The amplitude of the wave in the picture below is... Select one: a. 1 cm b. 1.5 cm c. 2 cm d. 3 cm

The Amplitude Of The Wave In The Picture Below Is... Select One: A. 1 Cm B. 1.5 Cm C. 2 Cm D. 3 Cm

Answers

Answer 1

Answer:

1cm

Explanation:

The amplitude of a wave is the distance from the center line (in this case the 1 cm marker on the vertical ruler) to the highest or lowest point. For this image the highest point is 2 cm, 2cm-1cm=1cm. The lowest point is 0cm, 1cm-0cm=1cm.

Answer 2

The amplitude of the wave is 1 cm. So, the correct option is a.

What is meant by amplitude of a wave ?

A point on a vibrating body or wave can move up to its maximum distance or displacement when measured from its equilibrium position, which is known as the amplitude. It is equivalent to the length of the vibration path divided in half.

Here,

The crests and trough of a wave is given. Amplitude can also be defined as the peak distance of the crest or trough of the wave.

From the given diagram, we can say that the sum of heights of the crest and trough is given as 2 cm. So, that will be the total vibration path. So, half of its length will give the amplitude of the wave.

Therefore, the amplitude of the wave,

A = 2/2 = 1 cm

Hence,

The amplitude of the wave is 1 cm. So, the correct option is a.

To learn more about amplitude, click:

https://brainly.com/question/2820902

#SPJ2


Related Questions

A resistor has a resistance of 8.2 kΩ. If a voltage of 15.9 V were placed across it, what would be the current, in mA? Give the answer to two decimal places; don't worry if the computer adds zeroes.

Answers

The value of the electric current for the given conditions willl be  1939.02 A.

What is ohm’s law?

Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.

Ohm's law claims that the voltage across a conductor is direct to the current flowing through it. This current-voltage connection may be expressed mathematically as,

V=IR

15.9 V = I × 8.2 × 10³ Ω

I = 1939.02 A

Hence, the value of the electric current for the given conditions willl be  1939.02 A.

To learn more the ohm's law refer to the link;

https://brainly.com/question/796939

#SPJ1

A person who falls between introversion and extroversion is

Answers

Answer:

the answer is ambivert have a good fourth of July

Answer:

i believe the answer is ambivert

A body moves in an x-y plane with a velocity vm/s. The component of v are Vx=5m/s, Vy=7m/s along x and y axis respectively. What is the magnitude and direction of the velocity

Answers

the answer is in the picture ok

good luck don't worry it's a correct

#carry on learning

What is the frequency of light with a wavelength of 2.10 × 10-7 m?

Answers

Answer:

V = ?

C = 3 × 10^8

wavelength = 2.10 × 10^-7

wavelength = C/V

V = C/wavelength

V = 3 × 10^8/2.10 × 10^-7

V = 1.43 × 10^ 15

What is the force of gravity in water​

Answers

There is a gravitational force because the special water has mass.
Objects with mass have a gravitational interaction with the Earth.
The magnitude of this gravitational force is equal to the mass (in kilograms) multiplied by the local gravitational field (g = 9.8 N/kg).

Need help with this question!

Answers

Answer:(note that values will be on top in small)

cobalt :- 60Co

potassium :- 40K

neon :- 24Ne

lead :- 208Pb

A satellite circles the Earth in an orbit whose radius is twice the Earth’s radius. The Earth’s mass is 5.98 x 1024 kg, and its radius is 6.38 x 106 m. What is the period of the satellite?

Answers

Hello!

Recall the period of an orbit is how long it takes the satellite to make a complete orbit around the earth. Essentially, this is the same as 'time' in the distance = speed * time equation. For an orbit, we can define these quantities:

[tex]d = 2\pi r[/tex] ← The circumference of the orbit

speed = orbital speed, we will solve for this later

time = period

Therefore:

[tex]T = \frac{2\pi r}{v}[/tex]

Where 'r' is the orbital radius of the satellite.

First, let's solve for 'v' assuming a uniform orbit using the equation:
[tex]v = \sqrt{\frac{Gm}{r}}[/tex]

G = Gravitational Constant (6.67 × 10⁻¹¹ Nm²/kg²)

m = mass of the earth (5.98 × 10²⁴ kg)

r = radius of orbit (1.276 × 10⁷ m)

Plug in the givens:
[tex]v = \sqrt{\frac{(6.67*10^{-11})(5.98*10^{24})}{(1.276*10^7)}} = 5590.983 m/s[/tex]

Now, we can solve for the period:

[tex]T = \frac{2\pi (1.276*10^7)}{5590.983} =\boxed{ 14339.776 s}[/tex]

Question 2 of 25
What is the term for a pair of forces described by Newton's third law?

A.
Normal-friction pair

B.
Action-reaction pair

C.
Kinetic-static pair

D.
Inertia-movement pair

Answers

The term for a pair of forces described by Newton's third law is action-reaction pair. Details about Newton's law can be found below.

What does Newton's third law state?

Newton's third law of motion states that for every action, there is an equal and opposite reaction.

This law proposed that when an object 1 acts on object 2 with a force of a particular magnitude, object 2 also acts on object 1 with an opposite force of same magnitude.

Therefore, it can be said that the term for a pair of forces described by Newton's third law is action-reaction pair.

Learn more about Newton's third law at: https://brainly.com/question/23772134

#SPJ1

The following equation shows the position of a particle in time t, x=at2i + btj where t is in second and x is in meter. A=2m/s2, b=1m/s. Find
A, the average velocity of the particle in the time interval t₁=2sec and t₂=3sec
B, the velocity and acceleration at any time t.
C, the average acceleration in the time interval given in part (a)
will give brilliance ​

Answers

A. The average velocity of the particle in the time interval t₁=2sec and t₂=3sec is 4 i m/s.

B. The velocity and acceleration at any time t is  4t i +1 j and 4i.

C. The average acceleration in the time interval given in part (a) is 4

What is acceleration?

Acceleration can be defined as the rate change of velocity with time.

acceleration a = (Δv) / (Δt)

Given the following equation shows the position of a particle in time t, x=at² i + bt j

where t is in second and x is in meter. a=2m/s², b=1m/s.

A. Velocity is time rate of change of displacement.

V = dx/dt

V = d/dt (2t² i + 1t j)

V = 4t i +1 j

Velocity in time interval,

At  t₁=2sec , V₂= 4x2 i + 1 j = 8 i + 1 j

At  t₂=3sec, V₃ = 4x3 i + 1 j = 12 i + 1 j

Average velocity in time interval t₁=2sec and t₂=3sec is

, V₃ - V₂ = (12 i + 1 j) - ( 8 i + 1 j )

Average velocity =  4 i

B. Velocity at time t, is

V(t) = V = 4t i +1 j

Acceleration a = dV/dt

a(t) = d/dt (4t i +1 j)

a(t) = 4 i +0 j

C. Average acceleration in time interval t₁=2sec and t₂=3sec is

a = 4 m/s²

Learn more about acceleration.

https://brainly.com/question/12550364

#SPJ1

Select. The star cycle that is accurate

Answers

One stellar-mass star, red giants, white dwarfs, or planetary nebulae will make up the correct star cycle. Option C is correct.

What is the solar system?

The satellites of the planet, countless comets, asteroids, and meteoroids, as well as the interplanetary medium, make up the solar system.

The complete question is;

"Choose the correct star life cycle.

A. Supernova, star as well as red giant, the nebula is incorrect.

B. Nebula, white dwarf, planetary nebula That is incorrect.

C. Planetary nebula, red giant, white dwarf, and star with a single stellar mass That is true!

D. Nebula, a star of one stellar mass, is not correct. It is correct if the star had four or more stellar masses."

Star of one stellar mass, red giant, white dwarf, and planetary nebula make up the proper life cycle.

Hence option C is correct.

To learn more about the solar system refer to the link;

https://brainly.com/question/1207587

#SPJ1

Lucia wants to change the motion map shown so that it’s shows uniform circular motion. What change should Lucia make ?

Answers

Answer:

The last one - each  vector pointing towards the center of the circle must be the same length for uniform circular motion

What is the acceleration of Karla's I Phone being thrown from Mr. Higley's classroom at 0m/s if it hits the wall 1.2 seconds later going 35 m/s?

Answers

The acceleration of Karla's I IPhone being thrown from Mr. Higley's classroom at 0 m/s will be 29.16 m/s²

What is acceleration?

The rate of velocity change concerning time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.

The pace at which a body's velocity varies is represented by acceleration, which is a vector quantity.

The given data in the problem is given by ;

u is the initial speed =  0 m/sec

v is the final speed= 35  m/sec

t is the time interval= 1.2 second

a is the acceleration=? m/sec²

The formula for acceleration is;

[tex]\rm a=\frac{v-u}{t} \\\\ a= \frac{35-0}{1.2} \\\\ a= 29.16 \ m./s^2[/tex]

Hence, the acceleration of Karla's iPhone being thrown from Mr. Higley's classroom at 0 m/s will be 29.16 m/s²

To learn more about acceleration, refer to the link;

https://brainly.com/question/2437624#SPJ2

#SPJ1

A certain spring has a spring constant k1 = 660 N/m as the spring is stretched from x = 0 to x1 = 35 cm. The spring constant then changes to k2 = 250 N/m as the spring is stretched to x2 = 65 cm. From x2 = 65 cm to x3 = 89 cm the spring force is constant at F3 = 105 N.
Write an equation for the work done in stretching the spring from x1 to x2.
Calculate the work done, in joules, in stretching the spring from x1 to x2.
Calculate the work, in joules, necessary to stretch the spring from x = 0 to x3.

Answers

(a) The equation for the work done in stretching the spring from x1 to x2 is ¹/₂K₂Δx².

(b) The work done, in stretching the spring from x1 to x2 is 11.25 J.

(c) The work, necessary to stretch the spring from x = 0 to x3 is 64.28 J.

Work done in the spring

The work done in stretching the spring is calculated as follows;

W = ¹/₂kx²

W(1 to 2) = ¹/₂K₂Δx²

where;

k is spring constantΔx is compression of the spring

W(1 to 2)  =  ¹/₂(250)(0.65 - 0.35)²

W(1 to 2)  = 11.25 J

W(0  to 3) = ¹/₂k₁x₁² + ¹/₂k₂x₂² + ¹/₂F₃x₃

where;

k₁ is first spring constantk₂ is second spring constantF₃ is third force applied to the spring

W(0  to 3) = ¹/₂(660)(0.35)² + ¹/₂(250)(0.65 - 0.35)² + ¹/₂(105)(0.89 - 0.65)

W(0  to 3) = 64.28 J

Learn more about work done here: https://brainly.com/question/25573309

#SPJ1

Why is it important to remember "association, not
causation" when discussing correlations?

Answers

It is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.

What is the value of associations in science?

The associations among variables have a fundamental value in science because they can determine how such variables behave in hypothetical situations.

Moreover, correlation only indicates a type of association between variables and therefore it is less informative.

In conclusion, it is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.

Learn more about associations in science here:

https://brainly.com/question/26998752

#SPJ1

what type of energy does a pv cell create ?

Answers

Answer:  Solar Photovoltaic (PV) cells generate electricity by absorbing sunlight and using that light energy to create an electrical current. There are many PV cells within a single solar panel, and the current created by all of the cells together adds up to enough electricity to help power your school, home and businesses.

                              --Cited from Solar Schools

I’m not exactly sure but I hope some one can answer it

A 0.15-kilogram baseball moving at 43 meters per second was stopped by the catcher’s glove in 0.050 seconds. What was the average force exerted on the ball by the glove? Round your answer to two significant figures.

Answers

The average force exerted on the ball by the glove will be 129 N.

What is force?

Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.

Given data;

Mass,(m)=0.15-kilogram

Initial speed,u=43 meters per second

Time period,t= 0.050 seconds

Average force exerted,F=?

The average force exerted on the ball by the glove is;

[tex]\rm F = m\frac{v-u}{t} \\\\ F=0.15( \frac{43-0}{0.050} )\\\\ F=129 N[/tex]

Hence, the average force exerted on the ball by the glove will be 129 N.

To learn more about the force refer to the link;

https://brainly.com/question/26115859

#SPJ1

An object weighs 200N, what is its mass?​

Answers

Answer:

kg

Explanation:

the highr and jebad to kilogram mizans

Answer:

w=m×g

Explanation:

w is given and take g as 9.8m/s^2

2. Two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M (see figure). M r m L m Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects. Is the rod being compressed, stretched, or neither? If compressed/stretched, calculate the magnitude of this deformation force on the rod. If neither, explain clearly why.

Answers

The rod is stretched due to the force of gravitational attraction.

The magnitude of the deformation force on the rod is  -GMm×((1/r² + 1/(L+r)²)

What is gravity?

The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.

The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.

F = GMm/R²

Given are two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M.  Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects.

Let the mass closer to the planet is A and the other is B

FA = Force on planet A = -GMm/r²

FB = Force on planet B = -GMm/(L+r)²

Net Force on the rod is given by the addition of the individual forces.

Fnet= FA + FB = -GMm/r² -GMm/(L+r)²

Fnet = -GMm×((1/r² + 1/(L+r)²)

Thus,  the magnitude of the deformation force on the rod is derived above.

A experience more force than B, so A will stretch out from B. Hence the force is stretching the rod.

Learn more about gravity.

brainly.com/question/4014727

#SPJ1

A pendulum swings to and fro every 2.0 s. The period of the swing is.
O 2 Hz
2 s
O 0.5 s
O 0.5 Hz

Answers

Answer:

Explanation:

Solution

In physics, a period is a measurement of time. The answer must be either B or C. It is a direct measurement of time, not its reciprocal. So the answer is B. A and D is a measurement of the actual cycle that it takes before the motion begins to repeat itself.

Answer

B

A hydrogen bond forms by the electrostatic interaction of opposite charges in two molecules. If
the bond length is 2x10 -10 m and the magnitude of the charges involved is
approximately 1.60x10 -20C, what is the force between the molecules involved in the bond?

Answers

The force between the molecules involved in the bond is 6. 426 *10^-11 Newton

How to determine the force

Using the formula:

F = K[q1 x q2]/D^2

where K is coulombs constant =9 *10 ^9 Nm^2/C^2.

q1  and q2 = charges  =  1.60x10 -20C

d = distance between the charges = 2x10 -10 m

Substitute the values into the formula

F =  [tex]9 * 10^9\frac{ 1.60*10^ -20 * 1.60 *10^ -20}{2x10^ -10^{2} }[/tex]

F = [tex]9 *10^9\frac{2. 856* 10^-40}{4* 10^-20}[/tex]

F = [tex]9* 10^9 * 7. 14* 10^-21[/tex]

F = [tex]6. 426 * 10^-11[/tex] Newton

Thus, the force between the molecules involved in the bond is 6. 426 *10^-11 Newton

Learn more about electrostatic force here:

https://brainly.com/question/8424563

#SPJ1

Two identical 3.0-kg cubes are placed on a horizontal surface in
contact with one another. The cubes are lined up from left to
right and a force F₁ is applied to the left side of the left cube
causing both cubes to move at a constant speed v. If the
coefficient of kinetic friction between the cubes and the
surface is 0.3, what is the magnitude of the force exerted by the
left cube on the right cube?
(3

Answers

The magnitude of the force exerted by the left cube on the right cube is 17.64N.

What is frictional force?

When an object is moving on a rough surface, it experiences opposition. This opposing force is called the friction.

Two identical 3.0-kg cubes are placed on a horizontal surface in contact with one another. The cubes are lined up from left to right and a force F₁ is applied to the left side of the left cube causing both cubes to move at a constant speed v. The coefficient of kinetic friction between the cubes and the surface is 0.3.

From the equilibrium of forces in vertical direction

Normal force N= 2m x g

friction force f = μN =μ(2m)g

From the equilibrium of forces in horizontal direction

F₁ =ma =0

using Newton's third law of motion, we get

F₁  - f =0

F₁  =f = μ(2m)g

Put the values, we get

F₁  = 17.64N

Thus, magnitude of the force exerted by the left cube on the right cube is 17.64N.

Learn more about friction force.

https://brainly.com/question/1714663

#SPJ1

Two force of 20N and 40N act at a
Point and the angle between them is 50 degrees.
Find the resultant force
Find the direction using sine rule

Answers

R=√20²+40²+2.20.40 cos 50

R=55 N

R/sin β = F/sin α

55/sin 50 = 40/sin α

α = 33°

The glucometer applies a potential difference of 0.90 volts across a blood sample. The glucose concentration of the blood sample is 0.98 grams/litre. Determine the current in the blood sample. ​

Answers

The amount of current in the blood sample is determined as 0.12 A.

Current in the blood

The current in the blood is calculated by applying Ohm's law as shown below;

V = IR

where;

V is voltageI is currentR is resistance

From resistivity chart corresponding to 0.98 g/L, resistance, R = 7.4

I = V/R

I = 0.9 /7.4

I = 0.12 A

Learn more about current here: https://brainly.com/question/25537936

#SPJ1

Water flows with a volume flow rate of 1.44 m³/s in a pipe. Find the water speed where the pipe radius is 0.430 m.

Answers

Answer:

0.6192

Explanation:

1.44 x 0.430=0.6192

The road from city A to city B is described by a car with Vm 40 km / h. When the car turns (from B to A) the average speed is 60 km / h. Find the average round trip speed.​

Answers

Answer:

i think the answer is 20.......

. Two planets, both of mass m, are separated by a distance d. Their relative velocity is negligible, and there is an inertial frame in which both planets are essentially at rest. The gravitational potential u(r) at the position r in the presence of the two planets, located at R1 and R2, is given as u(r) = − Gm R1 −r − Gm R2 −r . This problem takes place far out in space and there are no other massive objects in the vicinity of the two planets. (a) Draw a graph of u as a function of position (r) along the line between the two planets. (b) There are space stations Alpha and Beta located on the line between the planets. Both space stations are at rest with respect to the planets. Alpha is at distance d 4 from planet 1 and Beta is at distance d 3 from planet 2. A projectile of mass m is fired from station Alpha, with its velocity v pointing directly at planet 2. What is the minimum speed v which will permit the projectile to reach station Beta?

Answers

(a) A graph of u as a function of position (r) along the line between the two planets is attached below.

(b) The minimum speed v which will permit the projectile to reach station Beta is √ [Gm/3d]

What is gravitational potential energy?

If an object is lifted, work is done against gravitational force. The object gains energy.

Given are two planets, both of mass m, are separated by a distance d. Their relative velocity is negligible, and there is an inertial frame in which both planets are essentially at rest. The gravitational potential u(r) at the position r in the presence of the two planets, located at R1 and R2, is given as

u(r) = − (Gm /R1 −r) − (Gm / R2 −r) .

This problem takes place far out in space and there are no other massive objects in the vicinity of the two planets

(a) A graph of u (r)  versus position (r) along the line between the two planets is attached in answer.

(b) There are space stations Alpha and Beta located on the line between the planets. Both space stations are at rest with respect to the planets. Alpha is at distance d 4 from planet 1 and Beta is at distance d 3 from planet 2. A projectile of mass m is fired from station Alpha, with its velocity v pointing directly at planet 2.

The range of the projectile is given by R =  v²sin2θ / g

g = gravitational acceleration of Earth

If g = g(p) for planet , range  R =  v²sin2θ / g(p)..................(1)

The gravitational force of attraction = weight force

Gm² /d² = m g(p)

g(p) = Gm/d².........................(2)

For R = d/3, from equation (1), we have

d/3 =  v²sin2θ / g(p)

Plug the expression for g(p) , we get

v = √ [Gm/3dsin2θ ]

For velocity to be minimum, sin2θ =1

So, the minimum velocity will be

v = √ [Gm/3d]

Thus, the minimum speed v which will permit the projectile to reach station Beta is √ [Gm/3d]

Learn more about gravitational potential energy

https://brainly.com/question/3884855

#SPJ1

A 545 N sled is pulled a distance of 385 m. The task is done by pulling on a rope with a force of 1225 N at an angle of 19° with the horizontal. How much work is done in pulling the sled? What is the acceleration in the x direction, assuming that friction is negligible? Assuming the sled started at rest, how long does it take to pull the sled 185 m?

Answers

The work done in pulling the sled is 445,930.2 Joules.

The acceleration in the x direction, assuming that friction is negligible, is  20.85 m/s².

Time taken to pull the sled 185 m is 4.21s.

What is work done?

Work done is equal to product of force applied and distance moved.

Given is a 545 N sled is pulled a distance of 385 m. The task is done by pulling on a rope with a force of 1225 N at an angle of 19° with the horizontal.

Work = Force x Distance x cos(angle)

W= 1225 x 385 x cos 19°

W = 445,930.2 Joules

Thus, the  work done in pulling the sled is 445,930.2 Joules

From the Newton's second law of motion, we have'

F = ma

acceleration, a = 1225cos19° / ( 545 /9.81)

a = 20.85 m/s²

Thus, the acceleration in the x direction is  20.85 m/s²

Using the second equation of motion, we get

s = ut+ 1/2 at²

Substitute the values, we have

185 m = 0 +1/2 x 20.85 x t²

t = 4.21 s

Thus, the time taken to pull the sled 185 is 4.21s.

Learn more about Work done

brainly.com/question/13662169

#SPJ1

i need help with lab

Answers

(a) The equilibrant C for force of vector A and B is 3.43 N.

(b) The equilibrant C for fx of vector A and B is 2.1 N.

(c) The equilibrant  C, for fy of vector A and B is 2.12 N.

What is equilibrant force?

An equilibrant force is a single force that will bring other bodies into equilibrium.

From configuration 1:

Vector A: mass = 0.2 kg, θ = 20⁰

Vector B: mass = 0.15 kg, θ = 80⁰

Fx = mg cosθ

Fy = mg sinθ

where;

m is mass g is acceleration due to gravity

Vector A

Force of A due to its weight

F(A) = mg

F(A) = 0.2 x 9.8 = 1.96 N

Fx = (0.2 x 9.8) cos(20) = 1.84 N

Fy = (0.2 x 9.8) sin(20) = 0.67 N

Resultant force

R = √(0.67² + 1.84²)

R = 1.96 N

Vector B

Force of B due to its weight

F(B) = mg

F(B) = 0.15 x 9.8

F(B) = 1.47 N

Fx = (0.15 x 9.8) cos(80) = 0.26 N

Fy = (0.15 x 9.8) sin(80) = 1.45 N

Resultant force

R = √(0.26² + 1.45²)

R= 1.47 N

Equilibrant  C of vector A and B

Equilibrant force:

Force, C = 1.96 N + 1.47 N

Force, C = 3.43 N

Equilibrant FX:

Fx, C = Fx(A) + Fx(B)

Fx, C = 1.84 N + 0.26 N = 2.1 N

Equilibrant FY:

Fy, C = Fy(A) + Fy(B)

Fy, C =0.67 N + 1.45 N = 2.12 N

Learn more about equilibrant force here: https://brainly.com/question/8045102

#SPJ1

Two masses, m and 2m, approach each along a path at right angles to each other. After collision, they stick together and move of at 2m/s at angle 37⁰ to the original direction of the mass m. What where the initial speeds of the two particles?

Answers

The initial speed of the object with mass "m" is 4.79 m/s and the initial speed of the object with mass "2m" is 1.81 m/s.

Initial speed of the two masses

The initial speed of the two masses is calculated by applying the principle of conservation of linear momentum as follows;

m₁u₁ + m₂u₂ = v(m₁ + m₂)

let m be in horizontal directionlet 2m be in vertical directionangle between the two masses = 90 degreesin y - direction

[tex]m_1u_1sin(\theta_1) + m_2u_2sin(\theta_2) = (m_1 + m_2)vsin(\theta_3)\\\\mu_1sin(0) + 2mu_2sin(90) = (m + 2m)(2)sin(37)\\\\2mu_2 = 3.61m\\\\u_2 = \frac{3.61 m}{2m} \\\\u_2 = 1.81 \ m/s[/tex]

in x - direction

[tex]m_1u_1sin(\theta_1) + m_2u_2sin(\theta_2) = (m_1 + m_2)vsin(\theta_3)\\\\mu_1cos(0) + 2mu_2cos(90) = (m + 2m)(2)cos(37)\\\\mu_1 = 4.79 m\\\\u_1 = 4.79 \ m/s[/tex]

Thus, the initial speed of the object with mass "m" is 4.79 m/s and the initial speed of the object with mass "2m" is 1.81 m/s.

Learn more about initial speed here: https://brainly.com/question/24493758

#SPJ1

The heat capacity of nickel is 0.444 J/(g · °C). Calculate the amount of heat needed to raise the temperature of 18 g of nickel from 20 °C to 66 °C. Now imagine those same joules were used instead to accelerate the same mass of nickel from rest. What would be the final speed, in m/s?
Hints:
The formula for kinetic energy is: Ek=1/2 mv^2
For joules needed for heating, use the mass in grams, but for kinetic energy, convert the mass to kilograms.
Round your answer to the nearest whole number.

Answers

The final speed of the nickel at the given quantity of heat is determined as 202.1  m/s.

Final speed of the nickel

Apply the principle of conservation of energy.

Q = mcΔθ

Q = (18)(0.444)(66 - 20)

Q = 367.63 J

Q = K.E = ¹/₂mv²

2K.E = mv²

v = √(2K.E/m)

where;

v is the final speed

v = √(2 x 367.63)/(0.018))

v = 202.1 m/s

Learn more about speed here: https://brainly.com/question/4931057

#SPJ1

Other Questions
express 3256 as the product of power of 10 What geological change and event occurs at a convergent boundary?Plates collide, and a mountain is formed.Plates collide, and a rift valley is formed.Plates move apart, and a trench is formed.Plates move apart, and a volcano is formed. an estimated _____ percent of all college students suffer from ptsd. Operational level management can be supported by the systems except Select one: 01. Transaction Processing System 2. Manufacturing Information System 3. Executive support system 4. Financial management system A hydrate of zinc nitrate has the formula Zn(NO3)2 . xH2O. If the mass of 1 mol of anhydrous zinc nitrate is 63.67% of the mass of 1 mol of the hydrate, what is the value of x? Mark and Don are planning to sell each of their marble collections at a garage sale. If Don has 3 more than 3 times the number of marbles Mark has, how many does each boy have to sell if the total number of marbles is 63 ? A tax credit of $5000 for a person in a 35% tax bracket would reduce a person's taxes owed by? Solve the equation 7(w +13) = 35.) What is the value of w? 15. How many PCs can be connected to a UPS? Which organism does a virus infect?animalsbacteriaplantsfungi There are 4.9875 mol C, 7.9802 mol H,and 2.00 mol O in the sample.Divide each by the smallest number ofmoles. What is the ratio for the H? Which are two possible reasons for the change within the frog population?3.2, 4.8, 7.2, 10.8, The internal energy of a gas is 500 J. The gas is compressed adiabatically, and its volume decreases by 100c * m ^ 3 If the pressure applied on the gas during compression is 3.00 atm, what is the internal energy of the gas after the adiabatic compressio The vertices of an isosceles triangle are A(-4, 0), B(-10, -2) and C(-6, -6).What is the equation of the triangle's line of symmetry?y = - x - 4y = x - 4y = x + 4y = - x + 4 9. Classify the shapes shown below. Write the letter of each shape in the category thatdescribes it. Shapes may fall into more than one category, and not all shapes will beused. what is 5xy-x^2t+2xy+3x^2t when effective leaders hear others complaining about a problem, which action would they most likely take? change in past simple. Gita be here five minutes ago. Select the correct answer.Which value of x makes this equation true?-12x2(x + 9) = 5(x + 4)O A.OB.O C.O D. State powers include defining what is and is not private property True or False?