Select the correct word or phrase to complete the statements about ionic compounds.

The melting point of an ionic compound is likely to be
a molecular compound.

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\ [/tex]

From the question

mass = 87.3 g

density = 3.14 g/mL

We have

[tex]volume = \frac{87.3}{3.14} \\ = 27.8025477...[/tex]

We have the final answer as

Hope this helps you

Answer:

no d

Explanation:

it has a permanent dipole

CH₃F compound contains polar covalent bonds in its structure, hence option D is correct.

This happens when the electronegativity of the relevant atoms differs significantly.

The electronegativities of the carbon and fluorine atoms in CH3F are dissimilar. Because fluorine is more electronegative than carbon, it attracts the shared electrons to it, giving the fluorine atom a partial negative charge and the carbon atom a partial positive charge.

A polar covalent bond is created as a result of this unequal charge distribution. CH₃F compound contains polar covalent bonds in its structure.

Learn more about polar covalent bond, here:

https://brainly.com/question/28295508

#SPJ2

Answer:2m

Explanation:

4/2=2

The wavelength will be "2 m".

Given values are:

Frequency,

Speed,

As we know,

→ [tex]Frequency(f) = \frac{Speed (v)}{Wavelength (\lambda)}[/tex]

or,

→                     [tex]\lambda = \frac{v}{f}[/tex]

By substituting the values, we get

→                        [tex]=\frac{4}{2}[/tex]

→                        [tex]= 2 \ m[/tex]

Thus the above response is correct.

Learn more about wavelength here:

https://brainly.com/question/9583725

Answer:

Theories

Explanation:

It is theories because it was a generalistee abstract or thinking generalising the principle of fact about Earth tectonic plates ,it was formulated and concluded as plate tectonic theories after many findings. The theories conclude that the Earth has an outer layer called lithosphere and lies overly a plastic layer called asthenosphere. The lithosphere is divided into several plates and they move close to each other where they diverge, converge or slip over one another.

Answer:

Geology is the world... Elements make it up

Explanation:

Answer:

A lot of the elements are found in rocks, minerals, and well since they are elements make they make up everything on earth.

Explanation:

Answer:

NaCl(aq)

Explanation:

Nacl(aq) is an electrolyte when it melts and it conducts electricity. This is due to the fact that when it is in solution, it dissociates to be Na+ and Cl-. These ions are conductors of electricity. It conducts electricity because of the movements and also the discharge of ions. CH3OH(aq) is not a conductor of electricity therefore the first option is the answer.

Answer:

I literally got this from google.

Explanation:

In ordinary air, sodium metal reacts to form a sodium hydroxide film, which can rapidly absorb carbon dioxide from the air, forming sodium bicarbonate. ... In a comparatively dry atmosphere, sodium burns quietly, giving off a dense white caustic smoke, which can cause choking and coughing.

Happy almost Halloween! :)

Answer:

0.0181 mol H

Explanation:

Step 1: Given data

Moles of water (H₂O) formed during the analysis: 0.00905 mol H₂O

Step 2: Calculate the amount (mol) H in 0.00905 mol H₂O

According to the chemical formula of water, the molar ratio of water to hydrogen is 1:2, that is, there are 2 moles of H per 1 mole of H₂O. We will use this conversion factor to calculate the moles of H in 0.00905 moles of H₂O.

0.00905 mol H₂O × (2 mol H/1 mol H₂O) = 0.0181 mol H

Answer:

Explanation:

Iodine is the most flexible of the atoms in Group 17 of the periodic table. It can have more than 1 charge, especially when combined with oxygen. The answer that you are expected to give, I think is C. Iodine's dominant charge is - 1

We know,

[tex]\Delta H_{I_2(g)}=62.438\ KJ/mol\\\\\Delta H_{Cl_2(g)}= 0.0\ KJ/mol\\\\\Delta H_{ICl(g)}=17.78\ KJ/mol[/tex]

For given reaction, [tex]I_2(g)+Cl_2(g)\ -->\ 2ICl(g)[/tex]

[tex]\Delta H_{rxn}=2\Delta H_{ICl(g)}-\Delta H_{I_2(g)}-\Delta H_{Cl_2(g)}\\\\\Delta H_{rxn}=2(17.78)-0-62.438\ KJ/mol\\\\\Delta H_{rxn}=-26.878\ KJ/mol[/tex]

For , 2.41 moles of [tex]I_2[/tex] :

[tex]\Delta H_{rxn}=2.41\times (-26.878)\ KJ\\\\\Delta H_{rxn}=-64.78\ KJ[/tex]

We know :

[tex]\Delta S = -\dfrac{\Delta H_{rxn}}{T}\\\\\Delta S = -\dfrac{-64.78}{298}\ KJ/K\\\\\Delta S =-0.21738 \ KJ/K\\\\\Delta S=-217.38\ J/K[/tex]

Hence, this is the required solution.

Answer:

[tex]a=\frac{f}{d-e}-\frac{b}{c}[/tex]

Explanation:

Hello.

In this case, for the equation:

[tex](a+b/c)(d-e)=f[/tex]

For isolating a, we must first pass (d-e) to divide at the other side as it is initially multiplying:

[tex]a+b/c=\frac{f}{(d-e)}[/tex]

Next, as b/c is adding, it passes to subtract at the other side in order to finally isolate a:

[tex]a=\frac{f}{d-e}-\frac{b}{c}[/tex]

Best regards!

Answer:

12 pm

Explanation:

Step 1: Given data

Step 2: Calculate the kinetic energy (E) of an electron

We will use the following expression.

E = 1/2 × m × v²

E = 1/2 × 9.11 × 10⁻³¹ kg × (1.9 × 10⁸ m/s)²

E = 1.6 × 10⁻¹⁴ J

Step 3: Calculate the wavelength of an electron

We will use the following expression.

E = h × c / λ

λ = h × c / E

λ = 6.63 × 10⁻³⁴ J.s × 3.00 × 10⁸ m/s / 1.6 × 10⁻¹⁴ J

λ = 1.2 × 10⁻¹¹ m

Step 4: Convert "λ" to picometers

We will use the relationship 1 m = 10¹² pm.

1.2 × 10⁻¹¹ m × (10¹² pm/1 m) = 12 pm

The wavelength of the beam of electrons is 3.8 pm.

Using the De Broglie relation;

λ = h/mv

λ  = wavelength

h = Plank's constant

m = mass of the object

v = speed of the object

Now;

λ  = ?

h = 6.6 × 10^-34 Js

m = 9.11 × 10^-31 kg

v =  1.9 × 10^8 m/s

So;

λ  =  6.6 × 10^-34 Js/ 9.11 × 10^-31 kg × 1.9 × 10^8 m/s

λ  = 6.6 × 10^-34  /1.73  × 10^-22

λ  = 3.8  × 10^- 12 m or 3.8 pm

Learn more: https://brainly.com/question/9743981

Answer:

D

Explanation:

It is a solid everything that is a solid is heavier

Answer:

The answer is B(scale)

Explanation:

Since the question asked about a range, the scale would be the most logical answer since scales are used to measure.

Answer:

the answer is C.

Explanation:

Answer:

A family is a vertical column .

The elements in a family have similar chemical properties.

Answer:

immiscible liquids

Explanation:

When two liquids are to be used for the purpose of recrystallization the both liquids must be miscible with each other in all proportions.

This implies that, if two liquids are immiscible, it will be difficult for the mixture to be useful in recrystallization.

Water and hexane are immiscible because water is a polar solvent and hexane is a non polar solvent.

Water is miscible with ethanol because ethanol contains polar -OH groups that interact effectively with water leading to miscibility of ethanol with water in all proportions.

Volume can be calculated by using division calculation between  Molarity and number of moles. The volume of 0.20 M NaCl(aq) containing 10.0 g of NaCl is 0.86L.

Molarity can be calculated by dividing  number of moles of solute by volume of solution in liter. Molarity is affected by temperature. Its unit is mole/litre. It measure the concentration of any solute in a solution.

Other concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution.

Mathematically,

Molarity= number of moles of solute÷volume of solution in litre

Where,

moles= given weight÷by molecular weight

         = 10/ 58

Substituting values in equation 1

volume=10÷(58×0.20)

volume= 10÷11.6

volume=0.86L

Therefore, The volume of 0.20 M NaCl(aq) containing 10.0 g of NaCl is 0.86L.

Learn more about the molarity, here:

https://brainly.com/question/16727614

#SPJ2

Answer:

the bike will go down 5 N

Answer: The glass cup falling

Explanation:

It didnt change chemically, only its physical appearance

Answer:

2.75 g

Explanation:

The number of moles of KOH is obtained from the equation;

n=CV

C= concentration

V= volume of solution

n= 0.527 × 25.6/1000

n= 0.0135

Reaction equation;

KOH(aq) + KHC8H4O4(aq) --->(KC8H4O4)K(aq) + H2O(l)

1 mole of KHP reacts with 1 mole of KOH

Hence; 0.0135 moles of KHP reacts with 0.0135 moles of KOH

From;

Number of moles = reacting mass/molar mass

Reacting mass = 0.0135 × 204

= 2.75 g of KHP

Answer:

The percentage yield of copper will exceed 100%

Explanation:

In the presence of impurities, the percentage yield of a substance usually exceeds 100%.

This implies that, when the unreacted zinc impurity is not removed from the reaction mixture and the percentage yield of copper is calculated, the actual yield will become greater than the theoretical yield thereby making the percentage yield of copper to be above 100%

Answer:

True

Explanation:

Because atoms with the same number of valence electrons react in similar ways with other elements.

Answer:  D) 11

Explanation:

We have 1 iron atom (the Fe)

We have 5 carbon (denoted [tex]C_5[/tex])

We have 5 oxygen atoms (denoted [tex]O_5[/tex])

So we have 1+5+5 = 11 atoms in this compound.

In one formula unit of  [tex]\rm FeC_5O_5[/tex], the number of atoms of oxygen has been 5. Thus , option B is correct.

Formula unit has been the empirical representation of the chemical compound. The formula has been responsible to deliver the information about the number of atoms of each elements present in the sample.

The given compound has been [tex]\rm FeC_5O_5[/tex]. The formula has subscript with each element representing the number of atoms.  The atoms of each element has been:

The number of atoms of oxygen present in one formula unit of [tex]\rm FeC_5O_5[/tex] has been 5. Thus , option B is correct.

For more information about the formula unit, refer to the link:

https://brainly.com/question/19293051

Answer:D

Explanation: in molecular solids, one factor that determines the strength of intermolecular forces is the mass of the molecules. Since all of these compounds only contain hydrogen and carbon we don’t have to worry about their polarities as they are all the same. Inter molecular forces tend to be stronger when the molecular weight is greater since paraffin wax is the only solid at room temperature it has the highest melting point

Answer: Your Answer Is D. Paraffin wax

Explanation:Hope This Helps!

Answer:

See explanation

Explanation:

The compound ClO2 has 19 valence electrons.  ClO2 is a bent molecule with tetrahedral electron pair geometry but has two  lone pairs of electrons. This is indicated by the presence of four electron pairs on the outermost shell of the central atom.

The molecule has an odd number of valence electrons, hence, it is generally regarded as a paramagnetic radical. None of the proposed Lewis structures for the molecule is satisfactory because none of them obeys the octet rule.

From the images attached, one can easily see that the electron dots around the oxygen and chlorine atoms does not satisfy the octet rule in all the resonance structures shown.

Answer:

an insoluble substance which is the main constituent of plant cell walls and of vegetable fibers such as cotton. It is a polysaccharide consisting of chains of glucose monomers.

Cellulose is the main substance in the walls of plant cells, helping plants to remain stiff and upright. Humans cannot digest cellulose, but it is important in the diet as fibre. Fibre assists your digestive system – keeping food moving through the gut and pushing waste out of the body.

Explanation:

Answer:

Hello! The main chemical component in cell walls is a complex carbohydrate called cellulose. Cellulose is made of thousands of sugar molecules linked end to end. It is extremely durable, which makes it useful for paper, linen, and cotton products. So the answer to your question is: Cellulose is a very complex carbohydrate that is found in plant walls. In fact, it is the basic structural component in plant walls.

Explanation:

Hope this helped!

Answer:

The answer is "Option a".

Explanation:

Multiply the mass of the solutions by 3.17% to get the mass of [tex]BaCl_2[/tex]:

[tex]\to 427 \ g \times 0.0317 = 13.56\ g[/tex]

Divide this mass with BaCl2's molecular concentration to acquire the mole ratio:  

[tex]molar mass = 208.24 \frac{g}{mol}\\\\moles = \frac{13.56}{208.24} = 0.065 \ moles \\\\[/tex]

                       [tex]= 6.5 \times 10^{-2} \ moles[/tex]

A 427 g sample is 3.17% by mass barium chloride contains 6.5 × 10⁻² moles of BaCl₂.

A 427 g sample is 3.17% by mass barium chloride, that is, there are 3.17 g of barium chloride per 100 g of sample.

The mass of barium chloride in 427 g of the sample is:

[tex]427gSample \times \frac{3.17gBaCl_2}{100gSample} = 13.5gBaCl_2[/tex]

We can calculate the number of moles in 13.5 g of barium chloride using its molar mass (208.23 g/mol).

[tex]13.5 g \times \frac{1mol}{208.23g} = 6.5 \times 10^{-2} mol[/tex]

A 427 g sample is 3.17% by mass barium chloride contains 6.5 × 10⁻² moles of BaCl₂.

Learn more: https://brainly.com/question/12127540

Answer:

a.  very acidic

Explanation:

A solution with a pH of 1.6 would be described as a very acidic solution.

The pH scale is a convenient scale for expressing the level of acidity or alkalinity of aqueous solutions.

The scale ranges from 1 to 14 in which case 1 is the lower limit and 14 the upper limit.  

Answer:

pH = 11

Explanation:

The equilibrium of a weak base as NaCN in water is:

NaCN(aq) + H₂O(l) ⇄ OH⁻(aq) + Na⁺(aq) + HCN(aq)

And kb, the equilibrium constant, is:

Kb = [OH⁻] [HCN] / [NaCN]

Where Kb of NaCN is 2.04x10⁻⁵

In the beginning, the [NaCN] is 0.050mol / L = 0.050M.

Both [OH⁻] and [HCN] are produced from this equilibrium, and its concentration is X, that is:

2.04x10⁻⁵ = [X] [X] / [0.050M]

1.02x10⁻⁶ = X²

X = 1x10⁻³ = [OH⁻]

As pOH = - log [OH⁻]

pOH = 3.00

And pH = 14 - pOH