Answers
Related Questions
How can you increase the current in a circuit?
I. Decrease the potential difference
II. Increase the potential difference
III. Decrease the resistance
Answers
Answer:
By decreasing the resistance
When a 40V battery is connected across an unknown resistor there is a current of 100 ma in the circuit.
Find the value of the resistance of the resister:
Answers
Answer:
R = 400 ohms.
Explanation: Voltage of the battery, V = 40 V. Current in the unknown resistor I = 100mA. Let R is the resistance of the resistor. It can be calculated using Ohm's law it gives the relationship between the voltage, resistance and current.. R = V/I. R = 40 V/10-¹A. R = 400 Ohm's. So, the value of the resistance of the resistor is 400 Ohm's
Can a physical quantity have units but still be dimensionless?
Answers
Answer:
yes
Explanation:
there are other quantities that are dimensionless, but have a unit.
For example, radian is the unit for an angle. But it is dimensionless because it is defined to be the ratio of two lengths.,
a dimensionless quantity will always be independent of the base units — meter, second, kilograms, kelvin, candela, moles, ampere.
Other examples:
1. Mass fraction
2.Mole fraction
both have unit (kg/kg)
Answer:
A quantity that has dimensions must have units. Yes a quantity have units but still be dimensionless for example,unit of angle is radian ,but it is a dimensionless quantity. A dimensionless quantity may have unit. ... A unitless quantity never has a non-zero dimension.
I hope it's helpful!
9. CALCULATE: How much more power is used to move a weight of 500 N a distance of 20 m in 5 s than is used to move a weight of 1,000 N a distance of 30 m in 30 sec?
Answers
Answer:
work = 500*3 = 1500 J
1500J in 5 sec = 300 watts
Explanation:
Answer:
it is using the same power
Explanation:
it is using the same power because it has to move longer and a farther distance while the other one has double the power but less the distance
guys pls thi is my last pointa just answer this!!!!(WILL GIVE BRAINLY) A student takes apart a wooden box. What can they build with the materials from the box?
A) They cannot make anything with the materials.
B) They can make something new with the materials.
C) They can only make a wooden box from the materials.
Answers
Answer:
i guess u could pick "B" :)
Explanation:
Which one of the following best describes a fuse?
Answers
What are the relationships between pressure force and area?
Answers
Answer:
(b) Pressure= Area\Force
Explanation:
(a) Pressure is the force acting perpendicularly on a unit area of the object.
(b) Pressure= Area\Force
(c) Pressure on an area of 10 m^2
Force = 200 N
Pressure = 200\10 = 20Pa
(ii) Pressure of an area 5m^2
Force = 200 N
Pressure = 200\5 = 40Pa
If helpful, please mark as brainliest! =)
Page No.:
Date :
*
What is the physical meaning of emissivity write its unit
Answers
Answer: a measure of the ability of a surface to radiate energy; the ratio of the radiant flux emitted per unit area to that emitted by a black body at the same temperature.
Explanation: hope that helped! (:
what are the different benefit of walking?
Answers
Answer:
U can walk to the bathroom
Explanation:
Anyone knows this? Please answer... Spam will be reported.
Answers
Answer:
The correct option is;
The assertion is correct, but reason wrong
Explanation:
The question is with regards to the relationship between work, energy, power, and velocity
The mass of each of the persons running up the staircase = Different
The time it takes each person to run up the stairs = Equal time
Let, 'm₁' and 'm₂' represent the mass of each of the persons that ran up the stairs and m₁ > m₂
Let 't' represent the equal time it takes then to run up the stairs
Let 'h' represent the height of the stairs
The energy, 'E', it takes to run up the stairs is equal to the potential energy, P.E., obtained at the top of the stairs
P.E. = m·g·h
Where;
m = The mass of the person at an elevated height
g = The acceleration due to gravity = Constant
h = The height reached above ground level
Given that the height reached is the same for both of the persons, we have
For m₁, P.E.₁ = m₁·g·h and for m₂, P.E.₂ = m₂·g·h
Therefore, where, m₁ > m₂, we have;
P.E.₁ > P.E.₂
∴ E₁ > E₂
Power, 'P', is the rate at which energy is expended
∴ Power, P = E/t
∴ P₁ = E₁/t > P₂ = E₂/t
Therefore, the person with the greater mass, 'm₁', uses more power than the person of mass 'm₂', in running up the stairs
Therefore, the assertion is correct
The average velocity, vₐ = (Total distance traveled, d)/(Total time taken, t)
Given that the distance, 'd', covered in running up the stairs by both persons is the same, and the time it takes them to complete the distance, 't', is also the same, we have;
The average velocity of the person with the greater mass m₁ is the same as the average velocity of the person with mass, m₂
Therefore, the reason is wrong
The answer is that the assertion is correct, but reason wrong
ANSWER QUICK PLEASE!!! (WORTH 15 POINTS!)
Kellie is hopping on one foot. Kellie has a mass of 650
newtons and her foot has an area of 0.10 m2.
How much pressure is exerted by her foot on the ground
with each hop?
Answers
Answer:
650 N / 0.10 m2 = 6500 Pa
Explanation:
The pressure that could be exerted on the ground with each top should be 6,500 Pa
Given that,
The mass is 650 newtons.The area should be 0.10m^2We need to determine the pressure.
So, the following formula should be used.
[tex]= \frac{Mass}{area}\\\\= \frac{650}{0.10} \\\\[/tex]
= 6,500 Pa
Therefore we can conclude that the pressure that could be exerted on the ground with each top should be 6,500 Pa.
Learn more about the pressure here: brainly.com/question/23358029
if the battery is a 9-volt battery and the resistance in the circuit is 18 ohm's how much current is flowing through the circuit
Answers
Answer:
0.50 A
Explanation:
According to the formula, V = IR
9 = I×18
I = 9/18
I = 0.50
If the battery is a 9-volt battery and the resistance in the circuit is 18 ohm's then the current is flowing through the circuit would be 0.5 Ampere.
What is resistance?
Resistance is the obstruction of electrons in an electrically conducting material.The mathematical relation for resistance can be understood with the help of the empirical relation provided by Ohm's law.
V=IR
Where V is the voltage
Where I is the current
Where R is the resistance used in the circuit
As for the given problem if the battery is a 9-volt battery and the resistance in the circuit is 18 ohm
By using the ohms
V=IR
By substituting the respective value of voltage and resistance
Voltage is 9 volt in the resistance is 18 ohm
9V = 18*I
I= 0.5 Ampere
Thus, the current flowing through the 9 V battery and a 18 Ohm resistor is 0.5 Ampere.
Learn more about resistance from here
brainly.com/question/14547003
#SPJ2
which of the following instrument measure time most accurately
Answers
Answer:
What are the options???
Answer:
Electronic stopwatch
Explanation:
lectronic stopwatch, stop clock, pendulum clock and hour glass are the instruments used for measuring the time. Among the following, electronic stopwatch has the highest level of accuracy whereas hourglass has the lowest level of accuracy in measuring time.
Lowest form of energy from the sun
Answers
UVA
I'm pretty sure it's UVA :)
An object that is not moving has no energy?
Answers
Answer: A motionless object can have energy. The energy that the object has is called potential energy.
Explanation:
IF you are in Space and push a bowling what happens to you and the bowling ball?
Answers
Answer:
The bowling ball did not change size or shape- the only thing that changed was the amount of gravity that pulls on it. But the mass of the bowling ball would never change. A bowling ball with a mass of 12 pounds on earth will have the mass of 12 pounds on the moon! Mass is the amount of atoms that a space fills.
Explanation:
I hope this helps! :D
The body weighing 8kg moves in a straight line uniformly accelerated with an acceleration of 3m / s? on a horizontal surface, under the action of force 60N.Find a) What is the friction force acting on the body) The coefficient of friction between the body and the surface where it moves
Answers
Answer:
the friction force f=36
and the coefficient of friction =0.45
Which vector has a y-component with a length of 3?
A. C
B. d
C. a
D. b
Answers
Answer:
Option C : a
Explanation:
Buoyancy All soda cans contain the same
volume of liquid, 354 mL, and displace the
same volume of water. What might be a
difference between can that sinks and one
that floats? Hint: Place a full can of regular
soda and a full can of diet soda in water.
Answers
Answer:
The correct answer is - Regular soda can would sink and diet soda can will float.
Explanation:
The correct answer is - Regular soda can would sink and diet soda can will float.
Reason - As diet soda cans contains artificial sweetener so, the weight of the diet soda can is less the the eight of the regular soda so. Due to this reason , diet soda can will float and another one sinks in water.
If the speed of sound in air is 340 m/s, approximately how long will it take the sound of a clap of thunder to travel 2 kilometers?(1 point)
5.9 seconds
3.4 seconds
2.9 seconds
1.7 seconds
Answers
Answer:5.9 Seconds
Explanation: I just took the quiz
The sound of a clap of thunder take 5.9 seconds to travel 2 kilometers.
To determine the correct statement among all the options, we need to know about the relation between speed and time.
What is sound speed?The speed of sound is the distance travelled by sound per unit time Mathematically, it is v=distance/time= 340m/s.What's is the time taken by sound to travel 2 km?We found 340m/s=distance/time. So, time = distance/340= 2000m/340= 5.9 s.Thus, we can conclude that the sound of a clap of thunder take 5.9 seconds to travel 2 kilometers.
Learn more about sound speed here:
brainly.com/question/2142871
#SPJ2
Can anybody answer this question. Please...
Answers
So A is N
C is S
D is N
B is S
I WILL GIVE BRAINLIST TO CORRECT ANSWERSSSS
Examine the symbols below:
Four schematics are shown. Each symbol shows a cell schematic with the plus and minus symbols. Symbol A has the pattern: long, short, long, and short lines. Symbol B has the pattern: long, short, long, short, long, and short lines. Symbol C has the pattern: long and short lines. Symbol D has the pattern: long, short, long, and short but rotated horizontally.
Which image represents a three-battery cell in a circuit? (2 points)
Group of answer choices
Symbol A
Symbol B
Symbol C
Symbol D
Answers
Answer:
The answer is SYMBOL B.
Explanation:
The correct schematic is the one that shows three groups of long and short lines. A schematic with one long and one short (one group) would be a one cell; a schematic with a long, a short, a long, a short (two group), would be a two cell; and a schematic with a long, a short, a long, a short, a long and a short (three group), would be a three cell- hence why the answer is symbol B.
Answer:
Symbol B
Explanation:
I took the test :)
When digging a hole to plant a shrub in hard ground, is it better to use a long-handled or short-handled shovel?
Answers
Answer: long handle
Explanation: they are better for tree planting and other hole-digging. Long shovel handles can reach deep into a hole. And you'll get better leverage, which is easier on your back. ... The lighter the shovel, the easier time you will have digging.
are brought close together?
5. What happens when like magnetic poles
Answers
Answer:
When two magnets are brought together, the opposite poles will attract one another, but the like poles will repel one another. This is similar to electric charges. Like charges repel, and unlike charges attract.
Heat can be transferred through conduction, convection, and radiation. What is necessary in order for heat to be transferred by conduction?
A.
Heat must be transferred through space.
B.
Heat must be transferred in the form of currents.
C.
The substances must be liquids or gases.
D.
The objects must be in direct contact with one another.
Answers
it would be..... C
sorry if I am wrong I tryed to think, At least I try!
A is incorrect here: heat flow via conduction involves high-energy particles (such as atoms or molecules) having their energy transferred to neighboring particles by contact or collision. If “space” refers to a region that contains only gas (the everyday understanding of “space”), then heat transfer by conduction would be extremely inefficient since gas molecules are so far apart. If “space” refers to a vacuum, then conduction cannot occur at all (radiation is the only mode of heat transfer through a vacuum). In either case, not only does conduction not necessitate space, but space impedes heat transfer by conduction.
B is incorrect because conduction operates via the movement of energy itself and not of matter (although, as we established above, the presence of matter is necessary for conduction). Conductive heat transfer can occur within a body itself (a metal bar that is heated on one end will eventually become hot on the other end). So, apart from being definitionally incorrect, conductive heat transfer doesn’t require currents at all. This mode of heat transfer occurs in convection.
C is manifestly incorrect: conductive heat transfer can occur between or within solids, so it can’t possibly be necessary that the “substances . . . Be liquids or gases.
a bicyclist travels with an average velocity of 15 km per hour for 20 minutes what is his displacement in kilometer
Answers
Answer:
5 kilometers
Explanation:
Velocity= 15km/h
Time= 20 minutes = 1/3 hours
Displacement= Velocity x Time
= 15 x 1/3
= 15/3
= 5km
Need help as fast as possible please
Thank you!
Answers
Answer:
b is the answer.. hope it helps
need physics help
ASAP please!
Answers
Answer:
D
Explanation:
In what way could a random mutation provide an organism with
an advantage?
Answers
Answer:
They are called beneficial mutations. They lead to new versions of proteins that help organisms adapt to changes in their environment. Beneficial mutations are essential for evolution to occur. They increase an organism's changes of surviving or reproducing, so they are likely to become more common over time.
Explanation:
things plants make during photosynthesis
Answers
Answer:
glucose
Explanation:
convert starch to glucose
Answer:
During the process of photosynthesis, cells use carbon dioxide and energy from the Sun to make sugar molecules and oxygen. These sugar molecules are the basis for more complex molecules made by the photosynthetic cell, such as glucose.
I hope it's helpful!