1 mole is equal to 6.0220 x 1023 atoms of any element.
what is the empirical formula for a compound if a sample contains 1.0 g of S and 1.5 g of O?
1.SO
2.SO3
3.S202
4. S203
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
O 1 mol of oxygen has fewer molecules.
O 1 mol of oxygen has more molecules.
O Each sample has the same number of molecules.
O The molecules cannot be compared without knowing the mass.
Mark this and return
4
Save and Exit
Next
Subinit
Answer:
Each sample has the same number of molecules.
Explanation:
This is true by Avogadro's law.
Eric pours some iced tea into a glass. When he puts the iced tea in the glass, the energy of the glass decreases. What must be true of the energy of the iced tea?
Iced tea's energy increases while the energy of the glass decreases.
What is energy?Energy is the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other forms
Iced tea's energy increases while the energy of the glass decreases because the ice is getting warmer so the glass is also getting warmer. meaning that the glass is decreasing in energy while the ice tea is increasing in energy.
Hence, iced tea's energy increases while the energy of the glass decreases.
Learn more about the energy here:
https://brainly.com/question/1932868
#SPJ1
Question 1 of 32
How does soil begin to form?
A. Rock particles clump together in an aggregate.
B. Sediment stays and settles in a location.
C. Bedrock breaks down into smaller particles.
D. Sediment moves to a new location.
Which of the following reactions depicts a synthesis reaction?
Answer:
C combination reaction (synthesis) reaction
Explanation:
two chemicals are combined
What happens is the PH changes
The changes in different properties such as concentration etc will change if the pH experiences a change.
What is pH?
This is referred to the power of hydrogen and is a measure of the degree of acidity or alkalinity of a substance.
When pH changes, the concentration as well as other properties in this context.
Read more about pH here https://brainly.com/question/22390063
#SPJ12
What is the change in freezing
point, ATf, when the 0.195 m
aqueous solution of K2S dissolves
into 3 particles?
The change in the freezing point of the solution is 1.1°C.
What is freezing point depression?The freezing point depression is a colligative property thus we must take note of the number of particles in solution.
Using;
ΔT = k m i
k = 1.86 °C/m
m = 0.195 m
i = 3
ΔT = 1.86 °C/m * 0.195 m * 3
ΔT = 1.1°C
Learn kore about freezing point:https://brainly.com/question/3121416
#SPJ1
Answer:
1.0881
Explanation:
Correct answer for Acellus
Scientists used alpha particles to investigate models of the atom. Figure 4 shows an alpha particle scattering experiment.
Explain how scientists used the results from the experiment to :
disprove the plum pudding model
give evidence for the new nuclear model
Answer:
See attached image.
Explanation:
Calculate the percent covalent character of a chemical bond between iodine and lithium.
Answer:
27966692
Explanation:
I don't know if this is right or not
It requires 2,500 joules to raise a certain amount of water (c = 4.186 j/g°c) from 20.0°c to 60.0°c. what is the mass of the water that is being heated? 15 g 40 g 63 g 80 g
Answer:
15 grams of water will absorb 2,500 Joules in going from 20.0 to 60.0 C.
Explanation:
The heat involved in raising a mass (m) of a substance with a specific heat (c) from one temperature to another (Delta T) is given by:
Heat = mc(Delta T)
2,500 Joules = m*(4.186J/gC)*(60C-20C)
2,500 Joules = m*(4.186J/gC)*(40C)
2,500 Joules = m*(4.186J/gC)*(40C)
m = (2,500J)/(4.186*40J/g)
m = 14.93 grams
Answer: B (15g)
Explanation:
N₂(g) + 3H₂(g) → 2NH3(g)
224 L of nitrogen reacts with
excess hydrogen at 2773 K and
95.0 atm. How many moles of
nitrogen react?
Answer:
93.5 moles N₂
Explanation:
To find the moles, you need to use the Ideal Gas Law. The equation looks like this:
PV = nRT
In this equation,
-----> P = pressure (atm)
-----> V = volume (L)
-----> n = number of moles
-----> R = constant (0.0821 atm*L/mol*K)
-----> T = temperature (K)
You can plug the given values into the equation and simplify to find moles. The final answer should have 3 sig figs to match the lowest number of sig figs among the given values.
P = 95.0 atm R = 0.0821 atm*L/mol*K
V = 224 L T = 2773 K
n = ?
PV = nRT
(95.0 atm)(224 L) = n(0.0821 atm*L/mol*K)(2773 K)
21280 = n(227.6633)
93.5 = n
Answer:
93.5 moles N₂
Explanation:
You can plug the given values into the equation and simplify to find moles. The final answer should have 3 sig figs to match the lowest number of sig figs among the given values.
P = 95.0 atm R = 0.0821 atm*L/mol*K
V = 224 L T = 2773 K
n = ?
PV = nRT
(95.0 atm)(224 L) = n(0.0821 atm*L/mol*K)(2773 K)
21280 = n(227.6633)
93.5 = n
Explanation:
What will be the next step in this calculation?
V = 2.188x10^6 x 2
————————
3
V = Answer
————
3
V = (what you got)
Try finding them with calculator or something.
Hope this helps.Good luck ✅.And I wish this can still help.calculate mole fraction of benzene (70 g) having 30 gram of mass of carbon tetrahedral
Answer:
0.736
Explanation:
*I am not sure what you mean by "carbon tetrahedral". I'm assuming you are just referring to individual carbon.*
To find the mole percent, you need to (1) convert grams benzene and grams carbon to moles (via their molar masses) and then (2) calculate the mole fraction (via the mole fraction formula).
(Step 1)
Benzene = C₆H₆
Molar Mass (C₆H₆) = 6(12.01 g/mol) + 6(1.008 g/mol)
Molar Mass (C₆H₆) = 78.108 g/mol
70 g C₆H₆ 1 mole
--------------- x ------------------ = 0.896 mole C₆H₆
78.108 g
Molar Mass (C) = 12.01 g/mol
30 g C 1 mole
------------ x ----------------- = 2.50 mole C
12.01 g
(Step 2)
moles solute
Mole Fraction = ----------------------------------------------
moles solute + moles solvent
2.50 mole C
Mole Fraction = ------------------------------------------------- = 0.736
(0.896 mole C₆H₆ + 2.50 mole C)
What is the mass percent of Fe in iron(II) chloride
What is the name of this hydrocarbon?
hexane
O heptane
O octane
O pentane
Mark this and return
H H H H H
|||||
H-C-C-C-C-C-H
|||II
H H H H H
Save and Exit
Next
Submit
Answer:
alkanes alkens alkenes and a bromatic hydrocarbons
Answer:
[tex]\huge\boxed{\sf Pentane}[/tex]
Explanation:
The given compound has:5 carbonsall single bondsPrefix for 5 carbons = Pent
Suffix for all single bonds = ane (since the compound is alkane)
So, the name of this hydrocarbon is:
Pentane[tex]\rule[225]{225}{2}[/tex]
How many grams of nitrogen,
N2, would be required to react with
6.25 moles hydrogen, H2?
N₂ + 3H₂ → 2NH₃
moles N₂ = 1/3 x 6.25 = 2.083
Answer:
2.083 moles of N₂ would be required to react with 6.25 moles of H₂.
Explanation:
Let us first write the balanced chemical equation :
N₂ + 3H₂ → 2NH₃
Therefore from this equation it is clear that:
3 moles of H₂ require 1 mole of N₂
∵ 1 mole of H₂ requires [tex]\frac{1}{3}[/tex] moles of N₂
∵ 6.25 moles of H₂ requires [tex]\frac{(1*6.25)}{3}[/tex][tex]=2.083[/tex] moles of N₂
MOLE CONCEPT :
The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter. A mole is defined as the amount of substance containing the same number of discrete entities (such as atoms, molecules, and ions) as the number of atoms in a sample of pure 12C weighing exactly 12 g. One Latin connotation for the word “mole” is “large mass” or “bulk,” which is consistent with its use as the name for this unit. The mole provides a link between an easily measured macroscopic property, bulk mass, and an extremely important fundamental property, number of atoms, molecules, and so forth.
To know more about mole concept refer to:
https://brainly.in/question/1062729
#SPJ12
PLEASE HELP FAST! What is the percent yield if 0.856 g of NO is actually obtained in the lab during the following reaction: 4NH3 + 5O2 --> 4NO + 6H2O . 6.3 g of Ammonia was reacted with 1.8 g of Oxygen?
Options:
A. 20.1%
B. 53.5%
C. 89.4%
D. 63.4%
The percent yield of the reaction is 63.4%; option D
What is percent yield?Percent yield of a reaction is given as:
Percent yield = actual yield/expected yield * 100 %Actual yield of the reaction = 0.856 g
Expected yield = 1.8/32 * 4/5 * 30 = 1.35 g
Percent yield = 0.856/1.35 * 100 % = 63.4 %
Therefore, the percent yield is 63.4%.
Learn more about percent yield at: https://brainly.com/question/17127987
#SPJ1
Fluorite is..
a. harder than apatite but softer than calcite
b. harder than gypsum but softer than apatite
c. harder than calcite but softer than feldspar
d. harder than feldspar but softer than apatite
Fluorite is harder than gypsum but softer than apatite. Thus, the correct option is B.
What is the hardness of any element?The hardness of any element may be defined as the capability of a material to oppose the process of deformation and remains in actual shape precisely.
According to the table of hardness scales by Mohs, the increasing order of given hardness of given elements is as follows:
Gypsum < Fluorite < Apatite.
Therefore, Fluorite is harder than gypsum but softer than apatite. Thus, the correct option is B.
To learn more about the Hardness of elements, refer to the link:
https://brainly.com/question/23721736
#SPJ1
Which is not a characteristic of a compound?
has different properties from its component elements
different samples have different properties
can be represented by a chemical formula
a pure substance made of two or more elements
What type of molecule is pentanal?
o a. aldehyde
o b. ester
o c. ketone
o d. alcohol
Answer:
aldehyde
Explanation:
it ends with "al" of "al"dehyde, always check the end
A student spilled a bottle of ammonia in one corner of the laboratory. Soon the whole laboratory was felled with pungent irritating small. The students immediately opened the windows and doors and switched on the exhaust fans. After sometime, students got relief. Explain what did actually happen?
Answer: Initially when the student spilled the bottle of ammonia the ammonia gas particles diffused with the particles of air in the room. We know that the rate of diffusion of gases is very high. So the entire room filled up with the pungent smell of ammonia.
When he opened the doors and windows and switched on the exhaust fan, the air from the room along with the ammonia gas diffused with the air outside the room.Moreover, outside air entered into the room so the concentration of ammonia gas in the room air reduced.Due to these reasons the student got relief.
Rosalind franklin helped discover the structure of what molecule?.
That would be...*drumroll* the structure of DNA!
does anyone understand these?
Answer:
6) 47588
4.7 * 10 power 4 ( by rounding off)
7) 1 mm ---> 1,000,000
? 120
120 * 1 / 1000000
12/ 100000
0.0012
1.2 * 10 power -4.
8) Volume is the amount of space something occupies
Answer this please!!!
Answer:
c
Explanation:
The answer is both i and iii.
: 2NaOH + H,S0A - Na,SO A + 2H,0 How many moles of sodium sulfate (Na,SO,) reproduced when 5.0 moles of sodium hydroxide (Na0H) are reacted with excess sulfuric acid? A 2.5 moles B 1.0 moles C 5.0 moles D 2.0 moles
From the reaction, we can see that the number of moles produced is 2.5 moles of Na2SO4
What is a reaction?Chemical reaction involves the combination between two or more species. In this case, the reaction equation is; 2NaOH + H2S04 ----> Na2SO4 + 2H20.
Now we are told that sulfuric acid is in excess hence NaOH is the limiting reactant.
If 2 moles of NaOH produces 1 mole of Na2SO4
5 moles of NaOH produces 5 moles * 1 mole/ 2 moles
= 2.5 moles of Na2SO4
Learn more about chemical reaction:https://brainly.com/question/22817140
#SPJ1
Given the balanced equation representing a
reaction:
2H₂ + O₂ → 2H₂O + energy
4. Which mass of oxygen completely reacts with
4.0 grams of hydrogen to produce 36.0 grams of
water?
(1) 8.0 g
(2) 16.0 g
(3) 32.0 g
(4) 40.0 g
Answer: it would be number 3, 32.0g
The greatest progress in reducing atmospheric levels of lead pollution resulted from Group of answer choices the switch from lead to graphite in pencils. new types of lead scrubbers on smokestacks that removed lead from the air. the development of new types of batteries that use lithium instead of lead. the elimination of leaded gas.
The greatest progress in reducing atmospheric levels of lead pollution resulted from the elimination of leaded gas.
What is atmospheric lead pollution?Atmospheric lead pollution refers to the presence of lead particles in the atmosphere.
Lead is a pollutant which affects the respiratory system.
Fuels that contains lead when burned releases lead into the atmosphere.
Therefore, the greatest progress in reducing atmospheric levels of lead pollution resulted from the elimination of leaded gas.
Learn more more about atmospheric lead pollution at: https://brainly.com/question/4342861
#SPJ1
10 uses of metals in daily life
Answer:For jewellery and ornaments, gold, platinum and silver are being used.
For building purposes, iron and steel can be used.Iron and aluminium are used as utensils.
The thermometer uses mercury and helps to monitor the temperature.
The insulation wires are made of aluminium.
Aluminium foils are being used as wrappers for food.In sweets, a silver foil is being used.
To avoid rusting, zinc is used for galvanizing.In vehicles, iron is being used.
For making cable wires, copper is being used.
Explanation:
Answer:
1. For jewellery and ornaments, gold, platinum and silver are being used.
2. For building purposes, iron and steel can be used.
3. Iron and aluminium are used as utensils.
4. The thermometer uses mercury and helps to monitor the temperature.
5. The insulation wires are made of aluminium.
6. Aluminium foils are being used as wrappers for food.
7. In sweets, a silver foil is being used.
8. To avoid rusting, zinc is used for galvanizing.
9. In vehicles, iron is being used.
10. For making cable wires, copper is being used.
The volume of a gas is inversely proportional to the pressure of a gas is known as:.
Answer:
Boyle's law states this.
If 19.4 mL of a Ca(OH)₂ solution are needed to neutralize 31.5 mL of 0.1 M HC₂H302 solution, what is the concentration (molarity) of the
Ca(OH)₂ solution?
Select one:
O a. 0.009 M
O b. 1.6 M
OC 0.08 M
O d. 0.1 M
The concentration (molarity) of the Ca(OH)₂ solution needed to neutralize 31.5 mL of 0.1 M HC₂H302 solution is 0.162M (option D).
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
CaVa = CbVb
Where;
Ca = concentration of acidCb = concentration of baseVa = volume of acidVb = volume of base31.5 × 0.1 = 19.4 × Cb
3.15 = 19.4Cb
Cb = 0.162M
Therefore, the concentration (molarity) of the Ca(OH)₂ solution needed to neutralize 31.5 mL of 0.1 M HC₂H302 solution is 0.162M.
Learn more about molarity at: https://brainly.com/question/2817451
#SPJ1