Explanation:
Calamine solution contains zinc carbonate and is basic in nature. When applied in the skin, it reacts with the acid, and neutralizes its effect, thus giving relief.
A force of 792 mN is applied to a substance with a mass of 295,000 mg.
Determine the acceleration of the particle.
Answer:
Acceleration = 2.68 m/s² (Approx.)
Explanation:
Given:
Force = 792 mN = 0.792 N
Mass = 295,000 mg = 0.295 kg
Find:
Acceleration
Computation:
Acceleration = Force / mass
Acceleration = 0.792 / 0.295
Acceleration = 2.68 m/s² (Approx.)
Which of the following describes an orbital?
What characteristics separate the class Insecta from other classes of the phylum Arachnida
Answer:
Three pairs of walking legs, wings, body divided into three segments, pair of sensory antennae.
Explanation:
What does it mean when a cell is multicellular?
options:
A.) Multicellular organisms are simple. They contain cytoplasm, ribosomes, DNA and a cell membrane
B.) Multicellular organisms are made of many cells and have specialized shapes that allow them to perform specific functions
C.) Multicellular organisms are made of one cell and have simple shapes that allow them to perform multiple functions
D.) Multicellular cells do not come from pre-existing cells.
Answer:
B.) Multicellular organisms are made of many cells and have specialized shapes that allow them to perform specific functions
Explanation:
Multicellular means that there is more than one cell.
Hope this helps!
2.
Aluminium reacts with iron(III) oxide as shown.
iron(III) oxide + aluminium → iron + aluminium oxide
Which statement about this reaction is correct?
A
Aluminium is oxidised.
B
Aluminium oxide is reduced.
C Iron(III) oxide is oxidised.
D
Iron is oxidised.
Answer:
A is the answer..............
.............
What is the formula for Iron(IV) phosphite
Answer:
The answer is Iron phosphide (Fe2P)
If the temperature of a chemical reaction was reduced, how could the reaction rate most likely be increased?
Group of answer choices
decrease the pressure acting on the system
add a chemical inhibitor
decrease the surface area of the reactants
increase the concentration of the reactants
Answer:
Increase the concentration of the reactants.
Explanation:
This question seems vague, but to put it simply, the reaction rate decreases with a decrease in temperature, so we need to find a way to increase the reaction rate again. When you lower temperature, the molecules are slower and collide less. So therefore, in other words, we need to find a way to increase the rate of collisions between molecules. When the temperature drops, if we increase the concentration of the reactants, we are able to increase the rate of collisions between molecules. As a result, reaction rate is increased once again.
If the temperature of a chemical change was reduced,the reaction rate could most likely be increased by increasing the concentration of the reactants.
What is a chemical change?Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical change,here:
https://brainly.com/question/2591189
#SPJ6
A friend tells you that's after a candle burn there is less matter than before the flame was lit is your friend correct explain why or why not
Answer:
See explanation
Explanation:
The law of conservation of matter states that "matter cannot be created or destroyed. In a physical change, substances can change form, but the total mass remains the same."(Virginia)
Hence, the quantity of matter present before and after the candle burn must remain the same in accordance with this law stated above.
Hence, my friend was not correct.
Light-colored moths blend with light-colored tree bark in their environment. A moth with a dark- colored variation blends with dark-colored tree bark but stands out against light-colored bark. What environmental change would give the dark-colored moth in the picture an adaptive advanage and enhance its survival?
A. The dark-colored moth will have an advantage if it begins to feed at night.
B. If the climate warms, dark-colored moths will absorb more heat.
C. Light-colored moths will be killed more readily if the climate cools.
D. If a change in the environment causes most of the trees to darken, the dark-colored moth will have an advantage.
Describe the effect of cooling a gas in a container?
Answer:
By cooling the gas in the container the partial pressure of the gas will cause the gas to condense. Imagine water vapor in a bottle if you cool it down it will condense into droplets as the molecules of gas start to slow down to to lower temp
Explanation:
In order to make 1 batch of cookies it requires 2 cups flour, 3 eggs, and 1 cup sugar. What would be the coefficients for the flour, eggs, and sugar, assuming you wanted to make 10 batches of cookies? Write the coefficients below!
A scientists who studies how water moves around is called......
Answer:
A scientists who studies how water moves around is called "Hydrologist".
chemical bonding explaining
Explanation:
A chemical bond is a lasting attraction between atoms, ions or molecules that enable the formation of chemical compounds. The bond may result frim the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.
Does anyone know how kinetic energy and crater diameter are related??
Answer:
Crater size is related to the mass and velocity of the impacting body. Mass and velocity can be combined to find the kinetic energy of an impactor. ... This fundamental physical relationship allows an estimate of impactor mass to be made from crater diameter.
Explanation:
What is the final temperature of a sample of magnesium (c = 0.24 cal/g°C), if 1835 cal is
added to 612 g of magnesium at an initial temperature of 19.3°C?
Answer:31.8 °C
Explanation:
Delta T=?
C= .24 cal/g°C
M=612g
Q=1835
Delta T= 1835 cal/(.24cal/g°C)(612g)=12.50°C
Intial temp= 19.3°C
Add intial temp to new temp
12.50+19.3=31.8°C
A student mixes a dark green solution with water, and the result is pale green. Is this likely a chemical change or not? Explain.
Answer:
This is not a chemical change
Explanation:
The dark green solution mixed with the water, but the water is still water. There were no bubbles, smell, temperature change, or any other signs of a chemical change
Have a great day!
A student mixes a dark green solution with water, and the result is pale green. This is a physical change.
What are physical change and chemical change?Composition distinguishes a physical change from a chemical change. A physical change is a difference inside the look, smell, or straightforward presentation of a material sample without the need for a change in composition, whereas a chemical change alters the makeup of the substances in issue.
Despite the fact that we refer to them as physical "reactions," nothing is actually changing. A change in the substance in question's elemental composition is necessary for a reaction to occur. So, from now on, we will simply refer to bodily "reactions" as physical changes. A student mixes a dark green solution with water, and the result is pale green. This is a physical change.
Therefore, a student mixes a dark green solution with water, and the result is pale green. This is a physical change.
To know more about physical change and chemical change, here:
https://brainly.com/question/11946229
#SPJ2
314.5g HBr (MMHBr = 80.91g/mol), is mixed into 4.50L solution. Find Molarity (M) of the
solution.
Answer:
[tex]\boxed {\boxed {\sf M \approx0.864 \ M \ HBr}}[/tex]
Explanation:
The molarity of a solution is the moles per liter. It is found using this formula:
[tex]M=\frac { moles \ of \ solute}{liters \ of \ solution}[/tex]
First we must calculate moles, since we are given grams. To convert from grams to moles, the molar mass is used. This is also given to us, it is 80.91 grams per mole. We can use it as a ratio.
[tex]\frac {80.91 \ g \ HBr}{1 \ mol \ HBr}[/tex]
Multiply by the given number of grams.
[tex]314.5 \ g \ HBr *\frac {80.91 \ g \ HBr}{1 \ mol \ HBr}[/tex]
Flip the fraction so the grams of HBr cancel.
[tex]314.5 \ g \ HBr *\frac {1 \ mol \ HBr}{80.91 \ g \ HBr}[/tex]
[tex]\frac {314.5 \ mol \ HBr}{80.91 }=3.88703497714 \ mol \ HBr[/tex]
Now we know the moles, and can calculate the molarity.
There are 3.88703497714 moles of solute and 4.50 Liters of solution.
[tex]M= \frac {3.88703497714 \ mol }{ 4.50 \ L}[/tex]
[tex]M= 0.863785550476 \ mol/ L[/tex]
The original measurements have 4 and 3 significant figures, so we use the lowest number of 3 for our answer. For the number we calculated, that is the thousandth place.
The 7 in the ten thousandth place tells us to round the 3 to a 4.
[tex]M \approx 0.864 \ mol/ L[/tex]
[tex]M \approx 0.864 \ M \ HBr[/tex]
The molarity of the solution is about 0.864 M HBr.
what are the formulas for the following elements?
-Beryllium fluoride
-Barium fluoride
-Strontium sulfide
-Titanium(II) chloride
-Iron(II) sulfate
-Vanadium(III) cyanide
Answer:
Beryllium fluoride - BeF2
Barium fluoride - BaF2
Strontium sulfide - SrS
Titanium(II) chloride - TiCl2
Iron(II) sulfate - FeSO4
Vanadium(III) cyanide - V( CN )3
PLEASE HELPPPPPP
Which of the following statements is correct for the equation shown here?
Which statement compares you tractive forces that hold particles together
Answer:
The answer is Ionic and covalent binding produces compounds, while hydrogen bonding and Van der Waals forces join separate molecules together.
marking brainliest please help
When most liquids freeze, explain what happens to the motion and the space between the atoms.
Answer:
atoms relative motion slow down and begin to vibrate in place
A scientist is using robots to perform thousands of experiments on different
chemical compounds to see how they affect cancer cells. What is this
process called?
A. An intravenous solution
B. Evaluating test results
C. Screening
D. Engineering process
A scientist is using robots to perform thousands of experiments on different chemical compounds to see how they affect cancer cells.This process is called Screening.
What is screening?The method to test diseases and health condition of body used by scientist and doctor is called screening. The screening helps to find problem earlier and treat them.
What is an intravenous solution?The liquid given to replace water, sugar and salt needed if you are ill or having operation.There are three type of an intravenous solution, isotonic, hypotonic and hypertonic.This an intravenous solution used in an intravenous therapy.What is evaluating test?The process by which of system and component are compared against requirement and specification through testing. The result of the evaluating test is called Evaluating test resultsWhat is Engineering process?The process used by Engineer design and create functional products. This process is a series of steps.To learn more about chemical compounds here.
https://brainly.com/question/12166462
#SPJ3
Answer: screening
Explanation:
What is the frequency when the Energy is equal to 4.18 x 10-22 ?|
Answer:
6.31x10¹¹s⁻¹ = Frequency
Explanation:
To convert frequency to energy or vice versa we must use the equation:
e = h*f
Where e is energy in joules (4.18x10⁻²²J)
h is Planck's constant (6.626x10⁻³⁴Js)
Replacing:
4.18x10⁻²²J = 6.626x10⁻³⁴Js*f
6.31x10¹¹s⁻¹ = Frequencywhat is the formula of the compounds in B
pls help
Answer:
PCl3
Explanation:
The molecular formular of a compound shows the exact number of atoms of elements present in the compound. In this illustration, there is one atom of P and 3 atoms of Cl.
The formular is given as; PCl3
Answer:
PCl³
Explanation:
because there are 1 phosphorus atom and 2 chlorine atom.
Match each label below with the appropriate term. Note there may be more than one correct answer.
H-0:
nonbonding electrons
sigma bond
represents two electrons
Answer:
sigma bond
represents two electrons
Explanation:
The bond between hydrogen and oxygen is sigma bond because the bond between hydrogen and oxygen is covalent means sharing of electron takes place between two atoms and we know that sigma bond is also occurs in a covalent bond in which overlapping of atomic orbitals or hybrid orbitals along the bond axis occurs. Both also represent two electrons because both atoms share one electron each so we can say that the two atoms represents two electrons.
Bombardier beetles release a burst of hot chemical spray with a popping sound. The chemical is sprayed from a structure present under the belly of the beetles.
Which is the likely advantage of such a behavior?
It allows the beetles to attract mates.
It allows the beetles to move obstacles out of their paths.
It allows the beetles to escape from predators.
It allows the beetles to stay warm in cold conditions.
It allows the beetles to escape from predators
A pine tree seed was produced by self-pollination. How many parents does this seed have?
A. one
B. two
The pine tree that produced the seed would be the only parent of a pine seed that was formed through self-pollination. So, the correct option is A.
What is Self-pollination?In the process of self-pollination, pollen from one flower or plant fertilizes the egg cells of another flower or plant. For self-fertilization to occur, both male and female reproductive components must be present within the same flower or plant.
The pollen from the male flower component, the anther, is carried to the female component, the stigma, during self-pollination either by the wind or by pollinators like bees, butterflies, or birds.
A pine tree that produces seeds will be the sole parent of pine seeds that form through self-pollination. Self-pollination occurs when pollen from the same pine tree fertilizes the pine tree's own egg cells, producing seeds with the genetic makeup of only one individual.
Therefore, the correct option is A.
Learn more about Self-pollination, here:
https://brainly.com/question/19910654
#SPJ2
i’m not sure if this is even the right subject lol but anyways
List 4 interesting facts about the element Cobalt
Answer:
Cobalt was the first metal to be discovered since prehistoric times and the first metal with a recorded discoverer.
Cobalt-60 is used to create gamma rays which are used to treat cancer and to sterilize medical supplies.
Cobalt is one of only three naturally occurring magnetic metals, making it very useful for the uniquely calibrated magnets found in generators and hard drives. ...
Cobalt has been utilized by man for at least the last 2,600 years, providing blue pigments for glassware and ceramics.
Explanation:
Answer:
- Doesn’t exist naturally on earth.
- Isolated in 18th century
- we use cobalt for magnets
- isn’t rare
i’m not even sure if this is the right subject or like if this is even a question lol anyways
List at least 3 physical or chemical properties of the element Cobalt