J = 2.34304 kJ
3. To determine the number of calories in 1.5 kilojoules of energy, we can use the conversion factor that 1 kilojoule is equal to 239.005736 calories1. Therefore, the number of calories in 1.5 kilojoules of energy is:
1.5 kJ ⋅ 239.005736 Cal / 1 kJ = 358.508604 Cal
How does the frequency of a string affect its wavelength?
Answer:
as the frequency goes down, the speed goes down by the same factor, and so the wavelength doesn't change.
Explanation:
Answer: as the frequency goes down, the speed goes down by the same factor, and so the wavelength doesn't change.
Explanation:
A sample of an ideal gas has a volume of 2.31 L
at 279 K
and 1.01 atm.
Calculate the pressure when the volume is 1.09 L
and the temperature is 308 K.
We can use the combined gas law to determine the pressure of the gas at the final state. The combined gas law relates the pressure, volume, and temperature of a gas:
(P1 x V1) / T1 = (P2 x V2) / T2
where P1, V1, and T1 are the pressure, volume, and temperature of the gas at the initial state, and P2, V2, and T2 are the pressure, volume, and temperature of the gas at the final state.
We are given the initial pressure (P1 = 1.01 atm), volume (V1 = 2.31 L), and temperature (T1 = 279 K) of the gas, and the final volume (V2 = 1.09 L), and temperature (T2 = 308 K) of the gas. We can solve for P2, the final pressure of the gas:
(P1 x V1) / T1 = (P2 x V2) / T2
P2 = (P1 x V1 x T2) / (V2 x T1)
P2 = (1.01 atm x 2.31 L x 308 K) / (1.09 L x 279 K)
P2 = 2.41 atm (rounded to three significant figures)
Therefore, the pressure of the gas when the volume is 1.09 L and the temperature is 308 K is approximately 2.41 atm.
Write the electronic configuration of all the metal ions in the d-blocks (3d series)
The electronic configuration of the d-block metal ions in the 3d series is represented by electronic configuration of Argon (Ar), 3d and 4s sub orbitals.
What is the electronic configuration of all d block?The electronic configuration of the d-block metal ions in the 3d series is as follows:
Scandium (Sc): [Ar] 3d¹ 4s²
Titanium (Ti): [Ar] 3d² 4s²
Vanadium (V): [Ar] 3d³ 4s²
Chromium (Cr): [Ar] 3d⁵ 4s¹
Manganese (Mn): [Ar] 3d⁵ 4s²
Iron (Fe): [Ar] 3d⁶ 4s²
Cobalt (Co): [Ar] 3d⁷ 4s²
Nickel (Ni): [Ar] 3d⁸ 4s²
Copper (Cu): [Ar] 3d¹⁰ 4s¹
Zinc (Zn): [Ar] 3d¹⁰ 4s²
Thus, the above illustration shows the electronic configuration of all the metal ions in the d-blocks (3d series).
Learn more about electronic configuration here: https://brainly.com/question/26084288
#SPJ1
You have 20.7 grams of water at -25.34 °C. You want to warm it to 155.0 °C. Use the information below to calculate how much heat this will require.
Csolid = 2.09 J/(g·°C)
ΔHfus = 333 J/g
Cvapor = 2.03 J/(g·°C)
ΔHvap = 2260 J/g
Answer:
Cvapor = 2.03 J/(g·°C)heu