Answer:
When the metal reacts with hot, concentrated sulphuric acid, the products of the reaction are copper (II) sulphate, sulphur dioxide and water. Cu + 2H2SO4 = CuSO4 + SO2 + 2H2O. This is a typical redox reaction in which the acid is reduced to SO2, but no hydrogen is produced here
Due today:
How do you think the birds "predicted" Hurricanes
What two processes contributed oxygen to earth’s second atmosphere?
a.photosynthesis and volcanism
b.volcanism and weathering
c.weathering and rainfall
d.photosynthesis and photolysis
The two processes which contributed oxygen to earth’s second atmosphere are photosynthesis and photolysis.
What is photosynthesis?
It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy through the process of cellular respiration.
Some of the energy which is converted is stored in molecules of carbohydrates like sugar and starches which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.
The process begins with proteins absorbing light energy which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.
Learn more about photosynthesis,here:
https://brainly.com/question/29764662
#SPJ6
can anyone help on this?
Answer:
26
Explanation:
The pH of an acidic solution is 5.59. What is [H+]?
Answer:
[H⁺] = 2.57x10⁻⁶ M
Explanation:
This problem can be solved using the definition of pH:
pH = -log[H⁺]
Now we isolate [H⁺] in the equation:
-pH = log[H⁺]
[tex]10^{-pH}[/tex]=[H⁺]
As we are given the pH by the problem, we can now proceed to calculate the [H⁺]:
[H⁺] = [tex]10^{-5.59}[/tex]
[H⁺] = 2.57x10⁻⁶ M
Thus, when the pH of a solution is 5,59; the molar concentration of H⁺ species is 2.57x10⁻⁶.
Plz I need helpppppp
What geologic process creates a stack?
a.river erosion
b.tectonic activity
c.wave erosion
d.glaciation
Answer:
c.wave erosion=>A stack or sea stack is a geological landform consisting of a steep and often vertical column or columns of rock in the sea near a coast, formed by wave erosion.
A mixture of gaseous reactants is put into a cylinder, where a chemical reaction turns them into gaseous products. The cylinder has a piston that moves in or out, as necessary, to keep a constant pressure on the mixture of . The cylinder is also submerged in a large insulated water bath. (See sketch at right.) From previous experiments, this chemical reaction is known to release of energy. The position of the piston is monitored, and it is determined from this data that the system does of work on the piston during the reaction.
Answer:
It is exothermic in nature.
Explanation:
(1) The reaction is exothermic in nature because it releases heat energy.
(2) Yes, the temperature of the water go up as the reaction releases heat energy and the temperature cool down as the heat energy is completely removed from the water.
(3) The piston move in when the pressure in the cylinder decreases and the piston move out when increase of pressure occur.
(4) As the outside movement of piston occurs, so we can say that the gas mixture does work on its surroundings.
(5) The system released 244 kJ of energy, in which only 150 kJ went into the water, then the difference must be the work done by the system on its surroundings.
W = (244 - 150) kJ = 94 kJ
Which statement is true about fossils?
a.Only the remains of animals, and not plant, can be made into a fossil.
b.To officially be a fossil, the remains of an entire organism must be found.
c.The remains of an organism that lived 500 years ago is called a fossil.
d.A fossil is any trace of prehistoric life.
Answer:
d, the remains of an organism have to be 10,000 years old to be classified as a fossile:)
Answer:
(d)
Explanation:took the quiz
which is an example of a sale laboratory procedure
2Fe(s) +3H2SO4(aq) →Fe2(SO4)3(aq) +3H2(g)When 10.3 g of iron are reacted with 14.8 moles of sulfuric acid, what is the percent yield if 5.40 g of "hydrogen gas" are collected?
Answer:
1040%
Explanation:
To solve this question we must convert the mass of Iron to moles in order to find limiting reactant. With limiting reactant we can find the theoretical moles of hydrogen and theoretical mass:
Percent yield = Actual yield (5.40g) / Theoretical yield * 100
Moles Fe -Molar mass: 55.845g/mol-:
10.3g * (1mol / 55.845g) = 0.184 moles of Fe will react.
For a complete reaction of these moles there are necessaries:
0.184 moles Fe* ( 3 mol H2SO4 / 2 mol Fe) = 0.277 moles H2SO4.
As there are 14.8 moles of the acid, Fe is limiting reasctant.
The moles of H2 produced are:
0.184 moles Fe* ( 3 mol H2 / 2 mol Fe) = 0.277 moles H2
The mass is:
0.277 moles H2 * (2.016g/mol) = 0.558g H2
Percent yield is:
5.40g / 0.558g * 100 = 1040%
It is possible the experiment wasn't performed correctly
Why is it hard to predict the weather more than a few days in advance?
Answer:
Because the weather is complex and dynamic.
Explanation:
Please help it’s for 100 points
Has your cell phone ever not had enough battery when you really needed it? What did you do?
Answer:
Yes
Explanation:
There are some times when I will need my cell phones but it will have not battery. At this point, I look for a means to charge it or I could probably use power bank to charge. I always have an extra battery, so when the other battery is flat, I will replace it with the second charged one. But when both batteries are flat, I will look for a means to charge it using generator or wait till I have access to power supply.
Name
Period
GAS STOICHIOMETRY REVIEW
Please answer the following on separate paper using proper units and showing
all work. Please note that these problems require a balanced chemical
equation.
1. Carbon monoxide reacts with oxygen to produce carbon dioxide. If 1.0 L of
carbon monoxide reacts with oxygen at STP,
a. how many liters of oxygen are required to react?
b. How many liters of carbon dioxide are produced?
Answer:
don't trued the ebitly dude. rub
arrange the following in order of ionization energy, Na, Na+, C, O
Answer:
Na+, O, C, Na
(Na+ has more ionization energy and Na has less ionization energy)
A sample of gas initially has a volume of 2.25 L at 350 K and a pressure of 1.75 atm. What will be sample pressure if the volume is
changed to 1.00 L and the temperature to 750 K
O 3.75 atm
O 1.84 atm
O 3.94 atm
O 8.44 atm
O 0.119 atm
Answer:
8.44 atm
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 2.25 L
Initial temperature (T₁) = 350 K
Initial pressure (P₁) = 1.75 atm
Final volume (V₂) = 1 L
Final temperature (T₂) = 750 K
Final pressure (P₂) =?
The final pressure of the gas can be obtained as illustrated below:
P₁V₁/T₁ = P₂V₂/T₂
1.75 × 2.25 / 350 = P₂ × 1 / 750
3.9375 / 350 = P₂ / 750
Cross multiply
350 × P₂ = 3.9375 × 750
350 × P₂ = 2953.125
Divide both side by 350
P₂ = 2953.125 / 350
P₂ = 8.44 atm
Thus, the final pressure of the gas is 8.44 atm.
A chemist prepares a solution of silver(I) nitrate AgNO3 by measuring out 62.3μmol of silver(I) nitrate into a 50.mL volumetric flask and filling the flask to the mark with water.
Calculate the concentration in /molL of the chemist's silver(I) nitrate solution. Be sure your answer has the correct number of significant digit
*please write the answer without any files disturbance*
Answer:
0.0012 mol/L.
Explanation:
From the question given above, the following data were obtained:
Number of mole of AgNO₃ = 62.3 μmol
Volume = 50 mL
Molarity of AgNO₃ =?
Next, we shall convert 62.3 μmol to mole. This can be obtained as follow as follow:
1 μmol = 10¯⁶ mole
Therefore,
62.3 μmol = 62.3 × 10¯⁶
62.3 μmol = 62.3×10¯⁶ mole
Next, we shall convert 50 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
50 mL = 50 mL × 1 L / 1000 mL
50 mL = 0.05 L
Finally, we shall determine the concentration of AgNO₃ in mol/L as follow:
Number of mole of AgNO₃ = 62.3×10¯⁶ mole
Volume = 0.05 L
Molarity of AgNO₃ =?
Molarity = mole /Volume
Molarity of AgNO₃ = 62.3×10¯⁶ / 0.05
Molarity of AgNO₃ = 0.0012 mol/L
Thus, the concentration of AgNO₃ is 0.0012 mol/L
In an aqueous solution at 25°C, if [H30+] = 3.3 * 10^4 M, then [OH-] is:
Answer:
[OH-] = 3.0 x 10^-19 M
Explanation:
[H3O+][OH-] = Kw
Kw = 1.0 x 10^-14
[H3O+][OH-] = 1.0 x 10^-14
[OH-] = 1.0 x 10^-14 / 3.3 x 10^4 = 3.0 x 10^-19
please help does anyone know this// science!
Answer:
its A
Explanation:
The only one that makes sense
How many grams of Mg(NO3), are necessary to
make 1500 mL of a 0.50 M solution?
Answer:
1.1 × 10² g
Explanation:
Step 1: Given data
Concentration of the solution (C): 0.50 M (0.50 mol/L)Volume of solution (V): 1500 mL (1.500 L)Step 2: Calculate the moles of Mg(NO₃)₂ (solute)
Molarity is equal to the moles of solute (n) divided by the liters of solution.
C = n/V
n = C × V
n = 0.50 mol/L × 1.500 L = 0.75 mol
Step 3: Calculate the mass corresponding to 0.75 moles of Mg(NO₃)₂
The molar mass of Mg(NO₃)₂ is 148.3 g/mol.
0.75 mol × 148.3 g/mol = 1.1 × 10² g
please write the equation and help me solve. please no links
Answer: The molality of solution is 1.2 mole/kg
Explanation:
Molality of a solution is defined as the number of moles of solute dissolved per kg of the solvent.
[tex]Molality=\frac{n}{W_s}[/tex]
where,
n = moles of solute
[tex]W_s[/tex] = weight of solvent in kg
Given : 10 g of glycerol is present in 100 g of solution
moles of glycerol = [tex]\frac{\text {given mass}}{\text {molar mass}}=\frac{10g}{92g/mol}=0.108mol[/tex]
mass of water (solvent )= (100-10) = 90 g = 0.09 kg
Now put all the given values in the formula of molality, we get
[tex]Molality=\frac{0.108mol}{0.09kg}=1.2mole/kg[/tex]
Therefore, the molality of solution is 1.2 mole/kg
The force of gravity from Earth to Mars is___
a. less than the force of gravity from Mars to Earth.
b. equal to the force of gravity from Mars to Earth.
less than the force of gravity from mars to earth
1
Select the correct answer.
How long is the term of a federal judge in a constitutional court?
OA.
two years
OB
four years
Ос.
six years
OD.
lifetime
Answer:
Judges and justices serve no fixed term — they serve until their death, retirement, or conviction by the Senate. By design, this insulates them from the temporary passions of the public, and allows them to apply the law with only justice in mind, and not electoral or political concerns.
Which is the best analogy of a wave?
A wave is like building a ramp.
A wave is like shaking a hand.
A wave is like water rippling in a pond.
A wave is like knocking down a building.
The best analogy that can be use to describe a wave is that a wave is like a rippling in a pond.
What is a wave?A wave is a disturbance or vibrations that occur in a particle and travel from one medium to another medium thereby transporting energy form the origin of it to another location where is is utilized.
Therefore, The best analogy of a wave is a wave is like water rippling in a pond.
Learn more about wave below.
https://brainly.com/question/15663649
#SPJ5
Calculate the mass percent of hydrogen in 70 g of C4H8O3?
Answer:
7.14%
Explanation:
From the question,
percentage by mass hydrogen in C₄H₈O₃ (h) = mass of hydrogen present in C₄H₈O₃(m)/molar mass of C₄H₈O₃ (m')
h = (m'/m)×100..................... Equation 1
Given: m' = (14×4)+(1×8)+(16×3) = 56+8+48 = 112 g, m = (1×8) = 8 g
Substitute these values into equation 1
h = (8/112)×100
h = 7.14%.
Hence the percentage of hydrogen in 70 g of C₄H₈O₃ is 7.14%
If an ultraviolet photon has a wavelength of 77.8 nm calculate the energy of one mole ultraviolet photon.
Answer:
Explanation:
E = (hc)/(λ)
E = (6.624x10^(-27))Js x ((3×10^8)ms^(-1)) /
(77.8x10^(-9)m)
E = 2.55 x 10^(-11) J
what are the advantages and disadvantages of rusting
Answer: The rusting of iron is more of a disadvantage than an advantage. Rusting forms an iron oxide which is more brittle than the iron. It less resistance to environmental degradation and permeability by water and air, therefore cannot be used for coating.
Explanation: plzz mark as brainliest
What are types of Kinetic energy?
Answer:
Machical Engery
Electrical Engery
Rhermal Engery
Sound Energy
Explanation:
Explanation:
There are five types of kinetic energy:
RadiantThermalSoundElectrical and Mechanical.Thus, There are five types of kinetic energy
-TheUnknownScientist
1. Which of these is not a macromolecule? a) Alab) protein c) polysaccharide d) nucleic
acid
Answer:
a) alab
Explanation:
Two of the main macromolecules are proteins and nucleic acid, and a polysaccharide is multiple monomers (monosaccharide) that join to create another macromolecule called carbohydrates.
Can somebody please help me!!!
Answer:
javier applied force how this helps
provide the electronic structure diagram of propene showing all molecular orbitals
Answer:
Explanation:The pi-molecular orbitals in propene (CH3-CH=CH2) are essentially the ... This central carbon thus provides two p-orbitals – one for each pi bond – and these two different p-orbitals have to be perpendicular, leading to a twisted structure as shown: ... It all comes down to where the location of the electron-deficient carbon